SAP Adapters for ODI/DIM/HAL

Hi Guys,
I was looking out for info on SAP adapters for ODI,Dim,Hal. Coulld someone point me to where I can get more info on this.
Thanks.

Look at this:
http://www.oracle.com/technology/products/bi/performance-management/data-integration-management-erp-mappings.html
Cheers
Stefano

Similar Messages

Certified SAP adapter for INFOR WMS

Dear Al,
Is there any certified SAP adapter for INFOR WMS.
Warm Regards,
Saurabh.

There are no SAP adapters for integrating with INFOR.
We have to use proxy communication to integrate with INFOR.

ODI 11.1.1.6 with SAP Adapters

Friends,
We are planning to replace our current ETL tool Informatica with ODI. In the current context, Informatica SAP Adapters are working fine extracting SAP data from SAP Tables (SE16) and SAP ABAP Functions (Called from Informatica Interfaces) in stream mode . With current setup, Informatica is able to extract 2 Million Records in 30 minutes.
We are not sure how ODI SAP Adapters work in this regard.
So any inputs on ODI SAP Adapters with regard to :
- Data extraction Performance
- Feasibility of Extraction of SAP Data from SAP Tables and SAP Functions (return dataset)
- Feedback on the stability and scalability of the ODI SAP Adapters
are highly appreciated. Thank you
Regards,
Sailendra T

There are two ODI SAP adapters available that allows extraction from SAP ERP and SAP BW. For SAP ERP we allow extraction from ERP tables, but not from RFCs/BAPIs. You can find details on that at http://www.oracle.com/technetwork/middleware/data-integrator/documentation/index.html The documentation was created for 10g release but still valid for 11g.
In our performance comparison we found significant improvement against competition. The actual performance, of course, depends on many, many things ranging from SAP HW, network, complexity of query etc.
Thanks

Upgrade: Adapters for SAP NetWeaver PI 1.1

Hello!
By the upgrade to SAP NetWeaver PI 7.3 we get (within Solution Manager Maintenance Optimizer) a addon Adapters for SAP NetWeaver PI 1.1.
Question
Do we need this addon when we go to SAP NetWeaver PI 7.3 or can we install this after the upgrade with SAINT?
thank you!

Many thanks!
I also have been asked (within Solution Manager Maintenance Optimizer) to update following contents:
EHP Component XI CONTENT ESM ERP 604
EHP Component XI CONTENT IS-H_IC 604
EHP Component XI CONTENT IS-H 604
Makes it sence to update with the upgrade process or can it wait?
Thank you!

Does anyone know about theAdvantco and Kate REST adapters for SAP PI?

I'm looking for any info I can find on a comparison between theAdvantco and Kate REST adapters for SAP PI?
Has anyone used one or both before?
Thanks,

Hi Gabriel - I haven't worked on Ka Te's adapter but have a look at the below blog for the advantages of using Advantco's rest adapter...
Integrating REST Services on PI
I don't see any major differences but below something i noticed in the release notes of Advantco's adapter.
Endorses Open Data Protocol (OData), a Web protocol for querying and updating data using Web technologies such as HTTP, Atom Publishing Protocol (AtomPub) and JSON to provide access to information from a variety of applications
Reference : Advantco Unveils SAP® Certified REST Adapter for SAP NetWeaver® | Advantco SAP NetWeaver Solutions

List of actively addressed adapters for Adapter Engine

There are two different types of adapter for sending data from a sender application
system to the Integration Server:
Adapters that can be actively addressed, for example the ABAP proxy adapter, the plain HTTP adapter, the IDoc adapter
Polling adapters, for example the file/FTP adapter and the mail adapter
Can anyone specify which adapters can be actively addressed? I'm using XI scaling and need to know which adapters I have to point to the adapter engine, versus polling adapters.

Hi George !
It sounds ok.
Here are some links that might be useful:
JDBC Adapter - Connection Pooling
Connection Pooling in JDBC Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e10b4b78-0801-0010-aaba-fb0a5f9c74fc
JDBC Connection pools and clusters (is max connection for entire cluster?)
http://help.sap.com/saphelp_nw04s/helpdata/en/56/1e5d427213d142e10000000a1550b0/frameset.htm
DAtasource and JDBC connection pool configurations
Regards,
Matias.

