SAP 8.82 para SAP 9.0, SAP 9.1

Bom dia pessoal,
Atualmente utilizo o SAP 8.82 na empresa, estava pensando mais para o começo do ano que vem fazer a migração para SAP 9.0 ou até o mesmo o SAP 9.1 (para esta versão tenho que esperar os add'ons nacionais terem versão funcionando).
Por acaso alguém já fez a migração da SAP 8.82 para o SAP 9.0? gostaria de saber se teve muitas dificuldades com os usuários, problemas em banco de dados, computadores, redes, etc.
Tenho uma maquina virtual rodando o SAP 9.0 PL13 onde sempre pego minha base atual na 8.82 e converto pra ela pra fazer alguns testes básicos, até o momento o que deu trabalho é alterar todos meus relatórios em Crystal Reports que utilizam documentos de makerting (pedidos, notas, etc) pra  testar o campo de cancelamento "CANCELED".
Um grande abraço,
Fabio
SAP 8.82 PL14 / SAP 9.0 PL13 (test) / SAP 9.1 PL2 (test).

Ola pessoal,
segue algumas observações dos problemas que ocorreu comigo na conversão do SAP 8.82 PL14 para SAP 9.0 PL15.
1) Update do software nos computadores/terminais
- Quase nenhum update deu certo, quando chegou no 3o computador descobri o motivo, o SAP tenta fazer update de vários componentes no modo automatizado, você não vê mas ele roda vários "setups" de vários programas diferentes, um deles é o "Microsoft C++ 2010 Runtime".
Antes de entrar no SAP no terminal pra fazer o update, eu comecei a instalar o runtime manualmente, entre na pasta "...\B1_SHR\Client\ISSetupPrerequisites\{83960519-644A-4722-BA7A-37D23C1D004F}" e instalei o programa "vcredist_x86".
Pronto, após instalar o runtime do C++, foi só entrar no SAP 8.82 que ele fazia corretamente o update para o SAP 9.0.
2) Erro contas a pagar e a receber Could not find stored procedure 'TmSp_SetBgtAccumulators_ByJdt"
Após vários testes na minha conversão "beta" do SAP 8.82 PL14 para o SAP 9.0 PL11 (e PL15 agora em janeiro), onde fiz vários procedimentos referente a compras, vendas, cadastros, mrp etc, tudo funcionou perfeito.
Após a conversão na base real (base quente) ontem, hoje trabalhamos tranquilamente, pedido de compra, nota fiscal de entrada,, ,pedido de venda, nota fiscal de saída, e validação de nota, e tudo continuava funcionando bem, mas ocorreu um erro bem estranho na baixa do contas à pagar e à receber.
Na conversão do banco, não deu erros e nem avisos, onde foi convertido com sucesso, mas por algum motivo a conversão do SAP 8.82 PL14 para o SAP 9.0 PL15 apagou a procedure abaixo, fazendo com que o sistema apresentasse erro na baixa do financeiro.
"Could not find stored procedure 'TmSp_SetBgtAccumulators_ByJdt'"
Após pesquisa na internet, encontrei no próprio fórum a solução.
http://scn.sap.com/thread/3468903
Para resolver o caso, segui o que estava no post acima, é só entrar em Ajuda, Suporte Desk, Restaurar, Restaurar Procedimentos Arquivados.
Não pode ter ninguém conectado no banco de dados para rodar esse procedimento, após a execução, o financeiro funcionou perfeito.
Abraço
Fabio
SAP 9.0 PL15 / SAP 9.1 PL3 (test)

Similar Messages

  • I need file "com.sap.km.cm.par" for EP6 SP 19

    Hello all:
    I need file "com.sap.km.cm.par" for EP6 SP 19. By error, I overwrote the original com.sap.km.cm.par and the com.sap.km.cm.par.bak into the deployment folder.
    Could someone indicate me where could I donwload it from?
    Thanks in advance,
    Alejandro Gómez.
    P.D.: Excuse my bad English.

    Hi Alejando,
    I will send it to you in some minutes.
    Hope it helps
    Detlev
    PS: Please consider rewarding points for helpful answers / actions on SDN. Thanks in advance!

  • Licença de SAP Netweaver Portal para Processo de B2B

    Pessoal, boa tarde!
    Alguém sabe me dizer se para utilizar o SAP Netweaver Portal para os processos de B2B é necessário comprar licença SAP ou está incluso no pacote onde a empresa compra o GRC e o PI?
    Essa licença do PI que a empresa tem direito nessa compra, é somente para o processo de NF-e ou ela pode utilizar para integração com outros processos e sistemas?
    No aguardo, obrigado.
    Danilo

    Danilo,
    a licenca do NFE inclui:
    - Netweaver runtime: licença Web AS (ABAP e Java) para rodar os componentes SLL-NFE e SLL-NFE-JWS.
    - PI runtime: exclusivamente para utilizacao das interfaces do XI Content de NFE (SWCV SAP SLL-NFE 1.0).
    Se vc precisa do PI para outras interfaces e/ou precisa do Portal para disponibilizacao de telas para clientes/fornecedores, essas licencas realmente estao fora da licenca do SAP NFE 1.0.
    Att,
    Henrique.

