SAP 4.7 / ECC 6.0 integration with POS

Hi Experts,
Is it possible to use POS with SAP 4.7 or ECC 6.0 without using IS Retail. If possible can you please explain how can we do that ?
Thanks
Christine

this is not the forum to post your MM question???!! Post in appropriate forum.
--Ragu

Similar Messages

ECC 6.0 integration with Microsoft Dynamics CRM

Hi All
I am working on a ECC 6.0 integration with Microsoft Dynamics CRM. I need to send the customer master data, va01/va02, vl01n/vl02n/ vf01/vf02 to CRM system. One option I have is to send in the form of IDOC with TRFC - TCP/IP. But looks like this needs a middleware like Biztalk.
Is there a way I can send this data using a Internet service in ECC 6.0 ??? As this would cut the cost of the Biztalk.
I really appriciate your thoughts on this. We don't have XI either.
Thanks a lot
Van

HI Van Dan Jan,
We have just implemented integarion of SAP with Microsoft stack (Microsoft CRM, Share point and Axapta), But in all integration BizTalk as a middleware used.
There is two way requirements :
1. whenever Most of the control are at the Microsoft level like : Customer creation, Creation of orders, which need to be synchronus activity we have used RFC which internally calls BAPI. (So SAP adapter Configured at BizTalk). and whenever Biztalk receives request file from CRM or share point to there location they call SAP RFC's.
2. When DATA is needed from SAP to microsoft stack like to syncronize the missing transaction like customer pad and all.
Scheduled job at BizTalk end which call SAP to get the DATA via RFC mode :
In SAP we have two things
1. if DATA size is small (below 2 MB) like in last 1 hrs what are the sales contract created in SAP that need to updated in Microsoft other system than Biztalk will trigger a job at 1 hr interval or on deemand to get the detail which directly we pick from data base or using BAPI to get the detail via RFC.
2. If Data Size is large (more than 2 MB) like total transation happened in a day for all customers: then we wriiting the data in OS or application server and that job also get initiated from Biztalk end by sending any parameter to SAP.
advantage of using BizTalk is most of the control you can give it to them so they can run there job on deemand basis.
There is a something known as web service we can use to avoid Interfacing tool, but I dont have much Idea about that,
and please check how many interfacing point is there with SAP in your project, because if Interfacing points are more then I think it is not good to write a web services for so many things.
do let me know if you need further information.

ECC 6.0 integration with MS Dynamics CRM 2011 on-demand thru PI

Hi Gurus,
sorry in advance if some of my doubts will appear to you experts as stupid....
Scenario: we're on the way to realize the integration between SAP ECC and Microsoft Dynamics CRM Online (so...in the cloud) using SAP PI 7.11. In our scenario SAP PI will be the client, consuming webservices provided by MS CRM.
Unfortunately during the PI configuration (following SAP HELP instructions) we're facing the following problems:
1. The system (PI, dual-stack installation) has the parameter 'ssl/pse_provider' set to 'ABAP'. Considering that we would like to use SSL with SOAP adapter, questions are:
- Can we use the ABAP stack to maintain the PSEs, or it's mandatory to do it into the AS Java in order to use SSL with SOAP adapter.
- If so, we need to switch the ssl/pse_provider parameter to JAVA. Could this change create some kind of problems?
For information, currently in transaction STRUST we only have a Local node, neither Server nor Client nodes.
2. We have already installed the SAP Cryptographic Library for SSL but:
- In NWA we can't find ICM_SSL_<instance_ID> view or CLIENT_ICM_SSL_<instance_ID> keystore view into the list of Keystore Views.
- We would like to change the default Profile into RZ10 but we Can't find the profile...
- MS CRM (ws server) give us only a public certificate but do we need a private key too or we have to generate it from SAP?
- We need to know if is possible to use the MS 'LIVEID' authentication with SAP PI or SAP ECC.
- Do we need additional modules for the SOAP adapter(maybe an Axis one in order to use soap protocol 1.2)?
Could you please suggest the right configuration and give us some tips about this kind of integration?
Thanks a lot,
MR

