SAP APO DP CBF - Change data only at one level

Hello Guys,
I am getting error as "Change data only at one level".
I am getting this error while loading data in the planning book at product level (Details All on products).
I have a default macro in the data view. However, I am getting proper results when i do a details all on some other characteristic.
Any clue about these error message ?
Regards,
Jacky Jain.

Similar Messages

RemovingContext only for One level(Message Mapping)

Hi,
Is it possible to remove context only for one level?
For Eg:If I apply [RemoveContext] function to <Item>
I will get {A1,A2,B1,B2,C1,C2,C3,C4}
<SourceRoot>
<A>
<Item r="a">A1</Item>
<Item r="b">A2</Item>
</A>
<A>
<Item r="a">B1</Item>
<Item r="b">B2</Item>
</A>
<A>
<Item r="a">c1</Item>
<Item r="b">c2</Item>
<Item r="c">c3</Item>
<Item r="d">c4</Item>
</A>
</SourceRoot>
But I need only those coming under a particluar <A> .
Like {B1,B2}.
Any way to do this?
Can anyone help.
Thanks in Advance
Message was edited by: Chemmanz

Hi,
I was just trying to give an example. In my real case
SOURCE - INVOIC01 IDoc
TARGET - cXML Structure for Invoice.
When it goes to Line item level the complexity comes.
A similar situation as i explained needs to be solved.
[REMOVECONTEXT] helped me a lot.
But I this situation I want to restrict it to a single level.
For Ex:
<INVOIC02>
<IDOC>
<EIEDP01>
<EIEDP02 QUALF="001">.. </EIEDP02>
<EIEDP02 QUALF="002">.. </EIEDP02>
<EIEDP02 QUALF="0xx">.. </EIEDP02>
</EIEDP01>
<EIEDP01>
<EIEDP02 QUALF="001">.. </EIEDP02>
<EIEDP02 QUALF="002">.. </EIEDP02>
<EIEDP02 QUALF="0xx">.. </EIEDP02>
</EIEDP01>
</IDOC>
</INVOIC02>
1.<EIEDP01>
<=== mapped directly to ==> <InvoiceDetailOrder>
Then internal things are organized differently in
<InvoiceDetailOrder> compared to IDoc element<EIEDP01>
Ex:
I want to take all the <EIEDP02>s coming under one line Item <EIEDP01>
<EIEDP02> cannot be mapped diectly to cXML element. It can be done only after checking it's own attribute QUALF.
For this I applied [REMOVECONTEXT], but i am getting all the QALF values.
I need to restrict it to <EIEDP01> level.
Regards
Chemmam

Batch Change Date Only

I would like to change dates on a batch of photos, however when I go to do this, it prompts me to also change the time and gives me the option to add a certain number of minutes between each photo.
This is ridiculous. Very 'un-apple-esque'. I don't WANT to change the time, that is a seperate attribute. I want to change date, and that's it.
How can I do this?
It's as if I went into itunes and tried to change and artist name on a whole album and it also asked me to change the album name. Silly.
How can I change JUST the date of a batch of photos??
-Justin

Hi.
There's a plugin that may do what you want. Check out iPhoto Date Shifter from Joe's iPhoto Applescripts. I haven't used it myself but others here have reported that it works.
Regards.

Changing date format at reporting level

Hello,
Will u plz tell me how can i change the date format at reporting level?
I want to display date in dd/mm/yyyy, but by default its showing mm/dd/yyyy.
Delta is already loaded in the system, so i don't want to disturb regular data loading.
Is there any way so that i can change the format of date.
Plz help me out.
Thanks,
Regards,
Steve

Hi steve
There r so many postings on the same topic
go through these previous threads
date format
Date format
u can find solution
regards
Ravi Kiran

CS_WHERE_USED_MAT only returns one level

Hi all,
I need to get the results that CS15 (where-used) gives me when multi-level is checked.
I need to write a program and was hoping to use FM CS_WHERE_USED_MAT. However, this FM only returns the materials that are one level down. I'm on 4.5b.
Does anyone know what FM I can use that will give me the materials at all levels (like CS15 does). I can use CS_WHERE_USED_MAT and feed back in each material until I reach the end of the levels. But I was wondering if anyone has found a better way.
Thanks,
Mike

you can refer link:[http://wiki.sdn.sap.com/wiki/display/Snippets/InverseBOMExplosion-ABAP]
or use fm CS_BOM_EXPL_MAT_V2 pass X to field MEHRS

Find/Change Grep only finds one instance per paragraph, where am I going wrong?

