SAP_APPL(SAPKH60012)-eroor during Import_Proper phase

Hello All,
I has an ECC 6.0 sytem and was applying SAPKH60012-SAPKH60013 together.
During the TEST-IMPORT i got the following error for both the support package
"R3TRMSAGME was repaired in this system".
I had ignored the error during TEST_IMPORT.
But now i am stuck with this in my IMPORT_PROPER phase.
Please suggest, I did not find any SAP Notes for this error.
Also the main error
Error in phase :IMPORT_PROPER
Reason of the ERROR:TP_STEP_FAILUER
Return Code: 0008
Error Message :OCS Package SAPKH60012 , tp step "I",return Code 0008
Also i found in the log this error
Start import LIMUDOCUNAME818
R3TRMSAGME was repaired in this system
LIMUDOCUNAME818
Regards
Anthony
Edited by: Anthony D'souza on Mar 6, 2009 11:11 PM

Hi,
For this error "R3TRMSAGME was repaired in this system". You need to reset the repair fag by using tcode se03.
Also this error "TP_STEP_FAILUER" says that  tp failed. If you have upgraded kernel level before sp upgrade then check current tp's version. If you have not upgraed tp.exe  then download latest tp.exe & put it in your kernel path & restart the sp upgrade.
Please check ksap note for known problem in Support packs for your SAP release
Also check below threads. It will help you
Re: spam error in IMPORT_PORPER
tp
Thanks,
Sushil

Similar Messages

  • Error occurred during the phase IMPORT_PROPER

    Hi All,
    We are currently installing Add-on ST-PI Rel.2008_1_620 SAPKITLRBA, and the corresponding 3 support packages SAPKITLRB1 to SAPKITLRB3, in one of the quality systems. However, an error is encountered during the installation which is as follows:
    The installation was stopped, since an error occurred during the phase
    IMPORT_PROPER, which the Add-On Installation Tool is unable to resolve
    without your input.
    After you have corrected the cause of the error, continue with the
    import by choosing Continue in the queue display.
    The following details help you to analyze the problem:
        -   Error in phase: IMPORT_PROPER
        -   Reason for error: TP_BUFFER_INCONSISTENCY
        -   Return code: 0008
        -   Error message: Pkgs. in queue don"t exist in the tp buffer (e.g.
            SAPKITLRBA)
    Also, below is the SLOG of the system:
    ERROR SAPKITLRBA ST6 I 0016 20110602203832 STPIUSER INUP
    cpafisr5 20110602203531
    STOP MAIN IMPORT ST6 I 20110602203833 INUP
    cpafisr5 20110602203531
    ERROR: stopping on error 16 during MAIN IMPORT
    STOP imp all ST6 0016 20110602203833 INUP
    cpafisr5 20110602203531
    START MAIN IMPORT ST6 I 20110602203943 INUP
    cpafisr5 20110602203943
    START TRANSMIT BUFFER ENTR ST6 g 20110602204020 INUP
    cpafist0
    STOP TRANSMIT BUFFER ENTR ST6 g 0000 20110602204020 INUP
    cpafist0
    START COMMIT BUFFER ENTRIE ST6 g 20110602204020 INUP
    cpafisk0
    HALT 20110602204020
    ERROR: tpsettainfo: Cofile /usr/sap/trans/cofiles/KMARK.SYN does not
    exist!
    ERROR: EXIT(16) -> process ID is: 10932
    WARNING: TA SAPKITLRB1 not found via index, reading whole buffer
    The same add-on and support packages we successfully installed in its respective developement system and in other systems as well.  However, request you all to kindly assist in resolving the error.
    Thanks in advance.
    Regards,
    Indraneel Upponi

    ERROR: tpsettainfo: Cofile /usr/sap/trans/cofiles/KMARK.SYN does not exist!
    Does this file exist on this location ? It seems buffer insoncistency from the error message.
    Regards,
    Subhash

  • Error in IMPORT_PROPER phase

    Hi guys,
    I am trying to apply SP on my system 09-15
    and I get and import_proper phase error below:
    The import was stopped, since an error occurred during the phase
    IMPORT_PROPER, which the Support Package Manager is unable to resolve
    without your input.
    After you have corrected the cause of the error, continue with the
    import by choosing Support Package -> Import queue from the initial
    screen of the Support Package Manager.
    The following details help you to analyze the problem:
         -   Error in phase: IMPORT_PROPER
         -   Reason for error: TP_BUFFER_INCONSISTENCY
         -   Return code: 0008
         -   Error message: Pkgs. in queue don"t exist in the tp buffer (e.g.
             SAPKB64010)
    Tried the following:
    Generated a new TP Parameter through STMS
    Clear the log files
    Tried to clear the buffer manually with S37 OCS_RESET_QUEUE getting an object locked message.
    Updated the Kernel and SPAM/SAINT
    Please Help
    Thanks,
    Damien

