Sap- access problem with bex( banu,PB,edwin,ravi,voodi,oliver please answer
hi friends,
i installed netweaver trail version.
Old BEx Analyzer 3.0 is ready to use.(below link is showing)
when i run rrmx, i am not getting any thing, please help me regarding this.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/settingUpBIinNetweaver7.0ABAPTrialversion&
this netweaver will work for extraction or not.
if any one will help me ragrding this, its will be great advantage.
regards
suneel.
Hi,
What do you mean by "extraction part will work here or not" ? You mean to say that extraction from source to BW?
If you want you can have the same old flow as 3.x but the environment will be BI 7.0 then in that case you need query desinger to changer / create the queries.
Hope this helps.
PB
Similar Messages
-
We are getting the following error "there is a problem with adobe acrobat/reader. if it is running please exit and try again. (523.523)" and a gray screen appears (Image not viewable) with multiple users. We are using Adobe Reader XI (11.0.05) and (11.0.06). The current workaround is to log off the website and log back in. Once the user logs back in, the pdf will appear. However it occurs anywhere from 2-8 times in a day. Anyone else having this issue or know of another workaround? Any suggestion with how to fix? Please help!!
Hi Valerie,
Please let me know the version of Adobe Acrobat/Reader & operating system installed on your computer?
Also, try this:-
Launch Adobe Reader/Acrobat.
From the menu, choose Edit -> preferences -> General
Uncheck the option for "Enable Protected Mode at startup"
Restart the Adobe Reader and web browser.
Regards,
Aadesh -
My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.
Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!! -
After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!
Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration... -
I keep getting this message when trying to open a file.
Error: there is a problem with Adobe Acrobat/Reader If it is running, please exit and try again.I have the same problem also but solved with the solution from http://www.brain-cluster.com/blog/orange/2011/03/06/there-problem-adobe-acrobatreader-if-it-running-please-exit-and-try-again
-
error message: there is a problem with adobe acrobat reader. if it is running please exit and try again (0:104) How can I fix this?
Hi Claudio, Thanks for your assistance. I'm still confused. When I click on this site it tells me: To view this FTP site in Windows Explorer, CLICK PAGE, and then click Open FTP Site in Windows Explorer. I do not see "Page" on this list. There is a "pace"... though.
-
After installed mavericks i cannot sign in to my facetime and i messages. i tried it 100 times, but it is showing couldn't sign in check your network and try again. there is no problem with my network. if anyone knows the solution please help me .
Hi,
What version of the OS did you upgrade from ?
Anything before OS X 10.8.2 may have an issue if the Logic/Mother board has been replaced and the Serial Number not "flashed" back to it.
In the Apple Icon menu use the About this Mac item.
In the new panel click twice on the line that tells you the current OS level
It will change to the Build number (and alternative count to the OS versions) and then the Serial Number.
If it is missing you need to get it replaced.
(It is supposed to be done on Repair or Refurbishment).
An Apple Store or Apple Authorised Service Provider as the best choices.
There are apps you can download (They are Mac Model specific) but needs careful typing as it is a once only trip.
8:56 pm Sunday; November 24, 2013
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
Message was edited by: Ralph Johns (UK) -
There seems to be a problem with the file download. For troubleshooting tips, please visit our customer support page.
Thank you for the update Dlawrenceusa. I would recommend reviewing the installation logs for the updates that are failing to apply to determine the exact cause of the failure. You can find details on how to locate and interpret the installation log files at Creative Cloud Help / Troubleshoot install issues with log files | CC. You are welcome to post any specific error messages you discover to this discussion.
-
I have problem with the security questions and i dont know the answer. How i change the questions ?
See Here... ask to speak with the Account Security Team...
Apple ID: Contacting Apple for help with Apple ID account security
Or Here > Apple Support iTunes Store Contact -
IP - Various problems with BEX Analyser - help would be nice
Hi,
we use IP in combination with BEX analyser. We experience certain problems. Does anyone experienced the same issues mentioned below:
1) if a planning function is executed, it is executed twice when your cursor is within the query itself. If it is outside the query when clicking on the button, it is executed once (like it should).