Hi,
I've been using a Find/Change Grep to find any price with a comma and change that comma to a thin space (Newspaper's editorial style).
But the Grep only finds the first instance of this per paragraph.
Sample text...
"$200,000 $200,000 $200,000.
text at start of paragraph $200,000
$200,000 text at end of paragraph
tab $200,000."
In the sample the grep would miss the second and third price on the first line.
I've been using...
Find...
(?<=\$)(\d{3})\,?(\d{3})
also tried (\$\d{3})\,?(\d{3})
Change to...
$1~<$2
Is there anything I can add to find these last two prices?
I've been using this in combination with Batch Find Replace script, so different greps are set up for 5,6 and 7 digit numbers that start with $.
Thanks.

Try this,
Find what: (?<=\x{0024})(\d{3})\,?(\d{3})
Change to: $1~<$2
Vandy

Database Object Dependencies - only goes one level deep

I've run the Database Object Dependencies report and it appears that the report only shows the top level dependencies and not lower level ones. Am I running this report incorrectly or is there something I'm missing.
For example, it displays the tables and views correctly but does not show any triggers that have been created for a specific table. Additionally, I didn't see any references to database links being used.
version: 3.1.1.00.09
thanks
John
Edited by: johurj on Dec 8, 2008 2:49 PM
Edited by: johurj on Dec 8, 2008 2:53 PM
Edited by: johurj on Dec 8, 2008 2:54 PM

John,
The report shows the immediate dependencies for the anonymous blocks and similar code snippets contained within the application components. It's just like if you did this:
create table footab (n1 number)
create trigger footrig before insert on footab for each row begin null; end;
create or replace procedure fooproc
as
begin
for c1 in (select n1 from footab) loop
null;
end loop;
end;
SQL> select referenced_name from all_dependencies where name='FOOPROC'
2 /
REFERENCED_NAME
SYS_STUB_FOR_PURITY_ANALYSIS
STANDARD
FOOTAB
SQL>
The table FOOTAB is the only "real" object that the procedure FOOPROC has a dependency on. No mention of the trigger on the table.
Additionally, I didn't see any references to database links being used.Yes, that would be a possible improvement to the report.
Scott

Is there only the one level of undo in color?

I really hope there are more levels. I like to adjust several things and undo them sequentially to see the look...

Only one Undo. However, if you are doing a lot of your work in the Secondaries, you can disable each secondary, one at a time. Same with the ColorFX room, just select Bypass for the individual node.
On top of that, you can have up to 4 grades and you can bounce between them by just selecting the grade on the timeline.

Presenting characteristic only at one level

I have a query where the result set is presented as a hierarchy - at the state level, then district level and then at the office level. One of the characters displayed is the office manager. I have to show this value only at the office level and not at the region level.
How can I do this?

If office level is at leaf position, make display hierarchy deactivate from the characterstic properties.