  • After deploying a customized com.sap.layouts.framework.par

    Hi all,
    after we deployed a customized com.sap.layouts.framework.par to our portal we got blank portal pages after login. Now we want to upload the SAP standard layout par file. How we can reload it? Or is it possible to deploy a patched SCA file via SDM? If this works how we can identify which software components needs to be redeployed.
    Thanks in advance for your support.
    Best regards.
    Mike

    Hi Mike,
    It is not recommended to modify directly in SAP namespace. You must always copy the standard PAR file and rename to com.<clientname>.layouts.framework.par -> customize -> upload on Portal so that standard is not affected.
    Now to recover from your current problem - do you have another Portal instance eg - QUALITY or PROD portal?,
    if so you can navigate in that system to System Admin - Support - Portal Runtime - Browse Deployment -  Download the com.sap.portal.layouts.framework.par.bak
    In the problematic system - go to System Admin - Support - Administrator Console - Archive uploader - Upload the downloaded working PAR. (You have to remove the .BAK extension before uploading)
    Hope this helps.

  • Location of com.sap.portal.dsm.par in SP23 of NW2004

    Hi all,
    For an issue discovered in SP22(SAP Note 1235253), SAP has provided a work around. Thats to take a file com.sap.portal.dsm.par from SP23 and deploy using SDM.
    But i am not sure in which SDA/SCA this particular file is present.
    Please let me know the SDA/SCA file where i can find com.sap.portal.dsm.par.
    Regards
    Venkatesh

    Hello,
    What I want to do is to put the logon page in the light framework page so that the users can login from the anonymous portal. After I customize the logon page I want to create aniview in the detailed navigation.
    If you want to see the jsp files that the com.sap.portal.runtime.logon.par file you have to go to the file system and copy the .par.bak file , rename it to .zip and all the files are there.
    But my question is if this is a par file that is deployed in the portal , why I cant create an iview from this par file? From other forums I have read they say that creating an iview from this par file it will put the logon page where you want. But when I try to create an iview from PAR File the com.sap.portal.runtime.logon doesn't appear in the list of available par files.
    Please help me on this and will give rewarding points.
    Thanks
    Luis

  • SAP  Bussiness One para Iphone

    Hola,
       Estoy tratando de generar la integración a mi movil Iphone pero si resultado probe con el puerto 8445 y los certificado SSL, también tengo activa la licencia Bi mobile y los regitros de usuario movil  pero no tengo resultados positivos en la conexión me indica que falla la conexion con el servidor (-1004)
    Alguna ayuda pls...
    Saludos
    Fabian...

