SAP* activation

Sap NW200s SR2 installation document says at client copy stage:
Activate kernel user SAP*:
a) Set the profile parameter login/no_automatic_user_sapstar to 0.
In 001 client I must activate SAP* for client 100 (Copied from 001 Client)
How can I do that? (RZ10? How)
Thanks

Helo Cemil,
The parameter login/no_automatic_user_sapstar is NOT client specific, logon to any client with appropriate authorization.
*Execute transaction RZ10
*Choose DEFAULT profile & edit the profile in 'Extended mode'
Find the parameter login/no_automatic_user_sapstar, add if not found.
Copy & save the parameter list
Activate the DEFAULT profile
**Remember login/no_automatic_user_sapstar is NOT a dynamic parameter and requires a SAP system restart for it to take effect.
Regards,
Ammey Kesarkar

Similar Messages

SAP* Activated but SuperAdmin can not logon

Hi there,
After EP60.2 SP4 default installation, (HP-UX/Oracle9i), SAP*/06071992 can not logon a instructed, even the SAPUM.log shows:
Aug 30, 2004 7:25:14 AM | Warning | SAP* | LOGIN.OK | USERACCOUNT =
UACC.SUPERUSER_DATASOURCE.SAPASTERISK | | IP Address=[useripaddress]
Any solution?
Regards,
AAAttar

Hi all
Based on : "When using SAP*/06071992, the screen and the form refreshes, nothing happens. if I choose diffirent password, I got msg.:
User authentication failed"
somtehing must go wrong with the dynamic session cookie used by portal.
I suggest u check cookie handling on your browser (by the way which one is it ?)
Cookie handling can also be affected by your client os (XP, 2k, 98...) so i suggest some testing on other clients.
Note : I experienced similar pb and found out ultimately that IE6 stops handling dynamic cookies URL contains unsupported DNS characters (like underscores...)
good luck
Frank

Follow SAP Active Global Support on Twitter

Dear all,
DID YOU KNOW? There is a new SAP Primary Support TWITTER Channel where you can see the latest news and highlights of SAP AGS Primary Support
http://www.twitter.com/SAP_Gsupport
You may want to visit these blogs:
SAP Primary Support Twitter channel
SAP Primary Support Twitter Channel (Part 2)
For Controlling tweets, these hashtags are available:
Knowledge base Articles #SAP_KBA_CO
Note     #SAP_NOTE_CO
Hot New     #SAP_NEW_CO
Blog     #SAP_BLOG_CO
Hope you will find them useful!
Kind regards
Maria Luisa
Edited by: Maria Luisa Munoz on Dec 16, 2011 1:42 PM

http://service.sap.com/message
(on the left side)
--> speed up processing
(and/or check Note 560499 - Global Support Customer Interaction: Telephone/fax/e-mail)
Markus

Error while running SAP HR activ sync

Hi Geeks,
Got this issue while I run my SAP Active sync.
"Caused by: com.sap.mw.idoc.IDoc$Exception: (8) IDOC_ERROR_INITIALIZATION: Could not initialize SAP Java Connector IDoc Class Library. Found SAP Java Connector version 2.1.6 but version 2.1.8 or a higher patch level is required."
I have SAPJco 2.1.6 in my class path and the Sap Idoc is of 2.1.8 but I am not able to find the earlier version of sap idoc jars in serverice.sap.com.
Let me know ur thoughts on the same.
Regards
Jeyanth

Hi Choon,
First of all do you have the installation guide on you, if not please get one from the marketplace. The one I have suggests the following at the end of installation -
Since we are installing IDES, I am told just click retry once more (you will get the error again), and
then click OK to end the installation. This is valid for SAP R/3 4.7 ext.1.
See if this removes the error you are getting, please awards points if you succeed, and let me know.
Thanks,
kind regards,
M. Nizam

MS Active Directory (LDAP) and SAP Integration

Hi all!
don't know if I'm right here in this forum, but:
I'm using MS Windows Server 2003 and installed Active Directory as LDAP-System on the one hand side, on the other I'm using a 6.20 ABAP Web AS.
I'd like to synchronize the User Storage on these two systems.
Does anyone have experience in doing this? I'm facing a tricky exception in depth of my customizing too complex to explain right now. The problem concerns the mapping of LDAP-Fields and SAP-Fields.
Thankx,
Christoph

