SAP 4.7 - Enterprise
Which version of J2EE dose it use? 6.20? Dose the 4.7 support 64 bit hardware architecture?
Hello,
look at http://service.sap.com -> "Release Info" -> "Product Availability Matrix". This will give you detailed information's.
Regards
Gregor
Similar Messages
-
HOW TO DEFINE VIRTUAL HOST NAME IN HPIA64 + SAP R/3 ENTERPRISES 4.7
Hi all,
I am trying to install sap r/3 enterprises 4.7 with OS as HP-UX and Database as Oracle in a cluster environment.
In cluster environment sap installation should be done on virtual hostname ( package id ). I'm using the env variable SAPINST_USE_HOSTNAME=<VIRTUAL HOSTNAME>.
My cluster is running and I'm able to ping it from network, but at the time of SAP Installation my sapinst starts with the physical host name not with the virtual host name.
What can be the solution ..?
Thanks,
Chandresh Pranami.Hi Chandresh,
Try executing sapinst with virtual hostname.
eg. ./sapinst SAPINST_USE_HOSTNAME=<VIRTUAL HOSTNAME>.
This should work.
-Pinkle -
Error while upgrading SAP R/3 Enterprise 4.7 to SAP ECC 5.0
Dear SAP,
We are on the process of upgrading SAP R/3 Enterprise 4.7 with Ext:110 to SAP ECC 5.0.But during the VERSCHK_INI phase an error is been thrown showing that
"The start release configuration :
SAP_ABA :620
SAP_APPL :470
SAP_BASIS :620
SAP_HR:470.....is not supported "
At this stage we decided to continue with this by ignoring the VERSCHK_INI phase,but it gave us a warning that to continue with the next phase(TOOLVERSIOn_INI phase) we require a password.
we searched in several documents even in the documents along with the cd but was not able to find a password for this or a solution for the error in phase VERSCHK_INI.
I request team SAP to help us in this regard.Expecting your reply ASAP.
Thanks and Regards
Anantha Raman E.Were you able to find a resolution to this problem. We are also having a similar problem in our prepare phase and cannot find anything to help us as yet.
Thanks,
Barry Keating -
Add sap R/3 enterprise system in solution manager SLD
Dear All
Required solution manager configuration documents.
We have DEV QAS and PRD server on SAP mySAP ERP 4.7 ( SAP R/3 Enterprise )
And during the installation of solution manager I select u201CConfigure a Local SLD u201C
Which steps I follows to connect or configure my sap system with solution manager ( SLD ) then I will configure central monitoring, TMS management, Helpdesk etc
Who to Configure SLD Bridge ( in SLD Server ) ?
in which system Run Transaction RZ70 ( In SAP R/3 Enterprise ) ?
and how to Verify that my system is connected and working fine With SLD
Please help me regarding u201C configuration solution manager u201C
Regards
ShahidHi
Visit for step by step details of Standard Configuration of Basic Settings
http://service.sap.com/rkt-solman-->SAP Solution Manager 7.0->Technology Consultants & System Administrators->Technical Configuration->just drill out there you can find lot of simulator how to install and configure solution manager
http://www.wilsonmar.com/sap_solution_manager.htm
/people/federico.babelis2/blog/2006/04/14/service-desk-configuration-guide-for-dummies
Regards
Uday -
DUMP CRITICAL ERROR - SAP R/3 Enterprise
Hello Guys,
I am with the following error in my environment DEV, with the QAS environments and PRD does not happen the same mistake.
The error occurs when I try to access the table BSEG through transacão SE16. The Dump what happens is:
DBIF_RSQL_INVALID_REQUEST
shot dump DBIF_RSQL_INVALID_REQUEST when acessing in cluster table BSEG
Watching this error in the archives of trace dev_w1, I have the following log of error:
B Mon Aug 11 10:13:06 2008
B dbmyclu : c2_decompress (9.6740) : damaged 0. cluster record (pgs_total 0, bitem_total 0, max_cachecnt 32700)
B ***LOG BZW=> error BITT on compression/decompression using c2_decompr
B **LOG BY0=> myCluster: RFBLG myKey: 11028 37002303432008
B dbmyclu : c3_process_cluster (9.14819): received return code 2 from c2_decompress.
