SAP AND SYSTEM I JOURNALS

Dear Experts,
I am having some issue on SAP journals on system i . While clearing the Journals some of the Receiver are not getting clear. We have to shut down the SAP and restart it after which we can clear the same. I also want to know that is there is any built in (Automated) process in SAP to clear the Receivers where we can specify the number of days which a receivers should stay in the system.
Pls note that these receivers are of very large size and take huge space in the system.
Pls advise to clear ths problem..
Thanks & Regards
Rajesh.

Hi Rajesh,
journal receivers can only be deleted when all transactions that caused entries in the receiver are either committed or rolled back. If you have very long running transactions (like batch processing), it is possible that several journal receivers are created and filled before the transaction is committed. When you shut down the SAP system, no transactions remain uncommitted, that's why you can delete all receivers (except the currently attached on) then.
There are a couple of SAP Notes that deal with journal receivers, SAP Note 82079 has a tool to automatically save and delete receivers. If your problem happened while installing a support package, then have a look at SAP Note 1366799. General information about journal configuration can be found in SAP Note 1449715.
Kind regards,
Christian Bartels.

Similar Messages

Upload Opening balance of G/L accounts from legacy system to SAP, and also

Hi Gurus,
How to upload Opening balance of G/L accounts from legacy system to SAP, and also Vendor and Customer balance.
My Doubt is when you upload the customer balance and vendor balance will it effect the sundry debtor account and sundry creditor account if not the how will the sundry debtor account and sundry creditor account will be posted with the balance. Please send me the general entry passed for posting the same.
What I understood is that when we are uploading the customer and vendor balances through LSMW, no entry will be passed and it will update the customer and vendor sub ledger in FBL1N and FBL5N but it will not affect the sundry debtor account and sundry creditor account.
To give effect to sundry debtor account and sundry creditor account we need to manually pass a journal entry as follows.
1) Sundry debtors account A/c -
DR
      TO clearing account A/c
2)     clearing account A/c -
dr
     Sundry creditor account A/c
Please let me know whether iam correct
Also please tell me what will be the scenario for uploading of the assets balances through LSMW.
THANKS AND REGARDS
MV

Hi,
     When you uploading any data from legacy system to sap normally we will be using LSMW or BDC,thru this we will be uploading master data like G/L,vendor,Customer and asset master these are the some examples and we will upload transaction data also that is P&L Account and Balance sheet.When we do uploading data thru LSMW system will update all the values of vendor,customer and asset values as well as subsidary ledger also.No need to do manully.
Regards,
satya,
FICO

Duplicate Journal Entry and system crash

Hi All,
Just wondering anyone experience when duplicate the journal entry and change the posting date and system will just hang and follow by crash?
Please advise.
Best Regards,
Foong Yee

Hi Foong Yee Tai...
Check with the Following SAP Note...
1616687 - B1 shuts down when updating amount in Journal Entry
Regards
Kennedy

Using ale u can send from sap to sap and sap to non sap systems

hi,
using ale u can send from sap to sap and sap to non sap systems,
then what is diff b/w ALE and EDI

Hello KALYAN KUMAR,
Application Link Enabling (ALE)
1.You distribute data using ALE if you want to communicate from one system to one or more other (mostly internal) systems.
2.ALE transfers data in IDoc format and uses the methods of tRFC for data transfer.
3.ALE enables the integration of business processes across several SAP or non-SAP systems.
Electronic Data Interchange (EDI)
1.You use EDI if you want to exchange business application documents with an (external) partner system (for example, a customer or vendor).
2. The SAP system sends EDI messages in IDoc format to an EDI subsystem, where they are converted to a universal EDI standard (UN/EDIFACT or ANSI/X12).
3. This enables communication with non-SAP systems.
By definition, two partners are involved in the process in an EDI application scenario: The sender and the recipient of an EDI message
I hope u understands the difference:)

Data to be fetched from legacy system to SAP and doc needs to bee posted

Hi Experts,
I have a requirement where my client is using some application in Legacy system(Fuel Software) which receives fuel(Petrol, Deasel, CNG) in system and issue the same to company owned vehicles and wants that sap should be integrated and document also needs to be posted in sap for all the receivings and isssuences against their vehicles.
Process Designed is:
1. Required Data file will be picked from legacy system with some date stamp and will be placed in sap directory.
2. There will be batch job which will check for new file based on date stamp.
3. Will pick record n will pass to Goods_mvt_create bapi and then will post the document.
4. We have created Vehicles as Internal orders in sap and whenever any issue will be there internal order no will be captured.
5. By this way we are receiving and issuing in sap.
Now my problem is i am stuck in designing step 1 and rest 2,3,4,5 steps have already been designed and working fine. Need your help in step 1. Else you may suggest some better way-out but again want to mention rest steps are already mapped
Thanks in advance..