Identifying Changed Dates on Documents in SAP B1

Greetingsu2026I have an unusual request that is somewhat long, very serious, and hope folks can help.
A headquarters customer believes a subsidiary company has u2018made upu2019 dates on invoices for previous billings. They describe the date changes as u2018radicalu2019 but I have not personally seen these invoices as of yet and am waiting a FAX. They requested I go into SAP B1 to see if someone has fabricated or made up or changed invoice dates and who it was. They have some specific large-dollar invoices identified to research. The person under suspect (who is no longer there) was considered an expert in SAP B1, so maybe she knew all of the different ways to change dates around. Being an expert means also she might have used some unusual ways to change dates to the ones she wanted.
Here are some of my ideas to discover this situation, but I hope someone can suggest even more steps because I would like to know every way that this situation can be discovered.
1. Open the AR Invoices and use Data > Change Log and concentrate on dates.
2. Run some SQL to validate document dates and system dates. SELECT T0.DocNum, T0.DocDate, T0.CreateDate, T0.TaxDate, T0.UpdateDate FROM OINV T0 WHERE (T0.DocDate does not equal T0.CreateDate OR T0.TaxDate does not equal T0.CreateDate). The results would show invoices that maybe had their dates changed.
3.Run a Document Journal in the Financial Module. Finance > Financial Reports > Accounting > Document Journal with the u2018Expanded Selectionu2019 of AR Invoices and a date range covering the invoices in question. Then see if the Transaction Numbers are out of sequence.
4. Run a Transaction Journal Report Financials > Financial Reports > Accounting > Transaction Journal Report with AR Invoices. Compare this report to Document Journal.
5. Run the Utilities functions of Utilities > Check Document Numbering to see if there any anomalies there in the document numbers.
6. Run the Administration > System Initialization > Document Numbering function to see if a special series has been set up.
7. Check out the AR Invoice numbering order by running another simple SQL covering a range of the invoices in question. SELECT T0.DocNum, T0.TaxDate, T0.CreateDate, T0.UpdateDate FROM OINV T0 WHERE T0.DocNum > 1583 AND T0.DocNum < 3251 ORDER BY T0.CreateDate. Then see if the AR Invoice Numbering Sequence is not consistent.
8. Check out those documents that are connected to each suspect AR Invoice and their associated dates by using the Target and Base Document icons. For example, if a Deliver Document has dates of January 2007 but the AR Invoice date is September 2006, then someone has played around with dates on at least one of the documents.
9. Get copies of the complete company database before the alleged changes were made and a company database as of today and compare the two contents. Only good if the backups are maintained for a long time.
Here come the questions on the ways I BELIEVE dates can be changed but not sure how to find and need to work on them:
QUESTION 1 u2013 If a person DTWs invoices up into SAP B1, how can I tell that DTW was used to change the dates, the date of the DTW run, and the dates that were changed?
QUESTION 2 u2013 If a person uses SQL to update dates on SAP B1, how can I find out that SQL has been used, the date of the SQL run, and the dates that were changed?
QUESTION 3 u2013 If a person goes out and changes the workstation and/or server Date and Timestamp Properties, how can I find that they did that and the date changes? You can do this on your PC by just changing the month, date, and year in Microsoftu2019s Date and Timestamp Properties.
QUESTION 4 u2013 I know SAP has a policy that no SQL can be used to update databases and/or tables and have been told some customers lost support because they did this. What does SAP do to discover this in their lab?
QUESTION 5 u2013 Are there any notes in the portals to help me find changed dates?
QUESTION 6 u2013 Are there any logs SAP B1 produces that can help identify such changes and how do I find and use them?
QUESTION 7 (and this is big) u2013 Are the other ways dates can be changed on AR Invoices and how would I uncover the way it was done and the needed information of Original Date and Changed Date?
Many, many thanks for any help provided since this is a serious situation. If you can make any suggestions it would be greatly appreciatedu2026
Zal
Edited by: Zal Parchem on Mar 13, 2009 7:31 AM

Hi Zal
If this person was an "Expert" on SAP Business One then the only way they would have changed dates would probably be directly in SQL itself. The best way to determine this would be to hope that they slipped up somewhere and forgot to change a particular date in let's say one specific table.
For invoices, start with the post date, doc date & create date. Then check each of these to the OJDT/JDT1 tables for any discrepancies. Next check the ADOC/ADO1 table for multiple instances on the invoice. If only 1 instance then check the create date, time & user as well as the aforementioned dates between OINV/INV1 & ADOC/ADO1. If multiple instances, check the dates from 1 instance to the next (This will indicate dates being changed in the system).
Next check the same dates against OINM table. If any of the dates do not tally then the SQL was changed directly.
Hope this helps. Let me know if you need further assistance.
Kind regards
Peter Juby

How to get changed data in ALV in Web Dynpro for ABAP

METHOD on_data_check .
DATA:
    node_spfli                          TYPE REF TO if_wd_context_node,
    node_sflight                        TYPE REF TO if_wd_context_node,
    itab_sflight2                        TYPE if_display_view=>elements_sflight.
node_spfli = wd_context->get_child_node( name = if_display_view=>wdctx_spfli ).
node_sflight = node_spfli->get_child_node( name = if_display_view=>wdctx_sflight ).
CALL METHOD node_sflight->get_static_attributes_table
    IMPORTING
      table = itab_sflight2.
this code is ..get all data(changed and not changed)
but i want get changed data only, not all data.
how to get changed data?
Edited by: Ki-Joon Seo on Dec 27, 2007 6:04 AM

Hi,
To get only the changed data in the ALV grid of a WD, you need to capture the "ON_DATA_CHECK" of the ALV grid.
To this please do the following in the ALV initialization of the ALV table settings :
    lr_table_settings->set_data_check(
            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CELL_EVENT ).
You may also do this:
    lr_table_settings->set_data_check(            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CHECK_EVENT)
The above two ways would depend on when do you need to check for the changed data. If you want to check the data as soon as it is entered, then use the first method. Else, use the second method.
You need to register an EVENT HANDLER for this event.(You may do this in your VIEW or Component Controller).
In this Event handler, you would find an importing parameter R_PARAM which is a ref type of      IF_SALV_WD_TABLE_DATA_CHECK.
The attribute T_MODIFIED_CELLS of this interface IF_SALV_WD_TABLE_DATA_CHECK will contain the modified cells of the ALV with the old & new values.