B dbmyclu : c3_fetch_next_pages_on_db (9.12297): received return code 2 from c3_process_cluster/c3_reread_single_cluster_on_db.
B dbmyclu : c3_get_next_multiple_cluster (9.13489): received return code 2 from c3_fetch_next_pages_on_db/c3_get_single_cluster (cid 0, lockstate 0, readmode 1, repeat 0).
B dbmyclu : c3_fetch_cluster_cursor (9.13711): received return code 2 out of getloop (cid 0, lockstate 0, readmode 1, readclu -10490, nextclu 0, clucheck 0).
B dbmyclu : c2_seqcount (9.10006): received return code 2 from c3_fetch_cluster_cursor (cid 0, readclu -10490).
B dbmyclu : c2_count (9.4512): received return code 2 from c2_seqcount (table BSEG , upto 0, mod_cnt 5691071).
B dbmyclu : db_rclu2 (9.2761): received return code 2 from cluster access for fcode 257, table BSEG , cluster RFBLG .
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_VMIT_CLEANUP entered.
A ** RABAX: level LEV_RX_VMIT_CLEANUP completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
M ***LOG R68=> ThIRollBack, roll back ()
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Aug 11 10:13:06 2008
A
A ABAP Program /1BCDWB/DBBSEG .
A Source /1BCDWB/DBBSEG Line 692.
A Error Code DBIF_RSQL_INVALID_REQUEST.
A Module $Id: //bas/640_REL/src/krn/runt/absapsql.c#17 $ SAP.
A Function HandleRsqlErrors Line 779.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_RABAX
A Invalid request. accessed..
Someone could help me with this error?
My environment is as follows:
Product Version SAP R / 3 Enterprise 47X110
AIX Operating System
Database DB2/UDB
kernel release 640 / patch 155
Someone could help me with this error?
Thanksplease check if this OSS .946659
I am also looking for a note as we got the same error message.
See if it helps or let me know your solution if you fix it.
Good luck..
Amit Asthana -
Hi,
We currently have SAP R/3 Enterprise version which is 4.7 installed on Sun OS.
We are thinking of introducing PI 7.1 or 7.3 into the landscape.
Is it possible to integrate PI with SAP 4.7. I know that there would not be a local integration engine which will affect abap proxies.
Is there any other problems associated with it? How about JAVA Webstart
Regards
KrishHi,
>>>>2. What is the minimum web Application Server required for proxies
ABAP proxy objects can only be generated for SAP systems that are based on SAP Web Application Server 6.40.
>>>>3. Can i still go ahead with idocs and rfc's to communicate with
SAP 4.7 and PI 7.1/7.3 or does it require any specific requirements?
Yes you can go ahead
>>>> Does idoc adapter require web 6.20 or more, anything to do with it.
IDocs from SAP systems Release 3.1x or higher are supported.
regards
Ramesh
Edited by: Ramesh P on Dec 7, 2011 5:08 PM -
SAP R/3 ENTERPRISE 4.7 / ORACLE 9i / kernel 640 for AIX 6.1
Hello,
We plan to migrate our SAP systems from AIX 5.3 to AIX 6.1.
We are currently running a SAP R/3 ENTERPRISE 4.7 on ORACLE 9i with a 640 kernel 64 bits UC.
I would like to know if AIX 6.1 is validated for our system (SAP 4.7, ORCALE 9i and kernel 640).
Thanks.I would like to know if AIX 6.1 is validated for our system (SAP 4.7, ORCALE 9i and kernel 640).
Read
Note 1137862 - Using SAP systems with AIX 6.1
Note 1087498 - Support für AIX 6.1
The first note will tell you the necessary TL/SP you need to install. The second note tells you about the minimum kernel version.
