SAP and Radio Beacon

Hello Experts!
If I needed some information on data exchange between SAP and Radio Beacon software what would be the best place to go? What would I start with?
Thank you,
Michael

Thank you, everyone!
I have been to their website. It looks like the program is not open for self-development as much as SAP is...
I would like, for example, to add a user-defined field to an inventory item in RB so it shows if an item was discontinued (Valid box checked off in SAP). However, it looks like adding a UDF would take a whole procedure on the software script level...
Another example would be this digital point issue - when RB works with the whole numbers of units, and the quantities in reality can be fractional...
Thank you,
Michael

Similar Messages

SAP SB1 and Radio Beacon

Some one worked before with SAP and Radio Beacon? I have a problem synchronizing the on hand field in both systems. They give me different quantity, at this time the system who gives me the correct quantity on hand is Radio Beacon how I can get SAP has the same quantity and change when the quantity on hand in Radio Beacon canges.
Any idea is good
Albert Torres

Albert Torres,
This has been a known problem with RB for years. I have worked on a few B1 RB projects.
Please take help from the RB support guys
Suda

SAP B1 Radio Beacon vms 54.11

Saludos.
Alguno a utilizado SAP B1 con Radio Beacon(Warehouse), ya que tengo un problema de sincronizacion en el campo de onHand por un lado SAP me da una cantidad y Radio Beacon me da otra diferente. llegé a pensar que SAP calcula la existencia basandose en el Inventory Journal pero no es asi por lo menos no con mis pruebas.
alguna sugerencia?
Alberto Torres
Edited by: Rui Pereira on Feb 23, 2009 5:06 PM
Edited by: Paulo Calado on Jun 11, 2009 2:10 PM
Edited by: Paulo Calado on Oct 21, 2009 3:39 PM

Hello,
Sizing guide is another good literature before made testing. you could download it from documentation resource center. my sizing guide Document version: 1.1 ‒ 04/30/2007 recommends :
1. server platform:
Microsoft® Windows Server 2003 R2 Standard/Enterprise 32bit
Microsoft® Windows Small Business Server 2003 R2 Standard/Premium Edition
Microsoft® Windows Server 2003 SP1 Standard/Enterprise 32bit/64bit
Microsoft® Windows Small Business Server 2003 SP1 Standard/Premium Edition
2. Supported database platform
Microsoft® SQL Server 2005 SP2 Standard/Enterprise Edition 32bit/64bit (only on Windows 2003 Server)
let me check also whether SBO 2007A works in the system. Have you upgraded the PL 05 to PL08 ? I've heard it is available.
Rgds,

What exactly does the Radio Beacon Indicate

I have seen cases where the Radio Beacon is black and when it is gray. When it's black you may or may not be able to go through the wireless router to the modem and then to the internet. When it is gray, you cannot really do anything except be in a local mode. However there are instances when the Radio Beacon is black, rather than gray, and you still cannot access the internet. So, what exactly does the activated Radio Beacon Indicate, i.e., that the wireless network is working and the modem is down, or something else entirely ?

Assuming you're referring to the Airport icon in the menu bar, 'clear/empty' means Airport is turned off, gray bars means Airport is on but not connected to a network, and black bars means Airport is on and connected to a network. Other possible icon states are solid gray with a little computer inset, meaning you're connected to a computer-to-computer created on the Mac, and gray bars with an exclamation point (10.6 only), meaning connected to a network but not authenticated (e.g. wrong password for an 801.2X corporate/university network).
To your question, it's perfectly possible to be successfully connected to a network (black icon) and unable to access the internet. Situations like that would include the network requiring a proxy server, for which you haven't set up the details on in Network Preferences, or you're connected to an open network that requires you to enter information or agree to terms (e.g. a hotel network, where you need to put in your room number and agree to the charges before you can connect to the internet).