2) Locking: we don't have locking problems, but from the moment two people lock each other once, they need to close their analyser and re-open it (so logon again) in order to be able to start planning again in a non-locked part. If they just change their selection (to the not-lock part) they remain locked!!!
3) planning function with multiple variables: system cannot retrieve values of all variables.
details of function:
CMD 1 EXECUTE_PLANNING_FUNCTION
PLANNING FUNCTION NAME 1 AG10_COPY01
DATA PROVIDER_FILTER 1 DATA_PROVIDER_1
VAR_NAME 1 PROF_CTR
VAR_VALUE 1 510
VAR_NAME 2 PERIOD
VAR_VALUE 2 012
VAR_NAME 3 CUSTOMER
VAR_VALUE 3 1000
-> following the instruction of the SAP course, in case of multiplle variables they should start from 0 and have an incremental increase. But the system only recognizes the variable with index = 1
regards
DDear Dries,
could it be that the variable type you use require a different set of commands?
In general the parameters of the BEx Analyzer follow the rules of the SAp BW 3.5 Webruntime. When reading this detailed documentation you find that depending on the type of variable other names have to be used, e.g. when using a selection option variable you need something line varname_low, varname_high, ...
The documentation can be found in the online-help:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/07/ff413a3ace7022e10000000a11402f/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/07/ff413a3ace7022e10000000a11402f/content.htm</a>
Best regards, Olaf Fischer -
Hi,
I have a problem with the Bex Analyzer. It is showing th details in German Language and i am not able to do anything on it.
Can anyone help me in this issue.Dear Tinkugeo,
I also faced same problem, but i Installed latest patch so i got solved my problem.
But if you are running Office 2003 then you required patch from Microsoft. that is related to frame work.
Hope this information will help you.
Thanks
Kiran Patel
SAP BI Consultant
TCS-Ahmedabad -
When the installation is done according to the documentation,
web access does not work because the scripts that add entries to
the jserv.properties file add duplicate references to
wrapper.env and wrapper.classpath. Look at the jserv.properties
file below and look at the remarked-out (#) lines of the
duplicate references. For example, look at the references to the
wrapper.env=LD_LIBRARY_PATH
Oracle, please note this bug so the web access problems are
minimized when the product is intstalled.
Thank you,
William T.
# Apache JServ Configuration
File #
################################ W A R N I N G
# Unlike normal Java properties, JServ configurations have some
important
# extensions:
# 1) commas are used as token separators
# 2) multiple definitions of the same key are concatenated in
a
# comma separated list.
# Execution parameters
# The Java Virtual Machine interpreter.
# Syntax: wrapper.bin=[filename] (String)
# Note: specify a full path if the interpreter is not visible in
your path.
wrapper.bin=/d3/Apache/jdk/bin/java
# Arguments passed to Java interpreter (optional)
# Syntax: wrapper.bin.parameters=[parameters] (String)
# Default: NONE
wrapper.bin.parameters=-Xms64m
wrapper.bin.parameters=-Xmx128m
# Apache JServ entry point class (should not be changed)
# Syntax: wrapper.class=[classname] (String)
# Default: "org.apache.jserv.JServ"
# Arguments passed to main class after the properties filename
(not used)