Hi Christoph,
This is the mySAP ERP forum. Perhaps you can post your question in the Web AS forum (SAP NetWeaver Application Server).
For now: here is a link to a video regarding SAP Active Directory integration:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/sap active directory integration,%20SSO%20and%20User%20Management%20Webinar.wrf
I found it by searching on Active Directory here on sdn:
https://www.sdn.sap.com/sdn/search.sdn?contenttype=url&content=/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fSDN!2fiViews!2fFramework!2fcom.sap.sdn.advsearch%3Fprttheme%3DCSIN%26QueryString=active%20directory%26searchDatasource=SDNContent
Cheers,
Noel

PPPI - Process Management - activating standard settings from SAP

System data ECC 5.0
I am trying to use process message category PI_ORDCO. The destination is not assigned. I think the destination should be PI14. PI14 is not listed in the dropdown list.
My guess is the system does not have the current standard settings from SAP "activated". Please help with activating SAP predefined destinations, characteristics, categories, instructions, etc.
Thanks.
(moved by to what I hope is the appropriate forum to get an answer to this)
Message was edited by: Marilyn Pratt

Hi
Please try this ->
http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/bb/6c0e3b02616a42e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/62/fb7d3cb7f58910e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/5e/88ef3bc8821d0de10000000a114084/frameset.htm
Regards
- Atul

SAp standard Activity profile for shipment.

Hi Expert,
I am working on transortation module.
WE have requirmrnt that in shipment creation measn vt01n transaction when user will tick the shipment status that is shipment start,shipment loading......etc. automatic PGI happend or automatic billing document created in background.
for this as per my knowledge SAP activity profile is the solution but no idea.
Can someone help me & help me to clear my view.
Thanks in Advance.
Dev

Hi
Thanks for your reply.
I know the path , but I want what is activity profile?
Which activity profile have to use for PGI & which for Billing document.?
Please suggest or send me any document which provide me a complete set of information.
Thanks & reply ASAP.
Dev

Migrating an SAP 4.7x110 system on W2003 32-bit to a 64-bit host (x86_64)

We want to migrate an SAP 4.7x110 system on Windows Server 2003 32-bit to a 64-bit host (x86_64). Afterwards we want to upgrade the system to ECC 6.0.
According to PAM, 4.7x110 is not supported on Windows 64-bit.
According to note 960769,
"After the migration to the 64-bit hardware, your SAP system may have a status that is not supported by SAP for productive use (see Note 814834). You may need to upgrade to a new SAP release. In this exceptional circumstance, SAP offers support for the duration of the upgrade. Note that SAP does not support a longer, more productive use of such a system for the period after the migration and before the upgrade....
...We generally recommend to use SQL Server 2005 (64-bit) for the productive use on x86_64. However, the 32-bit operation of SQL Server 2000 on Windows x86_64 64-Bit (supported by Microsoft) is also supported by SAP...
...The following table illustrates which OS/DB combination supports each SAP release in the target system.
Source System   Target System (Kernel, DB Software)     Support Comment
3.1I   3.1I 32-bit, MSSQL 2000 32-bit    only for upgrade (a,c)
4.0B   4.0B 32-bit, MSSQL 2000 32-bit    only for upgrade (c)
4.5B    4.5B 32-bit, MSSQL 2000 32-bit    only for upgrade (c)
4.6C   4.6D 32-bit, MSSQL 2005 64-bit     productive (b)
620   640 64-bit, MSSQL 2005 64-bit    productive (b)
640   640 64-bit, MSSQL 2005 64-bit    productive (b)
700   700 64-bit, MSSQL 2005 64-bit    productive (b) "
According to note 814834,
"SAP supports the x86_64 platform on Windows 2003 Server SP1 x64 for kernel 4.6D and kernel 6.40 and higher. ... For product versions based on kernel 6.40 and higher, only 64-bit operation is supported."
According to note 905634, about SQL Server 2005 support (where a mention to R3E 4.7 x110 is missing)
"Supported SAP products based on SAP_BASIS 6.20 and SAP_BASIS 6.40
Product Windows platforms
BW 3.10 x86, IA-64
SCM 4.0 x86, IA-64
EBP/CRM 4.0 x86, IA-64
ECC 5.0 SR1 x86, IA-64, x64
NetWeaver'04 SR1 x86, IA-64, x64
SCM 4.1 x86, IA-64, x64
SRM 4.0 SR1 x86, IA-64, x64
CRM 4.0 SR1 x86, IA-64, x64
R3E 4.7 x200 SR1 x86, IA-64, x64
SolMan 3.2 SR1 x86, IA-64, x64 "
+//////////////////////+//
According to all this information, may I move our 4.7x110 system onto a Windows Server 2003 SP1 64-bit, SQL Server 2005 64-bit, and after that we would upgrade to ECC 6.0?
Thanks !!!
Eva
Edited by: Eva Verdaguer on Jul 25, 2008 12:41 PM

