SAP_APPL 600 06 PATCH ERROR

Hello experts,
on applying patch SAPKH60006 to our ERP2005 I get an error with a "z"-table.
ZTTK3RFDAD is created by SAP and updated in this patch. But apparently there are some data definitions not correct, so activation of this patch won't work.
The corrections come in patch SAPKH60009. What can I do?
Thank you, Frank.
PS: OCS Queue is defined from SAPKH60006-10.

Hi Frank,
You might have some repaired objects that hasn't been release... check in transaction SE03 under display repair objects to see if the object causing the problem is in repair status... once you either release or modify the transport containing the repair you'll be able to proceed with the patch..
Hope this help
Juan

Similar Messages

SAP_APPL 600 04 PATCH ERROR

Hi Gurus,
When I implement the SAP_APPL 600 04, it shows the OCS has some error with add-ons in the action log, but didn't specify what's the add-on.
Below are the add-ons that I recently patched:
     PI_BASIS 2005_1_700 -10
     SAP_AP 700 -6
     SAP_BW 700 -9
Now the queue import screen shows that some CRTs should be import.
Would you help to advice where should I download the CRT?

Sorry that I missed out for one add-on which I have already patched.
ST_PI 2005_1_700 PATCH 002.
I cannot find the place where informed the corresponding CRT. I find some place which indicates some notes for certain support package. but they are not appliable for my system.
The action log is:
   Import phase 'TEST_IMPORT' was successfully finished (12.01.2007, 10:15:44)
   Import phase 'ADDON_CONFLICTS_?' (12.01.2007, 10:15:44)
   There are conflicts between OCS Packages and Add-ons
   Abort the import due to an error situation (12.01.2007, 10:46:27)

Error During apply SAP_APPL Support Patch

Dear all,
During the applying SAP_APPL Support Patch, I got the following error.
Phase RUN_SPDD_?: Information on objects Modified in System
The ABAP Dictionary objects were imported completely.This means that all imported ABAP Dictionary objects are now available in your system in the shipped original state.
The system detected however that 1 of the ABAP Dictionary objects in teh support packages have been modified in your system.
Check whether you want to retain or restore the changes you have made.
To do this , call transaction SPDD (Choose 'call SPDD').
For more information about performing the modification adjustment, see 'modification adjustment help'.
Note:
If you do not perform a mofication adjustment, all the changes to the objects named in transaction SPDD are lost after dictionary activation.If you have modified tables, this may lead to data being lost.
help me.
Regards,
PC Patel

Thanks Gagan & Amber,
I ran the process in forground and got below notice :
The ABAP Dictionary objects were imported completely. This means that
all imported ABAP Dictionary objects are now available in your system
inthe shipped original state.
The system detected however that 1 of the ABAP Dictionary objects
in the Support Packages have been modified in your system.
Check whether you want to retain or restore the changes you have made.
To do this, call transaction SPDD (choose 'Call SPDD').
This is the biggest issue i am facing, I have done all adjustment in SPDD, all components are Green there. dont know why its saying 1 object left in SPAD.
Second: Regarding the SPAU i am stuck on SPDD SPAU is still to come.
Kindly suggest, Resolution will be appriciated.
Regards,
Gagan

ORA 600 [kkqvmRmViewFromLst1] error

Hi,
I am using Binary XML DB .
Here is the DB banner info.
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
"CORE 11.2.0.1.0 Production"
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
I am getting ORA 600 [kkqvmRmViewFromLst1] error while executing a query
SELECT AGTAB1.AGREEMENT_ID AS agreement_ID
     FROM TNMAB_AGREEMENT_XML A ,
     XMLTable('/Agreement'
     PASSING A.AGREEMENT_XML COLUMNS AGREEMENT_ID VARCHAR2(20) path 'Identifier' ,
     SHP_PTY_CUST_HOLDER XMLType PATH 'ShippingPartyGroups/ShippingParties/CustomerHolder' ,
     NAMED_CUSTOMER_GROUPS XMLType PATH 'NamedCustomerGroups/NamedCustomer/SAP_IDs/StringWrappers' ) AGTAB1 ,
     XMLTable('/Agreement'
     PASSING A.AGREEMENT_XML COLUMNS NAMED_CUSTOMER_GROUPS XMLType PATH 'NamedCustomerGroups/NamedCustomer/SAP_IDs/StringWrappers' ) AGTAB2 ,
     XMLTable('/CustomerHolder' PASSING AGTAB1.SHP_PTY_CUST_HOLDER
     COLUMNS SAP_ID VARCHAR2(10) PATH 'SAP_ID') x2,
     XMLTable('/StringWrappers'
     PASSING AGTAB2.NAMED_CUSTOMER_GROUPS COLUMNS SAP_ID VARCHAR2(10) PATH 'SAP_ID') x3
     WHERE (X2.SAP_ID IN ('3163494000') OR
     X3.SAP_ID IN ('3163494000')) group by AGTAB1.AGREEMENT_ID
Please advise
Thanks

