SAP Add on crash when use logon to more than one company

I have a client logon to 2 companies simultaneously and SAP CR give an error "SAP CR encountered problem and needs to close".
From the reply I receive in SAP Add On post, this is a known issue for Add on.
I believe it is a common expectation that users can logon to more than one companies and SAP Business One and all its add on can function properly.
It is a reasonable expectation and hope something can be done about this.

No reply, Just to close the post.

Similar Messages

How to add the rows formatted as table headings, Tables headings are repeated when a table spans more than one page.

Hi all,
i am facing problem while generating Test Result word document after successful execution of TestStand.
The Problem is :
i want to add rows Formatted as table headings, table headings are repeated when a table spans more than one page(marked as Red).
Example:
Page No. 1
|     Test case Number | Test Step number      |
|      100                         |            100                   |
Page No. 2
|     Test case Number | Test Step number      |
|      200                         |            300                   |
Test Result word document should generate with Table headings(marked as Red) in every pages of the document, but i am not getting as per above example.
Please through light on this.
Regards,
Susa.

Hi Santiago,
Thank you very much for your valuable reply.
i want to generate MS-word report for TestStand after successful testing using MS-word2000.
Test report contains Actual values, Expected values and Pass/Fail status.
In my program i have customized all fields i can able to generate test report which contains Verification engineer name , test mode, test date, start time, end time Actual values, Expected values and Pass/Fail status.etc....
To put all values of test case number, Test step number, Actual values, Expected values and Pass/Fail status in to table for each time, i will
insert a row into table every time values arrives, once the table exceedes its page size it moves to the next page, next page should start with table row header but it start with values of above said parameters.
so i'm not able to repeat table row header for each page.
Please find the attached file for your reference.
Attched file expected.doc :   This file contains what i wanted to generate MS-word report. Here table row header "Test Case Number and Test Step Number " is repeated in second page.
Attached file Actual output from source code.doc   : This report generated from the source code. Here table row header "Test Case Number and Test Step Number" is not repeated in second page.
Do you know any property to set "repeat as header row at the top of each page" using MS-word ActiveX in CVI/Labwindows.
i think this information is sufficient for you,
Still if you need some information please ask me.
Thanks
Susa.
Attachments:
Actual output from source code.doc ‏25 KB
expected.doc ‏26 KB

TS4123 This is not correct solution. I have fresh copy of Windows 7 64 bit and I have the same problem. Autorun only shows the Bonjour service. It started when try to sync more than one iphone.

This is not correct solution. I have fresh/new copy of Windows 7 64 bit and I have the same problem.
Autorun only shows the Apple Bonjour service. It started when try to sync more than one iphone over WiFi. I have two iphones and an iPad. I turned off syncing over WiFi and still has high CPU utilization. One of the CPU's is pegged at 100%. It is the AppleMobileDeviceService.exe process.

For the record, I then followed the suggestion of MarcDCMB in https://discussions.apple.com/thread/4291206 of just manually restarting the Apple Mobile Device service in Windows services.msc once each time after starting iTunes and the service no longer hogs CPU after that service restart. Not too painful as a work-around, and apparently an effective one, but clearly not a solution to the problem. Again, as above, all the other solutions didn't work for me and I have no conflicting software as far as I can tell. So you'd have to say this Apple's problem.
Also FTR, I am still on the 5.2.0.6 version of the Apple Mobile Device Support MSI and I don't know if that is relevant to this work-around working but my sense is that it is NOT relevant. I'll report back on this thread if I re-upgrade and the problem returns in spite of the service-restart approach.

Can I use lightroom on more than one computer

Am I able to use lightroom on more than one computer. As in if I download it to my PC can I then use the same license for my laptop?