What does not work is Oracle 9.2 --> not supported under AIX 6.1 (http://service.sap.com/pam or Oracle Metalink 169706.1).
Since Oracle 9.2 is out of support already I highly suggest upgrading to Oracle 10.2.0.4 and using the latest 640_EX2 kernel.
Markus -
Installation of SAP Netweaver 7.0 with SAP R/3 Enterprise 4.70 backend
Hello everybody,
I need to install an SAP Netweaver 7.0 environment for a client who is currently using SAP R/3 Enterprise 4.70. However, I couldn't find any document about the compatibility of the two.
Does anybody know if it is possible to connect these versions of Netweaver and R/3?
Could you please tell me where I could get some documentation about it (for example : intallation guide of netweaver with SAP R/3 4.7 or docs about netweaver and R/3 4.7 connectivity) ?
Thank you.
StanOK thanks.
The final need is to be able to create purchase requisitions or purchase orders in the enterprise portal with a simplified user interface for users who are not used to working with SAP and don't have the SAP client installed on their computer.
So they will use their web browser to connect to the portal and create the requisition for example. Then we wan't the data to be stored in the R/3 backend et other users will validate the requisition and deal with the rest of the process.
The second step will be to study the benefits we could get from installing Adobe document services and creating an adobe interactive form to simplify even more the user interface. The users would then fill the data for the purchase order or requisition directly in the form that looks like the form they get when printing.
I saw that we have to install the "R/3Plug-In 2004.1" in the backend to use our SAP 4.7 as a data source for the Portal.
Do you know if there are other steps to perform in the backend before we link it to the portal ?
Thank you
Stan -
Ora11 Support for SAP R/3 Enterprise 4.7 x110
Dear Oracle People,
in the "Development Update December 2009" there is a u201CBig picture of supported Oracle releases" on p24.
In this picture it is described that SAP R/3 Enterprise 4.7 x110 will not be supported under Oracle 11.
But SAP R/3 Enterprise 4.7 x200 will be supported.
I do not see a substantial technical difference between these two releases. And i do net see why Extension Set 1.10 does not fulfil the requirements for Oracle 11 as described in upper paper on p12 which seem to be: having a 6.40 kernel and extended maintenance at least until 2010
Can you please explain me why 4.7x110 will not be supported under Oracle 11.
Sincerely
Stefan DietzHello Stefan,
You can crosscheck this with sapnote #1398634
Oracle 11.2 release for older SAP releases
A general release is not provided for earlier SAP releases (SAP R/3 3.1I up to and including SAP R/3 4.6C). Similar to Oracle Version 10.2, there will only be a temporary 11.2 release in direct connection with an SAP upgrade project for these older SAP versions.
Oracle 11.2 for SAP Kernel 6.40, 7.x and higher
Oracle Version 11.2 will be released for these SAP kernel versions. In these kernel versions, basically only those SAP product versions that will still be at least part of SAP Extended Maintenance in 2010 will be released for Oracle 11.2.
[UPDATE]
I have also checked the PAM for SAP R/3 ENTERPRISE 47X110 and the kernel 6.40 is also supported .. really strange
Regards
Stefan -
License Key For SAP R/3 Enterprise Demo Version
Hello Basis Gurus,
I have installed SAP R/3 Enterprise Demo Version in my Notebook.
When i am trying to login using User ID: SAPUSER getting an error message that ":Logon refused (valid license not installed)"
SAP R/3 Details:
Component Version: SAP R/3 Enterprise
Installation Number: INITIAL
License expiration: ..----
Active Hardware Key: C1129820057
System Number: System No. Empty
When i am trying to install the License Key at Command Prompt getting the error message that
Specify your license key:
LICENSE_KEY 1...5....0....5....0...4
LICENSE_KEY =
Wrong license data specified
> Check the specified license data for:
> - typing errors
> - upper / lower characters
> - same values as noted on license fax
How can i get the correct LICENSE_KEY for this demo version for the above hard ware key.