    Hi All!
    I have a similar problem on my Netweaver'04 BW Productive Instance, STMS is on Stuck and no more transport are possible!!!
    VERY BAD!!!
    I have the SAME error and i checked all the possible but finding nothing interesting
    Following a print screen from varous commands such as "TP SHOWPARAMS" "TP ADDTOBUFFER" etc..
    Could you check again for me?
    Thanks in advance...
    G.R.
    *0000
    *0000
    I
    BSVK900675          |                    | |0000 |      |      |0000 |      |
    *0000
    *0000
    I
    BSVK900677          |                    | |0000 |      |      |0000 |      |
    *0000
    *0000
    I
    BSVK900678          |                    | |0000 |      |      |0000 |      |
    *0000
    *0004
    I
    BSVK900657          |                    | |0000 |      |      |0000 |      |
    *0000
    *0000
    I
    BSVK900659          |                    | |0000 |      |      |0000 |      |
    *0000
    *0000
    I
    BSVK900655          |                    | |0000 |      |      |0000 |      |
    *0000
    *0000
    I
    BSVK900661          |                    | |0000 |      |      |0000 |      |
    *0000
    *0004
    I
    BSVK900663          |                    | |0000 |      |      |0000 |      |
    *0000
    *0004
    I
    BSVK900665          |                    | |0000 |      |      |0000 |      |
    *0000
    *0000
    I
    BSVK900680          |                    | |0000 |      |      |0000 |      |
    *0000
    *0000
    I
    BSVK900681          |                    | |0000 |      |      |0000 |      |
    *0000
    *0000
    I
    BSVK900685          |                    | |0000 |      |      |0000 |      |
    *0000
    *0000
    I
    BSVK900687          |                    | |0000 |      |      |0000 |      |
    *0000
    *0000
    I
    BSVK900688          |                    | |0000 |      |      |0000 |      |
    *0000
    *0000
    I
    BSVK900690          |                    | |0000 |      |      |0000 |      |
    *0000
    *0000
    I
    BSVK900691          |                    | |0000 |      |      |0000 |      |
    *0000
    *0000
    I
    BSVK900692          |                    | |0000 |      |      |0000 |      |
    *0000
    *0000
    I
    BSVK900695          |                    | |0000 |      |      |0000 |      |
    *0000
    *0000
    I
    that makes 174 transports to be imported.
    tp finished with return code: 0
    meaning:
      Everything OK
    C:\Documents and Settings\bpradm>tp addtobuffer bsvk901395 bpr pf=d:\usr\sap\tra
    ns\bin\tp_domain_bsv.pfl -Dtransdir=d:\usr\sap\trans
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    This is tp version 340.16.09 (release 640)
    Warning: Parameter DBHOST is no longer used.
    Warning: Parameter DBNAME is no longer used.
    Addtobuffer failed for BSVK901395.
      Neither datafile nor cofile exist (cofile may also be corrupted).
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0247
    tp finished with return code: 247
    meaning:
      addtobuffer has problems with data- and/or cofile
    C:\Documents and Settings\bpradm>tp addtobuffer bsvk901395 bpr pf=d:\usr\sap\tra
    ns\bin\tp_domain_bsv.pfl -Dtransdir=d:\usr\sap\trans
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    This is tp version 340.16.09 (release 640)
    Warning: Parameter DBHOST is no longer used.
    Warning: Parameter DBNAME is no longer used.
    Addtobuffer failed for BSVK901395.
      Neither datafile nor cofile exist (cofile may also be corrupted).
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0247
    tp finished with return code: 247
    meaning:
      addtobuffer has problems with data- and/or cofile
    C:\Documents and Settings\bpradm>tp addtobuffer bsvk901396 bpr pf=d:\usr\sap\tra
    ns\bin\tp_domain_bsv.pfl -Dtransdir=d:\usr\sap\trans
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    This is tp version 340.16.09 (release 640)
    Warning: Parameter DBHOST is no longer used.
    Warning: Parameter DBNAME is no longer used.
    Addtobuffer failed for BSVK901396.
      Neither datafile nor cofile exist (cofile may also be corrupted).
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0247
    tp finished with return code: 247
    meaning:
      addtobuffer has problems with data- and/or cofile
    C:\Documents and Settings\bpradm>tp help
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    This is tp version 340.16.09 (release 640)
    usage:   tp <command> [argument(s)] [option(s)], where <command> may be one of:
    Exporting                   I Buffer Actions              I Disk Space
    EXPORT       I EXPWBO       I ADDTOBUFFER  I DELFROMBUFFERI CLEAROLD
    R3E          I VERSE        I SETSYNCMARK  I DELSYNCMARK  I CHECK
    SDE          I              I SETSTOPMARK  I DELSTOPMARK  I TESTOLD
    TST          I              I MARK         I UNMARK       I
                  I              I CLEANBUFFER  I              I
    Importing                   I Special Functions           I Information
    PUT          I              I LOCKSYS      I UNLOCKSYS    I SHOWBUFFER
    IMPORT       I CHNTABS      I LOCK_EU      I UNLOCK_EU    I COUNT
    CMD          I R3I          I WRITELOG     I GETPROTS     I SHOWPARAMS
    LIM          I MEA          I SAPSTART     I SAPSTOP      I GO
    R3H          I MVREPOS      I GETTBATGENT  I GETTRBATENT  I CONNECT
    ACT          I MVKERNEL     I GETDDXTTENT  I GETDDXTFENT  I CHECKIMPDP
    TACOB        I SDI          I GETOPENCORR  I CREATECOFILE I SHOWINFO
    GENTB        I GENT1        I PREPAREBUFFERI CREATEINFO   I GETOBJLIST
    GENT2        I GEN          I CONTP        I EXPCHK       I EXTRDOCU
    DIST         I XPA          I SHOWSEMAPHOREI SHOWSEMACLIENI GETCONVENT
    MVNTABS      I VERSI        I SETSEMAPHORE I DELSEMACLIENTI EXPLAINRC
    IMPSYNC      I DELIVER      I DELSEMAPHORE I GETTPSTATENT I