# Syntax: wrapper.class.parameters=[parameters] (String)
# Default: NONE
# Note: currently not used
# PATH environment value passed to the JVM
# Syntax: wrapper.path=[path] (String)
# Default: "/bin:/usr/bin:/usr/local/bin" for Unix systems
# "c:\(windows-dir);c:\(windows-system-dir)" for Win32
systems
# Notes: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters
# Under Win32 (windows-dir) and (windows-system-dir) will
be
# automatically evaluated to match your system
requirements
# CLASSPATH environment value passed to the JVM
# Syntax: wrapper.classpath=[path] (String)
# Default: NONE (Sun's JDK/JRE already have a default classpath)
# Note: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters.
JVM must be
# able to find JSDK and JServ classes and any utility
classes used by
# your servlets.
# Note: the classes you want to be automatically reloaded upon
modification
# MUST NOT be in this classpath or the classpath of the
shell
# you start the Apache from.
wrapper.classpath=/d3/Apache/jdk/lib/tools.jar
wrapper.classpath=/d3/Apache/Jserv/libexec/ApacheJServ.jar
wrapper.classpath=/d3/Apache/Jsdk/lib/jsdk.jar
# An environment name with value passed to the JVM
# Syntax: wrapper.env=[name]=[value] (String)
# Default: NONE on Unix Systems
# SystemDrive and SystemRoot with appropriate values on
Win32 systems
wrapper.env=PATH=/d3/bin
# An environment name with value copied from caller to Java
Virtual Machine
# Syntax: wrapper.env.copy=[name] (String)
# Default: NONE
# Uncomment the following lines to set the default locale and
NLS_LANG
# setting based on the environment variables.
# wrapper.env.copy=LANG
# wrapper.env.copy=NLS_LANG
# Copies all environment from caller to Java Virtual Machine
# Syntax: wrapper.env.copyall=true (boolean)
# Default: false
# Protocol used for signal handling
# Syntax: wrapper.protocol=[name] (String)
# Default: ajpv12
# General parameters
# Set the default IP address or hostname Apache JServ binds (or
listens) to.
# If you have a machine with multiple IP addresses, this address
# will be the one used. If you set the value to localhost, it
# will be resolved to the IP address configured for the locahost
# on your system (generally this is 127.0.0.1). This feature is
so
# that one can have multiple instances of Apache JServ listening
on
# the same port number, but different IP addresses on the same
machine.
# Use bindaddress=* only if you know exactly what you are doing
here,
# as it could let JServ wide open to the internet.
# You must understand that JServ has to answer only to Apache,
and should not
# be reachable by nobody but mod_jserv. So localhost is usually a
# good option. The second best choice would be an internal
network address
# (protected by a firewall) if JServ is running on another
machine than Apache.
# Ask your network admin.
# "*" may be used on boxes where some of the clients get
connected using
# "localhost"and others using another IP addr.
# Syntax: bindaddress=[ipaddress] or [localhost] or [*]
# Default: localhost
bindaddress=localhost
# Set the port Apache JServ listens to.
# Syntax: port=[1024,65535] (int)
# Default: 8007
port=8007
# Servlet Zones parameters
# List of servlet zones Apache JServ manages
# Syntax: zones=[servlet zone],[servlet zone]... (Comma
separated list of String)
# Default: NONE
zones=root
# Configuration file for each servlet zone (one per servlet zone)
# Syntax: [servlet zone name as on the zones list].properties=
[full path to configFile]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
root.properties=/d3/Apache/Jserv/etc/zone.properties
# Thread Pool parameters
# Enables or disables the use of the thread pool.
# Syntax: pool=true (boolean)
# Default: false
# WARNING: the pool has not been extensively tested and may
generate
deadlocks.
# For this reason, we advise against using this code in
production environments.
pool=false
# Indicates the number of idle threads that the pool may contain.
# Syntax: pool.capacity=(int)>0
# Default: 10
# NOTE: depending on your system load, this number should be low
for contantly
# loaded servers and should be increased depending on load
bursts.
pool.capacity=10
# Indicates the pool controller that should be used to control
the
# level of the recycled threads.
# Syntax: pool.controller=[full class of controller] (String)
# Default: org.apache.java.recycle.DefaultController
# NOTE: it is safe to leave this unchanged unless special
recycle behavior
# is needed. Look at the "org.apache.java.recycle" package
javadocs for more
# info on other pool controllers and their behavior.
pool.controller=org.apache.java.recycle.DefaultController
# Security parameters
# Enable/disable the execution of org.apache.jserv.JServ as a
servlet.
