SAP 7.10. GUI Deployment

Hi gurus,
In need of some help deploying SAP 7.10 GUI. I am using an Instillation Server and although I setup the credentials for DS and IS services as global admin, I am still unable to get the instillation to work on the local workstation (permission denied administrator permission needed).
Can you please advise me as to what I am doing wrong here?
Thanks in advance.
Regards,
Iqbal

Hi Iqbal,
please check if you have you correctly configured local security handling.
"Local Security Handling when configured successfully allows users on the network to deploy SAP Front-End Components on their Workstation using NetWeaver SAPSetup without requiring administrative privileges on their Workstation."
so if you don't have administrative authorization on the local station, or trying to install from an account without admin auth, it might give you this error.
Regards,
Debasis.

Similar Messages

  • Icons grayed out in SAP R/3 GUI iview

    The problem is when some people run the SAP R/3 GUI iview from EP5 and EP6,
    some of the icons are grayed out, such as the "create new session" icon,
    although you can create a new session from the system menu.  When I run the
    iview, I see all icons as active, none are grayed out.  Why the difference
    and what can I change so that all icons are active (not grayed out)for all people?

    Hi,
    I too have the same issue even with EP 7.0. Is there any solution or patch available for this issue?
    Thanks in advance.

  • Does SAP has a GUI screen painter or not? If yes what operating systems is

    Does SAP has a GUI screen painter or not? If yes what operating systems is  it available on? What is the other type of screen painter called?

    SE51 is the transaction code for the screen painter.
    Check this link for <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/d1/801b50454211d189710000e8322d00/frameset.htm">Screen Painter</a>
    Regards
    - Gopi

  • SAP Netweaver 04 SP16 deployed with Xalan 2.60 or Xalan 2.70

    SAP Netweaver 04 SP16 deployed with Xalan 2.60 or Xalan 2.70
    Have you tried to port and run (Sneak Preview)  SAPNetWeaver java 04 SP16 or 04S SP7 with a later version on Xalan version 2.60 or Xalan version 2.70 along with jdk 1.4.2_(8 or greater)?
    What specifically is failing? What patches or work around have you used to overcome compatibility issues with Xalan?
    When we run Sneak Preview SAPNetWeaver java 04 SP16 SP7 with a version on Xalan version 2.60 or Xalan version 2.70 along with jdk 1.4.2_11, We get error 503 Service Unavailable, Application cannot be started
    Details: com.sap.engine.services.deploy.container.ExceptionInfo: Error while parsing file “data-source-aliases.xml”.

    Hi
    SAP does not allow usage of any other XML parsers with SAP web AS.
    please have a look at this link
    http://help.sap.com/saphelp_nw04/helpdata/en/36/ef353e39011a38e10000000a114084/frameset.htm
    "Setting system properties in a system that supports more than one parser is prohibited".
    The Error which you are getting is because one of the
    java.system properties for parsing is
    getting changed by xalan. These system properties are explictly set by the SAP XML implementation which it does not allow you to change.
    Also can you please let me know where are you placing the xalan jar file ? is it deployed as a j2ee library or part of war ?
    Hope this helps. please mark points for helpful answers
    regards
    rajesh kr

  • BW Analyzer 3.x issue with SAP 7.1 Gui

    BW Analyzer 3.x issue with SAP 7.1 Gui
    After executing a BW worksheet and then "Selecting Filter Value" on a free Characteristic, The "Select Filter Value" Window pops up, but when you add or remove a characteristic it pops back to its original position.  If you try a second time, the characteristic will stay, but when you click "OK" to re-execute the report the "Select Filter Value"Window does not close.
    When you try to close the "Select  Filter Value" Window, Excel error out and shuts down

    Have you looked at OSS Notes.  This may just be a 3.5 Analyzer ith a BI 70 server issue, or did this only begin to happen with a upgrade to e 7.10 gui?
    The whole area of filters and variables with 3.5 Analyzer with BI 7.0 server has been shaky, so I'd look for Notes before I go down any reinstallion path.