    Estimados,
    Adicionalmente a lo anterior, les remito información de  otra nota que puede ser de utilidad para solventar los problemas
    SAP Business One Notes
    Statistic124| Printer-Friendly Version | PDF Version | Add to favorites | Subscribe | Quick link
         1602674 - SAP Business One mobile app for iOS - Troubleshooting and compatibility information
    Version   89     Validity: 02.09.2014 - active
    Symptom
    You followed the documentation for the "SAP Business One mobile app for iOS", however, the mobile application does not work properly and you require assistance with troubleshooting.
    If you are using SAP Business One mobile app for Android see SAP note 1924930.
    Solution
    This document contains a list of frequently asked question and troubleshooting tips for the "SAP Business One mobile app for iOS":
    SAP Business One mobile app for iOS - Version Information
    SAP Business One mobile app for iOS - Compatibility Concept
    Troubleshooting Tool
    Error: “Permission Denied”
    Error: "Connection Failed - The request timed out. (-1001)", “Processing Failed - Internal server error; contact your system administrator”
    Runtime issues
    Device ID in version 1.10.0 and higher (error: “Permission Denied”)
    Troubleshoot SAP HANA features in the SAP Business One mobile app
    1. SAP Business One mobile app for iOS - Version Information
      The following table shows relevant mobile app versions and their major features. It also shows which backend version is required to enable all the latest app functions.
    Note that the app version and the backend version are not mandatorily coupled, however the version combination has an impact on a specific function.
    For information about the compatibility concept, see SAP Business One mobile app for iOS - Compatibility Concept. 
    App Version
    What’s New
    Main new features only supported in
    conjunction with backend version (or higher)
    1.11.1
    • Cockpit and advanced dashboard integration for SAP HANA (iPad only)
    • Support for downloading/uploading attachments to business partners, sales documents, activities, and service calls
    • Function for copying contacts from business partners to device address book and vice versa
    • Display of delivery documents
    • Enforcement of valid SSL certificates (SAP Notes reference 2019275)
    • Option for providing feedback about the app
    • Improvements for sales documents, sales catalog, activities, and business partners (such as Customer Ref No. and Business Partner Project for sales documents, price list for business partner, tab “My” for business partner, system fields selection for sales catalog, and address field for activity)
    Attention: Valid SSL certificates are mandatory for SAP Business One mobile apps now, you need to have a valid SSL certificate! Please see SAP note 2019275 for details
    SAP Business One 9.1 PL05
    SAP Business One 9.1, version for SAP HANA PL05
    1.10.3
    • Optimizations for iOS 8 and iPhone 6 / iPhone 6 Plus
    • Mobile approval remark optional (SAP Notes reference 2045807)
    • Activities module stuck in mobile app (SAP Notes reference 2090470)
    • Address component is missing in Sales Order/Quotation created in mobile app (SAP Notes reference 2081968)
    n/a
    1.10.1
    • Advanced security concept for SSL connections and configurable warning of invalid SSL certificates - see SAP note 2019275
    • The Apple Mac address is replaced with a device ID and “Permission Denied” is displayed on incorrect device ID setting
    • Several technical improvements
    n/a
    1.10.0
    New functions:
    • Sales documents undergo significant enhancements, such as print layout, multiple item selection, editable header information in opportunities, and sales employee assignment in header or stage information
    • Added module ‚Activities‘ with substantial functional extensions, such as activity type and follow up definition for subject and activity level
    • Improved Sales Catalog supports price lists, user defined fields selection, and refresh of single products
    • Alerts allow to drill down to the document
    • Instant printing of documents and reports with AirPrint
    • Extensive personalized settings for each module
    • Modified concept for extending the app
    Please note further change:
    Device ID replaces the Apple MAC address, changing mobile user master data is required. For more information see Retrieving the Mobile Device ID in the Full Guide / Documentation: SAP Business One for iOS
    SAP Business One 9.0 PL12
    SAP Business One 9.0, version for SAP HANA PL12
    SAP Business One 9.1 PL00
    SAP Business One Cloud 1.1 PL02
    1.9.6
    • Support for SAP Business One Cloud 1.1 and SAP Business One 9.0, version for SAP HANA PL03
    • Several minor technical improvements
    n/a
    1.9.5
    • iOS 7 user experience
    • Enterprise search for SAP Business One analytics powered by SAP HANA (currently only available on iPad)
    • Enhanced user-defined fields (SAP Notes reference 1904867)
    • Map for Business Partner addresses (SAP Notes reference 1901170)
    • Several minor improvements
    SAP Business One 8.82 PL13
    SAP Business One 9.0 PL06
    SAP Business One 9.0, version for SAP HANA PL02
    SAP Business One Cloud 1.0 SP02
    1.9.3
    • Enhanced user-defined fields (SAP Notes reference 1886340)
    • Contact Person ID field supports special characters (SAP Notes reference 1874087)
    • User defined code in SBO_SP_TransactionNotification (SAP Notes reference 1882062)
    SAP Business One 8.82 PL13
    SAP Business One 9.0 PL06
    SAP Business One 9.0, version for SAP HANA PL02
    SAP Business One Cloud 1.0 SP02
    1.9.1
    • Sales catalog showcasing products with descriptions and illustrations, featured by interactive comparison and order/quotation integration (iPad only)
    • Assignment of sales employees when editing sales orders or sales quotations
    • Option of adding activities to sales opportunities
    • Filters for lists of business partners, opportunities, and service calls
    • Payment terms and default pricelist for business partners
    • Support for SAP Business One 9.0 (in conjunction with SAP Business One 9.0 PL04 only)
    • Features for pervasive analytics on SAP Business One 9.0, version for SAP HANA, such as cube data source, predictive ability, and a customized dashboard
    SAP Business One 8.82 PL12
    SAP Business One 9.0 PL04
    SAP Business One 9.0, version for SAP HANA PL00
    SAP Business One Cloud 1.0 SP02
    1.8.4
    This patch fixes the following issues:
    • Dashboards aren’t refreshing on iOS 6.0 or higher (SAP Note 1812643)
    • “Error - Cannot get document details” on opening Sales Quotations (SAP Note 1812716)
    • Pervasive analytics is not available for SAP Business One 8.82, version for SAP HANA (SAP Note 1823852)
    • The report module is missing when connected to SAP Business One Cloud 1.0 (SAP Note 1800897)
    SAP Business One 8.82, version for SAP HANA PL02 /
    SAP Business One 8.82 PL11
    1.8.1
    Several new scenarios* in conjunction with SAP Business One, version for SAP HANA, which uses SAP's in-memory technology:
    • Enterprise Search integration
    • Pervasive analytics for BPs and inventory
    • Cash flow forecast dashboard
    • Available-to-Promise (ATP) check when creating sales orders
    • Delivery rescheduling for existing sales order items
    Additional enhancements include:
    • "Warehouse" and "Delivery Date" can be changed for existing document items
    • Inventory can be displayed by warehouse when creating sales documents
    • User-defined fields are supported at document row level
    • Validation check is performed for mandatory user-defined fields
    • Date picker supports time selection for task-type activities
    • SAP Business One Cloud is supported with a domain user logon and an automatic configuration using the link from an e-mail
    * Some of these scenarios are only available on iPad, please see the Full Guide / Documentation for details.