I am getting ORA 600 [kkqvmRmViewFromLst1] error while executing a queryAn ORA 600 error is a untrapped oracle software error an should be dealt with by creating an SR (service request) via support.oracle.com

Autoconfig -patch error

Hai frnds ,
iam getting the eroor when i run autoconfig
=========================[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[PROFILE PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /pix/p01/oracle/pixcomn/admin/install/pix_server1
afcpctx.sh INSTE8_PRF 1
=======================================================
i was asked to apply the patch 3377508(got from metalink)when i tried to applied the patch i get the following error.iam a fresher and i dont know wat to do.i got the error when i run the patch
the error is===========
*********Writing jobs to run to restart file.
Reading jobs from FND_INSTALL_PROCESSES table ...
FAILED: file afmntmds.ldt on worker 1 for product fnd username APPS.
FAILED: file functype.ldt on worker 2 for product fnd username APPS.
FAILED: file b2040719.ldt on worker 3 for product fnd username APPS.
FAILED: file afmntfns.ldt on worker 4 for product fnd username APPS.
FAILED: file afctxdep.ldt on worker 5 for product fnd username APPS.
Done reading jobs from FND_INSTALL_PROCESSES table ...
Telling workers to read 'todo' restart file.
Done.
ATTENTION: All workers either have failed or are waiting:
FAILED: file afmntmds.ldt on worker 1.
FAILED: file functype.ldt on worker 2.
FAILED: file b2040719.ldt on worker 3.
FAILED: file afmntfns.ldt on worker 4.************* Start of AD Worker session *************
=======================
so please help me to run the patch correctly and then run the autopatch correctly
Thanks and Regards
Parithi.A.

Hi,
Search AutoConfig for afcpctx.sh, you should find more details about the error around the filename.
For the patch error, please search the workers log files for details about the error -- Log files can be found under $APPL_TOP/admin/<SID>/log directory (search for adwork*.log).
Regards,
Hussein

Patch error...dammit :)

I installed the patch and got:
svrmgrl: error in loading shared libraries: libclntsh.so.8.0: cannot open shared
object file: No such file or directory
Applying patch 8.1.5.0.1 .....done
Applying patch 8.1.5.0.2 .....done
Did it load? Or is that error serious? Do I need to correct something and then reinstall it?
Also, I can't run dbassist like many people I see have had problems with. Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
Anyway...I decided to try and install the patch..then try again and if that doesn't work...I'm going to try installing a later version of the JVM other than 1.1.6 like Oracle says to use. If anyone knows a way around that error I'd appreciate it!
THANK YOU THANK YOU THANK YOU...in advance.
-Julie

AFAIK, you do not have to rerun the root.sh script.
I have already upgraded to 8.1.5.0.2.
That patch error may be related to the relinking script bug that I have posted earlier.
Basically, what I found out is that if you did not install some/all of the oracle options, the relinking will fail. The relinking script I think assumes that all the options (and related lib file) are installed, which in my initial installations were not.
If you apply only the 8.1.5.0.1 patch, svrmgrl and sqlplus will still report 8.1.5.0.0. If you apply the .0.2 patch, in my case (when I did not install the options), I cannot run svrmgrl and therefore unable to create a database.
Check your /tmp/81501.log and /tmp/81502.log.
Do a grep for "No such file"
If grep returns:
/usr/sbin/ld: -lxxxx No such file or directory, the relinking has failed.
null