  • Getting error while try to open SAP system from GUI

    Hi All,
    When I try to open any SAP system from GUI I am getting below dump error message. Please suggest on this.
    Thanks  & Regards
    Surender

    Hi Surender,
    Is it a general user issue or are you the only user facing that issue ? Does the error occur right after you enter user/password ?
    From the GUI session status bar, I see " Memory Low. leave the transaction before taking a break".
    This looks like a improper memory configured system. I would suggest that you review your memory parameters as per the SAP note 146289.
    If you already have the memory parameters set to at least the values suggested by that note, please further increase the parameters below:
        abap/heap_area_total
        abap/heap_area_dia
    Hope that helps.
    Kind regards,
    Eric

  • SAP SSO between Microsoft AD and SAP R/3 GUI&WebGui

    Hello Everybody,
    We are looking in to implementing SSO between Mircosoft AD and our SAP CRM ABAP 7.0.
    We have users both logging in through SAP Gui and also the web gui.
    Found there a multiple options for achieving SSO:
    1) SNC
    2) X.509 cerfificate
    3) Kerberos
    I would like to go with X.509 certificate , and have already implemented the SAPCRYPTOLIB 5.5.5. Now am trying to download the "SAP NW Single Sign on 2.0" for installing the Secure Login Library SSL. And when i looked at PAM the required product versions are only:
    1. SAP EHP1 for SAP NW 7.3
    2. SAP NW 7.3
    3. SAP NW 7.4
    4. SAP NW CE 7.2
    So I went back and looked at PAM for SAP NW SINGLE SIGN ON 1.0 required product versions and I only see the below:
    1. SAP EHP1 FOR SAP NETWEAVER 7.3
    2. SAP NETWEAVER 7.3
    3. SAP NETWEAVER CE 7.2
    Our version of SAP is CRM ABAP 7.0, so I am not sure how/which version of Single Sign on I have to use.
    Can someone please advise.
    Thanks!

    Thank you Donka for the information!
    Looks like NW SSO 2.0 is supported for AIX 7.1 SAP ABAP CRM 7.0.
    But we also have users logging in to ABAP CRM 7.0 via HTTP Web dispatcher.
    And the PAM does not mention if NWSSO 2.0 is supported for X.509 method for web gui users logging in via HTTP.
    Also if we decide to go with SSO 2.0 and I manually Install the COMMONCRYPTOLIB 8 instead of the SAPCRYPTOLIB 5.5.5, I should be able to use the Secure Login Library files that come with the SSO 2.0 right?
    Here's our current Kernel version:
    kernel make variant           720_REL, 64 BIT AIX, UNICODE , Patch number 500
    Thanks!

  • Sap-plugin error when deploying a par file

    Hi,
    We are getting sap-plugin error when ever we are trying to deploy the application to the portal.Even after restarting the server the problem is not getting solved.
    The application we are trying to deploy is perfectly alright as we tested the same earlier.
    Can any one provide some inputs to solve this issue.
    To add some more points
    In brief ,we are not able to deploy our Portal applications . It is giving us error like this
    NFO: Detected Portal Archive File: com.abc.par
    INFO: Deployment failed - exception caught: Application upload failed: com.abc.par - more detail at: /usr/sap/POD/JC30/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/deployment/pcd/com.abc.par.log…
    We got this error many times , but after some time , when we restart the portal it works,
    this time it is not working even after I restarted the server many times