Hi Mauro,
Looking at your background I thought maybe you could help me out wit this integration question.
I'm looking for some feedback on how best to integrate Microsoft Dynamics AX (DAX) with SAP CRM. We have a PI server.
From reading on the net, I see many people are using a middleware product called Scribe or BizzTalk. We already made an investment with SAP PI and we'd like to use it.
Do you have any references for Microsoft DAX integration with SAP CRM via SAP PI/ XI?
Thanks in advance!

Integration with POS to SAP 4.7 / ECC 6.0

Hi Experts,
Is it possible to use POS with SAP 4.7 or ECC 6.0 without using IS Retail. If possible can you please explain how can we do that ?
Thanks
Christine

this is not the forum to post your MM question???!! Post in appropriate forum.
--Ragu

ECC 6.0 Integration with BI,CRM,SRM

Hi All,
What are the perequisites for Integration of ECC 6.0 with JAVA Stack (BI,CRM, SRM).
I suppose we can use PI as a middleware between ECC 6.0 and BI, CRM, SRM, But Please make understand the entire flow how we will achieve this and how it works physicaly.
And, What information ABAP and JAVA stack holds, How we can Install ABAP & JAVA Stack and what purpose it solves.
Please share your valuable inputs with me as I would like to have clear understanding of It.
Thanks in Advance,
VB

Hi Vikas,
Please have a look at http://help.sap.com/saphelp_ep50sp2/helpdata/en/89/6eb8deaf2f11d5993700508b6b8b11/content.htm
Hope it will helps
Regards
Arun

SAP R/3 4.6 C Integration with Active Directory

Dear Friends,
We have a requirement to Integrate Active Directory User Authentication to SAP User authentication. Currently we are using following systems in our organization:
SAP R/3 4.6 C Kernel 46D
SAP ECC 6.0 with EHP4
Currently users are logging into Individual SAP systems with ther own User ID and passwords and they need to remember all the system passwords.
We are not looking for EP for SIngle Sign on.
Do we have any option to Integrate Active Directory User authentication with these 2 SAP systems using SSO method ?
Regards
Graham

Hi Graham,
Depending on the server OS (Linux, Solaris, Windows, etc) and client (web browser, SAP GUI, etc), you can accomplish this several different ways ranging from using features provided by SAP directly ([SAP GUI and Windows to Windows|http://help.sap.com/saphelp_nw70ehp2/helpdata/en/44/0ebf6c9b2b0d1ae10000000a114a6b/frameset.htm] for example) or by [several third party vendors|http://ecohub.sdn.sap.com/irj/ecohub/solutions?query=%22active+directory%22].
Please let us know what OS and clients are you working with and I'm sure we can point you in the right direction.
Thanks!
Kyle

SAP Clustering on HP-UX(SGe integration) with DB2 9.1

Hi
i have install ecc6.0 sr3 on hp ux 11.31 databse db1 9.2
installtion done in unix cluter enviroment
node A = ci installed
NodeB - db installed
after this i have done disturbuted installation for sap .
when i switch node A (ci ) to NODE B (db) system workd fine
but when i swtich NODE B (db ) to NODE A (CI)
nighter my dabatase start nighter sap starts
please help
its seems issue of db post installation steps in cluster enivorment everyhting is installed on SAN

Hi,
Which guide have you followed? Can you please check the below IBM Red Book?
http://www.redbooks.ibm.com/abstracts/sg247363.html
Regards

SAP R/3 4.7 Integration with PCMiler/Rand McNally

Hello All,
Is anyone aware of the SAP R/3 4.7 system integration with PCMiler Global Webservices/PCMiler TCP/IP software to obtain distances in SAP shipments? Also is anyone aware of the integration between SAP R/3 4.7 and Rand McNally Global solution?
Response will be really appreciated.
Regards,
Nikhil Padwal

Mrutyunjay,
Did you check this <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/89/6eb8deaf2f11d5993700508b6b8b11/frameset.htm">link</a> explaining how you can do SSO between R/3 and EP7?
Hope that helps,
Kiran

What SAP-modules can be SAP HR integrated with?