'SAP_APPL,600 has to be installed' when try to install SAP ERP EnHP3

Hi,
I'm trying to install EHP3 on windows2003/oracle10.2/SAPecc6.0 by tools SPAM & SAINT.
But the system send the message 'Component SAP_APPL,600 has to be installed'
I want download the 2 packages:
"SAP enhancement package 1 for SAP ERP 6.0"
"SAP enhancement package 2 for SAP ERP 6.0"
But I have not find there in the SAP's Portal
I found only:
    SAP ERP ENHANCE PACKAGE
          SAP ENH PACK 3 FOR SAP ERP 6.0
          SAP ERP ENHANCE PACKAGE 2005.2
I have a pack of DVDs 'SAP ERP 6.0 SR3' which contents:
- upgrade master (51033520)
- installation export (51033500) 2 dvd
- ERP components (51033525)
- Upgrade export (51033501) 3 dvd
- Langage (51033496) 2 dvd
- Documentation SAP ERP (50085424)
Do you explain how and where I can dowload and install the component SAP_APPL,600
Thanks.

Hi,
EHPs are cumulative, you should only install the parts from the latest EHP (=EHP3).
There is no need (and benefit) to install EHP1 or 2.
The download should be done using Solution Manager Maintenance Optimizer (not SMP) - here you get also a valid Stack XML generated which ist required to perform the installation.
More information here: The specified item was not found. or here: http://service.sap.com/~sapidb/011000358700001166742007E
Best regards,
Christian.

ORA-600 (QMXISTOREXOBEL1) ERROR

I have a Customet that obtain the following
error:
ORA-00600: internal error code, arguments: [qmxiStoreXobEl1], [10], [258], [1], [],
when he insert an xml document in a xmlType column.
He use:
OS: Linux SuSE 2.1 A.S.
DB: ORACLE 10g
He registred the xmlSchema on database. Some xml document are stored correctly, other obtain the error like before.
Any suggestion or idea is appreciated.
Thank you
Paola

user12003658 wrote:
The application has generated ORA-600 [17059] error in 9.2.0.7 database. I looked up in Metalink for this particular error. Looks like the number of child cursors against a single parent object has reached 32768. I can verify this in the trace file too. The solution in the metalink doc suggest that i should increase the limit to 65536. How can i increase the child cursor limit? The other cursor related initialization parameters in the database are:
CURSOR_SHARING=exact
CURSOR_SPACE_FOR_TIME=false
OPEN_CURSORS=500
SESSION_CACHED_CURSORS=0
Thanks in advance..Getting ORA-00600 internal errors, you need to check metalink "ORA-00600 error lookup" to find the cause and solution that's offered by Oracle Support.
As you're using unsupported 9i version, you can't get any feedback from support :(

SAP_APPL,600 is showing Red Cross after upgrade the EHP3

Hi All,
I have applied EHP3 for SAP ECC 6 on Window server 2003.
Almost all support packages successfully upgraded except SAP_ALL and EA_APPL,
There are SAP_APPL,600 is showing Red Cross under the following tree.
SAP_APPL
   -->SAPKH6001
      -->Prerequistie set 01
        --> SAP_APPL, 600        X (Red Cross)
        --> SAPKNA7001           OK
and above highlighted issue is looking same in remaining prerequistie of
all Support Package under the software components SAP_APPL and EA_APPL.
How can i resolve this issue?
Regards,
majamil

Dear Majamil,
What does the Import Status show?
As per me if the import status shows Green there is nothing to worry. As I have checked in our EHP3 system its the same but we are not facing any issues. I guess we can ignore that.
Regards,
Antony Chaitanya.