    SAP Business One 8.82, version for SAP HANA PL01 /
    SAP Business One 8.82 PL10
    1.7.5
    This patch fixes an issue on the iPhone, where an item that is added to a sales order or quotation may overwrite an existing item (SAP Note 1780603)
    SAP Business One 8.82 PL09
    1.7.0
    • Non-concurrent access with up to two mobile devices per user allowed
    • Support of selection criteria for the SAP Crystal Reports software
    • Selection of a company database from a list at logon
    • Enhanced sales documents with additional options for handling, viewing, and editing
    • Use of SAP's in-memory technology with generic support of SAP Business One, version for SAP HANA
    • Optimized for iOS 6 and iPhone 5
    SAP Business One 8.82 PL09
    1.6.0
    • Sales order enhancements, such as approval, additional fields, and default BP currency
    • Improved user interface for iPad
    • Multiple Branches support (Brazilian localization, refer SAP Note 1648713)
    • MAC address of device used for authorization instead of UDID (find MAC address in settings->General->About->Wi-Fi Address)
    Please note: Version 1.6.0 requires iOS 5.0 or later
    SAP Business One 8.82 PL06
    1.5.0
    • Creation of Sales Order/Sales Quotation
    • Handling of Service calls
    • The last version to support iOS4.x - Please note: Last version for iOS lower than 5.0
    SAP Business One 8.82 PL03
    1.4.0
    • Creation of sales opportunities
    • Customizable KPI/home screen layouts and extended to-do list
    • New module "Service Contract", barcode scanning for goods service
    • Additional dashboard "Purchase Quotations" - dashboards offer improved performance, and option to send using email
    • Integration of the documentation and customer specific help
    SAP Business One 8.81 PL09
    1.3.0
    • View your business partner related sales documents (sales quotation/sales opportunity/sales order)
    • Set a specific SAP Business One company database in the app. For more information, refer SAP Note 1606567
    • Monitor your key business data such as sales analysis and cash flow in the new interactive dashboards
    • Create or modify business partner address and contacts now
    • Synchronize your SAP Business One activities into the calendar of the device
    • Benefit from a faster server-connection, simplified UDF logic, the retina display support on iPhone 4, and enjoy our new overall design
    SAP Business One 8.81 PL07
    1.2.0
    • User authorization considered on the functional level
    • Detailed information about stock, listed by warehouse
    • User-defined fields (UDF) can be displayed in master data and transactions
    SAP Business One 8.81 PL05
    Top
    2. SAP Business One mobile app for iOS - Compatibility Concept
    SAP regularly ships minor releases or patches for the app containing new functions as well as improvements and bug fixes. To benefit from this, the latest version of the app and the backend software must be run.
    As updates on mobile devices are not typically managed by a central IT department, it is the responsibility of end users to update the app to the latest version.
    Because the mobile app is both backward and forward compatible, it is always safe to upgrade the app on the mobile device; the backend server can remain on the current release of SAP Business One.
    However, if the backend is installed on an older version of SAP Business One that does not support the latest functions of the most recent mobile app, some new functions will not work. When the user accesses such a function a pop-up window appears, informing the user that the backend must be upgraded to enable the selected function. All mobile app functions that were supported by the older version of SAP Business One still work. In the reverse case, if the backend is installed on a later version of SAP Business One than the mobile app, the functionality of the mobile app is fully maintained and works as designed.
    Top
    3. Troubleshooting Tool
    The troubleshooting tool checks a) whether the user is authenticated b) whether the mobile settings are correct. Refer to SAP Note 1840117 for details and instructions.
    For B1iF 1.17.5 (SAP Business One 8.82 PL12 and 9.0 PL04) and above versions, this tool is built-in to the Integration Component (Tools -> Trouble Shooting -> Select [B1 Mobile] in Functional Group -> Click Submit)
    For versions below B1iF 1.17.5, the tool can be installed manually, refer to SAP Note 1840154
    Starting from B1iF version 1.20 on (SAP Business One 8.82 PL17 and 9.0 PL12), this tool can also be used with SAP HANA database
      Top 
    4. Error: “Permission Denied”
    This error type shows that the server is accessed properly and returns an answer to the mobile. The error message on mobile contains relevant information which helps troubleshooting, such as: company DB, user ID, phone number, and Device ID. The most common root causes are:
    Root Cause 1: SAP Business One user settings(Administration->Setup->User) is incorrect
    Solution 1:
    The user is not configured as a mobile user. Make sure the mobile check box is selected.
    The phone number entered in the mobile device settings (Settings->Business One) does not match the definition in SAP Business One. In case of iPad use a dummy number like 1234 for validation.
    Make sure the license server works properly. Ensure the correct license is assigned to the user. B1i technical user shall have B1i license and all the mobile users shall also have B1i license together with one of the following licenses: Professional, Limited Financial, Limited Logistics, Limited CRM, Starter Package, CRM Sales User (legacy) and CRM Service user (legacy).
      o The device identifier / Mobile Device ID is incorrect: 
    For app versions 1.10.0 and higher: See 7. Device ID in version 1.10.0 and higher
    For lower than iOS 7 and app versions 1.6.0 to 1.9.x:
    SAP Business One mobile app for iOS uses the MAC Address of the respective mobile device for the Mobile Device ID field in SAP Business One user settings (see section ‘Activating Mobile App Users’ in the Full Guide / Documentation). Ensure that the MAC address of device (find MAC address in Settings->General->About->Wi-Fi Address) is correctly entered in user master data.
    For iOS 7 and higher and app versions 1.6.0 to 1.9.x:
    In iOS 7, the MAC Address is not available anymore as in lower iOS versions. The system always returns the value 02:00:00:00:00:00 for the MAC address of a device.
    If using SAP Business One mobile app for iOS up to version 1.9.x, and upgrade to iOS 7, the mobile user fails to logon. The “Permission Denied” error on the screen shows value 02:00:00:00:00:00.
    To make SAP Business One mobile app for iOS up to version 1.9.x work on iOS 7 devices, you need to set the Mobile Device ID field in SAP Business One user settings to value 02:00:00:00:00:00; this is specifically for all users accessing using iOS 7 devices.
    Root Cause 2: The company is not listed in the SLD (Integration Explorer -> SLD) or there are old or inconsistent entries in SBO-COMMON->SLSP or SLSPP tables
    Solution 2: The steps to recreate the entries.
    Make sure all SAP Business One clients are closed.
    Log in Integration Explorer -> Scenarios -> Setup -> Select B1system and make it active.
    Stop B1i services (DI Proxy, EventSender and Integration)
    Use below query to delete all entries of SLSP and SLSPP tables in SBO-COMMON database.
    delete from SLSP
    delete from SLSPP
    Restart B1i services (DI Proxy, EventSender and Integration)
    Now open SAP Business One client, click choose company, then click Refresh button.
    If it doesn't resolve the issue, follow the solution provided in note 2032666.
    Root Cause 3: [hostname] is used in some configuration settings, and [ip-address] is used in others.
    Solution 3: Ensure you use exclusively either the [hostname] or the [ip-address] in all the following configuration settings:
    Integration Framework > SLD > B1i Server > [company database] > B1DI > b1Server