Adapters for Weblogic Integration

Hi guys,
I have some questions regarding to the adapters for WLI. In which case shall I use MQ adapter and RDBMS adapters for WLI? For example, if I use MQ with WLI domain, shall I buy MQ adapter? How about the RDBMS adapter?
Thank you very much for your time.
Mei

For PI 7.1,
Check stefan's reply in these threads PI 7.1 and Oracle JDBC driver: missing com.sap.aii.adapter.lib.sda
Re: Problem with JMS Adapter after upgrade to 7.1
Thanks!

Stetting up FTP and SFTP adapters for the same interface

Experts-
I have a situation in which client has a requirement to setup both FTP and SFTP adapters (from adapetive adapters) for the same interface. They want to have a copy of file locally and also want a file to be sent out securly using SFTP. In my interface which was previously developed they have used one business system and added FTP and SFTP to the same. If try to add new Receiver Agreement it will say that the object already exists as the Interface Mapping is same.
Please send me any suggestions which would resolve my problem

Hi Hari,
As you cannot create two Receiver agreement using only one receiver interface , please create a new receiver Interface, add that in interface determination step and then assing a different channel to new receiver agreement.
If your requirement is to store the file ,i would suggest write the file in your unix directory using NFS( /usr/sap...). then run a AFT job (if already set up in your landscape) to transfer file securly to target destination.Not sure if its feasible in your case otherwise you can use SFTP for the secure transfer.
Best Regards
Srinivas

RFC adapters for BusinessService??

Hi XI Friends..
In my FILE to BAPI scenario..i am using Receiver as BusinessService and adapter as RFC adapter.
can I use RFC adapters for BusinessService ??
please guide me..
regards
Ram

Hi,
Take a look at this link,
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
section Advanced Mode.
If you want to use this communication channel to call BAPIs as remote-enabled function modules that change data in the database, set the indicator.
If executed successfully, the transaction is written to the database by calling the function module BAPI_TRANSACTION_COMMIT explicitly. If an error occurs, the transaction is rolled back by BAPI_TRANSACTION_ROLLBACK.
The result is determined by the value of the field TYPE in parameter RETURN. If successful, the tables are empty and the values , S, I, and W are displayed. All other values are regarded as errors.
To change this setting, set the indicator BAPI Advanced Mode.
In the Successful RETURN-TYPE Values table, enter the values that should lead to a successful execution.
Regards,
Bhavesh

Mapping handling in third party vs SAP PI for EDI 850

Hi Experts,
Can I know Pros and Cons for hanling mapping translations in third party vs handling mapping translations in SAP PI for EDI 850 interface.
We are already paying money to third party. I just need pros and cons.. we will choose best approch based on your valuable points
Appreciate your help.
Regards,
Krishna.

Hi Mohan,
Pros:
SAP PI is a middleware and all Middlewares work pretty much on the same principles.
I am assuming that EDI 850 would have some sort of structure, [ to be honest I have not worked on EDI but just read about it] and SAP PI would require you to convert this structure into XML -> the only language SAP PI understands.
Now, I am sure there are lots of third party adapters available in the market for EDI. PI will give you flexibility to convert this interface into any kind of requirement be it JDBC/FILE/IDOC or anything and vice versa is also true. PI give you this enormous ability to convert to and from any format as long as it is viable.
Last but not the least, it will provide a robust system with Alerting and Monitoring.
Cons: You may have to invest on a third party adapter to read the EDI
You can read the following links for more abt EDI and SAP PI:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10b17369-9522-2c10-84a6-d75d8a8ace22?overridelayout=t…
Step by step interface for IDOC ORDERS05 to EDI 850 using B2B add-on and getting Functional acknowledgement 997 back
EDI 850 to R/3 scenario
Thanks & Regards,
Tejas Bisen

Difference between variuos SAP adapters!!