    For more details call tp with the desired command (and no other parameters)
    C:\Documents and Settings\bpradm>tp showparams  bsvk901396 bpr pf=d:\usr\sap\tra
    ns\bin\tp_domain_bsv.pfl -Dtransdir=d:\usr\sap\trans
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    This is tp version 340.16.09 (release 640)
    ERROR: : parameter -Dtransdir=d:\usr\sap\trans has wrong length
    Usage of command SHOWPARAMS:
      tp SHOWPARAMS <SAPSID> [options ...]
      Reads the parameter file and displays the current setting.
      Options:
         parname=<name>        display the value of the parameter <name> only
         pf=<TPPARAM>          specify a transport parameter file
         silent                redirect stdout to dev_tp in current directory
         -D"<entry>"           specify a parameter for tp
         -t<k>                 specify a trace level for tp
         tf=<filename>         specify the name of a trace file for tp
         shdwtadir=<tabname>   specify the name of a shadow TADIR
      Description of arguments:
         <TPPARAM>   (complete) path of a transport parameter file
         <entry>     a parameter description as in a tp parameter file
         <SAPSID>    R/3 system's name, (target or source whatever is appropriate)
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0206
    tp finished with return code: 206
    meaning:
      parameter %s has wrong length
    C:\Documents and Settings\bpradm>tp showparams bpr pf=d:\usr\sap\trans\bin\tp_do
    main_bsv.pfl -Dtransdir=d:\usr\sap\trans
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    This is tp version 340.16.09 (release 640)
    Warning: Parameter DBHOST is no longer used.
    Warning: Parameter DBNAME is no longer used.
    Parameters having their default value are displayed with a '>' as separator.
    Global settings:
    TRANSDIR : d:\usr\sap\trans\
    ALLLOG : ALOG0605.BPR              STOPONERROR >        9 SYSLOG : SLOG0605.BPR            REPEATONERROR>         9
    ABAPNTFMODE > t
    TP_VERSION :        266
    STOPIMMEDIATELY > 1 =TRUE
    NEW_SAPNAMES >    1 =TRUE    SQL_TRACE >          0 =FALSE
    DUMMY >          0 =FALSE
    CTC >          0 =FALSE       NBUFFORM :          1 =TRUE
    BUFFERFORMAT >
    SSFKEYS >
    SSFSIGNER >
    SSFLIB >
    SSFPAB >
    ALLOW_RC4 >    1 =TRUE   SID_LOG_FILES >          0 =FALSE
    IMPMON_MODE > NORMAL      IMPSMON_MODE > OFF
    TRACE2SERVER >          0 =FALSE
    DB-connection:
            CONNECT_MODE > USE_ENV
                 MOD_ENV >
                  DBTYPE : ora
    MSSQL_USEINTEGRATEDS >
            MSSQL_SCHEMA >
          DROPSTATISTICS >          1 =TRUE
        DBS_DB2_PLANNAME >
       RSDB_DB2PSLIBRARY >
    Distribution of transports:
           SYSTEM'S NAME : BPR                       VERS_AT_IMP > NEVER
       SEPARATE_DELIVERY >          0 =FALSE
             TESTSYSTEMS :
         DELIVERYSYSTEMS :
           SOURCESYSTEMS :
           TARGETSYSTEMS :
        SAPNAMES_LOGGING : ALL
             VERS_AT_EXP >          1 =TRUE
          CREATE_REPLIST >          0 =FALSE
    R3trans:
             R3TRANSPATH > R3trans.exe
             R3TRANSSTAT >
            LOCALR3TRANS >          0 =FALSE
           CLIENTCASCADE >          0 =FALSE
               RECCLIENT >
                LANGUAGE >
                     LSM > NONE
                     SLI >         -1
         CHECKMASTERLANG >          0 =FALSE
            RESTRICTLANG >
            IMPORTSHADOW >          0 =FALSE
          R3TRANSOPTIONS >
               FILESPLIT >          0
              ACC_IMPORT >          0 =FALSE
                DDACTIVE >          0 =FALSE
                   SMODI >          1 =TRUE
         PRESERVEMODINFO >          0 =FALSE
          CHEATCLIENT000 >          0 =FALSE
           LANGDELETIONS >          1 =TRUE
    Transport daemon:
               BATCHHOST >
               SYSTEM_NR >
               SYSTEM_PF >
              SAPEVTPATH > sapevt.exe
    Import in general:
                                                    MAINIMP_PROC >          1
                         >          0 =FALSE       LOGICALIMPORT >    0 =FALSE
    SETUNICODEFLAG >   0 =FALSE   DDINACTIVE >          0 =FALSE
    MAB >          1 =TRUE
    R3UP >          0 =FALSELOCK_CHECK_WAIT_TIME >          0
    EXP_CHECK_WAIT_TIME >          0                   W_IMPORT >          1 =TRUE
                 W_NEVER >          0 =FALSE
                K_IMPORT >          1 =TRUE              K_NEVER >          0 =FALSE
                T_IMPORT >          1 =TRUE              T_NEVER >          0 =FALSE
                C_IMPORT >          1 =TRUE              C_NEVER >          0 =FALSE
          BUFFERSNAPSHOT >          0 =FALSE
    PUT:
                PUTSTEPS > *=<Lw(H3A)dG
                STARTSAP >
                 STOPSAP >
               BUFFRESET >          1 =TRUE           BUFREFTIME >        180
                 LOCK_EU >          1 =TRUE          MC_ENQ_STEP >          1 =TRUE
              GENERATION >          1 =TRUE     RESET_TIMESTAMPS >          0 =FALSE
          TATAF_TOLERANT >          0 =FALSE         RESET_DBPOS >          0 =FALSE
           NTACT_TIMECMP >          0 =FALSE
      MVNTAB_LIST_FAILED >          1 =TRUE
    Kernelmove:
              KERNELMOVE >          0 =FALSE            CLEANIPC >          0 =FALSE
                 EXELIST >
                 FROMDIR >
                   TODIR >
          KERNELMOVEPATH >
            CLEANIPCPATH >
    Clearold:
            DATALIFETIME >        200            OLDDATALIFETIME >        365
          COFILELIFETIME >        365                LOGLIFETIME >        200
    Properties:
         SemaServer.Host : NULL
         SemaServer.Port : NULL
           tp.Semaphores : FILE
       tp.ConnectTimeout : 10000
    tp finished with return code: 0
    meaning:
      Everything OK

