SAP 700 Kernel compability with 640 Release

Hello Gurus,
We have our SAP system with 640 Release and due to some reason we want to upgrade our kernel to 700.
Is this possible to upgrade only SAP kernel to 700 without upgrading the SAP Release?
Thanks in advance..
Manoj

We have our SAP system with 640 Release and due to some reason we want to upgrade our kernel to 700
What would that reason be?... Theres a 640_EXT extended kernel that may cover that (if you tell us what it is?)
Is this possible to upgrade only SAP kernel to 700 without upgrading the SAP Release?
If you are using Release 640 you must likely are running a 4.7 system.... You can't run a 700 kernel in a 4.X system you'll need to upgrade first.
Regards
Juan

Similar Messages

Help needed applying OSS note 981295 in SAP ECC 5.0 with SAP Kernel 640_REL

Hi Experts,
Our functional team is trying to implement a kind of workflow through a notification via SAP Inbox (transaction code SBWP) after the release of a Purchase Order (Transaction code ME29), this is every time when a purchase order is released through transaction code ME29, a notification will be sent to the SAP Inbox (transaction code SBWP). So according to this they told me to implement OSS note 981295, but using transaction SNOTE I get the message that this note can't be implemented in my system this because my SAP Kernel version is the release 6.40 and the needed SAP Kernel for this note is from version 7.00 to version 7.10. So what do you recommend please in this case in order to implement the required functionality on our SAP ECC 5.0 System?
Best Regards,
Erik Espinosa

Note clearly states
This note is only relevant if the following Support Package is installed in the system:
NW04s: Support Package SAPKB70008
Meaning is not relevat to your case. You need to keep looking... if you open an OSS message people from SAP might put you in the right direction.
Regards
Juan

SAP Solution Manager SR1 with MSSQL on W2K3 IA32 - Problem with Kernel

Hello,
we are implementing a sandbox in order to test the SAP Solution Manager 4.0 SR1 with MSSQL on W2K3 IA32. Therefore we ordered the installation CD for the above mentioned configuration. Instead of getting the SAP NETWEAVER Kernel SR1 we got SR2. Now we have the problem, that the installation program SAPINST is requesting the SR1- Kernel.
Unforunately the SR1-Kernel seems no longer available in the download section.
It would be fine to get a suggestion how to solve the problem.
Thanks
Best regards
Ralf Richter ([email protected])

Hi Andreas,
thanks for the hint, I have already checked the LABEL.ASC. I have no LABEL.ASC-Key for the SAP Netweaver 2004s SR1, so it would be a possibilty to substitue this key. But neverhteless, I think, there should be another official procedure in order to use the SR2 instead of the old SR1. I have contacted Klaus Billing at SAP as recommended in the OSS Note 918078. Best regards. Ralf R.

SAP SCM 5.10 with F&R - Update SAP Netweaver 7.0 to 7.0 EHP2 (702)

Hello Experts,
almost all of our SAP-System has now SAP Netweaver 7.0 EHP2 (702) Abap-Stack.
The last system that we will update is a "SAP SCM 5.10" with the F&R component. The mean software level is:
SAP Basis               700 SP23
SCM SCEMSRV      5.1 SP16
SCM                        5.1 SP15
FRP-Kernel                   SP15
To update the SAP-Neatweaver componet to EHP2 have we do an upgrade for the SCM-Server or the SCM itself and what will be now the target relase?
In the documentation is this not realy clear for us.
Kind regards
Thomas

Hi Thomas,
finally for NW 7.0 EHP2 you need to upgrade F&R to F&R 5.1 on SCM 7.0 EHP1.
For details, have a look to the SAP Installation and Upgrade information.
Path: SAP Service Marketplace on http://service.sap.com/ --> SAP Support Portal --> Software Download Center --> Software Downloads --> Software Download Center --> 2nd item: Installation & Upgrades --> A - Z Index --> select letter 'F' --> SAP F&R (option: SAP Forecasting & Replenishment for Retail (for use with SAP merchandising software))
Options; SCM release + EHP; NW release + EHP
F&R 5.1;SCM 2007 (= SCM5.1); NW 7.0
F&R 5.1 on SCM 7.0; SCM 7.0; NW 7.0 EHP1 or NW 7.3
F&R 5.1 on SCM 7.0; SCM 7.0 EHP1; NW 7.0 EHP2
Kind regards,
Rainer
Edited by: Rainer Koehler on Jan 23, 2012 4:13 PM

Install SAP ERP 6.0 with EHP7 - Inst Master ???