Please advice urgently..to get hardware key:
saplicense -get
to get license key:
https://websmp106.sap-ag.de/licensekeys -
Upgrade CFM from Sap R/3 Enterprise (4.7) Sap to ECC 6.00
Hello,
We are in a project of upgrade Sap from Sap R/3 Enterprise (4.7) to Sap ECC 6.00. Our question is particularly for CFM component migration/upgrade.
As we checked we have activate the extension set:
EA-FIN: Financials Extension
EA-FS: Financial Services
According with the Component Version Data the extension set EA-FINSERV has the release 2.00. However, in order to execute the CFM migration with transaction TPM_MIGRATION we are not sure if our CFM installation is on release 1.00 or 2.00.
In the other OSS note 858966 mentions the following conditions to start points migration:
1. The start release of the upgrade is SAP R/3 Enterprise 4.70 with SAP
R/3 Enterprise extension set 1.10 or earlier.
2. The target release of the upgrade is SAP R/3 Enterprise 4.70 with SAP
R/3 Enterprise extension set 2.00 or higher.
Do you know a transaction o report Sap which provides this information?
Thank in advance.
SergioWithin SAP, select System -> Status... In the pop-up box, click the details button in the SAP System data section and you'll get another pop-up with system component information. It's been a couple of years since I did the Treasury migration for our upgrade from 4.7 to 6.0, but I believe the component you're looking for is EA-FIN. The Release column will have either 110 (for extension set 1.10) or 200 for (2.00).
Regards,
Shannon -
Connection to database in sap crystal reports enterprise xi 4.0
Hi,
When we are trying to connect to database in sap crystal reports enterprise xi 4.0 ,i am geting the below error.please advise.
Error:
Failed to establish a connection.The cause was:
Connot connect to SAP BussinessObjects Enterprise at this time.Please try again later.Thanks for your quick response Henry....
I checked all this things and all are working fine.
Now I am able to connect to BOE server.
The cause behind the issue was in "CMC > Applications > Web
Service > Access URL:" the URL was having different server name which we have changed earliar, I just correct the URL and issue got resolved.
But now when I am trying to access BOE Server through Crystal Reports for Enterprise 4.0 client tool directly not from launch pad, it probes me the same error. (Note: I used the same parameters which i got from launch pad token to this)
Is that a only way to use Crystal Reports for Enterprise 4.0 from launch pad ?? -
SMSY: Product version SAP R/3 ENTERPRISE 47X200 keeps returning
Hi,
Last year we have upgraded our SAP R/3 ENTERPRISE 47X200 system to SAP ERP 6.0.
For downloading enhancement packages we need the product version to be SAP ERP 6.0. In SMSY however, SAP R/3 ENTERPRISE 47X200 is still mentioned in the product versions list. We can delete it manually (not used in any logical component anymore) and are able to download enhancement packages fine at that moment. However, when we refresh SMSY by reading data from the SLD the SAP R/3 ENTERPRISE 47X200 product version returns in the list of product versions and we have to delete it manually again.
Any ideas?
Thanks,
Regards,
Bart Groot.check the Note and one of the same threads
Note 1296512 - SMSY: Product version transferred from deleted system
Configure ECC 6.0 EHP4 in SAP Solution Manager SP15 -
SAP Solution Manager - Enterprise Support Report bw cubes
We are looking at the Infoproviders in Solution Manager BW and noticed the data for SAP Solution Manager - Enterprise Support Report.
When we look at these cubes, we are particularly interested in the Software Component Versions.
Unfortunately, all of these data cubes are empty. Based on some discussions among our colleagues we are wondering if this data is only activated for customers that have the full Enterprise Support agreement in place with SAP?
If that is the case, then so be it (we don't have that level of support). However, if that is not the case, can anyone suggest a way to populate these cubes.
thanks,
Jeff HenkeHi,
Solution Manager is a separate component and needs to be installed separately (not possible to install on top of R/3 Enterprise).