  • Error Patch IMPORT_PROPER phase

    Dear support,
    We were applying patches on Netweaver 2004s Oracle 10.2.0.2 Windows platform server. Basis patch 12 and it was successfull in Test mode , but during standard mode suddenly machine got restarted because of power problem.
    Now database and SAP is up and running , but i am unable to proceed with any of transactions ( like SPAM ) as i get <b>syntax_error</b>. Patch is in IMPORT_PROPER phase so i cannot reset until i do some database work.
    What i am just aware i need to check entries in PAT01 , PAT02 , PAT03 and TRBAT tables and delete entries from PAT01 there to reset the queue and run patch again.
    I can login to database with user SAPSR3 and there are entries for Basis patch 12 in table PAT01.Can anyone tell me further actions and querry which need to be executed to delete entry in detail , as i am having one week old backup which is not usefull for me.Please let me know safest way out of this issue.
    Please help me at earliest.
    Best Regards,
    AjitR

    praveen ,
    I havent deleted any entry from tables  , please find below
    SQL> select PATCH,STEPCOND,RET_CODE,MESSAGE from PAT01;
    PATCH                                                        STE RET_CODE
    MESSAGE
    SAPKB70012                                                   ?
    SQL> SELECT * FROM PAT02;
    no rows selected
    SQL> SELECT COUNT(*) FROM PAT03;
      COUNT(*)
            33
    SQL> SELECT COUNT(*) FROM PAT10;
      COUNT(*)
             1
    SQL> SELECT PATCH,STATUS,IMPL_MANDT from PAT10;
    PATCH                                                        STA IMPL_MAND
    SAPKB70012                                                   R   000
    SQL> SELECT RETCODE,CLIENT,ARGUMENT FROM TRBAT;
    RETCODE      CLIENT    ARGUMENT
    F
    logs are as below
    Transport request ; SAPKB70012
    SQL error 1089 accessing : ORA-01089 immediate shutdown in progress - no ope
    Main import
    Ended with Return code 12
    could you throw some light on the same.

  • SPAM version 36 is struck in import_proper phase of Prologue for crm rel700

    Hi Gurus,
    While updating the spam version to 36 in crm 700, its throughing the below message. I checked tp tool, consistency check, everything seems fine.
    any idea what may casue this problem, as my spam is struck in import_proper phase of Prologue
    The installation was stopped, since an error occurred during the phase  
      IMPORT_PROPER, which the Add-On Installation Tool is unable to resolve
      without your input.          
      After you have corrected the cause of the error, continue with the  
      import by choosing Continue in the queue display.    
      The following details help you to analyze the problem:                
          -   Error in phase: IMPORT_PROPER        
          -   Reason for error: TP_STEP_FAILURE        
         -   Return code: 0008          
       -   Error message: OCS Package ALL, tp step "6", return code 0008              
      Notes on phase IMPORT_PROPER        
       to be continued