Sorry, I forgot posting the SAP answer, which is also "Yes":
30.07.2008 - 16:19:00 CET - Respuesta by SAP
Dear Eva,
Yes, you can move to the 64 bit platform with SQL Server 2005 according
to note 960769.
Information in note 905634 means there is no installation DVD for
release 47x110 for SQL Server 2005. So it is not possible to do a fresh
installation of 47x110 except if you follow the workaround of note
899111 (for x64).
Best Regards,
Manuel García Guardiola
SAP Active Global Support - Netweaver Web Application Server
****************************************************************+
Thanks very much for your message, anyway.
Regards !!
Eva

Approver not determined process controlled workflow in SAP SRM 7.0

Hello all,
I have setup process controlled workflow in SAP SRM 7.0 EHP3 for shopping cart approval.
I have 4 approval levels.
I have used item-based Decision for entire document because for some items i want system approval.
In implementation of BADI /SAPSRM/BD_WF_RESP_RESOLVER, in the method /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_AREA_TO_ITEM_MAP, i am skipping the items for which i want system approval.
Also in method /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_APPROVERS_BY_AREA_GUID of BADI implementation class, i am keeping the approver table empty for the step which i want system approval.
For example i have 1 item in shopping cart and for 1st step, based on some accouting criteria, i want system approval for 1st level and the workitem should go directly to 2 approval step when shopping cart is ordered. This is not happening.
But if i have multiple items, and one item should have system approval based on some criteria and the 1st approval level should be system approval and other item should go to the 1st approver. This is happening and showing 'system' approver for item1 and 'appr_xyz' for item 2.
For shopping cart having only 1 item, If i approve the shopping cart in this state only, it doesn't go to any approver and is not usable.
am i missing anything in BADI /SAPSRM/BD_WF_RESP_RESOLVER??
Please let me know.
Regards,
Yayati Ekbote

Hi Adrian,
Yes it is possible to display custom workflows in the Universal Worklist, However, I am not sure what you are trying to do with a routing table. If the workitems are of type decision, you can use UserDecisionHandler (action handler) configured in the XML file to use the Approve/Reject functionality - we are talking about webflow connector here correct? R/3 connector?
Regards,
Beth Maben
EP - Senior Support Consultant II
SAP Active Global Support
Global Support Centre Ireland
**SDN Forum Moderator:
SAP Enterprise Portal: Application Integration
**SDN Universal Worklist Wiki:
http://wiki.sdn.sap.com/wiki/x/ehU

Sap Crystal Report Max Print Exception

In Sap Crystal Report after 60 to 70 reports print report doesn't show. When I set registry value of PrintJobLimit from c# code then exception fire "User can't authorize or permit for edit".

Hi Adnan,
You have mentioned two issues here.
1. In Sap Crystal Report after 60 to 70 reports print report doesn't show
2. When I set registry value of PrintJobLimit from c# code then exception fire "User can't authorize or permit for edit".
The second is issue is likely your attempt to resolve the first.
As Don has mentioned the first issue is a resourcing issue.
Make sure you close, dispose report object to free the memory.
Try setting the printjoblimit registry key manually to some definite no... 200, 300 etc. see if it works,
Also when you say the report doesnt work, is there an error / exception thrown by the app?
Does this happen to a specific printer?
- Bhushan
Senior Engineer
SAP Active Global Support
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Getting started and moving ahead with Crystal Reports .NET applications.

