SAP - APO - SNP
Hi Gurus,
Can anyone tell me what setting we need to make in APO for SNP. How to set up CIF interface and other related activities.
Am new to the APO and SNP stuff. Your guidance will help me go through this setup
Arun
During ECC 6.0 Partner Summit in Bangalore recently question was raised about Blueprint document. The answer provided by SAP was to use Solution Manager for Blueprinting. The blueprint should be the definition of Business Blueprint and Configuration in Solution Manager. SAP does not suggest creating a separate blueprint document for implementation any more unlike what was provided through QAdB earlier.
So there is no separate document unless a consulting company creates one for its client.
However standard configuration documents are available as Building Block library under help.sap.com >> SAP Best Practices >> Cross-Industry Packages >> Supply Chain Management >> V1.50 >> Technical Information >> Building Block library.
That should help in determining the configurations required once you have defined the associated business processes for customer requirements.
Thanks,
Somnath
Similar Messages
-
How we can define User Constraints in SAP APO SNP?
Hi
How we can define flexible User Constraints in SAP APO SNP ? Meaning standard constraints can be configured in SAP APO SNP but how we can configured real time customer constraints?
Thanks
PoornaHi,
You can use CIF user exit CIFMAT01 for this purpose. You can follow below path in SAP for more details
SPRO---SAP refrenceIMG----Integration with other SAP components---Advanced Planning and Optimization---Application specific settingsand enhancements---Enhancement for materials---Influence data before transfer to APO on user specific basis.
YOu can read help in above path about exit.
YOu need ABAP person who need to code this. What you need is read custom field from table from MARC and Populate in procurement cose field in this exit.
Regards,
Santosh, -
How we can define storage capacity constraint for SAP APO SNP(trading company)
Hi
can any one advise how we can define storage capacity constraint in SAP APO SNP.Typically businesss scenario its a trading company sources from different sources and deliver to the distribution centres,its typically sourcing optimization using SNP optimizer.How we can define capacity constraint for a source?
ThanksHello Poorna
I suggest you to refer this thread which will be helpful.
Storage capacity as hard constraint in SNP optimizer
and this is one very informative document too.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b004ab38-d73f-2d10-9d86-81f014034235?overridelayout=t…
Hope this will help
Thank you
Satish Waghmare -
How we define Supplier constraints in SAP APO SNP?
Hi
Customer is trading company and SNP optimizer is configured for sourcing optimization,Following are queries
How we can define Supplier constraints? Supplier constraints meaning Supplier is capable of supplying 5000MT how we model this and Minimum purchase need to happen from certain suppliers of quantity 2000MT,basically Quantity constraints need to be built in SAP APO SNP.
expecting some valuable inputs
Thanks
PoornaHi Poorna,
Please follow below steps to delete Product-Location combinations in APO:
1. In ECC, deactivate Integration model for Transaction data and master data of the Products and locations to be deleted from APO.
2. Check where used list from transaction WUF and delete dependent transaction data and Master data from APO. You may use /sapapo/rlcdelete and /sapapo/sdorder_del.
Also delete dependent Master data objects like CVC, PPM, Transportation lane, PDS etc. from APO
Ensure deletion of transaction data in all existing versions in the 000 Model.
3. Set the deletion flag for Product / Product-Location combination using transaction /sapapo/mat1
4. Once the transaction data & related master data is deleted and deletion flag is set, it is possible to delete the location-products by running the report /sapapo/delete_products
To delete Locations from APO:
Follow same steps as above. In cases of deletion of Locations, all products in that location should be deleted using the Product-Location deletion flag optionJust change the report in step 4. For locations, use report /sapapo/delete_locations
To answer your other question on change in location type, I think it is not possible to change once you CIF location master to APO.
Regards,
Ravi -
Re: Implementing Of SAP-APO-SNP
Dear All,
Is it possible to implement APO-SNP alone along with SAP ECC.
If yes,Can I be advice upon any particular aspect to keep in mind before advicing this furhter to my client.
Regards,
VivekThanks for the information..
I have one more thing.
I am exploring the SNP because the client is looking to optimise their logistics cost. As I understand that In SNP the transportation lanes feature can cater to this need. My only point here is that I want to use APO for the Deployment side & not for the production side..That means I would be using the system MRP result for carrying out the production execution & will not be using SNP here but for mpving the stocks between the network I am intending to use the SNP Deployment feature.
Please advice me whether this is a right approach from cost implications perspective.