# This is disabled by default because it may give informations
that should
# be restricted.
# Note that the execution of Apache JServ as a servlet is
filtered by the web
# server modules by default so that both sides should be enabled
to let this
# service work.
# This service is useful for installation and configuration
since it gives
# feedback about the exact configurations Apache JServ is using,
but it should
# be disabled when both installation and configuration processes
are done.
# Syntax: security.selfservlet=true (boolean)
# Default: false
# WARNING: disable this in a production environment since may
give reserved
# information to untrusted users.
security.selfservlet=true
# Set the maximum number of socket connections Apache JServ may
handle
# simultaneously. Make sure your operating environment has
enough file
# descriptors to allow this number.
# Syntax: security.maxConnections=(int)>1
# Default: 50
security.maxConnections=50
# Backlog setting for very fine performance tunning of JServ.
# Unless you are familiar to sockets leave this value commented
out.
# security.backlog=5
# List of IP addresses allowed to connect to Apache JServ. This
is a first
# security filtering to reject possibly unsecure connections and
avoid the
# overhead of connection authentication.
# <warning>
# (please don't use the following one unless you know what you
are doing :
# security.allowedAddresses=DISABLED
# allows connections on JServ'port from entire internet.)
# You do need only to allow YOUR Apache to talk to JServ.
# </warning>
# Default: 127.0.0.1
# Syntax: security.allowedAddresses=[IP address],[IP Address]...
(Comma
separated list of IP addresses)
#security.allowedAddresses=127.0.0.1
# Enable/disable connection authentication.
# NOTE: unauthenticated connections are a little faster since
authentication
# handshake is not performed at connection creation.
# WARNING: authentication is disabled by default because we
believe that
# connection restriction from all IP addresses but localhost
reduces your
# time to get Apache JServ to run. If you allow other addresses
to connect and
# you don't trust it, you should enable authentication to
prevent untrusted
# execution of your servlets. Beware: if authentication is
disabled and the
# IP address is allowed, everyone on that machine can execute
your servlets!
# Syntax: security.authentication=[true,false] (boolean)
# Default: true
security.authentication=false
# Authentication secret key.
# The secret key is passed as a file that must be kept secure
and must
# be exactly the same of those used by clients to authenticate
themselves.
