SAP AII 2.1 RULES and Activities

Hello!
I have configured the Standalone Business Scenario for SAP AII 2.1 but am stuck on an issue :
If the reader reads a pallet at location A,Packs it to stock,then at another location B the pallet is loaded and finally shipped out.For instance if by chance the pallet comes into the proximity of the reader at location A that read it previously our scenario suggests that the pallet EPC should be discarded but on implementation SAPAII read the pallet again and performed the previous set of operations.
Can anybody suggest how to solve the issue.
Thanks
Mir Junaid

Hi,
please post your question on the AII forum:
Product Traceability & RFID
Regards,
michal

Similar Messages

How to handle rules and activities in AII

Hi experts,
How to handle rules and activities in AII. Is there any transaction code for it. please give some information, it will be hepful for me

In IMG go to Conditions & Rules to configure the relevant rules.
Rules in AII represent business process you intend to RFID enable. Each rule is made up of multiple activities that defines exactly how a particular rule functions.
SAP delivers standard rules & activities for standard scenarios of Pack, Load etc. processes.
For more information on AII rules and activities refer to the performance assistant available in IMG or read more at the link below:
http://help.sap.com/saphelp_autoid40/helpdata/en/index.htm
Hope this helps.
-Ashish

Com.sap.aii.adapter.jdbc.svc and com.sap.aii.adapter.jms.svc don't start

Hello,
In order to configure JMS Receiver Adapter to access Websphere Application Server 7.0, I have recently deployed file com.sap.aii.adapter.lib.sca with the following libraries:
com.sap.aii.adapter.lib_api.jar
com.ibm.ws.ejb.thinclient_7.0.0.jar
com.ibm.ws.orb_7.0.0.jar
com.ibm.ws.sib.client.thin.jms_7.0.0.jar
com.ibm.ws.runtime.jar
javax.j2ee.jms.jar
The communication channel can reach the queue but when I send a message it fails because services sap.com/com.sap.aii.adapter.jdbc.svc and com.sap.aii.adapter.jms.svc are not started.
Checking dev_server0 file I found the following error.
==============================================================================================
Service com.sap.aii.adapter.jdbc.svc start ================= ERROR =================
com.sap.engine.frame.ServiceException: Could not obtain an initial context due to a communication failure. Since no provider
URL was specified, the default provider URL of "corbaloc:iiop:1.0(at)sapdpi-lpar:2809/NameService" was used. Make sure that any
bootstrap address information in the URL is correct and that the target name server is running. Possible causes other than
an incorrect bootstrap address or unavailable name server include the network environment and workstation network configurati
on.
at com.sap.aii.adapter.jdbc.SapAdapterServiceFrameImpl.start(SapAdapterServiceFrameImpl.java:151)
at com.sap.engine.core.service630.container.ServiceRunner.startFrame(ServiceRunner.java:155)
at com.sap.engine.core.service630.container.ServiceRunner.startService(ServiceRunner.java:113)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:60)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260)
Caused by: javax.naming.ServiceUnavailableException: Could not obtain an initial context due to a communication failure. Sinc
e no provider URL was specified, the default provider URL of "corbaloc:iiop:1.0(at)sapdpi-lpar:2809/NameService" was used. Make
sure that any bootstrap address information in the URL is correct and that the target name server is running. Possible caus
es other than an incorrect bootstrap address or unavailable name server include the network environment and workstation netwo
rk configuration. [Root exception is org.omg.CORBA.TRANSIENT: java.net.ConnectException: Connection refused:host=sapdpi-lpar,
port=2809 vmcid: 0x4942f000 minor code: 3586 completed: No]
at com.ibm.ws.naming.util.WsnInitCtxFactory.mapInitialReferenceFailure(WsnInitCtxFactory.java:2228)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getWsnNameService(WsnInitCtxFactory.java:1414)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getRootContextFromServer(WsnInitCtxFactory.java:944)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getRootJndiContext(WsnInitCtxFactory.java:865)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getInitialContextInternal(WsnInitCtxFactory.java:545)
at com.ibm.ws.naming.util.WsnInitCtx.getContext(WsnInitCtx.java:123)
at com.ibm.ws.naming.util.WsnInitCtx.getContextIfNull(WsnInitCtx.java:798)
at com.ibm.ws.naming.util.WsnInitCtx.rebind(WsnInitCtx.java:242)
at com.ibm.ws.naming.util.WsnInitCtx.rebind(WsnInitCtx.java:255)
at javax.naming.InitialContext.rebind(InitialContext.java:367)
at javax.naming.InitialContext.rebind(InitialContext.java:367)
at com.sap.aii.adapter.jdbc.SapAdapterServiceFrameImpl.start(SapAdapterServiceFrameImpl.java:100)
... 6 more
Caused by: org.omg.CORBA.TRANSIENT: java.net.ConnectException: Connection refused:host=sapdpi-lpar,port=2809 vmcid: 0x4942f0
00 minor code: 3586 completed: No
at com.ibm.CORBA.transport.TransportConnectionBase.connect(TransportConnectionBase.java:425)
at com.ibm.ws.orbimpl.transport.WSTransport.getConnection(WSTransport.java:436)