    Integration Framework > SLD > B1i Server > [company database] > JDBC > url
    Integration Framework > SLD > B1i Server > WSforMobile > WSAR > associatedSrvIP
    EventSender Setup > Step 1 > DB Server Name
    License Manager > Configure Security > DB Server
    Root Cause 4: The mobile device is on iOS 7.0.1 or higher and the mobile app version lower than 1.9.5. In the login window, the field 'Password' and the option 'Choose Company' are missing.
    Solution 4: Update to SAP Business One mobile app 1.9.5. for iOS.
    Root Cause 5: DI proxy service is not started with administrator user
    Solution 5: Open Services panel → right click [SAP Business One DI Proxy Service] → Properties → Log On tab → choose "This account" → type windows logon administrator user → click [OK] → Restart the service.
      If none of the listed root causes can be identified, go to Integration Framework -> Monitoring -> Process Control ->Framework Processes-> B1AuthCheck ->IPO log, and check its relevant IPO logs and ExecDetails. For example, whether the correct DB is called, or reasons for failed authentication check. 
    Top
    5. Error: "Connection Failed - The request timed out. (-1001)", or “Processing Failed - Internal server error; contact your system administrator”
    For troubleshooting, please first:
    Verify the connection between the mobile device and the B1i server, see SAP Note 1776825 for instructions.
    Check if these test connections can be executed successfully:
    Integration Framework > SLD > B1i Server > [company database] > B1DI
    Integration Framework > SLD > B1i Server > [company database] > JDBC
      In case of errors, please refer to SAP Note 2029714. 
    Check if B1i tasks/messages are blocked in the queue via Monitoring -> Queue Monitor. If so, check whether any IPO steps are deactivated. (Control Center -> Monitoring -> IPO-Step Status -> Select “Deactivated Steps only “ -> Press submit -> If there are any IPO steps listed. Press (Re)activate button to  process the queue.
    Other common root causes are:
    Root Cause 1: Inconsistent SSL configuration.
    Solution 1:B1i uses port 8443 as the default for SSL connections of the mobile solution. The ‘Web Service’ in the mobile app setting needs to be <server_ip_address>:8443 and have SSL ‘ON’, as the default.
    Root Cause 2: Some or all mobile scenarios are not activated correctly.
    Solution 2:Open Integration Framework -> Scenarios -> Setup -> Scenario steps -> Check all steps are enabled (Eg:It should be “94 of 94”, which means there are totally 94 steps and all of them are activated. If it looks like something like “76 of 94”, it means there are inactive steps.)
    Choose the “Deactivate” button to deactivate the mobile package. After this, the button changes to “Activate”.
    Choose the “Steps” button, a web page would pop up.
    Choose the “all Activate” and then click the save button. After that, close this popup.
    After a few seconds, all scenario Steps should become something like “94 of 94”.
    Choose the “Activate” button to activate the mobile package. It should pop up a confirmation dialog box, choose the "OK" button.
    Root Cause 3: [hostname] is used in some configuration settings, and [ip-address] is used in others.
    Solution 3: Ensure you use exclusively either the [hostname] or the [ip-address] in all the following configuration settings:
    Integration Framework > SLD > B1i Server > [company database] > B1DI > b1Server
    Integration Framework > SLD > B1i Server > [company database] > JDBC > url
    Integration Framework > SLD > B1i Server > WSforMobile > WSAR > associatedSrvIP
    EventSender Setup > Step 1 > DB Server Name
    License Manager > Configure Security > DB Server
    Root Cause 4: The password has unsupported characters such as “&”, “<” and “>”
    Solution 4: Avoid using such characters for mobile users.
    Root Cause 5: The default port 1433 is not used by the selected database instance.
    Solution 5: The TCP IP port of the SQL database instance should be changed to 1433
    Root Cause 6: sap.B1Mobile package is not correctly deployed
    Solution 6: Ensure sap.B1Mobile package activation status is all green (Integration Framework > Scenarios > Control > Click [Status] button for sap.B1Mobile record)
    Make sure the SLD entry '001sap0003' is not selected in the senderlist of any package except Mobile package (Integration Framework > Scenarios > Setup > Click [Sender] > Choose [Sender List])
    Reactivate sap.B1Mobile package
      Top 
    6. Runtime issues
    Cannot view the BP or Item Master Data list in the Mobile app.
    Root Cause 1: The SQL language setting for the sa user was set to another language than English.
    Solution 1: Set the SQL user (normally the sa user) language to English.
    Root cause 2: The DateFormat parameter in the SQL Server is set to another value than ymd.
    Solution 2: Run the query 'Set DateFormat ymd'
    "Not Data" is displayed when trying to view Dashboards on the mobile device.
    Root Cause 1: The PackagType column in table OWPK has an incorrect value for mobile dashboards.
    Solution 1: Run the following query in company database to update the values:
      UPDATE OWPK SET PackagType='M' WHERE PackagCode LIKE 'SAP_MOBILE_DASHBOARD_00%'
    Top
    7. Device ID in version 1.10.0 and higher (error: “Permission Denied”)
    Since SAP Business One mobile app 1.10.0 for iOS a new device identifier has been introduced. When using the app for the first time, a system message appears:
    Apple MAC address is no longer supported for device ID authorization checking since iOS 7. To enable access, update the device ID with <your device ID>
    From within this message, mobile users have the option to email the device ID in the email body to their IT partners or administrators in order to change that data in the user master data. For more information see Retrieving the Mobile Device ID in the Full Guide / Documentation: SAP Business One for iOS.
    If the device ID of the mobile user is not correct, the error: “Permission Denied” is being displayed and logon to the mobile app is not possible.
    Top
    8. Troubleshoot SAP HANA features in the SAP Business One mobile app 
    Please refer to SAP notes 2048889 and 2012800.
    Top
    Header Data
    Released On
    06.03.2015 12:34:55
    Release Status
    Released for Customer
    Component
    SBO-INT-MOB Mobile Applications
    Other Components
    SBO-INT-B1IF SAP Business One integration framework
    Priority
    Recommendations/additional info
    Category
    Consulting
    Validity
    Software Component
    Version
    SAP B1 ANALYTICS ON SAP HANA
    All versions
    SAP B1 IOS APPLICATIONS
    All versions
    SAP B1 VERSION FOR SAP HANA
    All versions
    SAP BUSINESS ONE
    8.8
    8.81
    8.82
    9.0
    9.1
    References
    This document refers to:
    SAP Business One Notes
    2048889
    HANA features do not work on the SAP Business One mobile app.
    2032704
    Unable to add sales opportunity document if the sales employee is inactive
    2032666
    SAP Business One company database entries missing from integration framework SLD
    2029714
    Resolving errors that occur in SAP Business One DI test connection in integration framework SLD
    2019275
    SAP Business One mobile apps require a valid SSL certificate
    2012800
    Dashboards and Enterprise Search Not Working in mobile app on SAP Business One 9.0 PL09 HotFix 1, version for SAP HANA
    1995395
    User without Authorization can view sales documents in the Mobile App
    1951641
    How to view SAP HANA-based SAP Crystal Report in SAP Business One analytics powered by SAP HANA using SAP Business One mobile app
    1924930
    SAP Business One mobile app for Android - Troubleshooting and compatibility information
    1788341
    SAP Business One mobile app does not support NCLOB data column in SAP Crystal Report on SAP HANA
    1776825
    Verifying the connection between mobile device and the B1i server
    1775611