SNP Optimizer Read Error Error id : 600 and Error id : 812

Hi All,
I am rebuilding my SNP in a new SCM environment. I have transfered my PDS's and WorkCenters/Capacity via the CIF. These appear fine when I display and have performed the LC Check for the resouces using the TOOLS at /n/sapapo/res01 tcode but all appeared green. I am using standard Hierachies and think they are fine and assigned to the Planning area correctly.
When I press the "oprimizer" ...It runns until it gets to the "Loading Planning Data" then it fails with a "Error when Reading Planning Data" and "Optimizer: an internal error occured". This error occurs very quick once it starts this process and complexity does not seem to matter.
When lookinjg at the Trace File of the log I see the below activity that seems to be the cause but I do not know what the errors mean or where to reference them? Has anyone else encountered this previousluy or know where can investigate this further. Any help or directions on Error id : 600 and Error id : 812 would be great!
Thanks in advance for all your assistance in this!
===
 19.04.2011 19:04:39 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 801 to OutputInterface from []
 19.04.2011 19:04:40 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 802 to OutputInterface from []
 19.04.2011 19:04:41 snpopsvr_script.cpp(176) 'SuperVisor' Running in 700 data version mode...
 19.04.2011 19:04:41 snpopsvr_script.cpp(862) 'SuperVisor' Interpreted run time limitation as minimum run time (300 sec.), set run time limitation to 900 seconds.
 19.04.2011 19:04:41 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 803 to OutputInterface from []
 19.04.2011 19:04:43 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'SNPRModelGenerator' [6]->init
 19.04.2011 19:04:43 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'SNPRModelGenerator' [6]->init = success [ctx size : 0]
 19.04.2011 19:04:43 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'SNPRModelGenerator' [6]->download
 19.04.2011 19:04:43 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/MSDP_OPT_UPLOAD
<e> 19.04.2011 19:04:53 snpopsvr_script.cpp(286) 'SuperVisor' <!> CORE EXCEPTION : 14 =
 RFC_RC (RFC_EXCEPTION) Exception raised
 RFC_ERROR_GROUP (RFC_ERROR_APPLICATION_EXCEPTION) The called function module raised an exception
 key=ERROR
 message=ERROR
 exception=ERROR
 19.04.2011 19:04:53 core_msgmgr.cpp(394) 'SuperVisor' <GUI MSG> Error id : 600 [class : <default>] - no params
 19.04.2011 19:04:55 core_msgmgr.cpp(394) 'SuperVisor' <GUI MSG> Error id : 812 [class : <default>] - no params
 19.04.2011 19:04:56 optsvr_main.cpp(1166) 'MsgMgr' Current check values:
[CHECK_EQUAL]
[CHECK_UPPERBOUND]
nPEAK_MEMORY_linuxx86_64 = 79488
[CHECK_LOWERBOUND]
 19.04.2011 19:04:56 optsvr_main.cpp(1209) 'MsgMgr' Performance values:
bSuccess false
nCPU_TIME 0
nPEAK_MEMORY 79488
nREAL_TIME 17
SNP BuildMode Release
SNP Runtime requested 900
tracefile optsvr_trace20110419_190439_2e12.log
 19.04.2011 19:04:56 optsvr_main.cpp(1235) 'MsgMgr' Performance Monitor values:
nCPU_TIME 0
nPEAK_MEMORY 79488
nREAL_TIME 17
 19.04.2011 19:04:56 optsvr_dsr.cpp(96) 'MsgMgr' <writeDSRdata> tracing not active => no DSR written
 19.04.2011 19:04:56 optsvr_main.cpp(1256) 'SuperVisor'
Finished->FAILED ...

Thanks for the reply...
I was able to manually enter and save an SNP planned order via the planning book.
I have failures where my Input material is UOM=TON and Output is UOM=TON and also where input is UOM=TON and output is UOM=KG. I am able to switch between these UOM's in the planning book and product view.
When I have DEBUG2 on via OPT10 I see:
Message Log:
Input parameters
Customizing Settings
Active BAdI Implementations
Step 1: Data read and model creation started at 16:36:35 on 04/22/2011
Runtime 00:00:00 to measuring point Step_1_Start
Runtime 00:00:01 to measuring point Initializations
Runtime 00:00:00 to measuring point Arc_Read
Runtime 00:00:01 to measuring point SNP_Planed_Order_Deletion
Runtime 00:00:00 to measuring point Procurment_and_Transport_Order_Deletion
Runtime 00:00:00 to measuring point Arcmat_Read
Error occurred when reading data
Trace File:
<1> 22.04.2011 16:36:36 rfc_connection.cpp(631) 'MsgMgr' <rfc> RfcCall for /SAPAPO/MSDP_OPT_UPLOAD
<1> 22.04.2011 16:36:36 rfc_connection.cpp(640) 'MsgMgr' <rfc> RfcReceive for /SAPAPO/MSDP_OPT_UPLOAD
<2> 22.04.2011 16:36:38 core_linux_proc.cpp(40) 'MsgMgr' Mem measurement (KB): current=144108 peak=144108
<2> 22.04.2011 16:36:40 core_linux_proc.cpp(40) 'MsgMgr' Mem measurement (KB): current=144108 peak=144108
<2> 22.04.2011 16:36:42 core_linux_proc.cpp(40) 'MsgMgr' Mem measurement (KB): current=144108 peak=144108
<e> 22.04.2011 16:36:43 snpopsvr_script.cpp(286) 'SuperVisor' <!> CORE EXCEPTION : 14 =
 RFC_RC (RFC_EXCEPTION) Exception raised
 RFC_ERROR_GROUP (RFC_ERROR_APPLICATION_EXCEPTION) The called function module raised an exception
 key=ERROR
 message=ERROR
 exception=ERROR
 22.04.2011 16:36:43 core_msgmgr.cpp(394) 'SuperVisor' <GUI MSG> Error id : 600 [class : <default>] - no params
 22.04.2011 16:36:43 core_msgmgr.cpp(394) 'SuperVisor' <GUI MSG> Error id : 812 [class : <default>] - no params
 22.04.2011 16:36:43 optsvr_main.cpp(1166) 'MsgMgr' Current check values:
[CHECK_EQUAL]
Thanks again!