at com.ibm.CORBA.transport.TransportBase.getConnection(TransportBase.java:187)
at com.ibm.rmi.iiop.TransportManager.get(TransportManager.java:89)
at com.ibm.rmi.iiop.GIOPImpl.getConnection(GIOPImpl.java:120)
at com.ibm.rmi.iiop.GIOPImpl.locate(GIOPImpl.java:209)
at com.ibm.rmi.corba.Corbaloc.locateUsingINS(Corbaloc.java:307)
at com.ibm.rmi.corba.Corbaloc.resolve(Corbaloc.java:378)
at com.ibm.rmi.corba.ORB.objectURLToObject(ORB.java:3721)
at com.ibm.CORBA.iiop.ORB.objectURLToObject(ORB.java:3256)
at com.ibm.rmi.corba.ORB.string_to_object(ORB.java:3619)
at com.ibm.ws.naming.util.WsnInitCtxFactory.stringToObject(WsnInitCtxFactory.java:1524)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getWsnNameService(WsnInitCtxFactory.java:1389)
... 16 more
Caused by: java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:522)
at java.net.Socket.connect(Socket.java:470)
at java.net.Socket.<init>(Socket.java:367)
at java.net.Socket.<init>(Socket.java:180)
at com.ibm.ws.orbimpl.transport.WSTCPTransportConnection.createSocket(WSTCPTransportConnection.java:270)
at com.ibm.CORBA.transport.TransportConnectionBase.connect(TransportConnectionBase.java:354)
... 28 more
Service com.sap.aii.adapter.jms.svc start ================= ERROR =================
com.sap.engine.frame.ServiceRuntimeException: Could not obtain an initial context due to a communication failure. Since no pr
ovider URL was specified, the default provider URL of "corbaloc:iiop:1.0(at)sapdpi-lpar:2809/NameService" was used. Make sure t
hat any bootstrap address information in the URL is correct and that the target name server is running. Possible causes othe
r than an incorrect bootstrap address or unavailable name server include the network environment and workstation network conf
iguration.
at com.sap.aii.adapter.jms.core.service.AdapterServiceFrameImpl.bindAdapter(AdapterServiceFrameImpl.java:171)
at com.sap.aii.adapter.jms.core.service.AdapterServiceFrameImpl.start(AdapterServiceFrameImpl.java:125)
at com.sap.engine.core.service630.container.ServiceRunner.startFrame(ServiceRunner.java:155)
at com.sap.engine.core.service630.container.ServiceRunner.startService(ServiceRunner.java:113)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:60)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260)
Caused by: javax.naming.ServiceUnavailableException: Could not obtain an initial context due to a communication failure. Sinc
e no provider URL was specified, the default provider URL of "corbaloc:iiop:1.0(at)sapdpi-lpar:2809/NameService" was used. Make
sure that any bootstrap address information in the URL is correct and that the target name server is running. Possible caus
es other than an incorrect bootstrap address or unavailable name server include the network environment and workstation netwo
rk configuration. [Root exception is org.omg.CORBA.TRANSIENT: Connection state: State: ABORT (5) vmcid: 0x4942f000 minor co
de: 775 completed: No]
at com.ibm.ws.naming.util.WsnInitCtxFactory.mapInitialReferenceFailure(WsnInitCtxFactory.java:2228)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getWsnNameService(WsnInitCtxFactory.java:1414)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getRootContextFromServer(WsnInitCtxFactory.java:944)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getRootJndiContext(WsnInitCtxFactory.java:865)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getInitialContextInternal(WsnInitCtxFactory.java:545)
at com.ibm.ws.naming.util.WsnInitCtx.getContext(WsnInitCtx.java:123)
at com.ibm.ws.naming.util.WsnInitCtx.getContextIfNull(WsnInitCtx.java:798)
at com.ibm.ws.naming.util.WsnInitCtx.rebind(WsnInitCtx.java:242)
at com.ibm.ws.naming.util.WsnInitCtx.rebind(WsnInitCtx.java:255)
at javax.naming.InitialContext.rebind(InitialContext.java:367)
at javax.naming.InitialContext.rebind(InitialContext.java:367)
at com.sap.aii.adapter.jms.core.service.AdapterServiceFrameImpl.bindAdapter(AdapterServiceFrameImpl.java:163)
... 7 more
Caused by: org.omg.CORBA.TRANSIENT: Connection state: State: ABORT (5) vmcid: 0x4942f000 minor code: 775 completed: No
at com.ibm.rmi.iiop.Connection.checkEstablished(Connection.java:3091)
at com.ibm.rmi.iiop.Connection.send(Connection.java:2145)
at com.ibm.rmi.iiop.Connection._locate(Connection.java:463)
at com.ibm.rmi.iiop.Connection.locate(Connection.java:439)
at com.ibm.rmi.iiop.GIOPImpl.locate(GIOPImpl.java:219)
at com.ibm.rmi.corba.Corbaloc.locateUsingINS(Corbaloc.java:307)
at com.ibm.rmi.corba.Corbaloc.resolve(Corbaloc.java:378)
at com.ibm.rmi.corba.ORB.objectURLToObject(ORB.java:3721)
at com.ibm.CORBA.iiop.ORB.objectURLToObject(ORB.java:3256)
at com.ibm.rmi.corba.ORB.string_to_object(ORB.java:3619)
at com.ibm.ws.naming.util.WsnInitCtxFactory.stringToObject(WsnInitCtxFactory.java:1524)
at com.ibm.ws.naming.util.WsnInitCtxFactory.getWsnNameService(WsnInitCtxFactory.java:1389)
... 17 more
==============================================================================================
Could anyone tell me why is trying to connect to "corbaloc:iiop:1.0(at)sapdpi-lpar:2809/NameService"? Do I have to configure a default provider URL for SAP PI server? If so, where I configure it? Any help will be appreciated.
Thank you in advance.
Roger Allué i Vall