Hi to all!
I have a following question: What SAP-modules can be SAP HR integrated with? What HR objects and business processes could be involved in integration. What are the main advantages of this kind of integration.

The best advantage of SAP HCM is that we have Integration with other Modules
as per as SAP HCM i worked integration with FICO , SD
Business objects form FICO side will be Cost Center
and there are many Advantages with the integrations with other modules

Portal Integration with XI

Hi Guru's,
Could any one tell me two scenarios where we integrate Portals with the XI system.
If Portal is the receiver/sender then what could be the possible sender/receivers respectively.
Please, also let me know what scenarios (IDOC to HTTP etc) is used for ECC and Portal integration with XI.
What are the Adaptors used for Portals.
Thanks in advance. I will assign points.

Hi,
Take a look at this blog,
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1334 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
You can make a webservice ( SOAP ) call from the portals to XI, or a HTTP call for the same.
For integrating XI and ECC , as usual IDOC's , RFC or Proxies can be used. This blog discusses the same,
/people/ravikumar.allampallam/blog/2005/08/14/choose-the-right-adapter-to-integrate-with-sap-systems
Regards,
Bhavesh

CRM 5.0 Integration with Twitter and facebook

HI Experts,
i am working with SAP CRM 5.0 version,
My existing client want to set up SAP CRM with twitter and Facebook specially customor services ,
Does SAP CRM 5.0 has tight integration with twitter and facebook ,
if yes will you please share iinformation in terms of
1)Effort Estimation :manpoer
2)Costing details
Thanking you in advance
Pravin shete

@sherrysarath: Could you share some documents to understand how standards works for this issue? And if there aren't standards requirements, could you share your custom solution.
@pravin wipro : Could you explain what are your requirements?

How is the integration with ECC in SRM 7.0??

Hi,
Working with SRM 5.0 or 5.5 the use of XI for integration with ECC is not mandatory because when we send any document from ECC to SRM like requisitions (to convert them in shopping cards) or when we send any document from SRM to ECC like shopping cards, PO´s, contracts, we only use the RFC´s and the abap programs.
Is the same behavior with SRM 7.0?????
Could the integration from SRM 7 with ECC 6 work with RFC´S without XI or for this vertions is XI mandatory?????
Thanks

SRM70 is closely integrated with XI for transferring docs between ECC and SRM. SAP introduces eSOA tech nology with SRM70 and hence all documents like PR from ECC to SRM, Central Contract from SRM to ECC, PO creation (Classic), etc uses this techn ology.
Thanks,
Jagadish

How to configure SAP ECC DMS content repository with CRM Services Object

hi,
we have SAP Document management system which is currently integrated with SAP R/3 Ecc system .
with ref. to sap standard functionality i am able to upload the document in DMS content repository through SAP R/3 Ecc System as below.
step-1 ,T.code:CV01n
a.     create - DMS Documents
b.     Oupload Scanned documents in DMS system
c.     select content repository
d.     Save Document
now, in same manner i want to store business documents in SAP ECC R/3 DMS content repository using CRM services trnsaction"CRMD_ORDER". kindly guide me suitably.
regards,
sunil

i am explaining your proble
a.    create - DMS Documents
b.     Oupload Scanned documents in DMS system
c.     select content repository
d.     Save Document
after saving open to document in cv02n and track status of doc i.e. AR CR & RE
if RE status is there the it will repositor at server
Regards,
Sanjeev

Brief discussion on SAP XI and its' Integration with SAP MDM.