Fox syntax errors after SEM 600 Patching to SP12

Greetings all you experts out there..
Pre patching to SP12, all our Fox formulas using the following syntax to convert a fiscal period to a fiscal year worked without problem:
PER = 0092008.
YEAR = PER/0001000.
This would return a value for YEAR = 0002008.
Yes, it worked with the 3 leading zero's....!!!
Post patching, system no longer likes this syntax and throws out an syntax error message.
Please understand that I have no difficulty in changing the code - say using SUBSTR - to simply get the 4 digits only relevant to the fiscal year.......BUT...because we have these fox functions all over our solution, we were hoping for a more general fix which then would not require changes (and thus transports to production) etc.....
So, any ideas on how to fix WITHOUT changing the Fox code...???
Thanks and regards,
Rael

Hi Hans,
Sorry, well spotted.....a typing mistake...
Yes, the fiscal period is in format 2008009....and when you apply following Fox statement:
PER = 2008009.
YEAR = PER / 0001000.
the result is
YEAR = 0002008.
and this is where the Fox formula editor is throwing up the syntax error....because it expects a 4 digit number for the year, i.e., no leading zeros.......
Remember, these Fox formulas have beein working correctly for years, and it is only after patching that we are receiving the syntax error....
Regards,
Rael

ORA-600 [17069] error while running catrelod.sql to downgrade 11g database

Hi,
We are downgrading our 11.2.0.2 database to 10.2.0.4. We have successfullly run catdwgrd.sql without any errors in 11g env. While running catrelod.sql in 10g env we are facing the following error:
SQL> @?/rdbms/admin/catrelod.sql
TIMESTAMP
COMP_TIMESTAMP RELOD__BGN 2013-04-24 20:15:39 2456407 72939
DOC>#######################################################################
DOC>#######################################################################
DOC> The following statement will cause an "ORA-01722: invalid number"
DOC> error if the database server version is not 10.0.0.
DOC> Shutdown ABORT and use a different script or a different server.
DOC>#######################################################################
DOC>#######################################################################
DOC>#
no rows selected
DOC>#######################################################################
DOC>#######################################################################
DOC> The following statement will cause an "ORA-01722: invalid number"
DOC> error if the database has not been opened for MIGRATE.
DOC>
DOC> Perform a "SHUTDOWN ABORT" and
DOC> restart using MIGRATE.
DOC>#######################################################################
DOC>#######################################################################
DOC>#
no rows selected
Session altered.
Session altered.
no rows selected
DECLARE
ERROR at line 1:
ORA-00600: internal error code, arguments: [17069], [0x170FB8CA8], [], [], [],
[], [], []I have checked the trace file in udump but it dint give any readable information.
Please find below environment details.
OS : RHEL 5 64 bit
11g Database : 11.2.0.2
10g Database : 10.2.0.4
Kindly assist.