Yes, you are allowed to have to installations at any time from the same license, provided each installation is for your own personal use and the two installations are not used simultaneously

Cannot sign into creative cloud; cannot use creative cloud to access XI, want to use XI on more than one computer

Cannot sign into creative cloud from 2nd computer, if try to use activation code error message is "oops, already in use"; cannot use creative cloud to access XI, want to use XI on more than one computer

Link for Download & Install & Setup & Activation problems may help
-Chat http://www.adobe.com/support/download-install/supportinfo/
OR
http://forums.adobe.com/community/download_install_setup

Using Lightroom on more than one computer

I recently bought Lightroom on the Apple App store for my mac mini. Is there a way to install it onto my PC desktop as well? Also, can I use it on more than one mac?
[email protected]
http://photomurphey.blogspot.com
Find mem on Facebook (search Jake Murphey Photography)

If you purchased from the Mac App Store, there is no serial number, so no, I'm afraid you can't. Anything in the Mac App Store is subject to Apple's terms rather than Adobe's. There's more information here: http://blogs.adobe.com/lightroomjournal/2012/05/lightroom-4-now-available-on-the-mac-app-s tore.html I believe the Mac App Store licensing usually allows installing on up to 5 Macs though.

Using photoshop on more than one computer

I purchased Photoshop CS6 for my home Mac several months ago. I am about to buy my daughter a Mac. Will I be able to install photoshop on her computer, too? Can I use it on more than one computer in the same household?

You can "install" it on two computers, but the End User License Agreement stipulates that you cannot run it on both at the same time.

I am considering buying Acrobat 11 Prio on a monthly subscription but I would like to use it on more than one machine is this possible?

I am considering buying Acrobat 11 Prio on a monthly subscription but I would like to use it on more than one machine is this possible?

You are allowed to have two working installations so if you want to have it on two machines you can. If you want it on more than that then you need to manage which ones are working at any given time such that only two are usable.

When I update applications more than one account appears. How do I delete second account

when I update applications more than one account appears. How do I delete second account?

I'm wondering if you have to Apples IDs or iTunes IDs and have puchased apps on both accounts.I have the same issue, and must supply both accounts' passwords in order to update apps. From my research here, there's no way to merge the two accouts. It is aggrivating, indeed.

CS3 Crashes When trying to open more than 1 file

Hi All,
My work copy of CS3, Photoshop in particular, is crashing every single time I try to open more than one file. I tried trashing the preferences when using WinXP. We couldn't get it to stop crashing upon opening more than 1 file regardless of the open method (Recent docs, File>Open, Drag & Drop, etc)
So then I actually got a new computer (bonus!) and there's Vista Ultimate on it. All was working great until this morning and now sure enough if I try to open more than one file, CRASH...
Does anybody have any ideas on how to fix this? It must not be my machine because I've tried two machines..
Any help is appreciated! Thank you!

If your still running vista Click on control and switch to classic view. Look for folder options. On the View tab look for hidden files and folders and select "Show hidden files and folders". Same tab Uncheck " hide protected operating system files". Hit APPLY then ok and close out.This will now show all files on your system.
Right click on my computer and select properties. Click on advance system properties. Click on advance tab. Look for Performance and click on settings.
On the advance tab look for Virtual memory and select "Change" If you only have on hard drive you should see C drive. what you want to do is select "Custom size". Look for recommended file size (mine reads 12285 MB) What you want to do is put that number size in "Initial size" and Also "Maximum Size" and hit the "set" button. What this does is it lets Vista set a set amount of Virtual memory that can be used as RAM. This will help Vista from wanting the same Hard disk space for Virtual Memory and Adobe Scratch Disk Space doing the same thing. You will have to reboot.
Go to start and type in msconfig and hit enter. Go to Start up tabe and uncheck any start up items that do not need to start when you start your computer. While your in that area you can click on the boot tab. Click on Advance options. Look for number of processors and check the box. If you have more then one core processor click on the down arrow and look for the number of processors you have. (for example I have 4 so I selected 4. Hit ok. Then in the other main window hit apply then OK. A screen will pop up telling you to reboot. Selecting more then one processor (if you have more then one) will allow the computer to boot using all processors and maybe notice a faster boot time.
Did you patch CS3 after you installed it on Vista? Also did you defrag your hard drive?

TS4268 Why have I been charged for iMessage activation now, when I have been using iMessage for more than one year?

I received a message on my iPhone saying that some charges could be applied due to activiation of iMessage. My question is: why have I been charged now, if I had already activated iMessage and I have been using it for more than a year.

