SAP Applications and Business Suite Installed on an SAP System

Hi to all SAP gurus,
I have a couple of questions:-
1) Is there any way to find out about the SAP applications installed on an SAP system? I used CCMS to find out about the Installed SAP
components. But does this list give the correct information? Also, can we find out which are the major and minor components from this list?
2) Can there be more than one business suite (CRM, SRM, SCM etc.) installed on a single SAP system? Or is it always the case that a single SAP system can have only one business suite installed on it so that it can either be a CRM system, SRM system or something else.
3) Is there any way (Any database table or RFC function) I can find out out about the business suite installed on a particular SAP system? One thing I saw in SAP GUI is that the title bar reads "Customer Relationship Management" if it is a CRM system. Is this a fool-proof way to find out whether an SAP system is a CRM system, SRM system etc. If yes, will this information be stored in a database table or is there any RFC function so that I can get this data programatically?
Please bear with my BIG questions. I would be grateful if any of you guys can help me on these questions. Please let me know if I have to provide clarity on any of my queries. Thanks in advance

Hi Mike,
Thanks a lot for your suggestions.
I did some research towards this as suggested by you.
1) I tried out SPAM. But this is giving more or less the same information that I am already getting using the database table "CVERS" or the RFC function module "DELIVERY_GET_INSTALLED_COMPS". Both of these give information about the installed SAP components. But these modules don't give the precise information as to which particular business suite application is installed on the SAP system.
2) I checked out the site -http://service.sap.com/instguides but couldn't get much help on here. I couldn't exactly get any information about the combinations of the business suite applications
that can be installed on an SAP system.
However, I was curious about one thing which I observed on my SAP system. The SAP GUI title bar reads "SAP Easy Access Customer Relationship Management". Can we be come to a conclusion that this is an SAP system with CRM installed on it?
Also, the installed components for this system lists "BBPCRM" as one of the application component. Can we say that this is a CRM system by looking at this? If yes, are you aware of such a similar component for the other applications SRM, PLM, SCM which tells us about the business suite application installed on the SAP system?
3) I did some rigorous search for RFC function modules that give the information I need. I came across 2 RFC function modules which give information on the SAP applications installed on an SAP system:-
a) TERM_GET_TOPLEVEL_COMPONENTS
b) SKWF_APPLS_GET
The function module "TERM_GET_TOPLEVEL_COMPONENTS" is showing a list of business suite applications installed but I am not sure if it's giving the correct information because it shows both CRM and SRM in the applications list for an SAP system.
I'd be most interested for your further suggestions regarding this.
Thanks again
- John