SAP - LDAP synchronization doubt

I have setup SAP - LDAP synchronization on WebAS 6.20 with Active Directory on W2k3. The mappings are default what SAP suggested me along with its standard schema extensions. When I run the RSLDAPSYNC_USERS, I m faced with 2 problems here,
1) I have selected When users exists both in AD and DB it should compare the timestamp and update the values accordingly. If user doesn't exist in Active Directory then Create it .
For this I created a user JLIN ( Jason Lin )in both active directory (created manually from AD - MMC ) and SAP using SU01.
On sync it throws error :
Type
Message text
Connection created to server MSAD
Number of Objects in Directory 0
Number of Objects in Database 1
Objects that Exist Both in the Directory and in the Database: 0
Successfully Bidirectionally Updated: 0
Updated Successfully in Database: 0
Successfully Updated in Directory: 0
Cannot Update: 0
No Synchronization Necessary: 0
Objects that Only Exist in the Directory: 0
Ignored: 0
Objects that Only Exist in the Database: 1
| |Entry already exists |
LDAP_CREATE failed
Error while writing object JLIN to the directory 
Successfully Created in Directory: 0
Cannot Create in Directory: 1
Total Time Required: 00:00:00
Connection to server MSAD terminated
This means that it is not able to recognize the user JLin in Active Directory as the same user as JLin in SAP. Any idea what could I be doing wrong ? When the user is created in by SAP into AD ( i.e. if jlin did not exists ) the sync etc happens perfectly well . Any pointers on this ?
2 ) On the other hand, we have 2 sets of users to be synchronized, one in active directory and the other in SAP. Since these systems are governed by different sets of userid policies the userid for a user in Active directory may not be same as that of SAP. So we need to map these userids for synchronization. is there a way to specify in SAP / Active directory which Active Directory / SAP user they map to ?
What we want to achieve is When a user is deleted / disabled from active directory he should be deleted / disable in SAP too.
Message was edited by: Harsh Busa

Figured out that SAP uses sapUsername attribute in Active directory user object
Harsh

Automatically Pass Parameters From Crystal To SAP B1

So, I've searched extensively, and haven't been able to find an answer to my unique issue.
This question pertains to linking a Crystal Report by parameter values to the OWOR table in SAP B1, and automatically passing those parameter values from the active record in SAP. Several other tables are used in sql joins, but the report is generated from an OWOR production order. I should start by stating that the report works great when manually populating the parameter fields when SAP calls for them.
Overview:
I've written a report in Crystal that contains several sub reports, some of which are looking to the DocEntry field as the parameter (DocKey@) and others that do not look to the DocEntry field at all - but rather use another field on the form to pull up information that spans more than just that one production order. I've chosen to upload as a layout in SAP (as that is all I've worked with up to this point, and it seems it needs to be to automate from a production order); but as I continue to research, it appears DocKey@ is mandatory when uploading as a layout, and in order to view the report from the actively selected production order, it must be a layout. Does that mean the parameter is required in all sub reports? Is it required in any sub report?
I have two main issues that I need to hurdle for this report to work how I would like it to:
1. Three of the eight Commands (one main command and seven sub-report commands) use the DocKey@ as the parameter to pass from SAP back to Crystal. The main report command, as well as four of the sub reports/commands are looking to another field in the OWOR record - which happens to be a re-seller defined field (UDF). For all intensive purposes, let's call this field BatchID. I'm assuming the sub report commands run in succession, one after the next. The reason I need to use BatchID as the parameter to pull from the record, rather than DocEntry, is there are other records that contain the same BatchID, and I want all of the info pertaining to that BatchID to populate on the report.
Q1: The first command containing DocKey@ is automatically populated by SAP, and the user does not have to key that one in. However, the next two DocKey@ parameters do not automatically populate, and the user is asked for those values. How can I fix this?
Q2: How can I automate the passing of BatchID so the user does not have to fill it in 5 times when they wish to preview the report(layout)? Can I link ObjectID@ to any field in OWOR? Is there any other way like creating a stored procedure or something , to automate the passing of that variable from the SAP active record to the crystal report - so the user doesn't have to key it in several times just to pull up the report?
Thank you so much for even reading, let alone helping me with this issue!!
Cheers,
Nick