Hi All,
I've downloaded all necessary files need for EHP7 FOR SAP ERP 6.0 IDES Version.
The downloaded files are listed below.
NW 7.0 Presentation - 7.30 Compilation 3
NW 7.0 Presentation - Adobe LiveCycle Designer 9.0
RDBMS MSSQLSRV 2012 SP01 CU7 1/8
RDBMS MSSQLSRV 2012 SP01 CU7 2/8
RDBMS MSSQLSRV 2012 SP01 CU7 3/8
RDBMS MSSQLSRV 2012 SP01 CU7 4/8
RDBMS MSSQLSRV 2012 SP01 CU7 5/8
RDBMS MSSQLSRV 2012 SP01 CU7 6/8
RDBMS MSSQLSRV 2012 SP01 CU7 7/8
RDBMS MSSQLSRV 2012 SP01 CU7 8/8
SAP Kernel 7.41 Windows Server on x64 64bit
IDES SAP ERP 6.0 EHP7 Inst. Export 1/14
IDES SAP ERP 6.0 EHP7 Inst. Export 2/14
IDES SAP ERP 6.0 EHP7 Inst. Export 3/14
IDES SAP ERP 6.0 EHP7 Inst. Export 4/14
IDES SAP ERP 6.0 EHP7 Inst. Export 5/14
IDES SAP ERP 6.0 EHP7 Inst. Export 6/14
IDES SAP ERP 6.0 EHP7 Inst. Export 7/14
IDES SAP ERP 6.0 EHP7 Inst. Export 8/14
IDES SAP ERP 6.0 EHP7 Inst. Export 9/14
IDES SAP ERP 6.0 EHP7 Inst. Export 10/14
IDES SAP ERP 6.0 EHP7 Inst. Export 11/14
IDES SAP ERP 6.0 EHP7 Inst. Export 12/14
IDES SAP ERP 6.0 EHP7 Inst. Export 13/14
IDES SAP ERP 6.0 EHP7 Inst. Export 14/14
I don't find Inst.Master which is required to start up the installation. Where to download it and what specific version I need to download for EHP7 for SAP ERP 6.0 IDES ?
Are there any JAVA COMPONENTS that I need to download before starting installation like Java Component BS2005SR3 or Java Component NW 7.0 SR3 ?? and SAP ERP 6.0 SR3 Components for EHP3 do we have similar components for EHP7 ?
Can anyone tell me what type of collation I need to select when installing the MSSQL Server 2012 and which Operating system is best suitable for SAP IDES 6.0 with EHP7 on MSSQL Server 2012 ?
I have JAVA from Oracle version 1.4.2 and policy file or whcih version of JAVA is suitable for installation ? Is it possible to do the install with latest JRE available ?
Will appreciate rewards for best support.
Regards,
Gowri Shankar

Hi Tomas,
Good day, as per you advice. I manage to go thru the IDES installation but its stuck on 19 of 34 (Import ABAP) with error code 2.
Below are the text written in ECC Message Box.
An error occurred while processing option SAP Business Suite 7i 2013 Support Release 1 > EHP7 for SAP ERP 6.0 ABAP Support Release 1 > Oracle > SAP Systems > Application Server ABAP > Standard System > Standard System( Last error reported by the step: Process call 'D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.). You can now:
Choose Retry
to repeat the current step.
Choose Log Files
to get more information about the error.
Stop the option and continue later.
Log files are written to C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP.
Below are the logs from R3load.exe:-
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20141006062234
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/741_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: version R7.40/V1.8 [UNICODE]
Compiled Nov 23 2013 13:31:32
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.009) Support for SUM/ZDM and DMO (note 1778564)
DBSL patchinfo (patches.h): (0.011) DBSL error corrections in 7.41: (4) LOBs (note 1928526)
--------------------- End of patch information -------------------------
process id 4612
DbSl Trace: Connect via SAPUSER not supported for kernel >= 740.
(DB) ERROR: db_connect rc = 256
DbSl Trace: Connect via SAPUSER not supported for kernel >= 740.
(DB) ERROR: DbSlErrorMsg rc = 29
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20141006062234
I've created new thread for this issue at Error in SAP installation in phase 19 of 34 - Import ABAP
Looking forward for your reply.
Regards,
Jay
-96-
Message was edited by: Jay Jay