Similar Messages

Installing Oracle Applications E-Business Suite R12 error

hi everyone
i have error while installing Oracle Applications E-Business Suite R12 on Windows server 2003 R12
plz help me
this is log file:
Processing DriverFile = E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adriapps.drv
Running Instantiation Drivers for E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adriapps.drv
instantiate file:
source : E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adrunias.cmd
dest : E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunias.cmd
backup : E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunias.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_erp\out\templbac\adrunias.cmd
instantiate file:
source : E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adrunat.cmd
dest : E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunat.cmd
backup : E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunat.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_erp\out\templbac\adrunat.cmd
Step 0 of 5
Command: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunias.cmd
Processing Step 3 of 5
Step 1 of 5
Command: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunat.cmd
Processing Step 4 of 5
instantiate file:
source : E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
instantiate file:
source : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
dest : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
instantiate file:
source : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
dest : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
instantiate file:
source : E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
instantiate file:
source : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
dest : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
instantiate file:
source : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
dest : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
instantiate file:
source : E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
instantiate file:
source : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
dest : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
instantiate file:
source : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
dest : E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
instantiate file:
source : E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
instantiate file:
source : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
dest : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
instantiate file:
source : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
dest : E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
Database Availability
command: cmd.exe /c E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd E:\oracle\VIS\db\tech_st\11.1.0\VIS_erp.cmd sqlplus E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
'E:\Oracle' is not recognized as an internal or external command,
operable program or batch file.
RW-50011: Error: - Database ORACLE_HOME connection test has returned an error: 1
command: cmd.exe /c E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd E:\oracle\VIS\inst\apps\VIS_erp\ora\10.1.2\VIS_erp.cmd sqlplus E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
'E:\Oracle' is not recognized as an internal or external command,
operable program or batch file.
RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 1
Configuration Upload
uploading config file at D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\08030118\conf_VIS.txt
AppsConfig : 'config.txt' uploading...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : erp
sDbDomain : erp
sDbPort : 1521
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@erp.erp:1521:VIS
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=erp.erp)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Failed upload of config file at D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\08030118\conf_VIS.txt
Environment File
RW-50016: Error: - Database ORACLE_HOME environment file was not created:
File = E:\oracle\VIS\db\tech_st\11.1.0\VIS_erp.env
RW-50016: Error: - Apps ORACLE_HOME environment file was not created:
File = E:\oracle\VIS\inst\apps\VIS_erp\ora\10.1.3\VIS_erp.cmd
RW-50016: Error: - iAS ORACLE_HOME environment file was not created:
File = E:\oracle\VIS\inst\apps\VIS_erp\ora\10.1.2\VIS_erp.cmd
RW-50016: Error: - APPL_TOP environment file was not created:
File = E:\oracle\VIS\apps\apps_st\appl\VIS_erp.cmd
RW-50016: Error: - ADOVARS environment file was not created:
File = E:\oracle\VIS\apps\apps_st\appl\admin\adovars.cmd
RW-50016: Error: - APPSCONFIG was not created:
File = E:\oracle\VIS\apps\apps_st\appl\admin\adconfig.txt
DBC File
RW-00023: Error: - DBC file was not created:
File = E:\oracle\VIS\inst\apps\VIS_erp\appl\fnd\12.0.0\secure\VIS.dbc
HTTP
checking URL = http://erp.erp:8000
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Help Page
checking URL = http://erp.erp:8000/OA_HTML/help
RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Virtual Directory
RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP
checking URL = http://erp.erp:8000/OA_HTML/jtfTestCookie.jsp
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Login Page
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.

Processing DriverFile = E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adriapps.drvYou cannot use spaces in the directory/file names, so I believe those errors are because you are using a space in the directory name (Oracle R12) -- Please change the directory name to another name with no space (i.e. OracleR12) and retry the installation then.
Thanks,
Hussein

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

Can office 2013 home and business be installed in windows server?

Can office 2013 home and business be installed in windows server?

Hi,
Which is the operating system version of your windows server? According to the requirements in the link below, it seems that it can be install on Windows server 2008 R2 and Windows Server 2012.
In addition, please view the detailed requirements to see if your system is supported.
http://www.microsoftstore.com/store/msusa/en_US/pdp/Office-Home-and-Business-2013/productID.259321600
Best regards,
Susie

I get missing plug-in error when opening my online bill which is in PDF format. I am using a 2010 Macbook with the latest version of Safari and Adobe suite installed in my computer. Why do I get this error? What should I do?

I get missing plug-in error when opening my online bill which is in PDF format. I am using a 2010 Macbook with the latest version of Safari and Adobe suite installed in my computer. Why do I get this error? What should I do?

In relation to my previous inquiry regarding inability to view a pdf file using Safari...
Is it possible that I can view other online bills from other website but not this particular bill from one specific website?
Sorry if I missed any important point in this article -->Apple Safari 5.1 and Adobe Reader/Acrobat Advisory
Thanks again!

Does SAP test and certify MII against the latest operating system patches?

Does SAP test and certify MII against the latest operating system patches?