Follow up on JB versionJRO03O and radios i515.10 vFF02/ I515. FG02

JB versionJRO03O and radios i515.10 vFF02/ I515. FG02
The developers i know who have been using this versionof JB and new radios report everything seems to be working great no lost signal or dropped calls
looks to be ready for primetime now we need verzion to push to all . But i suspect S3 will gt JB first
This is an official OTA but only released to those who had 76Q ICS.
With a little research you will see how well it works

Android police is where I have found most with links to the needed
software.
On Sep 6, 2012 9:00 PM, "mariomerendino" <[email protected]>

Using ale u can send from sap to sap and sap to non sap systems

hi,
using ale u can send from sap to sap and sap to non sap systems,
then what is diff b/w ALE and EDI

Hello KALYAN KUMAR,
Application Link Enabling (ALE)
1.You distribute data using ALE if you want to communicate from one system to one or more other (mostly internal) systems.
2.ALE transfers data in IDoc format and uses the methods of tRFC for data transfer.
3.ALE enables the integration of business processes across several SAP or non-SAP systems.
Electronic Data Interchange (EDI)
1.You use EDI if you want to exchange business application documents with an (external) partner system (for example, a customer or vendor).
2. The SAP system sends EDI messages in IDoc format to an EDI subsystem, where they are converted to a universal EDI standard (UN/EDIFACT or ANSI/X12).
3. This enables communication with non-SAP systems.
By definition, two partners are involved in the process in an EDI application scenario: The sender and the recipient of an EDI message
I hope u understands the difference:)

SSO for SAP and Non-SAP applications without Enterprise Portal

Dear all,
Is it possible to implement SSO for both SAP and non-SAP applications without involvement of EP at all?
I have gone through this link.
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/e5/4344b6d24a05408ca4faa94554e851/frameset.htm">http://help.sap.com/saphelp_nw04s/helpdata/en/e5/4344b6d24a05408ca4faa94554e851/frameset.htm</a>
But I still i am not able to get the precise answer on how to enable SSO for both SAP and non-SAP applications without EP.
We have decided not to implement EP in first phase of SAP implementation. But we need to enable SSO for other SAP and Non-SAP applications.
A detailed description on how to deal this kind of scenarios will be helpful.
Thanks.

A client of our's uses SAP Enterprise Portal, and is using the SAP SSO, which is implemented with tickets, and requires the use of SAPSECULIB. My company provides an application for this client, and our application in hosted in our data center for the client, as a Software as a Service application, obviously across the internet. Our client, which owns a SAP license, has asked that we support the SAP SSO as a non-SAP SSO application. The client user's SSO ticket will be created from SAP EP, and then passed across the internet to our application, and we are to use that SSO ticket as an authentication ticket to our application. I beleive I know how to do this work technically, having reviewed the SAP document named: "Dynamic Library for Verifying SSO Tickets in Third-Party Software" Specification Version 2.00 December 2005.
My question is, does my company have the right to use the SAPSECULIB? Where is the official download and license download, that indicates we can download this library, and use it to support a SAP customer? We do not own a SAP license. Thank you for your help. I have searched many places in SAP support.

How to upload data from excel to SAP and options to be used

How to upload data from excel to SAP and options to be used
thank you,
Regards,
Jagrut Bharatkumar shukla

Hi Jagrut,
You can use gui_upload.
chk the sample program mentioned below.
REPORT ZFTP .
DATA: BEGIN OF I_FILE OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE.
DATA: BEGIN OF I_FILE2 OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE2.
DATA: W_COUNT TYPE I.
PARAMETERS: P_FILEN TYPE STRING,
P_FILE2 TYPE STRING,
P_NUM(4) TYPE N..
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILEN.
PERFORM F_FILE_GET USING P_FILEN TEXT-G01.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE2.
PERFORM F_FILE_GET USING P_FILE2 TEXT-G01.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = P_FILEN
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = I_FILE
IF SY-SUBRC <> 0.
MESSAGE E024(Z1).
ENDIF.
LOOP AT I_FILE.
W_COUNT = W_COUNT + 1.
IF NOT W_COUNT > P_NUM.
MOVE I_FILE TO I_FILE2.
APPEND I_FILE2.
ENDIF.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = P_FILE2
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
tables
data_tab = I_FILE2
FIELDNAMES =
*& Form F_FILE_GET
text
-->P_P_FILEN text
-->P_TEXT_G01 text
FORM F_FILE_GET USING L_FILENA L_TEXT.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = ' '
DEF_PATH = ' '
MASK = ',.,*.TXT.'
MODE = 'O'
TITLE = L_TEXT
IMPORTING
FILENAME = L_FILENA
rc =
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward if helpful.
Regards,
Harini.S