    hi all, i have same problem with upload of .par file, it doesn't work both from the portal and from the NWDS,
    here i post first part of log file:
    this is   sap-plugin.log :
    [16.05.07 / 13:05] #ERROR LEVEL# com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1 > Upload Response: <?xml version="1.0" encoding="utf-8"?>
    <query-result><info><type>1</type><message>Detected Portal Archive File: test.par</message></info><info><type>1</type><message>Deployment failed - exception caught: Application upload failed: test.par - more detail at: C:\usr\sap\SWB\DVEBMGS02\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd\test.par.log</message></info></query-result>
    this is  test.par.log :
    2007-05-16_12-03-10
    Application upload failed: test.par
    com.sapportals.portal.prt.runtime.PortalException: [ApplicationRepositoryService.putArchive] archive: test.par
         at com.sapportals.portal.application.applicationrepository.ApplicationRepositoryService.putArchive(ApplicationRepositoryService.java:328)
         at com.sapportals.portal.prt.deployment.DeploymentManager._uploadArchive(DeploymentManager.java:813)
         at com.sapportals.portal.prt.deployment.DeploymentManager.uploadArchive(DeploymentManager.java:474)
         at com.sapportals.portal.prt.deployment.DeploymentManager.uploadApplication(DeploymentManager.java:319)
         at com.sap.ip.portal.admin.portalanywhere.ArchiveUploader.doUpload(ArchiveUploader.java:116)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.handleRequestEvent(AbstractPortalComponent.java:700)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:412)
         at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
         at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:369)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:707)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:232)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sapportals.portal.pcd.pl.PlRuntimeException: unexpected SQLException
    Cannot assign a zero-length byte array to host variable 18.
         at com.sapportals.portal.pcd.pl.PlFactory.handleUnexpectedSQLError(PlFactory.java:2490)
         at com.sapportals.portal.pcd.pl.PlContext.createSubcontext(PlContext.java:652)
         at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChildOnPersistence(XfsContext.java:1360)
         at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChildAndNotify(XfsContext.java:1118)
         at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChild(XfsContext.java:1076)
         at com.sapportals.portal.pcd.gl.xfs.XfsContext.createSubcontext(XfsContext.java:846)
         at com.sapportals.portal.pcd.gl.xfs.BasicContext.createBasicSubcontext(BasicContext.java:185)
         at com.sapportals.portal.pcd.gl.PcdPersContext.createSubcontext(PcdPersContext.java:188)
         at com.sapportals.portal.pcd.gl.PcdFilterContext.filterCreateSubcontext(PcdFilterContext.java:244)
         at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:133)
         at com.sapportals.portal.pcd.gl.PcdGlContext.createSubcontext(PcdGlContext.java:500)
         at com.sapportals.portal.pcd.gl.PcdGlContext.bind(PcdGlContext.java:425)
         at com.sapportals.portal.pcd.gl.PcdProxyContext.bind(PcdProxyContext.java:426)
         at com.sapportals.portal.pcd.gl.PcdProxyContext.rebindInt(PcdProxyContext.java:446)
         at com.sapportals.portal.pcd.gl.PcdProxyContext.rebind(PcdProxyContext.java:460)
         at com.sapportals.portal.pcd.gl.PcdGlContext.rebind(PcdGlContext.java:1317)
         at com.sapportals.portal.pcd.gl.PcdProxyContext.rebind(PcdProxyContext.java:501)
         at com.sapportals.portal.pcd.gl.PcdProxyContext.rebind(PcdProxyContext.java:663)
         at com.sapportals.portal.pcd.gl.PcdProxyContext.rebind(PcdProxyContext.java:668)
         at com.sapportals.portal.application.applicationrepository.ApplicationRepositoryService.updateObject(ApplicationRepositoryService.java:717)
         at com.sapportals.portal.application.applicationrepository.ApplicationRepositoryService.storeApplication(ApplicationRepositoryService.java:389)
         at com.sapportals.portal.application.applicationrepository.ApplicationRepositoryService.putArchive(ApplicationRepositoryService.java:306)
         ... 34 more
    Caused by: com.sap.sql.log.OpenSQLException: Cannot assign a zero-length byte array to host variable 18.
         at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
         at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
         at com.sap.sql.jdbc.common.dispatch.BlobHostVariable.setBinaryStream(BlobHostVariable.java:143)
         at com.sap.sql.jdbc.common.CommonPreparedStatement.setBinaryStream(CommonPreparedStatement.java:776)
         at com.sap.engine.services.dbpool.wrappers.PreparedStatementWrapper.setBinaryStream(PreparedStatementWrapper.java:401)
         at com.sapportals.portal.pcd.pl.AttributeHeadersTable.storeAttribute(AttributeHeadersTable.java:431)
         at com.sapportals.portal.pcd.pl.AttributeHeadersTable.insert(AttributeHeadersTable.java:248)
         at com.sapportals.portal.pcd.pl.PlObject.save(PlObject.java:541)
         at com.sapportals.portal.pcd.pl.PlContext.createSubcontext(PlContext.java:616)
         at com.sapportals.portal.pcd.pl.PlContext.createSubcontext(PlContext.java:640)
         ... 54 more

  • SAP ME5.2 SDK deployment issue

    Hi,
    We installed the SAP ME5.2 SDK, and we also tried to develop our new functionality into the SDK, and build this new functionality with Development tool, and generated the SAPME.sca, then we tried to deploy this SAPME.sca into NetWeaver with JSPM, there is no error displayed during deploying. But after deployed, we opened the SAP ME and it returned the error message, I used the manufacturing-admin tool to generate the defaultTrace, it showed the error message like bellow:
    java.util.MissingResourceException: Can't find bundle for base name SAPMELicense, locale en_US
    I am not whant the issue is and what step I missed, it looks the development tool also involve the SAPMELlicense to generate the new SAPME.sca, can anyone have the experience?
    Thanks a lot and best regards,
    Leon Lu

    Hi Leon,
    In the SDK installation guide there is a section 3.2.2 Configure the Java AS Instance that describes how to install SAP ME License on the SDK NW Server. Please follow the steps and the problem should be fixed.
    Good luck
    Ivan

  • Do we need to maintain end users in Gateway system when SAP UI5 Application is deployed on Gateway?