If by latest OS patches you mean - does SAP retest MII every time MS puts out a new patch or critical update, then the answer would be no (probably not overly surprising).
This would be more impacted in 11.5 because of IIS and the only-Windows operating system, but with v12.x and the platform/OS combinations supported by NetWeaver, MII is really abstracted from the O/S through NetWeaver so that would be the angle to pursue with regard to re-testing and validation. I most assuredly cannot speak to the validation process for NetWeaver pertaining to operating system patches and updates, but I would assume OS service pack levels would be dealt with according to release cycles, but it would be very reactive for every patch that comes along for each of the operating systems in the matrix (http://service.sap.com/pam).
Regards,
Jeremy

Help with 11i E-Business Suite Install on Windows XP

I've tried unsuccessfully to install the E-Business Suite on Windows XP machine. I repeatedly get the following message during the install (I start from a clean restored environment each time) " RW-20001 Error: Unzip failed: Insufficient disk space: Please create enough space for the intstall". I get this message even though I have only used 100GB of a total of 500GB. I'm installing from DVDs provided by Oracle.
I also get an error message related to the "Listener". The detail of this message is included below.
Any suggestions to get past this would be appreciated.
Question on the Domain Name Configuration:
When i follow the instructions from a previous thread and do
C:\ipconfig I get the following:
Connection-specific DNS Suffix: PMSC.COM
IP Address : 192.168.0.103
I added PMSC.COM per the instructions in the thread.
The original entry in the host file was:
127.0.0.01 localhost
It is now:
127.0.0.01 localhost
127.0.0.01 localhost.PMSC.COM
I'm trying to set this up as a standalone installation with everything on the harddrive of this computer. I'm confused as to what the correct host entry should be and if this is the cause of my intallation failures. I can provide as much information as possible to help diagnose my probelms. Thanks.
The only error messages I can find in the log files show a problem with the Listener. The error message is as follows:
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 05-JAN-2007 17:30:43
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCPMSCDEV))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=pmsc_main.pmsc.com)(Port=1521))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 05-JAN-2007 17:30:44
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
System parameter file is C:\oracle\pmscdevdb\9.2.0\network\admin\PMSCDEV_pmsc_main\listener.ora
Log messages written to c:\oracle\pmscdevdb\9.2.0/network/admin\pmscdev.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCPMSCDEVipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PMSC_Main.PMSC.COM)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCPMSCDEV))
STATUS of the LISTENER
Alias PMSCDEV
Version TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
Start Date 05-JAN-2007 17:30:44
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File C:\oracle\pmscdevdb\9.2.0\network\admin\PMSCDEV_pmsc_main\listener.ora
Listener Log File c:\oracle\pmscdevdb\9.2.0/network/admin\pmscdev.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCPMSCDEVipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PMSC_Main.PMSC.COM)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PMSCDEV" has 1 instance(s).
Instance "PMSCDEV", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
addlnctl.cmd exiting with status 0
Please refer to the remaining logs on middle tier at - c:\oracle\pmscdevappl\admin\PMSCDEV_pmsc_main\log\01050527.log
Any suggestions to get past this would be appreciated.

1. Make sure the user installing the apps has admin priviledges
2. Create a staging area from the DVD if you can - since you have so much space on your system, then attempt the installation from the staging area. The perl script to use is already on the DVD - adautostg.pl
3. > Connection-specific DNS Suffix: PMSC.COM
     IP Address : 192.168.0.103
and you added
     127.0.0.01 localhost.PMSC.COM, I feel it should have been
     192.168.0.103 localhost.PMSC.COM ( if localhost is your server name. Adding this will nto affect anything)
although I can see from your log file, that the server name is pmsc_main, if so you have to add the servername.domainname.com to the host file too, such as
     192.168.0.103 pmsc_main.pmsc.com.
Essentially, when you ipconfig, it has to return pmsc_main.pmsc.com against the IP address of your server - i.e. 192.168.0.103 and / or 127.0.0.01
Basically, see the following threads:
a. How to Install 11.5.10 on Win XP
b. Oracle EBS 11.5.10.2 Installation Steps
c. http://forums.oracle.com/forums/thread.jspa?threadID=447193&tstart=0
Note: To clean your system of previous installations, see the following if you have metalink -
Note 107961.1 How To Clean Out A Previous Oracle Applications Installation On Windows NT,
however, if you dont have access to metalink, do the labour of deleting every reference to the failed installations on your system and the registry (CAREFUL! if you are up to it)

