SAP and WINDOWS NT folders not there in Authentication under CMC

Hello All,
I recently installed BOJ Enterprise 3.1 SP3 and also installed Integration kit 3.1 SP3 in Linux_x86. In the initial logon screen i can see the SAP and WINDOWS NT in the drop down in the Authentication. But after selecting the Enterprise option to login CMS I selected Authentication to configure the BW Backend system but i cannot see SAP folder or Windows NT option. I cn only see Enterprise and LDAP option those are by default comes along with BOJ Enterprise 3.1.
Can anyone tell me why Iu2019m not able to see SAP and Windows NT in the CMS HOME --> Authentication
I'm able to publish BW but RFC also failing after creating using PROGRAM ID.
Any suggestions are appreciated
Thank you,
Vijay Reddy

When the CMS is on unix/linux the NT and Ad plugin are not loaded, it seems some sort of mistake that the dropdown appears for either of them.
On the SAP side if you don't see the plugin it indicates the integration kit or jco arenot installed properly/completely. That should work on either platform.
Regards,
Tim

Similar Messages

I sometimes have blue and red square-shaped dots appear on my MBP; especially but not exclusively when I'm watching videos. The dots don't stay in the same place; and also they are not there all the time.

I sometimes have blue and red square-shaped dots appear on my MBP; especially but not exclusively when I'm watching videos. The dots don't stay in the same place; and also they are not there all the time. Also, sometimes my animations (applications opening, windows being dragged, etc.) will glitch as well. Again, this is not a continual thing; it just happens variously throughout my day. MBP Model A1212, OS X 10.6.8, 2.33 Ghz 3GB RAM.

Did the original songs that do not appear on the car player play in the Music app on the iPod? Sometimes glitches happen and they do not. Also, If y ohave a 5G iPod/iOS 7, purchase songs will show with an cloud icon by them if they are not downloaded if Shall All is turned on in Settings>iTunes and App Store

When I reply to an email, instead of sending it to the recipient, it sends it back to me. I've checked the sent mail folder and the reply is not there either.

When I reply to an email, instead of sending it to the recipient, it sends it back to me. I've checked the sent mail folder and the reply is not there either. Replying used to work fine, but all of my replies are sent to my inbox, instead of going to the recipient. I've made sure that the recipient's email address is in the send to box.

Read please this posted by Tanzim
Cause of the issue
Gmail webmail accounts do not have separate sent items and inbox folders. The Gmail account web page contains a Sent Mail link on the left side, but this is not a separate folder from the inbox. Gmail webmail messages are grouped into conversations, resulting in all sent messages and replies from others appearing as a single email message entry in the inbox. This allows for easy reading and viewing on the Gmail web page, but, when integrated with the BlackBerry Internet Service account, results in copies of sent email messages arriving on the BlackBerry smartphone as new email messages.
Resolution
To prevent sent messages from returning to the BlackBerry smartphone each time, create a filter in the BlackBerry Internet Service account to block the sending of those messages to the BlackBerry smartphone.
To create a filter, perform the following:
Log in to the BlackBerry Internet Service account. For instructions on how to log in to the BlackBerry Internet Service account, see KB03781.
Click the Filters icon next to the integrated Gmail account.
Click Add a Filter to create a new filter.
Configure the filter so that email messages are not sent to the BlackBerry smartphone if the email message originates from the Gmail webmail account integration:
Type a name for the filter into the Filter Name field. For example, My sent Gmail email messages.
Set the Apply filter when field to "FROM" field.
Type the Gmail webmail address into the Contains field. For example, <user name>@gmail.com>.
Select the radio button beside Do not forward messages to device.
Click Add Filter.
Note: After creating this filter, email messages will not be received on the BlackBerry smartphone if sent from the Gmail webmail account.
Source: KB10332 (with graphical depiction)
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

The message icon is not showing in the drop screen of my photos it used to show before and now it's not there how can I get it back?

The message icon is not showing in the drop screen of my photos where it says do you want to email, message, assign, use as waller paper etc. it used to show before and now it's not there how can I get it back?

Did this back along to mine. Plug it into itunes on your pc (or Mac) and click on the ipod icon on the left hand side. When the device options come up on the main screen, click on restore. Follow the steps and it should restore to factory settings. If you had icloud activated on the ipod all previous purchases should be in the cloud and ready to download onto the ipod afte rit has been restored to factory settings, otherwise you'll have to download them all again. Hope it helped.

I recently lost my iphone to which had of alot purchased music on it, but when i've come to retrieve the music from my itunes and the music is not there? The purchases show on my history but the music is nowhere? How can i get my purchases back please?

I recently lost my iphone to which had of alot purchased music on it, but when i've come to retrieve the music from my itunes and the music is not there? The purchases show on my history but the music is nowhere? How can i get my purchases back please?

By any chance, did you have the Find My iPhone app installed prior to it being stolen?
Reporting a lost or stolen Apple product
Hopefully you had your iTunes purchases backed up to an external source such as an external drive or CD's?