Hi Ashutosh,
You can use functions:
FTP_CLIENT_TO_R3
FTP_COMMAND
FTP_COMMAND_LIST
FTP_CONNECT
FTP_COPY
FTP_DISCONNECT
FTP_R3_TO_CLIENT
FTP_R3_TO_SERVER
FTP_SERVER_TO_R3
FTP_START_REG_SERVER
FTP_START_SAPFTP
FTP_STOP_REG_SERVER
FTP_VERSION
which allow you to connect from SAP ERP to any FTP server (if the legacy has it). You can validate the sample program RSFTP007.
Regards,
Juan

Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interfa

Hi
i am try do
Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interface
With The help of SDN Contribution
link----
( have look on it)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4943f2b7-0a01-0010-37af-faff35b2f08c
I am getting error in
Partner system as HTTPLOG and "Execute" to check the results
Error is -- Port could not be created
RFC destination HTTPLOG Not specified for system HTTPLOG
any 1 have any idea if plzzzzzzzz...........
Thank u
Ram

Hello .
we are also in process of implementing the same
could you share the knowledge pl?
1)is it a separate add on with ALE to saphr
or using ECC ??
2)can u share the configuration part ??
we are trying it on webas as addon 3.0 .

Adjustment of inventory between SAP and Legacy system

Hi Gurus,
Here is the scenario:
1) One plant within a company code is in SAP and the other plant in a same company code is still in legacy. Since both of them are Not in SAP, I cannot do an STO. But, ROH materials need to be moved from the legacy plant to the plant in SAP. I cannot treat the legacy plant as a Vendor, since we are Not paying them. But, still, we should make sure that the inventory needs to be devaulated by the monetary value of the goods taken out and the other inventory (plant in SAP) needs to be enriched by such monetary value.
2) Similar situation as above, but between 2 Company Codes of same controlling area. Here one Company Code is in SAP, other is in legacy, but, when the other company code will be in SAP, it will be under same controlling area. The two companies are under one business. Some type of intercompany transfer (netting) needs to be done. Here, I have to treat the legacy company as a Vendor.(but modifying bank details)
I understand, that it may not be possible in standard SAP, but what type of custom developments should I put up ? Any type of custom movement types? How should I set up the Vendor Master (in case of second scenario, the bank details to involve the netting thing).
Any type of information is very valuable and I would be indeed very grateful.
Thanks,
Kumar

For requirement 1, I suggest you keep track of the inventory acct for legacy and SAP system as separate acct to simplify reconciliation. Once this is done, you can use transaction MB1C movement 561 (or a copy of this movement type). This movement allows you to enter transaction amount in local currency as well; if this is not available, you can customize this through configuration for field selection of movement type (OMJJ). So through this posting, you can enter corresponding material, plant, quantity, and transaction amount that's passed from legacy system. In the account determination, you can set the opposite entry for inventory acct as the inventory acct from legacy system.
You can then setup an interface that periodically extract GI txn on legacy system, and another interface that performs BDC or call transaction on movement 561 (or a copy of this movement) on SAP system
Revi

Upload of Campaign and Leads from flat file into SAP CRM system

Hi Gurus,
We need to upload Campaign and Leads from our legacy systems to SAP CRM systems. The source data will be available in the form of flat files (tab delimited)
Please let me know the possible ways of doing this.
Reward points are assured.
Thanks in advance.

Hi
you can use external list management functionality in CRM 5.0 useing the flat file tab delimited you can upload the contacts and create business partners followed by lead transaction types with business partners created and also external list management will allow you to create target groups for executing the campaigns in SAP CRM
please do reward points if helpful
regards
Dinaker vikas

Connectivity between SAP ECC system and SAP BI

Connectivity between SAP ECC system and SAP BI
Hi BI-experts!
I would like to load e.g. transaction data from SAP ECC system into SAP BI system.
The Loading process is hanging in processing step u201CSERVICE APIu201D.
The process in hanging in status "yellow" and then changed after a while to status u201Credu201D.
[0FI_AR_4 |http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html ]
The following steps within Load process are yellow and then red:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one tell me whether my distribution model or other settings are wrong?
I created 2 distribution model (BD64), one from SAP BW system and other from SAP BI system with message types RSRQST, RSINFO, RSSEND
Thank you very much!

Hi Holger.
this issue is related to the RFC but not the one which is communicating from BI to R/3 rather the one which is communicating from R/3 to BI follow these steps.
1. check your BI system logical name from the myself source system.
2. go the ECC and run the transaction sm59
3. go the ABAP Connection folder and search for your RFC which name would be by default as per your BI logical system name.
4. double click it and edit it now check whether the Target hostname or ip is OK.
5. In the logon tab check the client number User and password settings.
Save it and test it with both Connection Test and Remote Logon.
if every thing work fine i hope your problem will be solved.
kind regards,
Zeeshan

SAPCONNECT - RFC between SAP BW system and Mail Server

Hello Everybody,
Iam trying to enable <b>Information Broadcasting</b> feature in SAP BW System i.e; i want the queries to be send to users from BW system to their Email Ids for which i have made configurations for SMTP node in SICF and SCOT transactions.My problem is that do i need to create an RFC between BW system and Mail Server ,if yes iam not getting the way to do this and wt all parameters need to be set there .If somebody can plz guide me with the parameters that need to be set for SAPCONNECT or send me some good guide which details the creation of RFC ,I shall be highly obliged.Iam struggling with this issue since many days,You can send the guide to me on my email Id [email protected] .Your help shall be of gr8 support.Kindly revert at earliest.
regards,
Saumya