  • Data transfer b/w SAP to Java using IDOC and Interface SAP Jco

    Dear Experts,
    The challenging requirement we are having is, we need to create the interface for data transfer between SAP system and the Java system. The data will be transferred from SAP to java and similarly once some processing done in Java again the details needs to be transferred from Java to SAP.
    For this data transferred we are planning to use IDOC process and for interface "SAP Java connector (Version 3.0.5)" we are planning to use. As per our understanding, from Java side one program needs to be written to connect with SAP as "Registered program". This registered program will appear in SAP GATEWAY automatically and using tRFC, TCP/IP connection both SAP and Java system will be connected.
    In this case we are having some doubts.
    1. The data from SAP is going to be transfered from one Custom transaction (Z tcode). Once "Outbound IDOC" will get triggered and will carry the details. Now the doubt is, whether the data / details will get transfered to JAVA system automatically or we need to perform any other steps from SAP ABAP coding...(like converting in to flat file, XML file and etc) ??
    2. We are planning to install "SAP Jco" in Java server. Is this correct...??
    3. Other than SAP Jco any other softwares needs to be installed or not..??
    4. Since we are going to trigger the "outbound IDOC" from custom transaction, we are planning to develope one program in SE37. Other than this any other program we need to develop or not..??
    5. Any sample Java program for the SAP Jco version 3.0.5 to create the "Registered program" with SAP..? (e.g. SAP Listener program).?
    If anybody has detailed steps or explanation please share it with us.
    Thanks in advance
    Warm Regards,
    VEL