I just purchased Adobe Acrobat Standard DC andf upgraded from Acrobat XI. When I instalkled it on my PC the print Production Tools were there and functional. I installed it on my Laptop and those tolls are not there. What do I need to do to have Print Pro

I just purchased Adobe Acrobat Standard DC andf upgraded from Acrobat XI. When I instalkled it on my PC the print Production Tools were there and functional. I installed it on my Laptop and those tolls are not there. What do I need to do to have Print Production Tools on both computers?

This is quite odd. I wonder if you could try something for me on EACH computer.
Use Help > About Adobe Acrobat DC.
At the top of the box it should say Adobe Acrobat Pro DC or Adobe Acrobat Standard DC.
On each of the two machines, what does it say? (I think something odd has happened)

I updated my iphone and lost all my notes there is lots of important notes, how can i get em back especially that on itunes when i sync my iphone a note appear that there is no back up on icloud,and i cannot restore?

i updated my iphone and lost all my notes there is lots of important notes, how can i get em back especially that on itunes when i sync my iphone a note appear that there is no back up on icloud,and i cannot restore?

Without a backup on iCloud, there needs to be another device using the same @icloud address that is syncing to the notes. Without that, there is no way to go back in time to create a backup before performing a major update.

In my Itunes library label: My Music albums content is missing even if I down loaded from a personal CD. I was trying to make up some playlists and the music is not there but the album title and tile is.anyone have any suggestions.

I have a Dell Desktop Optiplex 380 with Windows 7 operating system. regarding use of I-Tunes library and making playlists from "My Music"I went to My Music clicked on the album tile to drag to the new playlist and all of the albums are empty. Like the tracks are labeled but not there There is a note to go to the store and buy each track for 0.99. These Albums have been in the system for several years. where are they, and what happens to them. Do I need to import again. which could be a pain
Would appreciate any suggestions.
Thanks<
Flemcat

Hello Flemcat,
After reviewing your post, it sounds like you are missing content from iTunes library. I would recommend that you read this article, it may be able to help the issue.
iTunes: Finding lost media and downloads - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Safari in both MacOS 10.6.8 and Windows 7 will not open PowerPoint SlideShows but Firefox Will

Having Created a PowerPoint Slide Show I find that it cannot be shown with Safari neither in Mac nor Windows 7.
The error message in Windows 7 is: "WebKitErrorDomain error 102"
The error message in Mac OS 10.6.8 is "Frame Load Interrupted."
The exact same Slide Show is easily shown with Firefox 28.0 in the Mac and Firefox 27.0.1 in Windows 7

To start with, my computer is the late 2008 model Imac, has 3g of memory …
I'm assuming you mean the Early 2008 iMac since there is no "late 2008" one. AFAIK, it came with 2 GB of RAM standard & the common BTO option would have been 4 GB, so can we assume that you have installed an aftermarket memory module to get to 3 GB?
I've already had it serviced, and was told that the issue was resolved, and was unrelated to hardware. Fifteen minutes after repair and setup, the exact same symptoms occur.
What repair and setup? Is this something you did after getting the iMac back from service? If so, what exactly did you do?
I had no initial problems with the install of either os (mac or windows), except to note that I couldn't install the apple software updates on the windows side.
Do you mean the Windows drivers or something else? Did you follow the Bootcamp install procedure exactly when reinstalling Windows or not?
I switched back over to mac to look for and install a video firmware download that I had located through these same forums.
What video firmware download do you mean? AKAIK, there are none for early 2008 iMacs.
No offense intended, but it is hard to understand exactly what you have done because while you mention much, you don't say a lot about the specifics for a lot of that. In general, it is best to concentrate on those things & keep the commentary to a minimum.

Exchange IMAP Inbox and selected sub folders not displaying correctly

Hi All,
I hope you can help me with the following issue:
We are running MS Exchange 2003 with IMAP. Normally I connect from my Mac to the mail server (using IMAP), everything worked fine until two days ago. I began with a few messages not showing up in the inbox folder while I confirmed their existence via Outlook Web Access and Outlook running in my Virtual Machine. Following an advice I dig out in the forums (moving Mail folder and re-importing all messages) it got kind of worse, my inbox did not show up at all while OWA and Outlook still correctly display all messages. Same goes for a few of the user created folders, though most of them load correctly. I cannot identify any system why some folders display correct and others do not.
As far as I am aware I have followed all the advices in the forums (well, at least those I've found).
Any help would be very much appreciated.
Kind regards,
equinox

I have set up a new MacBook with the exact same details as I used on previous Pbk and on iMac 24 at work.
I can't receive/see anything in IMAP inbox on MacBook. I can send from the account ok.
I have set-up another white MacBook now and it has the very same issue. The only common difference is that the previous Pbk and the intel iMac operate 10.4 while the two MacBooks are on 10.5.6.
Is there a known issue with 10.5 and Mail/IMAP?
EDIT:
From looking at posts further back, I see that yes, there is a big ongoing problem with Mail and IMAP. But is there particularly an issue with 10.5?
BTW, POP works fine, using IMAP simply results in no incoming mail at all.
Message was edited by: DB1@mac