# Syntax: security.secretKey=[secret key path and filename]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
#security.secretKey=./etc/jserv.secret.key
# Length of the randomly generated challenge string (in bytes)
used to
# authenticate connections. 5 is the lowest possible choice to
force a safe
# level of security and reduce connection creation overhead.
# Syntax: security.challengeSize=(int)>5
# Default: 5
#security.challengeSize=5
# Logging parameters
# Enable/disable Apache JServ logging.
# WARNING: logging is a very expensive operation in terms of
performance. You
# should reduced the generated log to a minumum or even disable
it if fast
# execution is an issue. Note that if all log channels (see
below) are
# enabled, the log may become really big since each servlet
request may
# generate many Kb of log. Some log channels are mainly for
debugging
# purposes and should be disabled in a production environment.
# Syntax: log=[true,false] (boolean)
# Default: true
log=true
# Set the name of the trace/log file. To avoid possible
confusion about
# the location of this file, an absolute pathname is recommended.
# This log file is different than the log file that is in the
# jserv.conf file. This is the log file for the Java portion of
Apache
# JServ.
# On Unix, this file must have write permissions by the owner of
the JVM
# process. In other words, if you are running Apache JServ in
manual mode
# and Apache is running as user nobody, then the file must have
its
# permissions set so that that user can write to it.
# Syntax: log.file=[log path and filename] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
log.file=/d3/Apache/Jserv/logs/jserv.log
# Enable the timestamp before the log message
# Syntax: log.timestamp=[true,false] (boolean)
# Default: true
log.timestamp=true
# Use the given string as a data format
# (see java.text.SimpleDateFormat for the list of options)
# Syntax: log.dateFormat=(String)
# Default: [dd/MM/yyyy HH:mm:ss:SSS zz]
log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz]
# Since all the messages logged are processed by a thread
running with
# minimum priority, it's of vital importance that this thread
gets a chance
# to run once in a while. If it doesn't, the log queue overflow
occurs,
# usually resulting in the OutOfMemoryError.
# To prevent this from happening, two parameters are used:
log.queue.maxage
# and log.queue.maxsize. The former defines the maximum time for
the logged
# message to stay in the queue, the latter defines maximum
number of
# messages in the queue.
# If one of those conditions becomes true (age > maxage || size
maxsize),# the log message stating that fact is generated and the log
queue is
# flushed in the separate thread.
# If you ever see such a message, either your system doesn't
live up to its
# expectations or you have a runaway loop (probably, but not
necessarily,
# generating a lot of log messages).
# WARNING: Default values are lousy, you probably want to tweak
them and
# report the results back to the development team.
# Syntax: log.queue.maxage = [milliseconds]
# Default: 5000
log.queue.maxage = 5000
# Syntax: log.queue.maxsize = [integer]
# Default: 1000
log.queue.maxsize = 1000
# Enable/disable logging the channel name
# Default: false
# log.channel=false
# Enable/disable channels, each logging different actions.
# Syntax: log.channel.[channel name]=[true,false] (boolean)
# Default: false
# Info channel - quite a lot of informational messages
# hopefully you don't need them under normal circumstances
# log.channel.info=true
# Servlets exception, i.e. exception caught during
# servlet.service() processing are monitored here
# you probably want to have this one switched on
log.channel.servletException=true
# JServ exception, caught internally in jserv
# we suggest to leave it on
log.channel.jservException=true