    In this phase the system imports the Repository objects and the table  
       entries. The following are reasons why this phase may fail:    
       o   TP_INTERFACE_FAILURE: The tp interface could not be called.  
       o   TP_FAILURE: The tp program could not be executed. For more  
           information on this, see the SLOG or ALOG log file.    
       o   TP_STEP_FAILURE: A tp step could not be executed. To find the cause
           of the error, see the appropriate log, such as the import log.  
           If a tp step 6, N, or S is specified in the termination message, it  
           is a step that is independent of the transport request. You can vie  
           these logs in the log overview by choosing Import Steps Not Specifi  
           to Transport Request.                     
       Alternatively, see the logs in the following files in the log    
       subdirectory of your transport directory (usually /usr/sap/trans/log):  
            -   tp step 6: P<YY><MM><DD>.<SID>       
            -   tp step N: N<YY><MM><DD>.<SID>        
            -   tp step S: DS<YY><MM><DD>.<SID>                  
        To display these files, use the report RSPUTPRT or transaction AL11.  
      The Add-On Installation Tool requires that the Change and Transport  
        System (CTS) be configured correctly. For more detailed information,  
        read the online documentation available from Help -> SAP Library ->  
        mySAP Technology Components -> SAP Web Application Server -> BC Change
        and Transport System .          
        A list of the most important SAP Notes for Online Correction Support  
        (OCS) is available in SAP Note 97620, which is updated regularly.
    Regards - Munish

  • The import was stopped, an error occurred during the phase DDIC_ACTIVATION

    Dear all,
    When I import the SAP_BASIS support package SAPKB70019 , it appears the error as below :
    The import was stopped, since an error occurred during the phase
    DDIC_ACTIVATION, which the Support Package Manager is unable to resolve
    without your input.
    After you have corrected the cause of the error, continue with the
    import by choosing Support Package -> Import queue from the initial
    screen of the Support Package Manager.
    The following details help you to analyze the problem:
         -   Error in phase: DDIC_ACTIVATION
         -   Reason for error: TP_STEP_FAILURE
         -   Return code: 0008
         -   Error message: OCS Package SAPKB70019, tp step A, return code
             0008
    Notes on phase DDIC_ACTIVATION
    In this phase the imported Dictionary objects are activated. This phase
    can terminate due to the following reasons:
    o   TP_INTERFACE_FAILURE: The tp interface could not be called.
    o   TP_FAILURE: The program tp could not be executed. For more
         information, see the SLOG or ALOG log file.
    o   TP_STEP_FAILURE: The tp step DDIC activation could not be performed
         successfully. To see the cause of the error in the activation log,
         choose  Goto -> Log -> Queue.
         If you import two or more Support Packages in one queue, and you do
         not activate them in the correct sequence, activation errors may
         occur. In this case, the activation errors disappear when you repeat
         the activation run. To do this, choose Support Package -> Import
         Support Package Queue.
        A prerequisite of the Support Package Manager is that the Change and
        Transport System (CTS) is configured correctly. For more detailed
        information, read the online documentation available from Help -> SAP
        Library -> mySAP Technology Components -> SAP Web Application Server ->
        Change and Transport System .
        A list of the most important SAP Notes for Online Correction Support
        (OCS) is available in SAP Note 97620, which is updated regularly.
    I have used se11 to avtive the domain SEFS_CRAWL_ALGORITHM , but the error still exist.
    Hope anyone can help. Thanks!
    B.R
    Michael

    P762713 wrote:>
    > Hi ,
    >
    >     This is general issue now a days occuring in Support Packs .The only solution for this issue is to delete structure ::
    >
    > these were the structure deleted from system afterwards patches were installed successfully.
    >
    > /1PYXXFO/SAP_PAYSLIP_____L0001
    > /1PYXXFO/SAP_PAYSLIP_____T0001
    > /1PYXXFO/SAP_PAYSLIP
    >
    > /1PYXXFO/SAP_PAYSLIP_____L0020
    > /1PYXXFO/SAP_PAYSLIP_____T0020
    >
    > You can do this via Tcode se11 .give these info in data type & in turn you have to delete 1PYXXFO/SAP_PAYSLIP also.This has solved my issue & after this support pack went fine.
    >
    > Thanks..
    > Mohit
    >
    > Edited by: mohit gupta on Sep 23, 2009 9:15 AM
    Hi, mohit
          I have tried to use the t-code se11 to delete the structures, but the system telled me that they are all not exist .
    A part of the queue log as below:
       Field name KEY is reserved (Do not use structure as include in DB table)
       Field name PRIOR is reserved (Do not use structure as include in DB table)
       Field KEY: Component type or domain used not active or does not exist
       Exactly one field SPRAS of type LANG: Selection as text language possible
      Nametab for table /1PYXXFO/SAP_PAYSLIP_____L0001 cannot be generated
       Enhancement category for table missing
       Enhancement category for include or subtype missing
       Field name KEY is reserved (Do not use structure as include in DB table)
       Field name PRIOR is reserved (Do not use structure as include in DB table)
       Field KEY: Component type or domain used not active or does not exist
       Nametab for table /1PYXXFO/SAP_PAYSLIP_____L0020 cannot be generated
       Enhancement category for table missing
       Enhancement category for include or subtype missing
       Field name KEY is reserved (Do not use structure as include in DB table)
       Field name PRIOR is reserved (Do not use structure as include in DB table)
       Exactly one field SPRAS of type LANG: Selection as text language possible
       Enhancement category for table missing
    who can help me ?
    thank you very much
    BR.
    Michael
    Edited by: Michael Hong on Sep 23, 2009 12:36 PM

  • Support Pack General Question:- IMPORT_PROPER phase

    Hi All,
    Is there any command at OS level to complete IMPORT_PROPER phase of SPAM transaction (support pack import)?