    Hi All,
      For the above mentioned issue, we implemented JCo software in JAVA system and created the JAVA program including SAP logon credential details like Client, User name, password and Language details.
    When this JAVA program was compiled successfully then, that non SAP system will appear in SAP gateway Tcode.
    Once non SAP system started appearing in SAP gateway that means, both SAP & Non SAP are connected automatically.
    Regards,
    Velmurugan P

  • SAP Strategy Management (SSM) 7.0 to SAP BI communication

    Hi
    We are trying to create a connection from SAP Strategy Management 7.0 (SSM) to SAP BI 7.0. What kind of SAP user type should be used for the communication (dialog, system, u2026)?
    Kind regards
    Erik

    Anuj,
    In order to use SAP OLEDB connection type for the LinkID, there are a few dll files that you need to make sure to have on the latest version. I'm not sure right now which ones they are, but anyway that is one of the reasons SAP now only supports BAPI as the connection mode to BW. It is not dependent on any dlls and so it is less likely you run into errors because of anything that is unrelated to the product.
    I would therefore advise you to establish the connection to BW using BAPI. Perhaps the following note can help you:
    [Note 1297726 - Enabling BAPI connections within Application Server|https://service.sap.com/sap/support/notes/0001297726]
    Best regards!
    Ricardo Vieira

  • SAP Business one 8.8 Integration for SAP Netweaver

    hi all,
    Where to download SAP Business one 8.8 Integration for SAP Net weaver Components(Installation Packages for 32 bit). I installed one B1iSN but its only Integration for SAP Business One Not for SAP Business one 8.8 Integration for SAP Net weaver.
    Please send me the link. Its urgent
    Thanks & Regards
    B.Lakshmi Narayanan

    Hi
    [https://websmp104.sap-ag.de/sbo-swcenter]
    Software Distribution Center >SAP Business One Products > Updates
    SAP Business One 8.8 >>>  SAP B1 8.8 INTEGRATION FOR NW >>>Comprised Software Component Versions
    B1 8.8 INTEGRATION CONTENT
    B1 8.8 INTEGRATION SIM
    B1 8.8 INTEGRATION TECHNOLOGY
    Hope you find.
    Thanks
    Kevin

  • How to remove Decimals in Quantity Objects in SAP BO Explorer View created on top SAP Bex Query?

    Hi,
    I created SAP BO Explorer report on top of SAP BEx Query.
    In SAP BEx Query, Decimals were hided but when i created OLAP Universe on top that SAP BEx Query and Created Index on top of Information Space in SAP BO Explorer and then created Exploration Views. But i'm getting Decimals in my Exploration Views where as SAP BEx Query in RSRT, no decimals were appearing.
    Can anyone suggest me how to remove decimals in SAP BO Exploration Views.

    Hi Ramana,
    I am not use how you connect to SAP BEx query (Via universe or BWA or HANA)
    What I could say is BWA and HANA, you cannot adjust this
    For universe, you could try in universe layer, there is note about this
    For BWA and HANA, this function might be enhanced but you 'd better raise OSS to SAP to check with them
    Best regards
    Alex yang

  • SAP EP 6.0 SP12 Integration with SAP SRM 4.0

    Hi Buddys,
    When I am trying to create system in SAP EP for the backend SAP SRM Server using SAP Wizard in SAP EP, and testing the connection with test connection option, test is always failing.
    In system creation wizard (SAP system for dedicated application server), values for connector, user managemnet have been maintained as mentioned in How to guides for SAP EP and alias for system has been created.
    SAP EP has been installed with option to use SAP Backend SRM Server for Users.After SAP EP Installation, all SAP users in back end SAP SRM can be seen in SAP EP.
    Software versions:
    SAP EP :  EP 6.0 SP12
    SAP J2EE Engine : J2EE engine 6.4 SP13
    O/S : Windows 2003 Server
    SAP SRM : SRM 4.0 on SAP WAS 6.4
    Your help in this regard is much appreciated.
    Regards,
    Prasad

    Hi Venkat,
    When you create a system choose "SAP system using dedicated application server".
    The minimum parameters for creating the system are
    application host
    Logical System Name -
    Logon method - UIDPW
    SAP System ID
    SAP CLIENT
    SAP System Number
    server port
    System NAme
    System type - SAP_R3
    user mapping type - admin, user
    Create an alias, specify the userid and password for the system in Personalization and then do the test for the connection.
    Even then if it fails you can go to Sys Admin--> Support --> Sap Application --> SAP Transaction
    choose the system, specify the tcode, specify the gui type and hit go. If you execute the transaction code then the connection is OK.
    Hope this helps,
    Thanks,
    Praveen
    PS.Dont forget to reward points

  • Can I use export my SAP created master data in a non-SAP system?