# Warning channel, it catches all the important
# messages that don't cause JServ to stop, leave it on
log.channel.warning=true
# Servlet log
# All messages logged by servlets. Probably you want
# this one to be switched on.
log.channel.servletLog=true
# Critical errors
# Messages produced by critical events causing jserv to stop
log.channel.critical=true
# Debug channel
# Only for internal debugging purposes
# log.channel.debug=true
#wrapper.classpath=/d3/ord/jlib/ordim.zip
#wrapper.classpath=/d3/ord/jlib/ordhttp.zip
# Oracle XSQL Servlet
wrapper.classpath=/d3/lib/oraclexsql.jar
# Oracle JDBC
wrapper.classpath=/d3/jdbc/lib/classes12.zip
# Oracle XML Parser V2 (with XSLT Engine)
wrapper.classpath=/d3/lib/xmlparserv2.jar
# Oracle XML SQL Components for Java
wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
# XSQLConfig.xml File location
wrapper.classpath=/d3/xdk/admin
# Oracle BC4J
wrapper.classpath=/d3/ord/jlib/ordim.zip
wrapper.classpath=/d3/ord/jlib/ordvir.zip
wrapper.classpath=/d3/ord/jlib/ordhttp.zip
wrapper.classpath=/d3/BC4J/lib/jndi.jar
wrapper.classpath=/d3/BC4J/lib/jbomt.zip
wrapper.classpath=/d3/BC4J/lib/javax_ejb.zip
wrapper.classpath=/d3/BC4J/lib/jdev-rt.jar
wrapper.classpath=/d3/BC4J/lib/jbohtml.zip
wrapper.classpath=/d3/BC4J/lib/jboremote.zip
wrapper.classpath=/d3/BC4J/lib/jdev-cm.jar
wrapper.classpath=/d3/BC4J/lib/jbodomorcl.zip
wrapper.classpath=/d3/BC4J/lib/jboimdomains.zip
wrapper.classpath=/d3/BC4J/lib/collections.jar
wrapper.classpath=/d3/Apache/Apache/htdocs/onlineorders_html
#wrapper.classpath=/d3/Apache/Apache/htdocs/OnlineOrders_html/Onl
ineOrders.jar
# The following classpath entries are necessary for EJBs to run
in IAS or DB when
present
wrapper.classpath=/d3/lib/aurora_client.jar
wrapper.classpath=/d3/lib/vbjorb.jar
wrapper.classpath=/d3/lib/vbjapp.jar
# Oracle Servlet
wrapper.classpath=/d3/lib/servlet.jar
# Oracle Java Server Pages
wrapper.classpath=/d3/jsp/lib/ojsp.jar
# Oracle Util
wrapper.classpath=/d3/jsp/lib/ojsputil.jar
# Oracle Java SQL
wrapper.classpath=/d3/sqlj/lib/translator.zip
# Oracle JDBC
#wrapper.classpath=/d3/jdbc/lib/classes12.zip
# SQLJ runtime
wrapper.classpath=/d3/sqlj/lib/runtime12.zip
# Oracle Messaging
wrapper.classpath=/d3/rdbms/jlib/aqapi.jar
wrapper.classpath=/d3/rdbms/jlib/jmscommon.jar
# OJSP environment settings
#wrapper.env=ORACLE_HOME=/d3
# The next line should be modified to reflect the value of the
SID for your
webserver.
#wrapper.env=ORACLE_SID=cmpdb
#wrapper.env=LD_LIBRARY_PATH=/d3/lib
## Enable the flag below if you are using jdk 1.2.2_05a or above
#wrapper.env=JAVA_COMPILER=NONE
# Advanced Queuing - AQXML
wrapper.classpath=/d3/rdbms/jlib/aqxml.jar
#wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/lib/xschema.jar
#wrapper.classpath=/d3/jlib/jndi.jar
wrapper.classpath=/d3/jlib/jta.jar
oemreporting.properties=/d3/Apache/Jserv/oemreporting/oemreportin
g.properties
zones = root, oemreporting
wrapper.classpath=/d3/jlib/share-opt-1_1_9.zip
wrapper.classpath=/d3/jlib/caboshare-opt-1_0_3.zip
wrapper.classpath=/d3/jlib/marlin-opt-1_0_7.zip
wrapper.classpath=/d3/jlib/tecate-opt-1_0_4.zip
wrapper.classpath=/d3/jlib/ocelot-opt-1_0_2.zip
wrapper.classpath=/d3/jlib/regexp.jar
wrapper.classpath=/d3/jlib/sax2.jar
#wrapper.classpath=/d3/jlib/servlet.jar
wrapper.bin.parameters= -DORACLE_HOME=/d3
#wrapper.env=LD_LIBRARY_PATH=/d3/lib32
wrapper.env.copy=DISPLAY
wrapper.bin.parameters=-DORACLE_HOME=/d3
#wrapper.classpath=/d3/lib/vbjorb.jar
#wrapper.classpath=/d3/lib/vbjapp.jar
wrapper.classpath=/d3/classes/classesFromIDLVisi
wrapper.classpath=/d3/jlib/swingall-1_1_1.jar
wrapper.classpath=/d3/jlib/ewtcompat3_3_15.jar
wrapper.classpath=/d3/jlib/ewt-3_3_18.jar
wrapper.classpath=/d3/jlib/share-1_1_9.jar
wrapper.classpath=/d3/jlib/help-3_2_9.jar
wrapper.classpath=/d3/jlib/ice-5_06_3.jar
wrapper.classpath=/d3/jdbc/lib/classes111.zip
wrapper.classpath=/d3/classes
wrapper.classpath=/d3/jlib/oembase-9_0_1.jar
wrapper.classpath=/d3/jlib/oemtools-9_0_1.jar