ECC6.0 upgrade issue with IDoc release

Hi experts,
we are in the process of upgrading our ECC environment from 5.0 to 6.0. We have quite a few interfaces which use ORDERS/Invoice Idocs in customised form. In ECC5.0 environment, we had developed a Z segment in the ORDERS Idoc and the segment release was set as 640. Everything worked fine in ECC5.0.
In upgraded environment, SAP has released new version of some segments. one of those is E1EDP01. This segment has 2 new versions in ECC6.0 environment - 007 and 008. This change in the version changes the data in the IDoc and hence interface goes in error at the EDI provider.
We have tried to use 640 as the IDoc segment release in the partner profile of the IDocs. This still gives us an issue because the 007 version of the segment E1EDP01 has release 620 and hence the Idoc picks up 007 version instead of 006 version as desired. When we change the partner profile with Segment release in the IDoc type as 46C, it gives us an issue in the Z segment saying that the IDoc segment is not released in 46C and the Idoc goes in error.
has any one faces such situation in the past? if yes, please throw some light.
Thanks in advance.

Hello,
Iam new to SAP. Thars why i cant understand well to do upgrade,
Then i found out some notes from internet about Upgrade : SAP Note Number 857904 (upgrade from Release 6. To 7.0).
In that notes,
Actually i would like to know about some key words (for example : ASSIGNING, REPLACE, TRANSFER. ) which how to work in the Release 7.0
Always i have some objets in 4.6C.
Ex 01: READ DATASET p_dataset INTO wa_record
Ex 02 : TRANSFER i_crhu TO p_crhd
LOOP AT i_crhd.
*disable controls in crhd
    PERFORM f_disable_crhd.
    TRANSFER i_crhd TO p_crhd.
    IF sy-subrc NE 0.
      MESSAGE a045.        "Error when transfering data to error file
    ENDIF.
ENDLOOP.
CLEAR i_crhd.
CLOSE DATASET p_crhd.
IF sy-subrc NE 0.
    MESSAGE a039.                      "Error at close dataset
ENDIF.
OPEN DATASET v_crhd FOR OUTPUT IN TEXT MODE.
And then i have some FM (ex : WS_UPLOAD , WS_DOWNLOAD)
So I have changed the code for WS_UPLOAD by GUI_UPLOAD
                              and WS_DOWNLOAD by GUI_DOWNLOAD
now my problem is to know about some key word which how to work in ECC6 (for example ASSIGNING, REPLACE, TRANSFER. )
thanks in advance
Rathy

Getting PAR version and Kernel version with support level stack in Java

We want collect support information with a portal htmlb Java application (JspDynPage).
We need the versions of deployed PAR files and the version of the installed kernel with the installed support level stack.
Please help to get this information.

Rich,
Go to http://service.sap.com/swdc
Choose:
1. SAP Support Packages
2. Entry by Application Group
3. SAP NetWeaver
4. SAP NETWEAVER
5. Select your release (for example SAP NETWEAVER 04)
6. Entry by Component
7. Developer Studio
8. SAP NW Developer Studio 2.0
9. Win32
10. Select the version of NWDS you'd like to download: JIDE<SP><>.SAR (for example JIDE09_1-10002804.SAR, which is SP09 patch 1)
You'll need to download SAPCAR.EXE to extract the SAR file. You can find this by choosing Additional Components in step 3. After extraction you can install the software.
Kind regards,
Pascal

Steps to install SAP 4.7 EE with MS SQL 2000: URGENT

Hi all Basis Guru's
We are planning to install SAP 4.7 EE with DB: MS SQL 2000 on our new IBM server, we are already running a SAP server on our OLD SERVER and we just want to install the same in the NEW IBM SERVER for which i am seeking some expert help.
I wanted a document which can show me the steps to install SAP 4.7 and also MS SQL 2000,
I have pdfs released by SAP which i got from service market place under instguides section, but they are not soo helpful as i am a jr consultant the termninology used by them is not in my understanding..
So i request all, to send in a document which can easily assist me in installing SAP 4.7 and Ms SQL 2000 in step by step process
Also is it neessary for me to install the SP3 for Ms SQL 2000.
Reward points for sure...
Plz do help me in this as, this task has to be completed by 03-08-07 EOD.
Million Thanks in Advance
Regards
Hari Haran.V