KR10822864 wrote:
Whenever an ORA-600 error is raised a trace file is generated and an entry written to the alert.log with details of the trace file location. Starting with Oracle Database 11g Release 1, the diagnosability infrastructure was introduced which places the trace and core files into a location controlled by the DIAGNOSTIC_DEST initialization parameter when an incident, such as an ORA-600 is created. For earlier versions, the trace file will be written to either USER_DUMP_DEST (if the error was caught in a user process) or BACKGROUND_DUMP_DEST (if the error was caught in a background process like PMON or SMON). The trace file contains vital information about what led to the error condition
please post 40 lines of alert log info .
MOS Note:ORA-600 [17069] "Failed to pin a library cache object after 50 attempts" [ID 39616.1]
"Look in the trace file for the text 'LIBRARY OBJECT HANDLE: handle=170fb8ca8'"
if not found any massages like above please raise [email protected].
Hi KR,
Thanks for your help. As suggested I have checked the trace file to search and found the below info. I suppose it is some kind of lock but not sure about it. Please let me know if the following makes sense:
    SO: 0x21158a6e0, type: 3, owner: 0x211006f28, flag: INIT/-/-/0x00
    (call) sess: cur 211572570, rec 211572570, usr 211572570; depth: 0
      SO: 0x21158a9b8, type: 3, owner: 0x21158a6e0, flag: INIT/-/-/0x00
      (call) sess: cur 211572570, rec 0, usr 211572570; depth: 1
        SO: 0x1727a2618, type: 54, owner: 0x21158a9b8, flag: INIT/-/-/0x00
        LIBRARY OBJECT PIN: pin=1727a2618 handle=170fb8ca8 mode=S lock=171243e98
        user=211572570 session=211572570 count=1 mask=001d savepoint=0x43 flags=[00]
        SO: 0x171243e98, type: 53, owner: 0x21158a9b8, flag: INIT/-/-/0x00
        LIBRARY OBJECT LOCK: lock=171243e98 handle=170fb8ca8 mode=S
        call pin=0x1727a2618 session pin=(nil) hpc=0000 hlc=0000
        htl=0x171243f18[0x17278a310,0x17278a310] htb=0x17278a310 ssga=0x172789928
        user=211572570 session=211572570 count=1 flags=PNC/[0400] savepoint=0x43
        LIBRARY OBJECT HANDLE: handle=170fb8ca8 mtx=0x170fb8dd8(0) cdp=0
        name=SYS.STANDARD
        hash=51570e225ed8a9a803b7318f191e0a8d timestamp=04-18-2006 00:00:00
        namespace=TABL flags=KGHP/TIM/SML/[02000000]
        kkkk-dddd-llll=0000-001d-001d lock=S pin=S latch#=3 hpc=0004 hlc=0004
        lwt=0x170fb8d50[0x170fb8d50,0x170fb8d50] ltm=0x170fb8d60[0x170fb8d60,0x170fb8d60]
        pwt=0x170fb8d18[0x170fb8d18,0x170fb8d18] ptm=0x170fb8d28[0x170fb8d28,0x170fb8d28]
        ref=0x170fb8d80[0x170fb8d80,0x170fb8d80] lnd=0x170fb8d98[0x170f05b50,0x170fa6858]
          LIBRARY OBJECT: object=170e82de8
          type=PCKG flags=EXS/LOC[0005] pflags=NST/IVR[0201] status=VALD load=0
          DATA BLOCKS:
          data#     heap pointer    status pins change whr
              0 170e831f8 170e82fc0 I/P/A/-/-    0 NONE   00
      SO: 0x21158e470, type: 5, owner: 0x21158a6e0, flag: INIT/-/-/0x00
      (enqueue) CU-70E88BC0-00000001    DID: 0001-001F-00000004
      lv: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res_flag: 0x2
      res: 0x17677adc8, mode: X, lock_flag: 0x0
      own: 0x211572570, sess: 0x211572570, proc: 0x211006f28, prv: 0x17677add8
      SO: 0x177f82c28, type: 59, owner: 0x21158a6e0, flag: INIT/-/-/0x00
      cursor enqueue
      child: 170e89348, flag: 53, number: 0
      parent: 170e89738