Hi,
Can anyone please explain the differences between BAPI,RFC and ALE?
Please tell me more about SAP adapters particularly BAPI.
Looking forward your reply,
Thanks in Advance!!
Regards,
Venkatesh.R.

Hi
a BAPI is an RFC enabled function module. The BAPI is different in that it encapsulates a complete business object. For example, "Create Sales Order" the BAPI for this allows you to create a sales order with a complete interface. BAPIs are also well documented in transaction BAPI.
RFC is just a remote enabled function module which you are allowed to call from outside the system, doesn't neccesarily encapsulate a complete business object.
check this
Differences
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
-charitha

ERPi FDQM/ODI/DIM

Hi Planning Gurus,
I need to understand, is ERPi seperate comonent or it comes with FDQM/ODI/DIM?
Does it also work with ODI/DIM?
Regards
Kumar

You should have a look at the docs
Oracle Hyperion Financial Data Quality Management ERP Integration Adapter for Oracle Applications is a module of Oracle Hyperion Financial Data Quality Management, Fusion Edition that enables you to perform the following tasks:
Integrate metadata and data from an Enterprise Resource Planning (ERP) source system into an Enterprise Performance Management (EPM) target application
Drill through from the EPM target application and view data in the ERP source system
Write-back budget data to the source system from any Oracle Hyperion Planning, Fusion Edition, Oracle Essbase ASO, or Essbase BSO application.
The Oracle Hyperion Enterprise Performance Management System Installer, Fusion Edition installs ERP Integrator. However, ERP Integrator relies on Oracle Data Integrator 10.1.3.6 as the engine that extracts data and metadata from the defined sources and then either populates the Performance Management Architect interface tables or populates the Classic applications with the extracted artifacts. Oracle Data Integrator must be installed and configured before ERP Integrator can be used.
Cheers
John
http://john-goodwin.blogspot.com/

Issue in SAP CPS for Job Interception

Issue in SAP CPS for Job Interception
Scenario:
After triggering a Process Chain in BW and maintaining the Job Interception settings in SAPCPS(Redwood)
(so that any job which triggers in BW by that Particular User is intercepted and not let it proceed further until the job is released in SAP CPS.)
Issue:
The Jobs are getting into Waiting status in SAP CPS(Redwood) even though there is no progress in loads in BW side. Also the Jobs are in Intercepted state even after releasing the Parent Job in SAP CPS(Redwood).
Please let us know how to go about it.

Hi Ramesh,
What you plan to do is called monitoring of process chains (ie. process chains not started from CPS) and this should be available in the latest version of CPS.
This requires the interception of only the BI_PROCESS_TRIGGER process, just as you have configured now, and other than that the following prerequisites:
SAP Note 1080558 describes the SP levels for the BW/BI releases
XBP 2.0 or higher
Redwood transport files must be loaded
ProcessServerService.SAP.XBPVariant license key
Maybe this helps,
Anton.

Unable to Print Purchase order automatically using SAP GUI for JAVA

Hi SAP gurus,
Some of the PC's in our company use windows and some LINUX. Therefore we use two types of SAP GUI. One for windows and the other one JAVA. PO approval was set to print automatically. In a windows setting, there are no problems with this setup. But in SAP GUI for JAVA, no print outs are produced and no error messages are displayed. I am using SAP GUI for JAVA version 7.10 ver 6. and I use Front end printing for linux access method G.
please help,
gungertz

hi gungertz,
You can use U type access method for printing SAP document using linux desktop.
Please refer to my blog posting here (http://sapbasis.wordpress.com/2007/08/23/print-sap-documents-using-linux/)
ardhian
http://ardhian.kioslinux.com
http://sapbasis.wordpress.com

Sap notes for 103 movement type and 105 movement types in sap

Hi all,
Please let me know if there are any sap notes for 103 movement type and 105 movement type in sap as soon as possible
points will be awarded.
thanking u in advance,
srinivas.

There are many SAP notes related to these movement types e.g 514609,750836,
533833, 808029, 317823,etc.
You can search them at http://service.sap.com
Regards,
Amit

SAP Adapters for ODI/DIM/HAL

Similar Messages

Maybe you are looking for