Regards,
Vivek -
Hi,
I am basically from PP background and just started working in APO SNP. after running SNP optimzer,not able to see the operation details in SNP planned order ( SNP planned order has only receipts, requirements ). could you please help me how to get operation details in SNP planned order.
Thanks
Krishna.Hi,
SNP Planned Order:
1 . SNP Planned Orders wil give details about Order start date and finish date .
2. During SNP Planned Order creation a basic scheduling will happen.
PPDS Planned Order
1. PPDS Planned Orders will give details about when the actual production is start and finish.
2. During PPDS Planned creation the Machine time details defined in the routing routing or recepie will be take into account.
3. Leadtime scheduling will be carried out to calculate the exact production start date and finish date.
Thanks,
nandha -
SAP APO SNP - Restricting Selections
Hello All,
Is there any way by which I can restrict the users to access shuffler (create & save selection) for one planning book and allow access of shuffler in other planning book, although both the planning books belong to same planning area.
When I try to restrict planner to access shuffler I only find function C_SELCTION, but using this the user is restricted on Planning Area level. So the planner is restricted for both planning books of the planning area.
Please let me know if the above case is possible to implement.
Regards,
Piyush Nandan.Hello,
Thanks for the reply.
I checked the auth obj C_APO_SEL, but it is not helpful. It doesn't resrtict the access to shuffler.
I want to restrict shuffler access in one planning book and provide access in other planning book, both planning books are of same planning area.
Is there any BADI by which we can remove the shuffler icon from the planning book.
For example there are two planning books PB1 & PB2 belonging to same planning area PA1. Now can I remove shuffler Icon from PB1 and keep shuffler icon in PB2.
Regards,
Piyush Nandan. -
Selection of transport service provider in SAP APO
Hi
For each transportation lane there will be 4 transport service providers in SAP APO SNP,customer want high transportation cost service provider to be selected for planning.kindly advise on thisHi Prakash,
I allready have read the how-to guide. And this works apart.
But this does not work together with the possibility to select several
values in several dropdown boxes as I tried to explain. I, for one,
do not see how to integrate this solution.
Regards,
Joerg -
Use of ECC planningtime fence when planning with APO SNP
I am using SAP ECC for execution, and SAP APO SNP heuristics for planning.
So, for a product planned in APO, the MRP type in ECC is X0.
So, as there is no MRP planning in ECC for such a product, what is the use of the ECC planning time fence? I think it becomes redundant in ECC - yes? In fact, I do not see it in the stock reqs list (MD04).
So, in ECC, all that 'planners' can do is to manually reschedule planned/production orders - yes?
Any shortage alerts will only be visible in APO - yes?
Thanks for any advice on this...Hi
Please find below the answers from my side.
Two questions in my mind...
So, if MRP type = X0 in ECC, the planning time fence is not seen in MD04.
First of all, we should not have any planning time fence in ECC, as it is not adding any value for products with MRP type X0. Yes in MD04 we can not see it.
2. How can ECC users easily distinguish between planned orders which are in the 'short term' from those which are beyond the SNP production horizon?
I think they have to use APO alerts. I think that should be right approach as APO is leading planning tool.
Thanks
Amol -
Any good books on SAP APO?
Hi,
Is there any good book out there that I could buy to start leaning SAP APO (esp the DP, PPDS and SNP modules) ?
ThanksRecommanded book for APO DP & SNP
1) Sales and Inventory Planning with SAP APO
by Marc Hoppe
2) Production Planning with SAP APO-PP/DS
by Jochen Balla and Frank Layer
3) Production Planning and Control with SAP
by Jörg Dickersbach, Gerhard Keller, and Klaus Weihrauch
Another good source is the SAP help portal for mySAP Supply Chain Management. The latest version of SCM 5.0 documentation for configuration would be very helpful. Try the link below.
http://help.sap.com/saphelp_scm50/helpdata/en/7e/63fc37004d0a1ee10000009b38f8cf/frameset.htm
Sanjay -
Prigramming Logic details for SAP APO Planning Models
Hi All,
I need to learn more about different model available in SAP APO - DP, SNP and their behaviour.
Request to please share any link or document associated with programming logic in different planning models available in APO.
Thanks in Advance.Hi Senthil,
Thanks dear for your response.
What I am looking in programming details of exisiting DP forecasting models like Trend Analysis, Linear Regression.
What I know about MLR is that system uses below equation
Yi = bo + b1X1 + b2X2... + bn Xn
where Yi = Sales History
bo = Mean
b2 = co-efficients
x2 = causal factor etc.
Do you have document which details out how the figures are computed using these planning models?