Upgrading the MII 14.0 SP4 patch error

Hi All,
I have installed 14.0 SP4 and it works fine.
But I again try to update the patch for that by running the SUM again. But I am not able to start the STARTUP.BAT and DSU also.
It throws the below error. So please help out.
while running STARTUP.BAT
C:\Users\dn1adm>E:\MII14Install\SUM\SUM\STARTUP.BAT
SAP directory - E:\usr\sap
DN1 directory - E:\usr\sap\DN1
Starting DSUService (E:\MII14Install\SUM\SUM\sdt\exe\DSUService.bat )...
while running DSUservices.BAT
More than one system directories found on the l
ocal host: E:\usr\sap\DAA and E:\usr\sap\DN1
Feb 25, 2014 4:35:43 PM [Error]: com.sap.sdt.server.core.services.ServiceExcepti
on
Feb 25, 2014 4:35:43 PM [Fatal]: Error during controller startup.
Feb 25, 2014 4:35:43 PM [Fatal]: SL Controller exiting.
Regards
G.Partheeban

Hi All,
Got the solution. The STARTUP.BAT file is been placed in the installation directory(usr/sap) and then it works fine. Also I have installed the patches and all working fine.
Any way thanks for the answer christian libich.
Regards
G.Partheeban

Oracle Security Patch Error while applying --The filename, directory name,

Hello,
I am running into strange error while applying Oracle Security Patch 68 by using Opatch.
Supposedly, All the environment variables are set properly.
ACTIVE_STATE_PERL=true
DBMS_TYPE=ORA
dbs_ora_tnsname=YBQ
JAVA_HOME=C:\jdk1.3.1_10
OPATCH_DEBUG=TRUE
ORACLE_HOME=E:\oracle\ora92
ORACLE_SID=YBQ
Path=E:\oracle\OPatch;C:\jdk1.3.1_10\bin;E:\oracle\Perl\bin;E:\oracle\ora92\jre\1.4.2\bin\client;E:\oracle\ora92\jre\1.4.2\bin;E:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\Program Files\Common Files\VERITAS Shared;\NetBackup\bin;C:\Program Files\Windows Resource Kits\Tools\;C:\Program Files\Support Tools\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;E:\usr\sap\YBQ\SYS\exe\run
Installed Active Perl. latest version
downloaded Opatch 1.0.0.50
and the patch number 3738339
I went to that directory and run the command :
perl opatch.pl apply
It started of well.
OPatch version is: 1.0.0.0.50
Using ORACLE_HOME/oui to look up oui libs...
Oracle Home = E:\oracle\ora92
Location of Oracle Inventory = E:\oracle\ora92\inventory
Oracle Universal Installer shared library = E:\oracle\ora92\oui\lib\win32\oraInstaller.dll
Path to Java = "E:\oracle\ora92\jre\1.4.2\bin\java.exe"
Location of Oracle Inventory Pointer = N/A
Location of Oracle Universal Installer components = E:\oracle\ora92\oui
Required Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
find under OH/oui/jlib
found OraInstaller.jar
Checking if this is a RAC system...
Accessing inventory... This may take up to 300 seconds.
(retry 10 times, delay 30 seconds each time)
System Command: ""E:\oracle\ora92\jre\1.4.2\bin\java.exe" -Dopatch.retry=10 -Dopatch.delay=30 -DTRACING.ENABLED=TRUE -DTRACING.LEVEL=2 -Dopatch.debug=true -classpath "E:\oracle\ora92\oui\jlib\OraInstaller.jar;E:\oracle\ora92\oui\jlib\srvm.jar;jlib\opatch.jar;E:\oracle\ora92\oui\jlib\xmlparserv2.jar;E:\oracle\ora92\oui\jlib\share.jar;.:E:\oracle\ora92\jlib\srvm.jar" opatch/O2O "e:\oracle\ora92" "E:\oracle\ora92\oui" opatch.pl 1.0.0.0.50"
Result:
----- DEBUG is ON -------
oracle.installer.startup_location will be set to E:\oracle\ora92\oui
oracle.installer.oui_loc will be set to E:\oracle\ora92\oui
oracle.installer.scratchPath will be set to /tmp
opatch.local_node_only is OFF
retryOption is ON: 10
delayOption is ON: 30
Few more stuff here .. not pasting the entire contents
System Command: ""E:\oracle\ora92\jre\1.4.2\bin\java.exe" -Dopatch.retry=10 -Dopatch.delay=30 -DTRACING.ENABLED=TRUE -DTRACING.LEVEL=2 -Dopatch.debug=true -classpath "E:\oracle\ora92\oui\jlib\OraInstaller.jar;E:\oracle\ora92\oui\jlib\srvm.jar;jlib\opatch.jar;E:\oracle\ora92\oui\jlib\xmlparserv2.jar;E:\oracle\ora92\oui\jlib\share.jar;." opatch/CheckConflict "E:\oracle\ora92\oui" "e:\oracle\ora92" opatch.pl 1.0.0.0.50 3738339 "3741539 3528282 3516951 3622875 3668572 3371796 3239873 3356103 3543125 3666502 2800494 2824035 2964252 3617042 3320622 3571233 3253770 3492040 3566469 3354470 3625370 3583686 3150750 3617519 3635177 3597640 3749394 3542588 3698501 2954891 2918138 3559212 3518909 3412818 3430832 3172282 3358490 3637624 3458446 3179637 2810394 3668224 3609791 3566813 3475932 2338704 3412136 3388633 3540576 3571226 3575743 2690205 3240280 3509265 3177513 3575747 3811906 3554319 3752406 3323435 " E:\3738339\etc\config\actions"
Result:
opatch.pl version: 1.0.0.0.50
Copyright (c) 2001-2004 Oracle Corporation. All Rights Reserved.
The filename, directory name, or volume label syntax is incorrect.
Error in executing Java program to check conflict
ERROR: OPatch failed during pre-reqs check.
Now there is no problem with executing the last java program in the same prompt by removing the first and the last double quote "
Please advise.
Thanks in advance.