Hi,
I have never worked on SAP XI.
I am discussing it on brief, please give your valuable replies.
SAP XI consists of System Landascape Directory(SLD).
SLD Consists of Business System and Techinical System.
Technical System contains all information about the software
component. The Business System consists of Inbound and Outbound Business
System which are used as logical names for data transfer.
There is communication Channel for Receiver and Sender Business System and n agreement
is signed between Sender and Receiver.
Outbound Interface defined for Business System Outbound and Techical System associated
with the Business System,
Inbound Interface defined for Business System Inbound and Techical System associated
with the Business System.
In SAP NetWeaver XI Integration Directory, we have defined the Integration Scenarios,
Actions, Interface Objects, Mapping Objects, Adapters Objects.
Mapping Object defines the Structure and Value Mapping.
Adapter Objects defines the Adapter program which implements RFC Adapter, FTP Adapter logic.
FTP Adapter is used for XI-MDM Communication.
RFC Adapter is used for XI-ECC Communication.
Integration Repository: Both Outbound and Inbound Interfaces are Mapped with Value mapping and
Structure Mapping inside Integration Repository.
The File Adapter takes the File from the Outbound port of MDM System
and sends it as IDOC to Receiver Business System.
Value Mapping must be done between Sender and Receiver interfaces.
Value Mapping is done by XSLT or Java based program.
SAP NetWeaver XI Integration Server at runtime:
Message Split, Interface Determination, Receiver Identifaction, Mapping, Techincal Routing
and Call Adapter Proccess are done.
In SAP XI 3.0 and MDM 5.5:
Step 1: Create busines system as service.
Step 2: Create communication channel for each business service. If the system can communicate
through different channels, then create all possible channel types if necessary.
Step 3: Create receiver agreement between the systems.
Step 4: Interface determination:
- Here you see for the first time the software component mentioned;
there are some special requirements regarding this software component in relation to the customizing ID mapping.
- To modify this software component, the customer needs to copy the SAP standard delivered software component
into its own namespace. The customer is able to modify to create archives
for the customized ID mapping.
Receiver determination.
Configure an FTP Server on the MDS.
Create a send folder for outbound messages using outbound port(s) for
remote systems(s).
Create receive folder inbound messages using inbound port(s) for remote systems.
This ia all about concept of SAP XI Infractsture and its' Integration with SAP MDM 5.5.
Regards
Kaushik Banerjee

Hi Kaushik,
You must be aware of File types that MDM Import Manager can Import i.e. we have XML, Excel etc. Now there are two transactions to extract data from R3
1. MDMGX -
         - For lookup table extraction
         - Output in XML format which MDM can import without using XI.
          - FTP can be configured to put the file in the desired folder which will be then picked by Import Server.
2. MDM_CLNT_EXTR -
          - For Main table records.
          - Output is in Idoc format which MDM doesn't understand hence we need XI in between which converts Idoc file received from R3 into XML which can then be imported using Import Manager or Import Server. For this we need to implement XI Scenario that consists of Source System, Receiver System, Type of Data etc.
Just a basic understanding...
Regards,
Jitesh Talreja

Steps: SNC (Supplier Network Collaboration) Integration with ECC through XI

Hi,
Has anyone worked on the SNC(Supplier Network Collaboration) integration with SAP ECC via SAP XI.
Could you pls share any documentation related to this. And also could anybody tell me the setup required to go ahead with the integration.
Thanks,
S

Hi Xavier,
SNC integration with XI has predefined mappings. So ask your basis guys to download the XI content for SNC using with PI. Once they deployed you will have a builtin predefined content in XI. Within the predefined content mostly they all are xsl mappings.
If your requirement is with the standard idocs then you can use them directly. Else if their is customization they you may need to change the mappings according to your requirements.
Also check this help:
http://help.sap.com/esoa_scm_snc2007/helpdata/en/index.htm
Regards,
---Satish

SAP 4.7 / ECC 6.0 integration with POS

Similar Messages

Maybe you are looking for