SAP Audit Management - Unplanned Audit checkbox greyed out

Dear All,
I am facing this issue of Unplanned Audit coming in check box while creating an Audit(Tcode PLMD_AUDIT).
When i try to create an Audit it shows Unplanned Audit as check mark and disabled. Why is this so?
I have created the Audit Plan before and then while creating Audit Unplanned Audit CheckBox is coming greyed out.
Please tell about it.
Regards,
Deepanshu

Hello,
Audits created or assigned after the audit plan is approved, are marked as Unplanned Audits by the system. You need to create and assign all the audits to the audit plan, then approve the audit.
In this case, you might detach the audit from the audit plan, reverse the approval of the audit plan and re-assign the audit to the audit plan to have the check-box unchecked.
Regards.

Similar Messages

  • TS3989 in windows iCloud Control Panel 3.0, photos checkbox grey out! what should i do?

    in windows iCloud Control Panel 3.0, photos checkbox grey out! what should i do?

    Have had some success with multiple computers running Windows 7, Vista, and Windows Server 2008 doing the following with iCloud Control Panel 3.1 (combination of several different remedies posted in forum):
    Sign out of iCloud Control Panel
    Open Task Manager and End all Apple iCloud and Photostream processes
    Delete the files from the Directory C:\Users\[your user name]\AppData\Roaming\Apple Computer\Mediastream
    Open iCloud Control Panel and sign in with apple ID
    If Photo option is still greyed out, sign out and sign back in with iCloud email address and password.
    This has worked for seven users that I support across several different windows hardware platforms.  Good luck!

  • Power Manager - Battery Stretch options greyed out

    When I am running on battery, the various checkboxes for the Battery Stretch options are greyed out. Normally they are only greyed out when running on AC power, but mine are greyed out all of the time. How do I fix this?
    I suspect became got corrupted in the registry. I had the problem described at http://www.brandlehner.at/Brandlehner/cab_blog.nsf​/d6plinks/CBRR-6YWBNV but managed to fix it.
    Windows XP SP3, T61 7551-V51, Power Manager 1.73, Power Management Driver 1.60.0.4.
    Any ideas would be greatly appreciated, thanks.

    Hi,
    in case you want to use this option properly, make sure, that you have the latest version of Power manager, Poewr management utility, System interface driver and Hotkey installed.
    In case once of them is older verison, especially Power management driver, then this situation amy appear.
    Let me know you system type and the model .
    Cheers

  • Deploy to single managed server checked and greyed out while performing upgrade to EPM 11.1.2.4

    Hi Gurus,
    We are trying to upgrade EPM from 11.1.2.2 to EPM 11.1.2.4 and have applied the maintenance release successfully.
    Issue:
    When we are trying to configure EPM 11.1.2.4 and are providing the same Shared Service database details, at the summary screen, we are not able to uncheck the option "Deploy to Single Managed server" which is checked and is greyed out.
    We have tried the following:
    1. We updated the HSS_COMPONENT_PROPERTY_VALUE table  and updated the PROPERTY_NAME "isCompact" to false.
    2. Modified the config.xml file located at EPMSystem/config and epmsystem1/config to remove the property for compactState.
    We are still having the issue where we are not able to uncheck the option for Compact Deployment. Any help would be appreciated.
    Thanks in advance.