    Hello,
    I am about to start a large integration solution with my SAP customer and they are concerned about licensing. What they want to do is export their GL, cost centre and WBS master data to an external system via integration (probably custom ABAP, or home built BAPI/RFC).  The external system then uses the accounting data to determine where to post FI or MM documents back into SAP via custom ABAP, BAPI or maybe IDOC).
    Is this OK?  Are there any licensing issues with master data used externally and posted back in via custom ABAP or standard BAPIs/IDOCs?
    Thank you in advance,
    Geoff

    Hello Geoff,
    Yes, even indirect access to SAP transactions or data needs to be licensed properly with SAP. Your customer should contact their SAP account rep to discuss the exact use case. Indirect access via certain types of certified integrations may qualify for Platform User License pricing, but there is no generic answer, and it is best for the customer to discuss their specific case directly.

  • New to SAP PI, I need more information on SAP PI Topics

    Hi Guys,
    I'm New to SAP PI, I need more information on SAP PI Topics which are related to Development and configuration.
    i have gather some information please add more topics and major scenarios if i missed out.
    SAP PI Topics:
    1.     Mapping
    u2022     Standard Functions
    u2022     User-defined Functions
    u2022     Message Mapping
    u2022     Multi-Mapping
    u2022     Java, XSLT mapping overview
    2.     Business Process Management
    u2022     BP Modeling
    u2022     BP Engine
    3.     Design and Configuration
    u2022     System Landscape Directory
    u2022     Enterprise Services Repository
    u2022     Integration Directory
    4.     Runtime
    u2022     Integration Engine
    u2022     Different installations of Adapter Engines
    u2022     Runtime Workbench / Monitoring
    u2022     Architecture
    5.     PI as Component of SAP NetWeaver
    u2022     Positioning
    6.     Overview and Basic Concepts
    u2022     Adapters & J2EE Adapter framework
    u2022     Business Process Management
    u2022     Mapping
    7.     Adapters
    8.     Technical Connectivity for communication with SAP and non-SAP systems
    u2022     File/FTP(S) (File Systems / FTP Servers)
    u2022     JDBC (RDBMS systems)
    u2022     JMS (Messaging systems, e. g. MQSeries, SonicMQ)
    u2022     SOAP (Web Services based on SOAP)
    u2022     WS-RM (Web Services based on WS Reliable Messaging)
    u2022     HTTP_AAE Adapter
    u2022     Plain HTTP(S)
    u2022     Mail (Mail Servers via SMTP, IMAP4, POP3)
    u2022     SAP Business Connector (SAP BC)
    u2022     Marketplace (SAP Marketplaces)
    9.     Application Connectivity
    u2022     RFC
    u2022     IDOC_AAE Adapter
    u2022     IDoc
    u2022     Proxy (ABAP and Java)
    10.     SAP Industry Business Packages (contain adapters and content)
    u2022     RNIF 2.0 (RosettaNet)
    u2022     RNIF 1.1 (RosettaNet)
    u2022     CIDX (RNIF 1.1)
    11.     Advanced Adapter Engine Extended u2013 AAE
    u2022     PI as Infrastructure for Service Oriented Architecture (SOA)
    SAP PI Scenarios:
    u2022     SOAP to JDBC scenario
    u2022     RFC to FILE scenario
    u2022     Multiple IDOC's to File scenario
    u2022     File to File scenario
    u2022     File to RFC scenario using BPM
    u2022     File to JDBC scenario
    u2022     Idoc to File scenario
    u2022     Abap Proxy to XI scenario
    u2022     Idoc Flatfile to Idoc XML Scenario

    You may search for all basic topics on SCN and you will get required information. Such basic questions should be searched before posting. Thread locked.
    Regards,
    Prateek Raj Srivastava

  • In sap project who get lot of oppurtunities,sap abapers or sap bw people?

    hi all
    in general sap project in sap project who get lot of oppurtunities,sap abapers or sap bw people?
    thanks,

    Hi,
    It depends on the based on the clients/customer business process & scenario's  ,& the type of SAP Projects to be implemented  .
    In Business intelligenc projects, we do require more BI Consultants compare to ABAP er's & other consultants.In ECC 6.0 & other R/3 implementaions, the demand for ABAP er's & other consultants wil be more .
    So finally the Vacancies are the part & parcel of the type SAP projects to be implemented.
    Regards
    CSM Reddy

  • In sap project who get lot of vacancies,sap abapers or sap bw people?

    hi all
    i want to know in sap project who get lot of vacancies,sap abapers or sap bw people?
    thanks

    Hi,
    It depends on the based on the clients/customer business process & scenario's  ,& the type of SAP Projects to be implemented  .
    In Business intelligenc projects, we do require more BI Consultants compare to ABAP er's & other consultants.In ECC 6.0 & other R/3 implementaions, the demand for ABAP er's & other consultants wil be more .
    So finally the Vacancies are the part & parcel of the type SAP projects to be implemented.
    Regards
    CSM Reddy

Maybe you are looking for