Hi Juan,
I have done all the pre-installation steps accoring to the SAP released doc from the service market place...
but i get an error during the installation of the CI...(this is happening at the time of <i><b>EXTRA SAP SYSTEM KERNAL ARCHIVES</b></i>)
Here is the detailed LOG of the error.....
INFO 2007-08-02 18:50:39
Processing of host operation t_HostInfo_SHARED succeeded.
INFO 2007-08-02 18:50:47
The 'saploc' share exists at directory 'C:\usr\sap'. Choosing drive C: as SAP System drive.
INFO 2007-08-02 18:51:13
Successfully connected to PDPLMAIN\PDPLMAIN
INFO 2007-08-02 18:51:13
Executing check Product Version ...
INFO 2007-08-02 18:51:13
Script "Product Version" successfully executed
INFO 2007-08-02 18:51:13
Executing check Product Patch ...
INFO 2007-08-02 18:51:13
Script "Product Patch" successfully executed
INFO 2007-08-02 18:51:13
Executing check Product Edition ...
INFO 2007-08-02 18:51:13
Script "Product Edition" successfully executed
INFO 2007-08-02 18:51:13
Executing check Collation ...
INFO 2007-08-02 18:51:13
Script "Collation" successfully executed
INFO 2007-08-02 18:51:13
Executing check SysAdmin Rights ...
INFO 2007-08-02 18:51:13
Script "SysAdmin Rights" successfully executed
INFO 2007-08-02 18:51:13
Successfully connected to PDPLMAIN\PDPLMAIN
INFO 2007-08-02 18:51:13
Executing check Database existance ...
INFO 2007-08-02 18:51:13
Script "Database existance" successfully executed
INFO[E] 2007-08-02 18:51:36
Account group="pdplmain\SAP_LDAP" does not exist. <#1>
INFO[E] 2007-08-02 18:51:37
Account group="ORA_PD0_DBA" does not exist. <#1>
INFO[E] 2007-08-02 18:51:37
Account group="ORA_PD0_OPER" does not exist. <#1>
INFO[E] 2007-08-02 18:51:49
Account group="pdplmain\dbpd0ctl" does not exist. <#1>
PHASE 2007-08-02 18:57:16
SAP Web Application Server
PHASE 2007-08-02 18:57:16
Request common parameters of SAP System
PHASE 2007-08-02 18:57:17
Collecting information on database configuration
PHASE 2007-08-02 18:57:17
Create operating system accounts
INFO 2007-08-02 18:57:17
Copying file C:/SAPinst MSSQL SAPINST/keydb.xml to: C:/SAPinst MSSQL SAPINST/keydb.1.xml.
INFO 2007-08-02 18:57:17
Creating file C:\SAPinst MSSQL SAPINST\keydb.1.xml.
INFO 2007-08-02 18:57:18
Copying file C:/SAPinst MSSQL SAPINST/product.xml to: C:/SAPinst MSSQL SAPINST/product.1.xml.
INFO 2007-08-02 18:57:18
Creating file C:\SAPinst MSSQL SAPINST\product.1.xml.
PHASE 2007-08-02 18:57:33
Preparing OS account for MCOD installation
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:34
Request operating system user information
PHASE 2007-08-02 18:57:34
Request operating system user information
PHASE 2007-08-02 18:57:34
Request operating system user information
PHASE 2007-08-02 18:57:34
Request operating system user information
INFO 2007-08-02 18:57:35
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1801674531-606747145-839522115-500' on host 'pdplmain'!
INFO 2007-08-02 18:57:35
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1801674531-606747145-839522115-500' on host 'pdplmain'!
INFO 2007-08-02 18:57:35
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1801674531-606747145-839522115-500' on host 'pdplmain'!
INFO 2007-08-02 18:57:36
Evaluating all 'tNT_RegistryEntries' table rows succeeded.
PHASE 2007-08-02 18:57:38
Preparing DBMS-specific environment variables
WARNING 2007-08-02 18:57:38
Error 1332 (No mapping between account names and security IDs was done.
) in execution of a 'SetEntriesInAcl' function, line (661), with parameter ().
INFO 2007-08-02 18:57:38
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:39
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:41
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:42
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:44
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:45
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:46
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:47
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:48
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:49
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:50
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:51
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:51