Hi Roger,
we also experience the same issue and would be very keen to understand how you resolved this problem.
Many thanks.
Dieter

SAP AII Rules and Activities

Hello!
I have configured the Standalone Business Scenario for SAP AII 2.1 but am stuck on an issue :
If the reader reads a pallet at location A,Packs it to stock,then at another location B the pallet is loaded and finally shipped out.For instance if by chance the pallet comes into the proximity of the reader at location A that read it previously our scenario suggests that the pallet EPC should be discarded but on implementation SAPAII read the pallet again and performed the previous set of operations.
Can anybody suggest how to solve the issue.
Thanks
Mir Junaid

Hi Junaid;
   An interesting suggestion, because that is how we do it. Our device controller is was written on OO ABAP on NetWeaver. It does not do what you are suggesting, but it does do something that may point you in the right direction.
   It does store the tags in shared memory, which could help you with filtering. The concept of shared memory is very robust in 6.40, and could solve your problem in conjunction with a new rule.
   We do it slightly differently here. We don't use a reader to pack the device, we "pack" the document when the delivery message comes over from R/3 (on the APL2 output) with a custom rule that has an ABAP front-end to pull the data together and programmatically call the rule processor. That allows us to decisively indicate to the system the relationship between the case and the pallet labels. It also eliminates the problem of needing another reader to do the packing. It kind of side-steps what might be a complete process because it leaves the correct tag application up to a human, but it works.
   Then when the ALB0 message comes over, we print the tags and the document is set up for the load. The tags then pass through the portal on the dock door and the device controller passes the data to AII. The only problem we run into is overlap between two adjacent dock doors, but that is an issue for another thread...
Cheers,
John

SAP AII (Auto-ID Infrastructure) to BizTalk RFID scenario

Hi Everyone,
did some one work on this type of project ....
This project is <b>to develop a connector between SAP AII (Auto-ID Infrastructure) and BizTalk RFID for handling RFID related activities.</b>
Quick response would be appreaciated.....
Cheers,
Raghavesh