Is It Necessary to Install Visual C++ before Oracle E-business suite Instal

Hi Gurus/Experts
I have Downloaded all 45 Files. NoW
Is it Necessary to Install Visual C++ before Oracle E-business Suite.
And Also How much Space ORacle E-business suite will take After Installation.....I am Having 100 GB free space

Hi,
I have Downloaded all 45 Files. NoW
Is it Necessary to Install Visual C++ before Oracle E-business Suite.Yes, it is a pre-req. and it is required for the installation and for relinking the executable files.
Note: 761567.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server
And Also How much Space ORacle E-business suite will take After Installation.....I am Having 100 GB free spacePlease see the installation manual, it is mentioned for fresh database installation and for vision demo database installation.
Oracle Applications Installation Guide: Using Rapid Install
http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121oaig.pdf
Thanks,
Hussein

Launching a page from Oracle Applications (E-Business Suite) 11i

I have been trying to get a page in an APEX application to authenticate automatically from a menu function in Apps. I have been working from these instructions:
http://www.oracle.com/technology/products/database/application_express/pdf/Extend_Oracle_Applications_11i.pdf
I have created the procedures, functions etc as required and have set up the menu entry in apps. However, whenever I try to launch the application, the e-business suite login page is shown. The page doesn't display an error however the URL has the following:
http://MYHOST:MYPORT/OA_HTML/AppsLocalLogin.jsp?requestUrl=APPSHOMEPAGE&cancelUrl=http%3A%2F%MYHOST%3AMYPORT%2Foa_servlets%2Foracle.apps.fnd.sso.AppsLogin&langCode=US&errText=Invalid+Function.++Please+contact+the+System+Administrator.+Please+login+again.&username=MYUSERNAME&s1=DqwnJQDrCfPsNs0fP7nn-g..I have ommitted some info such as the host and port for security reasons.
I have tried several things such as editing out parts of the authentication procedure and passwing with no parameters but none work. Has anyone else successfully done this and if so, do youhave any pointers?
Any help would be much appreciated!
Cheers,

I've searched metalink for info on this however everything seems to point to simply having the user type in their username and password. I need to be able to seamlessly pass the credentials across from apps to apex.
Anyone an ideas!? :)
Thanks

How to install FLEX in SAP WAS and How to deploy project into SAP EP ?

Hi.
I want to create SAP EP Contents using FLEX and I have serveral question about this.
1. How to install Flex into SAP EP and What do I have to install ?
2. When we developing SAP EP Contents using FLEX,
Which Tool do I have to use ? (NWDS or Flex Builder)
3. After we develop contents, How can I deploy into SAP EP and
How to create iView for Flex Application ?
Sorry for many question.
Kindly explain this.
Regads, Arnold.

Hi Arnold,
here my answers to your questions:
1) You don't need to install flex under EP, you need only adobe flash player 9 on EP
2) If you want to develop a SAP Ep cont using Flex, you need adobe flex builder 2 or 3 (ide based).
3)You can store under any EP folder (es. KM) the .swf object and html page of FLEX application, create an iView and call the url link
or load the .swf as mime object in BSP on backend syst, include in a bsp page and create iView for bsp..
Regards
Raffaele

SAP authentication and SSO into BI4 with multiple SAP systems

We have already setup SAP authentication and SSO between ECC6 and BI4, e.g. to run CR 2011 reports with data based on ECC infosets, or BEx (operational BI on ECC). ECC is the main point of entry for users, so ECC user accounts and role imports are used in BI4.
Now if we add BW to this, with Crystal or WebI or Analysis OLAP sourcing data from BW, can we still leverage detailed authorizations in BW on the corresponding BW user - with user accounts and role imports in BI4 still being ECC-based?