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:52
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:53
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:53
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:54
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:55
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
PHASE 2007-08-02 18:57:55
Adapt filesystem
PHASE 2007-08-02 18:57:55
Prepare check/adapt SAP instance filesystem
INFO 2007-08-02 18:57:55
Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/prfclog exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0 exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00 exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/data exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/data/cache exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/exe exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/log exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/sec exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/work exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/exe exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/exe/opt exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/exe/dbg exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/exe/run exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/gen exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/gen/dbg exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/gen/opt exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/global exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/profile exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/src exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/tmp exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/tmp exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/EPS exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/EPS/in exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/EPS/out exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/EPS/log exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/bin exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/buffer exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/cofiles exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/data exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/etc exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/log exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/sapnames exists already. Nothing to do.
INFO 2007-08-02 18:57:56
Copying file H:/sapinst_mssql/NT/I386/UNINSAP.EXE to: C:\usr\sap\PD0\SYS\exe\run\..\UNINSTSAP.EXE.
INFO 2007-08-02 18:57:56
Copying file system node H:/sapinst_mssql\NT\I386\UNINSAP.EXE with type NODE to C:\usr\sap\PD0\SYS\exe\run\..\UNINSTSAP.EXE succeeded.
INFO 2007-08-02 18:57:56
Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
INFO 2007-08-02 18:57:57
Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
INFO 2007-08-02 18:57:58
Creating of all NT shares while processing the table 'tNT_SHARE' succeeded.
INFO 2007-08-02 18:57:58
Creating of all NT shares while processing the table 'tNT_SHARE' succeeded.
WARNING 2007-08-02 18:57:59
The specified service does not exist as an installed service.
! Error in execution of a 'OpenService' function, line (286), with parameter(s) (SAPPD0_00).
WARNING 2007-08-02 18:57:59
The specified service does not exist as an installed service.
! Error in execution of a 'OpenService' function, line (286), with parameter(s) (SAPOsCol).
PHASE 2007-08-02 18:57:59
Extract archives
INFO 2007-08-02 18:58:00
Processing of all file system node operations of table t_SAPComponent_Archives_FORMS_SHARED succeeded.
PHASE 2007-08-02 18:58:01
Extract SAP System kernel archives
INFO 2007-08-02 18:58:01
Creating file C:\SAPinst MSSQL SAPINST\SAPEXE.SAR.log.
ERROR 2007-08-02 18:58:01
MOS-01021 PROBLEM: .\sapcar.exe -xvgf H:\SAP_KERNEL_MSSQL_IA64/NT/I386/SAPEXE.SAR, -R C:\usr\sap\PD0\SYS\exe\run returned with '29'. CAUSE: See output './SAPEXE.SAR.log'. SOLUTION: Solve the CAUSE and retry.
ERROR 2007-08-02 18:58:01
FJS-00012 Error when executing script.
Waiting to hear from at the earliest
Regards
Hari haran.v