Hi Raghavesh,
If you want to use a Connector to communicate between Biztalk and SAP AII..you can use .Net connector available.
The other way is SAP AII uses XI for Communication...so you can use webservices between Biztalk and XI. The below document should be helpful
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7521a237-0701-0010-499b-b3285b789c0d
Use SOAP adapter for BIZTALK .
Use plainHttp adapter for XI .
Regards
Satish

Unable to start service 'com.sap.aii.adapter.jms.svc'

Hi people,
After I have successfully deployed the external drivers jdbc/jms drivers on a PI 7.1 system trough JSPM using the com.sap.aii.adapter.lib.sda file but now the com.sap.aii.adapter.jms.svc and the com.sap.aii.adapter.jdbc.svc do not want to start up. When checking the log DefaulTrace log file I found the following error Reported reason: Service com.sap.aii.adapter.jms.svc is not loaded Any ideas on what the problem could be?

Hi people,
Thanks for all the ideas. I have followed all the notes and guides to prepare the SDA file ie editing the XML file and adding the JAR files.
The problem was that somewhere along the line the provider.xml file of the old aii_af_jmsproviderlib.sda and the new com.sap.aii.adapter.lib.sda file seeming ot "merged" during my struggles.
The provider.xml file of the SDA which I tried to uploaded had the two reference entries which actually belong to the old aii_af_jmsproviderlib.sda in as well as the correct reference entry. Once I removed these incorrect reference entries the services started up correctly.
I found the error mention above by firstly renaming the DefaultTrace_X.trc file and restarting the JAVA stack. I then stepped through each line of the newly created DefaultTrace_X.trc file from the top down and found the following entries:
1) Cannot resolve component library:sap.com/com.sap.aii.adapter.lib because referenced component Reference strong to library com.sap.aii.messaging.runtime not found#
2) Cannot resolve component service:sap.com/com.sap.aii.adapter.jdbc.svc because referenced component library:sap.com/com.sap.aii.adapter.lib not resolved#
3) Cannot resolve component service:sap.com/com.sap.aii.adapter.jms.svc because referenced component library:sap.com/com.sap.aii.adapter.lib not resolved#
In line line 1 I saw that it was referencing the com.sap.aii.messaging.runtime which seemed suspect. Luckily I still had the original SDA file and when comparing it to the uploaded SDA file I found the incorrect entry.
Thanks again for all the help

Sap AII auto id infrastructure - BW Extraction with 0AI_1 Datasource

Hi Gurus,
We are working with Sap AII "auto id infrastructure" and BI Nw2004s Sp12.
We have problems with the standard datasource 0AI_1.
We have find the problem in the source of the function "/AIN/BW_FILL_IT_0AII_TRAN" in the standard program "/AIN/BW_INIT_UPLOAD_30". In this program there are different errors.
We have find errors also in the the delta extraction, the field ROCANCEL is not valorized!
We suggest to Sap to repair this program!
Best regards,
Domenico.

Hi Gurus,
We'd like to know if someone is using the standard datasource 0AI_1.
We are getting a lot of extraction errors.
Thanks in advance.
Domenico.

PI 7.1 and Oracle JDBC driver: missing com.sap.aii.adapter.lib.sda

Hello,
I want to deploy the JDBC driver for Oracle databases as described in OSS 1138877 on a brand-new PI7.1 (SP06 Stack) installation. Unfortunately, I can't find com.sap.aii.adapter.lib.sda on the system, so I can't add the ojdbc14.jar file and deplay it using JSPM.
Where can I get it from?
Thank you and best regards,
Herwig

hey,
The JDBC driver installation is different for PI 7.1.
The dowload/modify/deploy .sap.aii.adapter.lib.sda method was used in the earlier versions.(mentioned in the How to guides)
Look at the SAP documentation below -
http://help.sap.com/saphelp_nwpi71/helpdata/en/cf/128a42f802a01ae10000000a155106/frameset.htm
Arvind R

Components com.sap.aii* and com.sap.xi* not found

Hi
In a test system of a XI (NW 2004s) the components sap.com/com.sap.aii* and sap.com/com.sap.xi* are not displayed in Cluster -> Services -> Deploy -> Application therefore ExchangeProfile and Repository (rep/start/index.jsp) don't work.
This components are installed in development system, don't know if was installed manually.
The question is if this components can be downloaded and installed (deployed), or installed same files of development system, unfortunately the sda's are not in the server but i have the dvd's.
Thanks in advance,
Jose Agurto

please try this thread
com.sap.xi.services not starting in XI3.0

Printer device group and a label format in SAP AII

Hello @ all,
I try to configure a SAP OER System with SAP AII. Now I should configure the label printing with the transaktion /AIN/ASGN_PRF_FORMAT. I must take a profile name, a printer device group and a label format. The problem is now, that I can't chose a printer device group and also I don't know the label format. Where can I adjust the printer device group and which label format must be in that field?
Can anybody help me?
Thank you.
Peter