Impl.h header and snmp samples are not there

In Solaris9 the fiiles impl.h and the SNMP samples were not there....how can I get them into my system.
Thanks

Hi Krisjagan,
It’s just been declared Deprecated which means that there won’t be any more updates to this.
It is in fact available as a feature in Server 2012. Pasting some screenshots below from my Lab, you can refer the following related third party article to compare
your install step is same or not, and whether you configure firewall correct.
SNMP Extension Fails on Windows 8/Server 2012 when attempting network communication
https://support.microsoft.com/kb/2771908?wa=wsignin1.0
How to Install SNMP and Configure the Community String
https://support.managed.com/kb/a764/how-to-install-snmp-and-configure-the-community-string.aspx
For detailed information about how you change SNMP to WinRM, you can follow the msdn portal of Windows Remote Management.
http://msdn.microsoft.com/en-us/library/windows/desktop/aa384426(v=vs.85).aspx.
How to check if a SNMP Trap is received.
http://michelkamp.wordpress.com/2012/07/02/how-to-check-if-a-snmp-trap-is-received/
The similar thread:
Windows Server 2008 R2 or Windows Server 2012 SNMP Version Support
https://social.technet.microsoft.com/Forums/windowsserver/en-US/9211da18-cbfb-4adf-84be-43f8654767d1/windows-server-2008-r2-or-windows-server-2012-snmp-version-support?forum=winserverManagement
More information:
Windows Remote Management
http://msdn.microsoft.com/en-us/library/windows/desktop/aa384426(v=vs.85).aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

My iTunes is telling me that the registry settings are missing for importing and burning cd's and dvd's and to reinstall. I do reinstall and it is still not there and I have at least 4 times.

My iTunes is telling me that the registry settings are missing for importing and burning cd's and dvd's. I have installed the latest up as well as uninstalled and then reinstalled a few times, at least 4. The registry settings are still not there and I cannot burn to a cd. HELP!!!

To fix registry, refer to this article:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299

HELP!! Photoshop cs4 and Windows 8 - Printer Not Found

Just installed PS cs4 on my new all-in-one with Windoz 8 and my cs4 is saying that there is no printer installed. I can print from other sources like disks and picture viewer. Are there any fixes for this??? I REALLY don't want to purchase yet another license for cs6!

If you search Google using the terms "CS4 and Windows 8 compatibility" you can probably find various results from both Adobe and Microsoft that should give you some idea of how much of a gamble you might face in changing your OS.
In my own experience, a change in OS has yet to be a positive experience... while most people loved XP in its day, I suffered years of poor performance with it as an upgrade from the moment it was installed and regretted doing it. Maybe you've had better experience and aren't as shy of it as I am.

Upgrade to lion and windows 7 is not starting

I upgraded to lion and for the first time tried to run windows 7 since the upgrade and it does not work. It worked fine before but I'm not totally sure this is the cause of the issue. I have tried to restart windows half a dozen times but cannot get it to boot correctly. Working in the safemode isn't allowing me to boot from the windows disc to try and trouble shoot. I don't want to reinstall 7 if possible. Thanks for the help.

Hi,
Yes, I agree with Rick, something important must be broken during the process of installing the cloning program which causes the failure of all repair options, before the final option of reinstalling your system, refer to this link,
TrueCrypt Rescue Disk
http://www.truecrypt.org/docs/rescue-disk
when preparing the encryption of a system partition/drive, it should create a TrueCrypt Rescue Disk, which can be helpful when your
Windows is damaged and cannot start.
See this part:
If Windows is damaged and cannot start, the TrueCrypt Rescue Disk allows you to permanently decrypt the partition/drive before Windows starts. In the Rescue Disk screen, select
Repair Options > Permanently decrypt system partition/drive. Enter the correct password and wait until decryption is complete. Then you can e.g. boot your MS Windows setup CD/DVD to repair your Windows installation.
Note: Alternatively, if Windows is damaged (cannot start) and you need to repair it (or access files on it), you can avoid decrypting the system partition/drive by following these steps: Boot another operating system, run TrueCrypt, click
Select Device, select the affected system partition, select System >
Mount Without Pre-Boot Authentication, enter your pre-boot-authentication password and click
OK. The partition will be mounted as a regular TrueCrypt volume (data will be on-the-fly decrypted/encrypted in RAM on access, as usual).
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Regards
Yolanda
TechNet Community Support

Lady gaga album ARTPOP was there in the U.A.E [United Arab Emirates] iTunes store and now it's not there. Why ? there is a clean version of the music though.

it was there yesterday and today it's not when a new promo single got released called Do what u want please return the album.

I believe it is part of a research experiment at a German university. Everybody knows that nobody ever buys the Clean version of any album, except as a gift for a kid or as a mistake. Would anybody buy it if it were 4 euros cheaper? I am sure the results will appear in an academic journal.
Even in the USA iTunes Store, where the customers supposedly understand what Springsteen's lyrics are saying, there is only one version of the album.

SAP and WINDOWS NT folders not there in Authentication under CMC

Similar Messages

Maybe you are looking for