SAP Unicode Kernel 6.40 Oracle and Oracle 10g EE 10.2.0.1.0

Hi,
is it possible to use:
SAP Unicode Kernel 6.40 Oracle (ORACLE:AKK:6.40:UKERNEL:SAP Unicode Kernel 6.40 Oracle:LINUXX86_64:CD51031036)
with Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64b?
I have noticed the following:
cd /tmp/
SAPCAR.EXE -x -v -f /usr/sap/stage/SAP_KERNEL_64_BIT_UNICODE/51031036/UNIX/LINUXX86_64/SAPEXE.SAR
SAPCAR.EXE -x -v -f /usr/sap/stage/SAP_KERNEL_64_BIT_UNICODE/51031036/UNIX/LINUXX86_64/SAPEXEDB.SAR
1. ldd dboraslib.so
        libdl.so.2 => /lib64/libdl.so.2 (0x00002b9dd2f89000)
        libsapu16.so => not found
        libclntsh.so.9.0 => not found
        libwtc9.so => not found
        libc.so.6 => /lib64/libc.so.6 (0x00002b9dd318e000)
        libstdc+.so.5 => /usr/lib64/libstdc+.so.5 (0x00002b9dd34e1000)
        libm.so.6 => /lib64/libm.so.6 (0x00002b9dd37bd000)
        libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00002b9dd3a40000)
        libpthread.so.0 => /lib64/libpthread.so.0 (0x00002b9dd3c4e000)
        /lib64/ld-linux-x86-64.so.2 (0x0000003808200000)
SAPCAR.EXE -x -v -f /usr/sap/stage/SAP_KERNEL_64_BIT_UNICODE_Q3_08_PATCH/SAPEXE_247-10003358.SAR
SAPCAR.EXE -x -v -f /usr/sap/stage/SAP_KERNEL_64_BIT_UNICODE_Q3_08_PATCH/SAPEXEDB_247-10003360.SAR
1. ldd dboraslib.so
        libdl.so.2 => /lib64/libdl.so.2 (0x00002b8ff56b7000)
        librt.so.1 => /lib64/librt.so.1 (0x00002b8ff58bb000)
        libclntsh.so.9.0 => not found
        libwtc9.so => not found
        libc.so.6 => /lib64/libc.so.6 (0x00002b8ff5ac5000)
        libstdc+.so.5 => /usr/lib64/libstdc+.so.5 (0x00002b8ff5e18000)
        libm.so.6 => /lib64/libm.so.6 (0x00002b8ff60f4000)
        libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00002b8ff6377000)
        libpthread.so.0 => /lib64/libpthread.so.0 (0x00002b8ff6585000)
        /lib64/ld-linux-x86-64.so.2 (0x0000003808200000)
Oracle 10gEnterprise Edition Release 10.2.0.1.0 comes with libclntsh.so.10.1...
Regards,
Andreas Søbstad

Hi Hans,
Thank you for your reply. Here is the output
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 26-SEP-2007 11:34
:02
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=CAL-SLCU2-20)(PORT=1521)
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
Thanks & Regards,
Mike

Upgrade Kernel 620 to 640 in 32bit

Dear Gurús!!
Please, I need know about the apply the kernel 640 in the SAP Enterprise 47 SR1 with kernel 620.
I have Windows 2003, SQL 2000 32bit.
Best Regards
Luis

Hi Luis,
I upgraded kernel from 620 to 640 with any problem. Just download 640 kernel with latest patch, backup "\exe\run" catalog, unpack new SAR archive, copy new kernel to "\exe\run" catalog.
Next step is to register services SAPOsCol and <instance>name service in program sapstartsrv.exe
Regards,
Marcin Gajewski

Middleware problem -Outbound queue is stuck in SAP R/3 system with message

Hi Middleware gurus ,
We are stuck with a serious issue . We are trying to download Business partners from SAP R/3 4.6c system to SAP CRM 5.2 system using CRM Middleware
Previously we did a successful Initial download of 2 Business partners from SAP R/3 to CRM . Their BP numbers in CRM are 001 and 002 . The Delta load is working fine for the both the BPs which are already downloaded
Now , the real problem is when we are trying to download a new Business partner . When we set the Filter ( BP no 003 ) in MW adaptor object CUSTOMER_MAIN and start the Initial load again , we see that the Outbound queue is getting stuck with message STOP .
There are two queues generated in SAP R/3 system with names MASS_CRM_CUSTOME and R3AD_CUSTOME . The status for both the queues is STOP and when go for details it mentions sapsuck ..SAPMSSY1 -Message no. SR 053.
Even we checked the txn SMW01, the Bdocs message is "Recived ( Intermediate state) " for Bdoc type BUPA_MAIN.
We really dont as to why the Initial load worked fine with 2 BPs and later when want to do more BP Initial Load the Outbound queue is getting stuck
Also , by unlocking the 2nd queue R3AD_CUSTOME we are able to release it , but the first queue MASS_CRM_CUSTOME* is stuck
Please help us urgently
Regards
Dinesh and Ritvij
Email : [email protected]
Mobile -+91=9704933315