    Hi ,
    Is there any command at OS level to complete IMPORT_PROPER phase of SPAM transaction (support pack import) in My QAS system............. ?
    I tried the following command in my DEV & QAS System.but not solved.
    C:\>tp cleanbuffer qas pf=myprofile.pfl
    This is tp version 320.56.89 (release 620)
    E-myprofile.pfl could not be opened.
    EXIT
    Error in myprofile.pfl: transdir not set.
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0208
    tp finished with return code: 208
    meaning:
      error in transportprofil (param missing, unknown,...)

  • Support Package still running in Import_proper phase ( KB70017)

    Dear all,
    When i appling  Basis Support Package ( KB70017) , still its running the import_proper phase and its running around 12 hours .
    kindly suggest me to resolve the issue
    Regards

    Dear all ,
    i applied Basis Patch it took long time and still its not complete so i restart the server .
    now i cant able to login SAP its giving Syntax error kindly advise me
    i found these are the logs in this directory usr\sap\trans\tmp logs
    1 , UMODPROT.SID log
    ETN080X*************************************************************************
    1 E0U531 "Report RSUMODSP (modified objects)"
    1 ETN252     Start date: "15.01.2010"
    1 ETN253     Start time: "11:40:03"
    1 ETN080 *************************************************************************
    3 E0U531 "Analysis for OCS Package Queue:"
    3 E0U531 "SAPKB70017"
    3 E0U531X"Special handling of SORTTABS tables..."
    3 E0U532X"Check objects of request" "SAPKB70017"
    3 E0U531X"Update modification information..."
    3 E0U531X"Summary:"
    3 E0U531 "No modified SAP objects found"
    1 ETN080X*************************************************************************
    1 E0U531 "Report RSUMODSP (modified objects)"
    1 ETN252     Start date: "15.01.2010"
    1 ETN253     Start time: "11:53:07"
    1 ETN080 *************************************************************************
    3 E0U531 "Analysis for OCS Package Queue:"
    3 E0U531 "SAPKB70017"
    3 E0U531X"Special handling of SORTTABS tables..."
    3 E0U532X"Check objects of request" "SAPKB70017"
    3 E0U531X"Update modification information..."
    3 E0U531X"Summary:"
    3 E0U531 "No modified SAP objects found"
    AMODPROT.SID log
    1 E0U532 "Report RSUMOD10_SP" "(Classification of Modified Objects)"
    1 ETN252     Start date: "15.01.2010"
    1 ETN253     Start time: "11:54:57"
    1 ETN080 *************************************************************************
    3 E0U533X"Fetch objects to be adjusted" "(SPDD)" "from UMODOBJ..."
    4 E0U533 "Fetch objects from request" "SAPKB70017" "..."
    3 E0U532 "0" "objects to be adjusted were fetched"
    CMODACT.SID log
    ETN085X"OCS Package Queue Import:" "15.01.2010" "10:23:11" " "
    1 ETN085 "(De)activate customer exits:" " " " " " "
    1 ETN085X"OCS Package Queue Import:" "15.01.2010" "11:23:22" " "
    1 ETN085 "(De)activate customer exits:" " " " " " "
    IMODPROT.SID log
    1 E0U532 "Report RSUMOD20_SP" "(Special Handling of IS Tables)"
    1 ETN252     Start date: "15.01.2010"
    1 ETN253     Start time: "09:45:14"
    1 ETN080 *************************************************************************
    Regards
    1 ETN080X*************************************************************************
    1 E0U532 "Report RSUMOD20_SP" "(Special Handling of IS Tables)"
    1 ETN252     Start date: "15.01.2010"
    1 ETN253     Start time: "11:08:39"
    1 ETN080 *************************************************************************
    1 ETN080X*************************************************************************
    1 E0U532 "Report RSUMOD20_SP" "(Special Handling of IS Tables)"
    1 ETN252     Start date: "15.01.2010"
    1 ETN253     Start time: "11:54:58"
    1 ETN080 *************************************************************************

  • Unable to send keystrokes and Mouse strokes in during WinPE phase with iDRAC7

    Primary Site running SCCM 2012 R2
    Unable to send keystrokes and Mouse strokes in during WinPE phase. The system is awaiting response "password" on Task Sequence step however the machine won't accept keyboard and mouse inputs. This happens with iDRAC7 Version1.0.
    Trying to image Dell servers with SCCM 2012 R2. The desktops work fine and able to image.

    Download and install iDRAC7 firmware to revision 1.57.57 or later.