    Hi All,
    We are developing a SAP UI5 application and we deploy our components in Gateway System as BSP application.
    The question now is:::
    We have 3 screens.We need to use our application by share point portal.
    we will be giving the respective URL's (i.e index.html) to portal team and they will be integrating it through URL iViews
    At a glance users can only see a single screen once they login to application. through portal
    This will be taken care by Portal Team.
    Do we need to maintain the end users on Gateway system  for accessing the application?
    We have SSO feature.
    Could you please let me know the possible ways?
    Thanks in Advance
    Regards,
    Satya

    Although I will not advise it, you can turn off authentication in SICF. Go to the service node for you application, and "hardcode" a service user.
    Please check if this is compatible with your license agreement, because I seriously doubt it.

  • SAP ME SDK - WebServices Deployment to a Production Environment

    Hello all,
    I was wondering if anyone else out there was having the same problems that I was having while developing a Web Service through the SDK Eclipse environment?
    I followed the tutorials within the "SDK Training.pdf";; that came with taking the SDK class and was able to create the Web Service (page 264) without any problems on my development server. Deployed through the Eclipse environment. However when performing an actual build to be deployed on a Production server the Web Services were not carried over cleanly.
    I did manage to get it all working after a lot of trial and error as well as creating a new directory structure to place the wsdl files in, which ironically is the same directory structure on the development server (a good thing that I have a D: on both the dev and prod server). Not a very pretty situation. It should come all nice and neat for a production build similar to deploying the SAPME.sca file.
    I was just wondering if anyone else in the community had the same problems that I did?
    Also, was wondering if there was any future enhancements to the SDK to make this process more streamlined?
    Thanks,
    Mike

    Hi Troy,
    I have already done exactly as you suggested, which is also documented in the training information for a production build. I am able to get all of my custom code/activities/jsp pages working within ME without any issues. However, I was not able to get to my web services through the JSP pages that I wrote. Following the example in the Training Documentation given to us from the SAP Trainer.
    To get this to work I had to take the <vendor>Web.sda.ear file and move that to my Production server to install and run. That is the part that I was dicussing it not being a clean install.
    I will take another look at the SDK Implementation Guide, however the Training Doc has examples, which many people, including myself learn best from.
    My question was really has anyone else in the community run into this same issue? As well as, are there any improvements?
    You have answered the second question with regards to ME 6.1. I appreciate and thank you for that.
    I am looking forward to the ME 6.1 ramp up and release.
    Thanks,
    Mike

  • Archiving a file from a PC to SAP without the GUI

    Hi,
    I am looking for a way to send a file from a local pc to SAP Content Server 6.40 (archive link or Kpro).
    We already tried to use a bapi (BDS_BUSINESSDOCUMENT_CREATEF) that is linked to GOS  but it failed. This bapi is cheking if the GUI is open. Since all the process should be done in the background, it fails.
    We are actually using VBA in excell to call RFC/Bapi to try to do this.
    Anybody has an idea on how to do this ???
    many thanks in advance,
    nicolas

    Hi Samir
    You can try running the program  RC1TCG3Z
    SAP CG3Z
    SAP TCODE Description: Upload file
    SAP Program/Report Executed for T-Code: RC1TCG3Z
    CG3Y : Download appl. to frontend
    Source file on application server Path of the file on the applicationserver
    Target file on front end Path of the file on the frontend server (PC)
    Transfer format for data Download the file as text (ASC) or in a binaryformat (BIN)
    Overwrite file Overwrite the target file if it already exist (withoutprompting)
    To start the download: <SHIFT-F1> (left button)
    To cancel: <F12> (right button, red X)
    CG3Z : Upload from frontend to appl.
    Source file on front end Path of the file on the frontend server (PC)
    Target file on application server Path of the file on the applicationserver
    Transfer format for data Download the file as text (ASC) or in a binaryformat (BIN)
    Overwrite file Overwrite the target file if it already exist (withoutprompting)
    To start the upload: <SHIFT-F2> (left button)
    To cancel: <F12> (right button, red X)
    Regards
    dEE