Hi,
Let's say the trust relationship is setup between those systems. Then the simple example is to use Enterprise authentication in BI4, and assertion tickets are issued when making requests to ECC or BW. I assume LDAP/AD authentication would work as well.
>> You also have to setup trust between the BI 4 and ECC & between BI4 and BW. Thats part of the setup for the SSO Token Service.
But does this scenario rule out SAP authentication or not? I was hoping that I can still logon to BI4 with an ECC-issued logon ticket, and then BI4 would nevertheless issue assertion tickets for my BW alias.
>> And that is still possible. Setup the SSO Token Service, setup the aliases for the users. then you could logon with ECC credentials and run a BW report because the token service would then generate the token towards the BW system.
ingo

I have a MacBook (mid 2009) running 10.8.3 and want to install a Windows operating system. Which version of Boot Camp and which version of windows do I need.

I have a MacBook (mid 2009) running 10.8.3 and need to install Windows, at least XP, to run some software for work. What version of Boot Camp will work and where do I get a licensed copy of XP or Windows 7

The version of Boot Camp on your Mac will work, you must buy a copy of Windows 7 or 8 (not XP)
Windows drivers can be downloaded from here.

SAP XI and Business Process Modelling and Monitoring

hi All,
Could anybody tell me whether SAP XI has any Business Process Modelling tools or any Process Monitoring tools?
If any, are these analogous to IBM WBIs Modeller and Monitor? Also does SAP XI provide any human interaction?
Regards,
Shree Norway

Hi,
In the XI-Repository you can build Business Procces with the Process Builder.
for Monitoring you can use the Workflow Monitoring on XI.
See also Transaction "SXMB_MONI_BPE"
Regards,
Robin

Gateway on cloud and Business Suite on premise

Hi
Are there any guides or blogs that can help install Fiori with the Frontend Server on cloud and the backed server on company premise?
Best practices or case studies will be helpful.
regards
AKD

Hi AKD,
Almost all the Fiori content is posted or linked as part of the "What is SAP Fiori UX?" landing page here. Most Fiori Discussions are in the SAP for Mobile community like the landing page. There are also some SAPUI5 Fiori Discussions in the UI Development Toolkit for HTML5 Developer Center.
Regards, Mike
SAP Customer Experience Group - CEG

Rate application and business rule Currency Converison

Hi experts,
Could anyone help me about the following confusion? thanks.
Typically if talking about currency translation, we have to find a way to find out source currency, target currency and rate to calculate.
According to BPC logic(If i was right)
1) source currency is determined from property of dimension Entity.
2) Rate type is decided by Account dimension .
My questions are:
1) where could I define the target currency I convert to ? I have to point out when running DM package? I read from document - we can specify G or R type currency in currency dimension, does that mean the conversion will run on each of them in default way?
2) what will happen if currency defined in Entity dimension's property is NOT identical with currency of transaction data stored in Legal Application?
Our task is to convert data stored in Legal App, isn't it?
3) If you check Rate application, there is only one field to input currency. Why not two currencies are ready to input? Field currency A and currency B, then rate of conversion?
Your help is much appropriated.
Thanks.

When the data is loaded in transaction currency , then make sure you dont run Currency Translation program for that data region . If currency translation ran for that data region , program offsets all amounts that are loaded in transaction currency . Check 4 th page of this very good [blog|http://www.sapdiary.com/index.php?view=article&catid=76%3Asap-business-objects-overview&id=2522%3Asap-network-blog-bpc-for-net-weaver&format=pdf&option=com_content&Itemid=76] on Currency Translation by Richard Jabbour.
The standard behavior of currency conversion expects LC to be entered. If one does nothing
but installs the program call in FXTRANS and Default logic, an entry in NON LC currency
members will result in an immediate offsetting negative amount negating the entry.
Hope this helps.

SAP Applications and Business Suite Installed on an SAP System

Similar Messages

Maybe you are looking for