  • EBS 12.1.1 failed during autoconfig phase of upgradation

    Hi,
    I'm in process of upgradation of ebs 11.5.9 to r12.1.1 on solaris 9. database is 9.2.0.8.
    during the upgradation phase autoconfig is failed with errors.
    ADX Database Utility
    getConnectionUsingAppsJDBCConnector() -->
    APPS_JDBC_URL='jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=scciapps)(PORT=1571)))(CONNECT_DATA=(SID=test)))'
    Trying to connect using APPS_JDBC_URL
    Exception occurred: java.sql.SQLException: ORA-01017: invalid username/password; logon denied
    Trying to get connection using SID based connect descriptor
    getConnection() -->
    sDbHost : scciapps
    sDbDomain : sharjah.gov.ae
    sDbPort : 1571
    sDbSid : test
    sDbUser : APPS
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@scciapps.sharjah.gov.ae:1571:test
    Exception occurred: java.sql.SQLException: ORA-01017: invalid username/password; logon denied
    Trying to connect using SID as ServiceName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=scciapps.sharjah.gov.ae)(PORT=1571))(CONNECT_DATA=(SERVICE_NAME=test)))
    Exception occurred: java.sql.SQLException: ORA-01017: invalid username/password; logon denied
    Trying to connect using SID as ServiceName.DomainName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=scciapps.sharjah.gov.ae)(PORT=1571))(CONNECT_DATA=(SERVICE_NAME=test.sharjah.gov.ae)))
    Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
    ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
    Connection could not be obtained; returning null
    where i use the same username and password of apps of existing database/application.
    anyone have idea about that...?
    Thanks,

    yes, all the values are correct.
    As I've given existing database port number, sid and server info of 11.5.9.
    below are some information from installation log.
    Oracle Applications Rapid Install Wizard Install log
    >> Using Rapid Wizard Version : 12.1.1.9
    >> Install session started : Mon Jan 31 13:35:43 GST 2011
    >> Rapid Wizard source location : /oracle/StageR12/startCD/Disk1/rapidwiz
    >> Command Line arguments for this run :
    =================================================================
    Install Session Information
    Host Name : scciapps.sharjah.gov.ae
    Host Operating System : Solaris SPARC
    User running Install : appltest
    =================================================================
    InstUpgPanel
         User action : Upgrade Oracle Applications file System
         Install type : Upgrade
    PortPanel
              Selected port pool:
                   Database Port : 1571
    ADX Database Utility
    getConnectionUsingAppsJDBCConnector() -->
    APPS_JDBC_URL='null'
    Trying to get connection using SID based connect descriptor
    getConnection() -->
    sDbHost : scciapps
    sDbDomain : sharjah.gov.ae
    sDbPort : 1571
    sDbSid : test
    sDbUser : APPS
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@scciapps.sharjah.gov.ae:1571:test
    Connection obtained
    but it fails during autoconfig phase.
    Thanks,

  • What are supported device attributes on iOS during enrollment phase?

    I'm installing configuration profile using over-the-air (OTA) enrollment. What are supported device attributes on iOS during first phase payload? I'm sending sth like:
    <plist version="1.0">
        <dict>
            <key>PayloadContent</key>
            <dict>
                <key>Challenge</key>
                <string>challenge</string>
                <key>DeviceAttributes</key>
                <array>
                    <string>UDID</string>
                    <string>DEVICE_NAME</string>
                    <string>VERSION</string>
                    <string>PRODUCT</string>
                    <string>MAC_ADDRESS_EN0</string>
                    <string>IMEI</string>
                    <string>ICCID</string>
                </array>
                <key>URL</key>
                <string>https://my-profile-server</string>
            </dict>
            <key>PayloadDescription</key>
            <string>Enter device into the encrypted profile service</string>
            <key>PayloadDisplayName</key>
            <string>Profile Service</string>
            <key>PayloadIdentifier</key>
            <string>com.xxx.mobileconfig.profile-service</string>
            <key>PayloadOrganization</key>
            <string>XXX</string>
            <key>PayloadType</key>
            <string>Profile Service</string>
            <key>PayloadUUID</key>
            <string>1a21d4dd-6723-45c5-a184-c3fe0075db14</string>
            <key>PayloadVersion</key>
            <integer>1</integer>
        </dict>
    </plist>
    Is there any more attribute that I can get from the device in this payload? For example serial number? Is there any official list of possible attributes? Any help would be much appreciated. Thanks.