Once again thanks for your quick reply brother. -
Gurus,
Anyone has good documentation for APO DP and SNP. I heard there are cubes and DSOs on the APO side also so wanted to learn more about that. Any pointers/information will be really helpful.
Is APO the product SAP is going with or it is being replaced with something else?Thanks.
Thanks & Regards,
AKHI,
Refer below threads
[http://help.sap.com/saphelp_scm70/helpdata/EN/59/a3453ff168e07fe10000000a114084/frameset.htm]
[http://wiki.sdn.sap.com/wiki/display/SCM/APO-DP]
[http://wiki.sdn.sap.com/wiki/display/SCM/APO-SNP]
Also you will get configuration guide for SNP at below link
[http://help.sap.com/bp_scmv250/BBLibrary/Documentation/B06_BB_ConfigGuide_EN_DE.doc]
Thanks -
Integration SAP APO consultant duties
Hi Gurus,
can any one let me know what are the duties of integration consultant in SAP APO (DP,SNP,PPDS) ?
Please let me know if you guys have any answers
Thanks & Regards,
Raj kumarHi,
The mandate of integration consultant is to ensure that there is no business loss to the company because of some transaction data not transferring between R/3 and APO
If a planned order is not transferred to R/3, the production of certain materials may not be done and this may result in loss of business due to stock out
Similarly if a sales order or a change thereto is not transferred to APO, the planning results may be wrong resulting in business loss to the client on account of lost sale and unwanted stock.
So the duties of Integration consultant include
To properly set up the system and connections,
To closely monitor the data transfer activities and report and get the errors quickly resolved from functional persons.
Guiding the users for proper maintenance of master data as most of CIF errors are attributable to wrong data maintenance.
Regards,
Nitin Thatte -
APO (SNP) / BW - Best Practice
Hi experts,
I have several reporting requirements using BW and APO - SNP.
I´d like to know what´s the best way to acomplish this requirements. Is it best to store the data first on infocubes on APO and then extract these data to BW, or use the standard extractors, or use ABAP routines and BAPI?
Any help is welcome.
Thanks in advance.
T.P.Hi TP,
Check this document provided by SAP for APO (SCM Configuration Guide)
[http://help.sap.com/bp_biv270/BBLibrary/documentation/B75_BB_ConfigGuide_EN_DE.doc]
Regards,
Daya Sagar -
Distribution Planning within SAP - APO 3.0 or SCM 4.0
Hi,
Can do any 'Distribution Planning' within SAP SCM V4.0 or V5.0.
We are trying to improve 'decision-making' associated with selection of a particular warehouse for shipments coming out of a specific plant. The application should be able to produce a recommended set of shipments by week from each plant. Critical inputs that go into the process will be (a) Procurement Forecast; (b) Production Forecast; (c) Warehouse Space; (d) Production Plan etc
Can this be done utilizing SAP APO 3.0, SCM 4.0 or SCM 5.0?
ThanksHi Tushar,
APO 3.0, SCM 4.0 nd SCM 5.0 all provide replenishment, distribution and deployement along with basic transportation planning functionalities wihin SNP (Suppluy Network Module) of APO. With SCM 5.0 you get other applications (along with APO) like EWM (Extended Warehouse Management) and better transportation planning features.
Moreover it makes sense to go in for the lastest version of the solution to get the latest set of features. Please check on help.sap.com under my SAP Business Suite >> SCM >> APO >> SNP or http://www.sap.com/solutions/business-suite/scm/featuresfunctions/index.epx for more details.
Thanks,
Somnath
Maybe you are looking for
-
How can I sync my iphone 5 with my gmail contacts?
My calendar and mail have sync'ed ok but not the contacts. Please let me know the best way to do this so they are updated each time I sync thanks
-
When my screen saver has been on a while, I have to use the cursor to "rub out" part of the screen saver to see my login section. Can anyone help me with this?
-
When I got the prompt yesterday that there was an update for Mountain Lion I went ahead and downloaded it, and it is awful! The scroll bar on the right side of the screen disappears too quickly now to use it easily, and is difficlut to get back, whi
-
GUI_DOWNLOAD "BIN" filetype in Browser not working
Hi , I am downloading an internal table with XML data using GUI_DOWNLOAD and FILETYPE as BIN. This is not working in the SRM browser Please let me know if anyone has any idea on this Thanks Sekhar J
-
RAW Fine Tuning Engine with 5D mark II - Aperture 3
When comparing the raw fine tuning engine btw AP3 and AP2, I noticed that there are different...I have the feeling the settings on AP3 are too strong Anyone noticed the same ? Thanks Vadim