hi somnath,
this is the portal content management forum. for your database question please use the database forums:
http://forums.oracle.com/forums/index.jsp?cat=18
thanks,
christian

10.1.3.3.0 Patch error

I have applied 10.1.3.3.0 patch to 10.1.3. for my Oracle SOA Instance. After applying the patch I am able to open the Application Control Page and I am able to access my ESB control but not my BPEL control. I am getting the following error. Your response is greatly appreciated.
Thank you
-Arun
Following is the Error I am seeing on the page:
Oracle BPEL Process Manager Full Cycle
An unexpected error has occurred while executing your request. This is most likely related to a defect in the Oracle BPEL Process Manager product. We apologize you can post the error to the OTN forum and we will get back to you as soon as possible.
Build Information:
Oracle BPEL Server version 10.1.3.3.0 Build: 0 Build time: Fri Jun 15 06:05:31 PDT 2007 Build type: release Source tag: PCBPEL_10.1.3.3.0_GENERIC_070615.0525
Exception Message:
[java.lang.NoSuchMethodException] com.collaxa.cube.ejb.impl.FinderBean.tryLookupInstanceByReferenceId(java.lang.String, com.oracle.bpel.client.auth.DomainAuth)
Exception Trace:
java.lang.NoSuchMethodException: com.collaxa.cube.ejb.impl.FinderBean.tryLookupInstanceByReferenceId(java.lang.String, com.oracle.bpel.client.auth.DomainAuth) at java.lang.Class.getMethod(Class.java:1581) at com.evermind.server.ejb.interceptor.MethodStateFactory.createMethodState(MethodStateFactory.java:112) at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.createMethodStates(ExposableBeanDescriptor.java:657) at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.getRemoteComponentMethodStates(ExposableBeanDescriptor.java:723) at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.getMethodState(ExposableBeanDescriptor.java:599) at com.evermind.server.ejb.AbstractEJBObject.OC4J_getMethodState(AbstractEJBObject.java:385) at FinderBean_RemoteProxy_4bin6i8.lookupDomain(Unknown Source) at com.oracle.bpel.client.Locator.lookupDomain(Locator.java:228) at index.jspService(_index.java:78) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65) at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396) at java.security.AccessController.doPrivileged(Native Method) at javax.security.auth.Subject.doAsPrivileged(Subject.java:517) at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370) at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259) at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51) at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193) at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283) at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198) at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:131) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15) at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396) at java.security.AccessController.doPrivileged(Native Method) at javax.security.auth.Subject.doAsPrivileged(Subject.java:517) at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:595)

This is a bug - and it's because a problem with the orabpel.ear file.
Solution:
1. shutdown the server
opmnctl stopall
2. copy one file over the other
e.g. cp $ORACLE_HOME/bpel/system/services/lib/orabpel.ear $ORACLE_HOME/j2ee/oc4j_soa0/applications/orabpel.ear
3. startup the server
opmnctl startall

SAP_APPL 600 06 PATCH ERROR

Similar Messages

Maybe you are looking for