Hi Praveen and other Middleware gurus,
We checked on this . Actually the RFC is used for connecting to SAP R/3 system.
We also raised an OSS message on this and found a reply that in transaction CRMM_BUPA_MAP, we can map the required BP . But the SAP support guy recived an error received the error:
An RFC link is not maintained in the Middleware
Message no. CRM_BUPA_MAPPING051
We have set the RFC link , but still the problem continues!!!
Please help further..
Regards
Dinesh and Ritvij

Error in ABAP Mapping (type SAP-ABAP, kernel error ID UNCAUGHT_EXCEPTION)

Hi ,
Scenario: Manually Purchase Order is created, automatically Sales Order should be created in the Target System through PI,
                   I have used Message Mapping which is working fine for single Customer and Vendor,
                   For Multiple Customers and Vendors i am using one ZTABLE, Only Message Mapping is not sufficient to my requirement.
                  Now i am using both Message Mapping and   ABAP Mapping at a time in Interface Mapping. I created the class and                done the   development., whene i run the scenario i am getting the error as below,
*<SAP:Stack>Error in mapping program ZCL_SD_IDTO_POSO (type SAP-ABAP, kernel error ID UNCAUGHT_EXCEPTION) An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause Dereferencing of the NULL reference</SAP:Stack>*
*<SAP:Retry>M</SAP:Retry>*
*</SAP:Error>*
Please let me know.
Best Regards
Vamsi

Have u seen the ABAP mapping guide?
Refer this series to the ABAP mapping section.https:///people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
It will be very handy and useful.

Perform Client import/export SCC8 with different release component between server

Dear All
Isn't possible to perform Client import/export SCC8 with different release component between server.?
Currently the condition of between two system as follows
Source Server : SAP ECC6.0, Component SAP_APPL, release 602 level 16
Target Server : SAP ECC6.0, Component SAP_APPL, release 600 level 24.
This problem happens due we was unable to downgrade the release and patch the latest support pack of SAP_APPL reelease 600.
Thank You, your help is much appreciated.

No..

SAP ECC 6.0 with DB2 on winds 2008r2 using VMware

Dear All,
Request you to guide me in giving some information related to
-compatibility
-best practice
-official guidelines for SAP installation.
We have purchased SAP ECC 6.0 with DB2 as RDBMS.
Thanks in advance.
by
Harika N

I got information
Note 1130801 - DB2 LUW, DB2 z/OS release for VMware, XEN, and Hyper-V
The usage of DB2 Version 9.1 for LUW, DB2 Version 9.5 for LUW, and DB2 9.7 for LUW on Windows and Linux (SUSE and RedHat) with VMWare, KVM, and XEN is permitted and supported by SAP and IBM.
Kind regards,
Harika N

Problem with my release strategy (PR), Please help

Folks,
I have designed a release strategy with three characteristics:
This is what I entered in characteristic
1.PRQuantity with table name MEREQ3211GRID and Field :MENGE
2.PRmaterial # with table name RMMG1 and Field :MATNR
3.PRPlant with table name RMMG1 and Field :werks
the value for PRQuantity is >= 10000,000.
Also, I have set the indicator for (allow interval) in characteristics
Classes, procedure with classification, Release startegies are all proper.
I am getting the Release startegy tab in PR, but the problem is when I adopt a PR to create a PO with PO quantity >=10000, the release starategy gets picked up, which is perfect but it is also getting picked up with PO Quantity <=10000.
I dont understand why is it getting picked up for <=10000..Please suggest!!
Thanks in advance!!
Megha

Megha,
In your original post you said,
"1.PRQuantity with table name MEREQ3211GRID and Field :MENGE
2.PRmaterial # with table name RMMG1 and Field :MATNR
3.PRPlant with table name RMMG1 and Field :werks"
Per documentation I have seen, the table you should use for your characteristics for PRs should be CEBAN and CEKKO for POs. Here are some links to SAP notes you may find useful.
[365604 - Release strategies in purchasing|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=365604]
[493900 - Release Strategy|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=493900]
[672719 - Release strategies in the service|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=672719]
Note 365604 may be by far the most descriptive of how to set up the entire process. Hope this helps if you are still having problems.
Regards,
Paul

SAP 700 Kernel compability with 640 Release

Similar Messages

Maybe you are looking for