    May be here:  http://www.apple.com/support/ios/keynote/

  • SPAM update in IMPORT_PROPER phase

    Dear All,
    I have installed SAP Web Neweaver 04s as ABAP on MSSQL database windows
    OS and upgraded kernel 640 patch 175.
    But now when i go to import SPAM /SAINT from level 17 to 23 ie.
    SAPKD64023 then its running in IMPORT_PROPER Phase since last 5-6 hrs.
    PLEASE SUGGEST how to speed up my process??
    Log is as below:
    Log Overview for SAPKD64023
    SAPKD64023 SPAM/SAINT Update - Version 640/0023
    BPW System BPW
    Generate Transport Information File 02.01.2008 13:41:45 (0)
    Successfully Completed
    Test Import 02.01.2008 13:41:46 (0) Successfully Completed
    Import Request Piece List 02.01.2008 13:41:47 (4) Ended with Warning
    Import ABAP Dictionary Objects 02.01.2008 13:41:52 (4) Ended with
    Warning
    02.01.2008 10:54:46 (4) Ended with Warning
    02.01.2008 13:41:52 (4) Ended with Warning
    ABAP Dictionary Activation 02.01.2008 14:13:28 (4) Ended with Warning
    Import steps not specific to transport request
    ABAP Dictionary Distribution 02.01.2008 14:23:31 (4) Ended with Warning
    pls help me ASAP.
    Regards & Thanks,
    Ankita.

    Hi Ankita,
    I advice you to leave it for the moment and wait until it finishe that particular stage and check for the workporcess overview which report its executing at the back.Dont stop the process forcefully as it might cause inconsistency.
    Regards,
    Iqbal

  • SPAM update during prepare phase

    Hi all,
    I am doing an upgrade from 40B to 4.7 and finished my preparation before Prepare phase.
    Initialization phase is also completed successfully during prepare phase.
    Unfortunately i forgot to upgrade my SPAM to the latest and now i am unable to continue with Prepare
    phase because it is asking me to upgrade SPAm.
    And when i am performing SPAM update , it is giving warning and unable to continue further
    as " Caution: Upgrade is still running. Patches may be lost.
    Message no. TN 153 "
    Please let me know the way out , as i have also restarted my SAP and database but same warning still appear.
    Regards,
    RR

    I suggest to cancel PREPARE, apply SPAM update and after that start PREPARE from scratch.
    Cheers

  • Support Packages Installation Stops at IMPORT_PROPER Phase

    Hi Sap stars,
                                I have started Installation of support packages for PI 7.1 Cluster Server , It got stuck at phase Import_Proper
                                and do not do anything , Then I executed the TP R3I .....COMMAND Which executed successfully
                                Then I executed the Command
                                tp showbuffer SID tag=spam pf=G:\usr\sap\trans
    \bin\TP_DOMAIN_SID.PFL
    This is tp version 375.33.68 (release 710, unicode enabled)
    SID buffer:
    SAPKB71007          |                    | |has already been imported completely
    that makes 0 transports to be imported.
    tp finished with return code: 0
    meaning:
    Everything OK
    But still in SPAM it is showing the IMPORT_PROPER status in RED
    Could anyone tell me how can this status get changed and Import other Support Packages
    Thanks In Advance
    Anil Kumar

    Hi Raghu,
    I have used the tp r3i command when I got stuck in Import_proper Phase It ended with TP retun code 008
    2EETW109 TABLE "SQL_TOOL_GROUPT" does not exist in Nametab
    When I try to run any Transaction Code it is throwing an Dump
    OS-Windows, Database_Sqlserver 2005 Application-PI 7.1
    Can u pls suggest me what can I do to sort this issue
    Thanks In Advance
    Anil

  • SPAM IMPORT_PROPER Phase delay

    Hi all,
    I have SOLMAN 7 EHP1 SP 24. in a windows host, with Oracle database.
    I just update my spam to latest version 7.01/0041
    then i need to updatethe component "ST-ICO 150_700"  my actual SP is 24, i need get updated to  patch 0025.
    I add to the queue only this ST-ICO component. 
    In sm37 I see the job running without errors.
    Job                              Spool Job Doc Job CreatedB Status          Start date Start time Duration(sec.) Delay (sec.)
    OCS_QUEUE_IMPORT                               71360900     Active          19.01.2011 16:21:02          55.578            0
    In spam in action log see that all previous phases was successfully finished, for example the latest phase was  Import phase 'DDIC_ACTIVATION' .
    but in  IMPORT_PROPER Phase is taking more than 16 hours right now.
    If is just a ST-iCO component why this take so long? Is normal this behaviour?
    Where can i see detailed log of actions, or how can i ensure me that all is running ok?
    Thanks a lot
    update: in tp system log i see so many lines with this:
    WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17060), I'm waiting 2 sec (20110120064823). My nam
    WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17070), I'm waiting 2 sec (20110120064853). My nam
    WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17080), I'm waiting 4 sec (20110120064921). My nam
    WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17090), I'm waiting 2 sec (20110120064952). My nam
    WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17100), I'm waiting 1 sec (20110120065010). My nam
    WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17110), I'm waiting 3 sec (20110120065038). My nam
    WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17120), I'm waiting 5 sec (20110120065117). My nam
    WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17130), I'm waiting 1 sec (20110120065153). My nam
    WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17140), I'm waiting 4 sec (20110120065222). My nam
    WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17150), I'm waiting 1 sec (20110120065259). My nam
    WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17160), I'm waiting 2 sec (20110120065332). My nam
    WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17170), I'm waiting 3 sec (20110120065404). My nam
    I wiil try restart the import .
    Edited by: Manfred Kaufmann on Jan 20, 2011 1:55 PM

    Thanks for the tip. This seemed to resolve my issue.

Maybe you are looking for