Data Reconciliation b/w SAP and BW

Hi Experts,
We have some BW reports for FI-CA for cleared items and the values on BW are less than what we have in the SAP Table.I tried reloading the data but it didn't helped.How can I resolve this data inconsistency b/w SAP and BW? Please advice
Thanks in Advance
Renny

Dear Renny,
1) Identify the data source used
2) Use transaction RSA3 in BW and R/3 for this datasource.
3) Try to test data for a month say May 2007
4) If it is the same, may be you are not using proper selection conditions in the Infopackage.
If it helps even a bit, do allocate *points
regards
Vinay

How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?

Hi,
How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?
I tried with acual method as below from client '000':
DELETE FROM USR02 CLIENT SPECIIED WHERE BNAME = 'SAP*' AND MANDT = '001'.
After this when I tried to logon '001' using SAP* with password PASS it is giving the message that Incorrect logon and password.
(Also when I checked for 'SAP*' in 001 it looks like it is not got created as I queried as below:
SELECT SINGLE * FROM USR02 CLIENT SPECIFIED WHERE BNAME = 'SAP*' AND MANDT = '001'.)
Can anybody throw some light on this? RewardS is guranteed for solutions!
-B S B

Hi again:
I forget to tell.
You must restart the system. So, that a new user with the name "sap*" gets generated with password "pass"
Hope this wil help,
Eric

Data to be fetched from legacy system to SAP and doc needs to bee posted

Hi Experts,
I have a requirement where my client is using some application in Legacy system(Fuel Software) which receives fuel(Petrol, Deasel, CNG) in system and issue the same to company owned vehicles and wants that sap should be integrated and document also needs to be posted in sap for all the receivings and isssuences against their vehicles.
Process Designed is:
1. Required Data file will be picked from legacy system with some date stamp and will be placed in sap directory.
2. There will be batch job which will check for new file based on date stamp.
3. Will pick record n will pass to Goods_mvt_create bapi and then will post the document.
4. We have created Vehicles as Internal orders in sap and whenever any issue will be there internal order no will be captured.
5. By this way we are receiving and issuing in sap.
Now my problem is i am stuck in designing step 1 and rest 2,3,4,5 steps have already been designed and working fine. Need your help in step 1. Else you may suggest some better way-out but again want to mention rest steps are already mapped
Thanks in advance..

Hi Ashutosh,
You can use functions:
FTP_CLIENT_TO_R3
FTP_COMMAND
FTP_COMMAND_LIST
FTP_CONNECT
FTP_COPY
FTP_DISCONNECT
FTP_R3_TO_CLIENT
FTP_R3_TO_SERVER
FTP_SERVER_TO_R3
FTP_START_REG_SERVER
FTP_START_SAPFTP
FTP_STOP_REG_SERVER
FTP_VERSION
which allow you to connect from SAP ERP to any FTP server (if the legacy has it). You can validate the sample program RSFTP007.
Regards,
Juan

CR2008 connectivity issue with BOE Universes(sap and non sap universes)

Hi Experts !!
Recently we tried to build/connect to a Universe in Crystal Reports2008 via 'Make a new connection tab'.
The universes are of SAP BW or non SAP Lying in BOE Servers and we are trying to build reports on them by conncting/utilizing the universes as a database for Crystal Reporting.
Our issue is most of the time we are not able to connect to the Universes and the connectivity blows out by some 'communication Error' thing initially.
While at some other points in time, the connectivity takes us to the Universe and we are able to select few characteristics and key figures from the Universe but the moment we go futher and try to run by pressing 'OK' button it blows out and say' LOGON FAILED'.
Apparantly, it is an connectivity issue with BOE server and from the different blogs it looks like it is a known issue for long.
The proposed issue resolution were like either CR2008 should be SP2 with BOE SP3 or there should be some additional .dll files defined in the paths in case of MSSQL database. None of this applies to us as we are on CR2008 with SP3 and going back to SP2 is probably not a viable option for us, and we are using Oracle as underlying database in this specific case.( i would like to tell you here that we are able to connect to Oracle Database directly though).
We have raised a message with SAP and was just wondering if we do have some solution/workaround already available to this known issue in place please?
Thanks&Regards.
Edited by: AMIT GHILDYAL on Aug 1, 2011 2:41 PM
Edited by: AMIT GHILDYAL on Aug 1, 2011 2:44 PM
Edited by: AMIT GHILDYAL on Aug 1, 2011 3:14 PM