Hi Peter,
SAP AII sends the label format filename as part of the Command message xml to the printer during tag commissioning.
I assume you have configured the label format filename for SAP_PRINT_PROFILE using transaction /AIN/ASGN_PRF_FORMAT - Assign Format to Printer and Profile
Now you have to assign that profile to an ID type or GTIN, etc. using the menus under Profiles for Tag Commissioning and Label Printing.
Once this configuration is done, the xml command message containing the element WriteTagData is sent to the printer RFC destination configured against the Device controller as an HTTP message.
This command message will contain the label format and field names - value pairs as per the SAP_PRINT_PROFILE.

Relations between SAP AII, ONS, PML and Savant???

The EPCGlobal provides a standard EPC-Network containing the EPC-Code and infrastruture-components like the RFID-Tag and -Reader, the ONS-Server, the PML-Server and a RFID-Middleware called Savant.
On the one hand I found a couple of articles where the SAP Auto-Id Infrastructure (SAP AII) is said to be a "RFID-Middleware". On the other hand I found a lot of presentation sheets with illustrations of the SAP AII architecture where the SAP AII is connected to Savant by the device controller and to the ONS/PML Servers by SAP XI.
Can anybody inform me about the relationship between the SAP AII, the ONS/PML Servers and Savant? Is the SAP AII a substitute for Savant? Which component of the SAP Auto-ID Infrastructure asks the ONS-Server for the URL to a PML Server where further information about an object which is identified by the EPC code are located? Are product information stored on a PML-Server anyway? Or are information only stored in the ERP-Backendsystem?
Thank you for your reply.

hi.Dirk
1)SAP AII is a "RFID-Middleware", but mostly it is a RFID Middleware for business process. It focus on business more than RFID readers. So it is not a RFID Reader manager(Device connector, or something like that)
2)Savant is a specification or a product release by EPC global. You can download the savant specification on EPC global .
http://www.epcglobalinc.org/about/AutoID_Archive/documents/6_auto_id_savant-1_0.pdf
Savant is also a product, many company IBM, SUN make their RFID Middleware follow the EPC savant specification. And also EPC has a RFID-Middleware call savant.
Savant is design to manager RFID readers, filter RFID tag information, and log events.
3)The relation between AII and savant is they are on the diferrent layer of RFID Middleware, they should be work together.
4)ONS is another EPC RFID issue, it is design to record RFID tag data. On EPC's idea, all the data about RFID tag should be record on ONS server. I do not know if it will come true in the future.
5) On SAP solution, Most of the data is still stored in SAP backend-system(R3,SCM,BW......), and information about RFID, e.g. RFID tag, RFID device, tag event is stored in SAP AII. And you can use BW in AII, if mass data is generated.
6) PML is just a RFID XML.
Regards
Sheng

PROXY_NOT_ALLOWED_ON_IS ( SAP ISR and SAP AII Integration problem )

Hi,
I have facing this problem, during SAP IS retail and SAP AII integration ...
SAP AII and SAP PI in same physical server but different client ..
scenario Detail --
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b3084b-0953-2a10-2993-c0a5fe81d591
server detail ..
I am using standard content for integration .. (
SAP IS retail (client 200. server XYX)
SAP AII ( Client 100 server xxx)
SAP PI (Client 001 server xxx)
Error Detail -
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PROXY_NOT_ALLOWED_ON_IS</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Proxy calls are not permitted on sender or receiver side on the IS (client)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please help ....................
Regards,
Amit
Edited by: Amit Shivhare on Apr 7, 2009 11:53 AM