Hi,
My understanding is -
you need to following setting to send mails-
http://help.sap.com/saphelp_nw04/helpdata/en/66/9c25413fabef23e10000000a155106/content.htm
Need this, if planning to use fax, SMs etc-
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/content.htm
hope it helps
regards
Vikash

Interface between Microsoft Project and SAP Project Systems

Hi,
When we update SAP Project systems from Microsoft Project, our users want to swap values between project nodes id and description. Is this possible? Which BAPIs are used by OpenPs? I am trying to find a user-exit where I can swap these values.
Thanks in advance.
Regards
Jitendra Pongurlekar

Refer Note 579761. This can provide you some hint.
Regards
Sreenivas

Acknowledgements between SAP and Webservices systems

Hi , I have integrated a SAP and legacy system ( with webservices ) . I woul dlike to know how i can enchance the integrations with acknowledgements . It would be nice if both the systems know what happened to their sent message. I have gone through the document 'how to handle IDOC acknowledgements' . It only talks about sender and receiver systems being sap systems.
Any design ideas with acknowledgements ? The Syncronous calls are fine cos they get back a response. I would like to know how to deal with IDOC acknowledgemnts and the response from the webservice interface.
Thank you
Sudheer

>>It only talks about sender and receiver systems being sap systems.
No it doesn't talks only about SAP-SAP system.
the last section(i guess last 2-3 pages) explain acknowledgment in case of legacy-SAP system
Please check the last section of that .pdf
Thanx
aamir

PI Integration between SAP ERP system and Cloud for Customer

Hi,
We have set up integration between Cloud for Customer tenant and our SAP ERP system via PI.
For performing initial load, when we try to activate change pointers for Message types in the SALE transaction, we don't find the MATMAS_CFS and DEBMAS_CFS in the ERP system(IDES ECC 6.0 EhP6).
CODERINT 600(SP1 &2) are installed and BC set COD_BYD_ERP_INT is activated in the system.
Could anyone let us know what are we missing here, so that we can get the message types.
Also we tried using Message type MATMAS for sending a message from ERP to Cloud for Customer. In PI message monitoring, the status shows as 'Processed successfully', however we do not find the message in Business Communication Monitoring in the Cloud system. neither do we see the Business Object created for that Material master.
Please let me know how to debug such a scenario.
Regards,
Sangeeta

Hi Vatsav,
Yes the outbound works now with the following urls with channel id as param. With the 'BusinessSystem used as the sender(COD) business system ID. Thanks for your help and the document
Customer Replication
/XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessPartnerReplication_Send
Customer Address Replication
/XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessPartnerAddress_Send
Customer Contact Replication
/XISOAPAdapter/MessageServlet?channel=:<business system>:COD_SOAP_BusinessParterContact_Send
Regards,
Sangeeta

Intigrating SAP and Non-SAP system for recruitment process

Hi All,
Our Client has a requirement which is related to Recruitment.The requirement is that the employee resumes ,photos and credentils are stored in legacy system.The shortlisted resumes sud be transferred into SAP and the hiring process sud be done in SAP.After the hiring process , the status of the applicants sud be triggered in the legacy system and not in the SAP system.
Is there any Standard BAPI's for this requirement. Any Workflow is involved in this requirement.
As a HR Abaper i need to give the complete technical details for this requirement. Pls advice me on this .This is very urjent.
Points will be awarded.
Many Thanks,
Chakradhar Maddina

what is this 3rd party application?
if anyways they are using SAP for masterdata, why dont they use the same for applicant data?
ok for whatever the reason they have decided that..only way looks like is to do it manually,
create a bdc/lsmw for the hiring process and let them use it regularly for hiring all the selected applicants in a single go.
as for updating their system with the updated status, again i think they should do it manually.or maybe if their legacy system allows mass data update/chages.
becoz you do the creation of BDC/LSMW only once not everytime you want to hire.. i think its an easir process. also wait for other experts to give their feed back you may get some valuable info.
hope it helps

Extract data from SAP and send to external system via Webmethods & IDOC's

Hi,
We need to Extract data from SAP and send to an external system via Webmethods middlewear using IDOCs. I have never used webmethods before and would like to know more about how to implement this scenario. I have used IDOCS in an EDI scenario before but not used it along with WebMethods.
Any pointers would be of great help. Thanks

If you have already ABAP programs /BAPI's in place then try to develop RFC interface and write some back ground programs to scheudl BAPI's and develop scenario but you need to implement error handling , data validation in PI mapping level.
or
take help from ABAPer to design in ABAP like writing Proxy program to pull data and send it PI.
if you are dealing with master data bit risky(correctness) but can be achived using PI.

SAP AND SYSTEM I JOURNALS

Similar Messages

Maybe you are looking for