You can order SAP Solution Manager Software from SAP or download from http://service.sap.com/swdc
Solution manager is free from SAP and no additional license involved for it's customer for normal use.
You can get more information on Solution manager from http://service.sap.com/solutionmanager
btw: as far as I know for R/3 Enterprise you can still download patches via http://service.sap.com/swdc without solution manager, For Netweaver 7.0 systems, use of Solution Manager (Maintenance Optimizer) became mandatory.
Cheers !!
Satya.
PS: Pls reward points if the answer was helpful...Thx. -
U0093Engineering Change Managementu0094 in SAP 4.7 Enterprise.
Like to here from experts: What do you think of Engineering Change Management in SAP 4.7 Enterprise.
The scenario is; any Plant Modification dealt under "MANAGEMENT OF CHANGE" which is currently outside of SAP and there is strong business drive to move into SAP.
<i>It is the policy that all permanent, temporary, and emergency changes to the plant equipment and facilities, processing systems, operation procedures, site standards, chemicals & raw-materials, engineering/safety controls, must be evaluated, authorized, implemented and documented.
</i>
While searching the possible solution came across ECM "Engineering Change Management" would like to know can we use ECM for this purpose?
Note: Also please furnish me with related documentation and/or demo.
Thanks in Advance.
Best Regards,<a href="http://help.sap.com/saphelp_470/helpdata/en/d8/7329d14b7511d1894b0000e8323c4f/frameset.htm">http://help.sap.com/saphelp_470/helpdata/en/d8/7329d14b7511d1894b0000e8323c4f/frameset.htm</a>
-
SAP R/3 ENTERPRISE 47X200 IDES Version - Download Titles
Hi
Could any one please list out all required Download Titles for SAP R/3 ENTERPRISE 47X200 IDES Version.
Operating System : Microsoft Windows Server 2003 Enterprise Edition with SP1
RDBMS : Oracle 9.0
Will appreciate install instructions as well . (e-mail : [email protected])
Thanks in Advance
Veeresh Babucds you'll need...
- Oracle 9.2 NT 1/3 - Oracle 9.2 NT 3/3 (or appropriate DVDs)
- Oracle 9.2 Patch Set 7 WIN I386 32Bit/64bit
- DVD IDES SAP R3E 4.7x2.00 SR1 Export (4) 1 of 16 - 16 of 16
- Installation Master 6.20/6.40 Windows Server on IA32 32bit/64bit
- CD 6.40 Kernel ORACLE A,L,NT,NT/IA64
- SAP NW04 SR1 IGS
use the master cd/dvd to invoke <b>sapinst</b> and follow the instructions (plz check on any new cds as 47x200SR1 runs on kernel 6.40 there might be newer instructions found in sapnet!); oracle must be installed before starting sapinst...after that install the central instance followed by the database instance installation. the ides installation differs only slightly from a "normal" installation...just use the appropriate ides export cd/dvd...
plz read the installation guide and the relevant sapnotes carefully!!!
GreetZ, AH
Maybe you are looking for
-
Installing an application (adium x 0.89/msn) + connecting through proxy
hi all. most .dmg files will mount and tell u to drag the .app icon into 'applications folder' may i ask, what is the difference if u drag it into MACINTOSH HDD->APPLICATIONS folder, vs dragging it into /user/applications. apparently it had an observ
-
Dear All, we have export sale to abroad by using letter of credit. How to apply this method of export sale in B1 ? Pls give advice. TIA Rajh
-
Hi, i have two tables: pet_owner and pet...trying to make a pet registration form....owner might have more than one pet. ho do i create a form with the owner's details at the top, then a drop down, how many pet would you like to register? [1][2][3] a
-
Hi, Where we configure the SMTP Gateway address for external mailing? Best regards Zied
-
I just bought my Macbook Pro, the screen suddenly goes grey and there is a message in the middle in a black box that says "You need to restart your computer. Hold down the power button until it turns off, then press the power button again.". it happe