Hi Amit,
Moved to Universe Forum.
If you have a case logged then no point posting here also, this is a public site and not a case management tool.
Once you do get the solution from your case please post it here also to help others if they have the same problem.
Thank you
Don

How to use Checkbox and radio buttons in BI Reporting

Hi BW Experts,
My Client has given a report in ABAP format and the report has to be develop in BI.It contains Check boxes and the radio buttons. I dont know how to use Checkboxes and radio buttons in Bex.For using this option, do we need to write a code in ABAP.Please help on this issue.
Thanks,
Ram

Hi..
Catalog item characteristic
- Data element
- Characteristic type
Entry type
List of catalog characteristics
Designer
Format (character)
Standard characteristic
Alternative: Master characteristic
(used for automatic product
assignment)
Simple entry field
Alternatives:
Dropdown listbox or radio button
list

How to realize Checkbox and Radio Buttons based on Attributes in JHeadstart

Hy@ all,
I try to redevelop the Summit Forms Demo in ADF.
The module "ORDER" contains, among other things, a checkbox and radio buttons based on database columns(VARCHAR2).
The column(checkbox) named PAYMENT_TYPE contains the values CASH and CREDIT and the column(radio button) called ORDER_FILLED contains the values Y and N.
After creating the business components, I set in JHeadstarts Application Definition the Display Type of these two attributes to checkBox and radio-horizontal.
I created a dymanic domain for the radio-horizontal and a static domain for the checkBox.
The radio-horizontal within the dymanic domain works nearly correct.
I set the Data Collection in this dynamic domain to the required Group and the Value and Meaning Attribute to the necessary Attribute.
Within the JSF- Page the values are shown right but unfortunately there are too many radio buttons available. Instead of displaying the two radio buttons CASH and CREDIT were many CASH and CREDIT radio buttons shown.
I can´t find any solution for this case.
The problem with the checkBox is that therfore a static domain is required but I want to show the value of the checkBox based on the described attribute, like the handling of the radio horizontal.
But I don´t know how to implement this, if it is possible.
I´m using JHeadstart v10.1.3.2 and I´m pleased about any reply or solution.
Best regards
Chris

Chris,
If you run the application module tester, and query the view object usage underlying your dynamic domain, how many rows does it return? It should return only two rows, one for CASH and one for CREDIT. If more than two rows are returned, your query is wrong.
What is the problem with using a static domain for the checkbox?
Steven Davelaar,
JHeadstart Team.

Communication between non SAP and SAP

HI,
do you have some information about communication between non SAP and ERP (WebAs) SAP System ?
I would like to receive an xml file or xml IDoc from a Java Plattform (non SAP) into our SAP ERP System as an own defined IDoc.
remember: we don´t have a converter like XI.
What about using a proxy (do you have some information/blog how to use that) ?
What about using a webservice (do you have some information/blog how to use that) ?
What about storing the xml on the application server (do you have some information/blog how to use that) ?
How to transform xml to IDoc ?
other methods ?
Thanks for your help.
Gordon

Here is a link to connecting MS SQL Server with SAP using Open Hub connection.
http://msdn.microsoft.com/en-us/library/dd299430(SQL.100).aspx
This might give you some insight into connecting with Non SAP Systems.
I have used the information from this link to export data from SAP to MS SQL Server.
Good Luck.
MP.

SAP and Radio Beacon

Similar Messages

Maybe you are looking for