wrapper.classpath=/d3/jlib
wrapper.classpath=/d3/jlib/javax-ssl-1_1.jar
wrapper.classpath=/d3/jlib/jssl-1_1.jar
wrapper.classpath=/d3/jlib/netcfg.jar
wrapper.classpath=/d3/jlib/dbui-2_1_2.jar
#wrapper.classpath=/d3/lib/aurora_client.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/network/jlib/netmgrm.jar
wrapper.classpath=/d3/network/jlib/netmgr.jar
wrapper.classpath=/d3/network/tools
wrapper.classpath=/d3/jlib/kodiak-1_2_1.jar
wrapper.classpath=/d3/sysman/jlib/netchart360.jar
wrapper.classpath=/d3/jlib/pfjbean.jar
wrapper.env=SHLIB_PATH=/d3/lib32
wrapper.env=LIBPATH=/d3/lib32
wrapper.classpath=/d3/ultrasearch/lib/isearch_midtier.jar
wrapper.classpath=/d3/ultrasearch/lib/isearch_query.jar
wrapper.classpath=/d3/ultrasearch/lib/jgl3.1.0.jar
wrapper.classpath=/d3/lib/mail.jar
wrapper.classpath=/d3/lib/activation.jar
wrapper.classpath=/d3/ultrasearch/jsp/admin/config
# Additions for iFS
## DO NOT REMOVE OR ALTER THE FOLLOWING LINE ....
# iFS true
# Uncomment if you want to use the same Jserv as other
applications
wrapper.classpath=/d3/9ifs/custom_classes
wrapper.classpath=/d3/9ifs/settings
wrapper.classpath=/d3/9ifs/lib/adk.jar
wrapper.classpath=/d3/9ifs/lib/email.jar
wrapper.classpath=/d3/9ifs/lib/http.jar
wrapper.classpath=/d3/9ifs/lib/release.jar
wrapper.classpath=/d3/9ifs/lib/repos.jar
wrapper.classpath=/d3/9ifs/lib/utils.jar
wrapper.classpath=/d3/9ifs/lib/webui.jar
wrapper.classpath=/d3/9ifs/lib/provider.jar
wrapper.classpath=/d3/jlib/javax-ssl-1_2.jar
wrapper.classpath=/d3/jlib/jssl-1_2.jar
wrapper.env=ORACLE_HOME=/d3
wrapper.env=ORACLE_SID=cmpdb
wrapper.env=LD_LIBRARY_PATH=/d3/lib:/d3/ctx/lib:/d3/lib32
wrapper.env=NLS_LANG=.US7ASCII
## Additions for the iFS zone
# Uncomment if you want to use the same Jserv as other
applications
zones=ifs
ifs.properties=/d3/Apache/Jserv/etc/ifs.properties
# End iFS sectionAbout your home page; Manually set up Firefox with the window(s) and tab(s)
the way you want them to be. Then;
'''''Firefox Options > General > Homepage'''''.
Press the button labeled ''''Use Current'''.'
=====================================
Open a new window or tab. In the address bar, type '''''about:config'''''.
If a warning screen comes up, press the '''''Be Careful''''' button.
This is where Firefox finds information it needs to run.
At the top of the screen is a search bar. Enter '''''browser.newtab.url'''''
and press enter. '''''browser.newtab.url'''''
tells Firefox what to show when a new tab is opened.
If you want, right click and select '''''Modify'''''. You can change the
setting to;<BR><BR>about:home (Firefox default home page),<BR>
about:newtab (shows the sites most visited),<BR>
about:blank (a blank page),<BR>
or you can enter any web page you want.<BR><BR>
The same instructions are used for the new window setting, listed as
'''''browser.startup.homepage'''''. -
SAP BW : Problem with precalculation job on WebTemplate depending on user
Hi experts,
We have a problem with the precalculation job on WebTemplate. When we schedule this job with a specific user, the job run normally and precalculation is done on step 3 :
Step 003 started (program RSRA_JOB, variant , user ID E0126831)
Start package ZBWP_SCHEDULE_TEMPLATE
- Start setting ZBWP_WAD_001 with variant -
Precalculation: initialization started
Precalculation: processing started
Precalculate data (fill DataStore)
Processing data provider DATAPROVIDER_1, query ZBWP_IS01_001
Processing data provider DATAPROVIDER_10, query ZBWPM_016
Processing data provider DATAPROVIDER_11, query ZBWPM_016
But when we change the user to a technical user (like BATCH or ALEREMOTE which have the profile SAP ALL ), the job don't do any precalculation in step 3 :
Step 003 started (program RSRA_JOB, variant , user ID ALEREMOTE)
Start package ZBWP_SCHEDULE_TEMPLATE
- Start setting ZBWP_WAD_001 with variant -
Implementing settings finished
Did you have an idea for this problem ?