 Hi
 I had the same problem. Take a look at this newsgroup article on the businessobjects
 website :
 http://support.businessobjects.com/library/kbase/articles/c2015264.asp
 Grieg
 "Rada Pickens" <[email protected]> wrote:
 >
 >Hi,
 >
 >I'm getting the same error message, I was wondering if you fixed the
 >problem.
 > I'm stumped, can you help?
 >
 >Rada
 >
 >
 >"JAI" <[email protected]> wrote:
 >>
 >>I am passing parameters, from the JSP page to Crystal Report, i took
 >>the code from
 >>the below mentioned url, i dont know, it is something wrong with the
 >>jsp page
 >>or crystal report.
 >>i have created parameter field in crystal report to receive the value
 >>from the
 >>jsp page.
 >>If u r not clear with the error, please reply to me.
 >>
 >>i took the code from the below mentioned page
 >>
 >>reference page:
 >>----------------------
 >>http://dev2dev.bea.com/trainingevents/webinars/012804_faq.jsp
 >>parameterFieldsViewReport.jsp
 >>
 >>
 >>error displaying in the jsp page
 >>-----------------------------------
 >>com.crystaldecisions.report.web.viewer.CrystalReportViewer
 >>Some parameters are missing values
 >

SAP Pricing

Dear All,
There is a pricing condition in pricing.
we maintain vaildty for it.
Lets say if the validity expires or if the document is complete it should not reflect.
Example: Rebate arrangment has been settled and then also it is appearing in PO.

Dear Amey,
Could you please clarify your issue?
Also, please take a look in following documentation about pricing:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d09867e7-84d7-2c10-b9b7-da9e3b41392a&overridelayout=true
This is a documentation from our Wiki, and should be helpful.
Thank you in advance!
Best regards,
Eduardo Junior
Support Consultant MM
SAP Active Global Support

SAP POS 2.0

Hello everyone,
I need to download SAP POS 2.0 (Point-Of-Sale) and I can't find it in the Marketplace. Where I can download this software?
Thanks,
Christian

Hello Christian,
presuming this is licensed software for your organization you can find this by selecting the following in your Service Market place Support Portal
In the support portal go to
Downloads
Installations and upgrades
Select Entry by application group
Select SAP Industry-specific Components"
Select SAP POS
Sincerely,
Anthonie Benson
SAP Active Global Support

SAP Business Workflow Vs UWL

As a part of our first release - we had HR and SRM and had major Portal usage. UWL was leveraged for the HR & SRM tasks.
Currently for our next release - we dont have any HR / SRM - But core business processes around SD, MM, FI modules and not any functionality is on Portal. There are couple of workflow scenarios that will be enabled via Business Workflows. We are considering a case, if we really want to display them via SAP Portal UWL too in addition and if that will be of any value add ?
Any suggestions, please ?

Hi Dhanz,
Yep, as Karri said, one of the main reasons why the UWL is so widely used is for central functionality. Another plus is the substitution functionality. With the inbox, users can assign other users to work on their tasks, request absence etc. For your end users - they do not have the sapgui installed on the desktop....with a browser and access to the portal they can check their inboxes. I would recommend though if you are adding more tasks and possibly more users that you check the sizing guide that I posted at the top of this forum as a sticky thread from our development support colleagues.
Beth Maben
EP - Senior Support Consultant II
SAP Active Global Support
Global Support Centre Ireland
**SDN Forum Moderator:
SAP Enterprise Portal: Application Integration
**SDN Universal Worklist Wiki:
http://wiki.sdn.sap.com/wiki/x/ehU

SAP* activation

Similar Messages

Maybe you are looking for