We are basically users and can't really help with activation. So unless a staff member can check in, you need to speak to Customer Service.
http://helpx.adobe.com/x-productkb/global/service1.html
Serial number and activation chat
or
800-833-6687
Monday—Friday, 5am—7pm PT

Auto creation of child requests when parent request has more than one group

Hi,
I have created a request dataset which has a child form for AD Group. While raising a request, if I add more than one group, how to process the approval flow. Because I will be having different different approvers for different different groups. Is there any way to create child requests automatically when we submit a request with more than one group? I am using OIM 11.1.1.5.0.
I know in OIM 11g, whenever user raises request for more than one beneficiary/target-resource then OIM breaks that request into Child Requests. But this is not happening when I add more than one group in the same resource. Do I need to write my own code for DataValidator to split parent request into child requests upon validating child form? If so, is it going to impact the existing feature which is creating child request when parent has more than one user/resource.
Please let me know.

No not possible OOTB in current version. Check {thread:id=2318652} for more information.
-Bikash

How to use ipod w/ more than one computer

I am new to ipod. I set it up on my laptop, and have all uploaded my cds to my ipod from there. I do nat have internet at home, so tried using my parents computer. How do you use the ipod with another computer that doesn't have all your songs on it? When I go to sync it, it ask if i want to delete all my ipod songa and replace with the ones on the other computer. I am trying to get album artwork. What am I not doing right?

If you want to connect and use an iPod on more than one computer or with more than one library you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply. The content of iTunes and the iPod are not syncronised in this mode so the two can be different. You can directly access the content of the iPod and play it through iTunes and you can drag and drop whatever you want to the iPod from either library. Even when manually managing an iPhone, you can only add content from one iTunes library.
Using iPod with Multiple computers
Managing content manually on iPod and iPhone
Syncing Music to iPod
Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod
You can use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on Windows hold down the Shift + Ctrl keys together. This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer: iTunes - Keyboard Shortcuts for Windows
When your iPod appears in the iTunes source list change the update setting to manual, that way you can continue to use your iPod without the risk of accidentally erasing it.

How to use beans in more than one page

hello members,
can somebody tell me how to make beans availabe to more than one page ,i used scope variable as "application"
in which i set the value of java bean and in that page it show all values of that bean even it modified
but when redirect to another jsp page it does not show modifided value,it shows its default value
what shld i use tell me
following thing that i use in forwarded jsp page
<jsp:useBean="same id in previous jsp page", class="same class", scope="application"/>
and then i am using boolean variable which set false default ,but i set it manually though
setfuction (assume) in original jsp page,but in redirected page it showing it value fasle
i don't know why
can somebody (Bean Bond) help me in this problem
i will very thankfull to you
plz..................

My dear friend,
your scope is wrong. Since you run a JSP page and you want it available everywhere, the only thing that all pages have common is session. So changing your bean scope to session will keep the bean variables and the rest you have on it.
Try it and let me know.

Some apps stay open when trying to close more than one app at a time in ios 7

I tried closing down 2 or 3 app at a time in IOS7 and there's always one or two that stay open. The icon at the bottom is still there but I've already swiped it up to close it. When I go out of the closing function and come back I see that they are still open and I need to close them again. I tried this on many ipads, iPhones and ipod touch and they all act the same way.
Chris

I guess you didn't know, but yes you can close more than one app at a time. You can close up to 3 apps at a time in the new IOS7 on the iPhone. Try opening at least 3 apps and then double click the main button to see what apps are opened. Then swipe to the left to see the three of them on your screen. Your not gonna see the ones on the side entirely but you can still put all three fingers on them, then simply swipe them up and it closes them up.
The thing is, when you have let say 10 apps open, and you start using this trick, some of them will stay open meaning you swiped them up to close them down but the bottom icon stays there. When you come back to your main IOS desktop and then go back to close the programs that you have opened, you can see that those apps are still opened. There is only like 2 or three out of all the 10 you had opened that stayed open, but none the less it's a bug in the system I presume.
You also asked about the icon at the bottom. When you are seeing what apps are opened, there is always a small icon at the bottom and on top you have a representation of what you were working on, and that is the part you swipe up. But often time the bottom icon will stay opened after swiping 2 or 3 of the apps to close them.

SAP Add on crash when use logon to more than one company

Similar Messages

Maybe you are looking for