Thanks in advance for your response.
Regards,
MathieuHi,
Try to trace the log files in RSRD_LOG and also check files in C:TEMP.The precal server trace files will be stored in the subdirectory of C:TEMPBWAnalyzer .
for more information look in belwo blog
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30e3d697-4ca0-2c10-4b81-c474b1490064?quicklink=index&overridelayout=true
Thanks -
Write access problem with external Storage Device Connected to macbook
Hi All,
I have write access problem ( gives only read-access, but no write access) with an external HDD device (NTFS formatted ) connected to my macbook.
Could anyone suggest me a file system ( apart from FAT32) which is compatiable with both Mac OS as well windows ;also this file system should allow me to create partitions of size more than 100 GB
(My external storade devcie capacity is 500 GB )
Thanks
NelsonHi Nelson,
simply said there is no such file system.
Regardless what you choose, only FAT32 is fully read-/writeable from both Mac OSX and Windows.
Third-Party helper for access to certain file systems are:
MacDrive (for Windows using HFS+, the OSX file system)
MacFuse with 3G (for fully usage of NTFS in OSX)
Paragon NTFS for OSX (also for fully usage of NTFS in OSX)
Only MacFuse is freeware, the other two are Commercial apps.
And just in case you are thinking of any Linux file system, like Ext3 or ReiserFS, you will at least need driver for Windows if not also for OSX (not sure about that).
Regards
Stefan -
Problem with BEx Web Application Designer
Hi,
we use since last week the Web Application Designer with the SAP GUI 7.2.
Now I have a big problem since last week. I can call existing templates but unfortunately not change! I make a change in the template and save it. When I viewed the template again but no change is saved!
A new template I can create and change
Does anyone know the problem? The behavior also occurs with the old Gui 7.1.
Regards
Edited by: Jana VOGL on Oct 18, 2010 10:14 AMHi Jana,
Do you get any error before opening of an existing template in WAD? Doesn't look to be a problem with the different SAP GUI versions. Maybe somethings gone wrong with the Java - ABAP config settings or Java Portal communication settings. Maybe you should check with your BASIS team on the same. Tell them what the problem is & they will run a trace to figure out.
--Priya
Maybe you are looking for
-
How do you suppress page numbers. I am trying to print a screenplay for the first time since switching to Pages and I can't suppress Page #1 without making the rest of the pages inaccurate, as page #1 is the Title Page. Does anyone have any suggestio
-
Hi, Can some one tell how it works the payment terms and discount. I have one Payment Term with 30 days, 3% Discount, 60 days 1% discount 90 days not discount. When I book and invoice say on 20th-Apr-09 and gives baseline date same as invoice date as
-
What is the item"140" in toolbar customize window??
in the customize toolbar window is the number 140...what is this for and what does it do??
-
Exporting Versions sends master and version files
For some reason when I try to export versions of my photos instead of exporting just the versions aperture sends both the master and the version. Any ideas of how this can be avoided? Do I have something wrong in a preset or preference?
-
I tried to set-up a CDN endpoint over a storage account last night and kept getting 404. suspecting that this is just time to propagate I called it a day. This morning when I went to look again - my CDN endpoint was not visible in the portal and ins