Hi all,
That problem is solved . but new problem come ..
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">PARSE_APPLICATION_DATA</SAP:Code>
<SAP:P1>Request Message</SAP:P1>
<SAP:P2>CX_ST_DESERIALIZATION_ERROR</SAP:P2>
<SAP:P3>/1SAI/TXSC93730E87CC1B9E866B5</SAP:P3>
<SAP:P4>XML Bytepos.: 254 XML Path: ns0:BusinessDocumentExecutionRequest(1)BusinessDocument(2)TypeCode(2) Error Text: Data loss occurred when converting Test Kernel ErrorId: CONVT_DATA_LOSS</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during XML => ABAP conversion (Request Message; error ID: CX_ST_DESERIALIZATION_ERROR; (/1SAI/TXSC93730E87CC1B9E866B5 XML Bytepos.: 254 XML Path: ns0:BusinessDocumentExecutionRequest(1)BusinessDocument(2)TypeCode(2) Error Text: Data loss occurred when converting Test Kernel ErrorId: CONVT_DATA_LOSS)) An error occurred when deserializing in the simple transformation program /1SAI/TXSC93730E87CC1B9E866B5 Data loss occurred when converting Test</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Regards,
Amit

Sap aii and application level events layer

does the sap aii conform to the ALE speifications just released by EPC Global??

Yes, SAP AII provides support for the ALE protocol.

How to use rules and roles in workflow?

Hi experts,
I am a beginner in workflow. Could any one tell me how to use rules and roles in workflow ?
Can u pls tell me the steps to follow?
and more over what are all the <b>important things</b> we have to learn in workflow module ??
I shall be thankful to u.
Thanks
uma

Hi
Workflow automates the steps and activities in a business process according to predefined procedures and rules.
Workflow presents information and documents to the appropriate knowledge worker or agent (another entity such as a program) to make a decision or perform an activity.
Workflow tracks each and every step in the process flow and maintains an ongoing status.
Workflow also collects and reports all of the metrics associated with the execution and completion of the process.
Check the below links u will get lot of info..
http://www.sap-press.com/product.cfm?account=&product=H950
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
Go through the following links on FORK :
http://help.sap.com/saphelp_nw04/helpdata/en/24/e2283f2bbad036e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8d/25f1e7454311d189430000e829fbbd/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/c5/e4a930453d11d189430000e829fbbd/content.htm
http://www.insightcp.com/res_23.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
For more reference on workflow: http://****************/Tutorials/Workflow/Workflow.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/04/9277a346f311d189470000e829fbbd/frameset.htm
Check these links.
http://www.sapgenie.com/workflow/index.htm
/people/ginger.gatling/blog/2005/12/01/link-workflow-business-objects-to-your-collaboration-tasks
http://help.sap.com/saphelp_nw04/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw31/helpdata/en/8d/25f94b454311d189430000e829fbbd/content.htm
http://www.sap-press.com/product.cfm?account=&product=H950
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
Workflow tutorials with step-by-step and with screenshots are available at http://www.****************/Tutorials/Workflow/Workflow.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/42/c14a9b55103116e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
http://www.sapgenie.com/workflow/
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2857887
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2855919
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2735228
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
Debug a workflow.
This has a step by step procedure :
http://fuller.mit.edu/workflow/debugging.pdf
www.erpgenie.com/sap/workflow/debugging.htm
http://www.erpgenie.com/workflow/debugging.htm?2b5de440
Workflow tutorials with step-by-step and with screenshots are available at
http://www.****************/Tutorials/Workflow/Workflow.htm
http://www.sapgenie.com/workflow/
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2857887
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2855919
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2735228
http://www.sapbrain.com/TUTORIALS/TECHNICAL/WORKFLOW_tutorial.html
Regarding Work Flow
work flow scenarios.
1. applying for a leave.
2. approval process.
3. material creation process.
4. mainly work flow is for notification purpose.
chk this links
http://help.sap.com/saphelp_erp2005/helpdata/en/fb/135962457311d189440000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.erpgenie.com/workflow/index.htm
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
http://www.insightcp.com/res_23.htm
A good tutorial
http://www.thespot4sap.com/articles/Invoice_Verification_Automation_Using_SAP_Workflow.asp
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
/people/alan.rickayzen/blog
/people/jocelyn.dart/blog/2006/06/19/why-use-abap-oo-with-workflow
a good book
http://www.sap-press.com/product.cfm?account=&product=H950
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.sap-press.com/downloads/h950_preview.pdf
Check the following PDF
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
also seach the workflow forum: SAP Business Workflow
Regards
Anji