  • Precalculation SAP Server Capacity before deploy Roll Out Project

    Hello Experts,
    Kindly any one share your great experience to help our requirement.
    We are planning to implement new business scenarios and new client in existing Production server.
    Before deploy new business functionalists, what are factors need to consider in existing Production server.
    How to precalculate SAP server capacity to adopt new functionality, how affect workload, performance, memory..etc..
    Kindly any one the list of factors.. and some standard document.
    Regards,
    Karthik

    Hi Karthik,
    First find out the 'capacity' of your current server hardware. Ask the HW provider for the SAPS number of the machines, or look it up on SAP's benchmark sides http://service.sap.com/benchmarks
    Then monitor the current usage of your servers to find out how many SAPS you need for the existing functions, and how much headroom you have left.
    And for the new functions, look whether some sizing guideline exists (http://service.sap.com/sizing) or if a sizing for the new application is implemented in the quicksizer tool.
    With that, it should be a simple a + b = c type calculation.
    Best Regards, Randolf

  • SAP Portal Application development & Deployment

    Hi Guys,
    I'm trying to find a way to customise the top navigation on the Portal (e.g. mahe a hover menu navigation).
    The way to do it is to develop a new portal application using NWDS.
    I'm struggling to follow any of the samples as they all refer to .PAR files, which is not supported anymore by NWDS 7.1.
    What is the right way (and steps) to deploy the SAP Portal application from NWDS to our SAP Portal.
    Thank you.

    Hi Pashaking
    Please check below docs might help
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6066b302-09c8-2a10-a894-eb9fef30df85?QuickLink=index&overridelayout=true
    Tag  Libraries: Creating a Hover Menu in SAP NetWeaver Portal
    Hope it will helps
    Regards
    Arun Jaiswal

  • Trouble with SAP system installation GUI

    Hello all,
    I've installed SLES10 SP2 X86_64 without any problem. During the installation I marked "SAP desired" option to get SAPINIT package installed.
    After initial settings of environment variables and all the stuff, I ran the SAP installation via ./sapinst command (as root). The system displayed proper notice:
    guiengine: No GUI server connected; waiting for a connection on host server, port 21200 to continue with the installation
    but instead of displaying of SAPGUIInstallation on my local PC nothing happend. I use Putty with X11 forwarding option and Xming. Normally this works fine, but not now. I tried the XCLOCK - this works ok.
    So I ran the ./sapinst in X11 directly on the server in ptty7. The SAPGUIInstallation came up. So I shut it down and kept trying to start the installation remotely. After 2hours I came back to X11 to check the SAPGUIInstalltion is still working .. and guess what - even there the GUI haven't been starting since.
    Do you have any idea, what should be wrong or where should I look ?
    Thank you in advance for ANY hint.
    Rgds
    Tomas

    Hello Hannes,
    here are answers for you points:
    - java-1_4_2-ibm-1.4.2_sr11
    - sapinst (of SAP SolMan) from SAP Package official delivery (with SAP NetWeaver04S SP3)
    There is one more note to be mentioned:
    the true is, that when I try to run ./startInstGui.sh (from the same directory as sapinst binary - it comes togethere on Installation Master DVD) .. I get following error:
    Java Runtime found in SAPINST_JRE_HOME environment variable
    Path: /usr/lib64/jvm/jre/bin/java
    Start mode: gui (GUI only)
    Connection parameters:
    GUIServer host: localhost
    GUIServer port: 21212
    Starting...
    <<< frog.jar: version 5.4.5 10/19/05 sap.theme: null >>>
    Warning: Cannot convert string "--lucida-medium-r--------*-iso8859-1" to type FontStruct
    java.lang.reflect.InvocationTargetException
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Nativ e Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Native MethodAccessorImpl.java:85)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Native MethodAccessorImpl.java:58)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(De legatingMethodAccessorImpl.java:60)
    at java.lang.reflect.Method.invoke(Method.java:391)
    at com.sap.sdt.util.misc.MethodCall.invoke(MethodCall .java:82)
    at com.sap.sdt.util.misc.BootStrapper.start(BootStrap per.java:107)
    at SDTGui.main(SDTGui.java:46)
    Caused by: java.lang.InternalError: java/langNullPointerException
    So if the "startInstGui.sh" is run on the background after the GUIserver initialization (previous post), it also probably dumps. I just can not find the log about that.
    I guess I should solve this exception first .. only thing is I dont know how
    Any ideas ?
    Thank you !
    Tomas

Maybe you are looking for