Editable ALV, how to capture changed data

Hi All,
I have created an editable ALV. User can make some changes in the displayed record and press "Submit" button (custom button on application toolbar), the program should validate the data and write the file on application server if validations are successful otherwise controls stay on the same screen.
I am handling this validation and writing file part in PAI of the screen.
Problem: The program is capturing the data when user changes it for the first, but program is failing to capture the subsequent changes (user makes after the validation fails). Program processes always the first time changed data only. Please help me in getting this problem resolved.
Step1 : Program shows output.
Step2: User changes Company Code.
Step3: User clicks on Submit Button.
Step3.1: Program reads the new data and performs validation.
Step3.2: New Company code is not valid, error displayed.
Step4: User changes the company code again, presses submit button.
Goto step 3.1 -> Here program does not read the new data, rather first time changes company code is again read and validated, and program shows the same error again, which is not a desired result

Hi Ashish,
you need a method HANDLE_DATA_CHANGED as handler for grid event DATA_CHANGED.
Use
LOOP AT er_data_changed->mt_mod_cells ASSIGNING <mod>.
to check all changed data. In this event, add the error messages to ER_DATA_CHANGED object.
set all required handlers, i.e.
SET HANDLER:
      handle_data_changed          FOR ro_grid,
      handle_data_changed_finished FOR ro_grid,
      handle_toolbar_set           FOR ro_grid,
      handle_user_command          FOR ro_grid,
      handle_hotspot_click         FOR ro_grid,
      handle_f4                    FOR ro_grid,
      handle_f1                    FOR ro_grid.
   ro_grid->set_toolbar_interactive( ).
Register ENTER and MODIFIED events.
    ro_grid->register_edit_event( cl_gui_alv_grid=>mc_evt_enter ).
    ro_grid->register_edit_event( cl_gui_alv_grid=>mc_evt_modified ).
Regards,
Clemens

Reg : Change Data Capture

Hi All ,
Can anyone help me on this ,
I have multiple tables in Source Data Store , now i want to capture change Data only , can i implement CDC on multiple tables in single interface.
Or any other suggestion on this ?
Regards,
Karthik

You can have 1 journalized datastore at the source side for each interface. You have to do your own customization.
If you have relationship like pk-fk then go for cdc consistent
Thanks.

How to load data only at the upper level in ASO

We are loading the Days member with values 31/30/29/28 for the top level combinations in Block storage cube using a rule file.<BR>Now we need to carry out the same thing in ASO but ASO has a constraint that we can load data only at zero level.<BR>If we do that, then data at higher levels, after aggregation is incorrect. What can be done ?

Also possible but a little more complicated is to create a separate cube with a DayCount account and only accounts and time dimensions. The time dimension goes down to day. You load it with 1 record per day. Then, you use this cube and your original cube as source, transparent partitions to a BSO cube. <BR><BR>This way, you have no bogus "input" members anywhere. Formulas that combine DayCount with other things would be written as outline formulas in BSO, since it doesn't support MDX. If you need those to be in MDX, then this wouldn't work for you.

How to change data element of IDOC segment

HI Experts,
I have copied a segment E1ISU_MEASUREMENT_MEA to ZE1ISU_MEASUREMENT_MEA.
Now i want to change data element of one of the field of the segment.
Please guide me how i can do it?
is there any disadvantages of doing this?
can we do it easily?
please give me step by step instructions if possible .
thanks in advance
Anit

Hi,
When you want to modify the segment details of a particular IDoc, you could do the same by editing the segment details via t-code, WE19. Once you edit, click on, Outbound or Standard Inbound if your IDoc is Outbound or Inbound respectively. A new IDoc will get generated. The generated IDoc will be in "yellow" status, ready to be picked up by a batch job if there exists one. Else you need to manually process the IDoc via the respective program.
~ Bineah

SAP APO DP CBF - Change data only at one level

Similar Messages

Maybe you are looking for