Pkg com.sap.aii.proxy.framework.core don't exist even added in the JRE path

Hi All,
I am facing some error while activating the activity. I have checked-in the activity but getting the error while trying to activated the activity. there are two DC's in one of them i am gettign this error. i have not noticed this while check-in.
After checked in - i am not getting the any such option --Revert activitty or delete activity.
This activity is alreday closed.. what i can do with this activity?? After this error i am not able to activate any activity. I am getting the below error in all the activity.
package com.sap.aii.proxy.framework.core does not exist even though i have added this into the JRE path in NWDS. Do i need to import the same version file somewhere into J2ee server or somewhere else??
Regards,
Narpal

Hi,
javac ERROR: class file has wrong version 49.0, should be 48.0
This error means that the class file in question is being built with JDK1.5 (49), however it should be built with JDK1.4.2 (48).
In other words, as per the class the build expects a class file built with 1.4.2, but in your track JDK1.5 is configured for the build tool.
You need to therefore :
A.) review the CBS service settings, as most likely the parameters BUILDT_TOOL_JDK_HOME and JDK_HOME_PATHS are set up improperly.
B.) plus the build variant is incorrect in the track in question.
I'll refer below to the corresponding points with the letters A and B.
Some more explanation on the error:
If you check any class file with a hex editor, you'll see at the beginning of it this:
example: CA FE BA BE | 00 00 |00 31 ...
JDK 1.6 = 50 (0x32 hex)
JDK 1.5 = 49 (0x31 hex = (161)*3 + (160)*1 = 49)
JDK 1.4 = 48 (0x30 hex)
JDK 1.3 = 47 (0x2F hex)
JDK 1.2 = 46 (0x2E hex)
JDK 1.1 = 45 (0x2D hex)
On the first 4 bytes there's a magic number (CAFEBABE) which ensures this is a java class file, then on 2-2 bytes you'll see the minor and the major version (in this order). In the above example 00 00 | 00 31. This is what displayed as major.minor i.e. 49.0 what you can see in error messages. See also the attachment I've put to this thread minormajor.JPG.
More information on the class file structure:
http://java.sun.com/docs/books/jvms/second_edition/html/ClassFile.doc.html
For point A)
See the guide for doublechecking the CBS parameters
help.sap.com u2013 CBS Service Properties
http://help.sap.com/saphelp_nw70/helpdata/EN/53/75b3407e73c57fe10000000a1550b0/frameset.htm
Further explanation to the paramters
BUILD_TOOL_JDK_HOME and JDK_HOME_PATHS
BUILD_TOOL_JDK_HOME = <path to highest JDK>
JDK_HOME_PATHS = JDK1.3.1_HOME=<path of jdk131>;JDK1.4.2_HOME=<path of jdk142>;JDK1.5.0_HOME=<path of jdk150>JDK1.6.0_HOME=<path of jdk160>;default=<path of the JDK as default>
Some simple rules with examples:
- for BUILD_TOOL_JDK_HOME you simply enter the path to your JDK, e.g.: /opt/IBMJava2-amd64-142
- for JDK_HOME_PATHS you have to follow the scheme "key=value" e.g.: JDK_1.4.2_HOME=/opt/IBMJava2-amd64-142
- for BUILD_TOOL_JDK_HOME you always specify the highest JDK,
- for JDK_HOME_PATHS you list the available JDKs.
- JRE is not allowed, specify always JDK!
For point B)
Regarding the build variant in your track: check the page 13 for the paramter com.sap.jdk.home_path_key as per the guide :
How To... Setup an NWDI Track for Composition Environment Developments
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7014086d-3fd9-2910-80bd-be3417810c6f
Summary:
A. The first part of the solution is then to doublecheck the CBS service parameters. CBS service must be restarted after changes.
B. The second part is to doublecheck the build variant in the track (see the Build Variants tab on the Track Data tab on the CMS webui - Landscape Configurator).
I recommend you to have
A) BUILD_TOOL_JDK_HOME = <highest available JDK, I recommend here to set the path to JDK1.5>
JDK_HOME_PATHS = JDK1.4.2_HOME=<path of jdk142>;JDK1.5.0_HOME=<path of jdk150>;default=<path of the JDK as default, set it to the same path as you did for 1.4.2_HOME>
B) set the com.sap.jdk.home_path_key in the build variant to 1.4.2_HOME, or leave it for the default. Do not forget to set this build variant explicitly for >= 7.1 tracks to JDK1.5.0_HOME
I hope this helps.
Best Regards,
Ervin

SAP AII 2.1 RULES and Activities

Similar Messages

Maybe you are looking for