    As it is a maintenance release and it deployed as a single managed server then you will not be able to change the deployment type when applying the maintenance release.
    There is a procedure to change a deployment type from compact to single managed server that I created as an internal document.
    you may want to give it a go but you would need to test this first as this was an in house test that I carried out.
    Hyperion Planning - Version 11.1.2.2.300 and later
    Information in this document applies to any platform.
    Goal
    The scenario:
    EPM system 11.1.2.3 was configured and deployed as a single managed server compact deployment so that only one JVM was used for all products EPMServer0.
    Later on, due to performance issues, the decision was made to go for using a JVM for each product and get rid of the compact deployment.
    The administrator went ahead and redeployed the application servers individually into their own JVM.
    However everytime the webserver is reconfigured, the weblogicCluster entry in the OHS file mod_wl_ohs has 2 servers, one for EPMSserver running on port 9000 and another server running on the product default port (as if it was being load balanced)
    The aim:
    It is clear that initial compact deployment has not been cleared from the EPM environment and the aim in this exercise is to clear the registry and the file system so that the compact deployment is removed fromthe EPMenvironment and we are left with the desired configuration Single JVM deployment for earch web application.
    Solution
    Caution:
    Make sure that you take a backup of the following:
    - TheFoundation Services database schema backup
    - Take a backup of the following folders:
    \Oracle\Middleware\user_projects\FOUNDATION1\httpConfig\ohs\config\OHS\ohs_component
    \Oracle\Middleware\user_projects\domains\EPMSystem\servers
    \Oracle\Middleware\user_projects\domains\EPMSystem\config\fmwconfig\servers
    Disclaimer:
    This was tested in House and it worked for this specific environment and it may not work for your environment. So the suggestion is to test first in a development environment and make sure that you take the appropriate backups in case it does not go according to plan.
    Use at your own discretion.
    Procedure:
    1- Run the epmsys_registry to generate the Registry report
    2- Search through the report for the word applicationServerDeployment with a corresponding value of configured and take the ObjectID number down for any entry of applicationServerDeployment that has a value of Configured
    i.e:
    Instance Tasks Configuration (INSTANCE_TASKS_CONFIGURATION)
    Object ID:   e4b3a86a82c26941S32ef81a1455fe48473S7adf
    3- use the object ID of each entry you have taken down throughout the Registry HTML Report to manually set it back to Pending using the following procedure:
                    Start a command prompt and set the working directory to
                     \Oracle\Middleware\user_projects\epmsystem1\bin
                    run the command:
                     epmsys_registry.bat updateproperty #e4b3a86a82c26941S32ef81a1455fe48473S7adf/@applicationServerDeployment=Pending
                    Repeat this command for each ObjectID that has its applicationServerDeployment
                     property set to Configured
    4- rerun the epmsys_registry.bat to generate the Registry HTML report and search for applicationServerDeployment in the newly generated report to make sure that they are all set to Pending and there none missed (very Important).
    5- Search the registry HTML report this time for EPMServer0 which is the default serverName given to the single managed server deployment (there will be multiple entries)
    Take note of the first ObjectID entry in the section header: for example
    WORKSPACE_WEBAPP (WORKSPACE_WEBAPP)
    Object ID:   e4b3a86a82c26941S32ef81a1455fe48473S7bd3
    - Start a command prompt and set the working directory to
                     \Oracle\Middleware\user_projects\epmsystem1\bin
    - run the command:
                     epmsys_registry.bat view #e4b3a86a82c26941S32ef81a1455fe48473S7bd3
    -Note the Parents ID in the output:
    For example:
    Parent 1
    NAME -  WORKSPACE_LWA
    ID -  e4b3a86a82c26941S32ef81a1455fe48473S7bd0
    TYPE -  LOGICAL_WEB_APP
    Parent 2
    NAME -  HOST:BACHVMPS3TR
    ID -  e4b3a86a82c26941S32ef81a1455fe48473S7ffe
    TYPE -  HOST
    - Note the single child ID:
    For Example:
    Child 1
    NAME -  WebLogic 10
    ID -  e4b3a86a82c26941S32ef81a1455fe48473S7fd6
    TYPE -  APP_SERVER
    Now run the following command to remove the Link between Parent and child:
    epmsys_registry removelink #parentObjectID #childObjectID
    In this example that would translate to:
    To remove the single child1 link to the WORKSPACE_WEBAPP (#e4b3a86a82c26941S32ef81a1455fe48473S7bd3 ):
    epmsys_registry removelink #e4b3a86a82c26941S32ef81a1455fe48473S7bd3 #e4b3a86a82c26941S32ef81a1455fe48473S7fd6
    And do the following To remove the link between WORKSPACE_WEBAPP (#e4b3a86a82c26941S32ef81a1455fe48473S7bd3 ) and Parent1 and Parent2:
    epmsys_registry removelink #e4b3a86a82c26941S32ef81a1455fe48473S7bd0
    #e4b3a86a82c26941S32ef81a1455fe48473S7bd3
    epmsys_registry removelink #e4b3a86a82c26941S32ef81a1455fe48473S7ffe
    #e4b3a86a82c26941S32ef81a1455fe48473S7bd3
    - Now that the link has been removed, delete the WORKSPACE_WEBAPP component using its ObjectID :
    epmsys_registry deletecomponent #parentObjectID
    In this example:
    epmsys_registry deletecomponent #e4b3a86a82c26941S32ef81a1455fe48473S7bd3
    - Delete also the Parent representing the WORKSPACE_LWA
    epmsys_registry deletecomponent #e4b3a86a82c26941S32ef81a1455fe48473S7bd0
    Note:So we have now deleted the WEBAPP and LWA for workspace.
    6- Repeat steps in section No 5 for every WEBAPP with EPMServer0
    7- Start the Weblogic admin console and login
    Then go to the left panel and Expand Environment -> Server
    Click on Lock & Edit -> Select EPMServer0 -> click on Delete and confirm
    Activate Changes and Log off
    8- Stop the weblogic admin console server
    9- Go to the following location and delete the folder EPMServer0:
    \Oracle\Middleware\user_projects\domains\EPMSystem\servers
    Delete also EPMServer0 from the following location:
    \Oracle\Middleware\user_projects\domains\EPMSystem\config\fmwconfig\servers
    10- Start a command prompt and delete the Windows service that was created for EPMServer0 (if using Microsoft Windows Operating System):
    Right click on the service 'OracleHyperion EPM Server - Java Web Application (epmssystem1)' and get its service name i.e: HyS9EPMServer_FOUNDATION1
    Run the following command: sc delete HyS9EPMServer_FOUNDATION1
    11- Launch the EPMSystem configurator and redeploy the web application server to their own JVM
    12- Go to the following location \Oracle\Middleware\user_projects\FOUNDATION1\httpConfig\ohs\config\OHS\ohs_component and rename the file mod_wl_ohs.conf to mod_wl_ohs.conf.old.
    13- Copy the unconfigured mod_wl_ohs.conf file from the location C:\Oracle\Middleware\ohs\ohs\conf to the location \Oracle\Middleware\user_projects\FOUNDATION1\httpConfig\ohs\config\OHS\ohs_component
    14- Run the EPM System Configurator again and configure the WebServer to reconfigure the OHS configuration file mod_wl_ohs.conf.
    Once done then open the mod_wl_ohs.conf file and make sure that there are no servers configured with Port 9000.
    15- Start the services and test the workspace

  • Desktop Manager Updated to ver. 5.0 - why is Device Manager tray icon "exit" greyed out?

    Just updated to Desktop Manager 5.0
    Blackberry Device Manager 4.7.1.11
    BBDevMgr 4.1.0.11
    Rim USB Driver 4.1.0.4
    Rim USB Serial Driver 2.2.0.3
    Before with previous version Device Manager tray icon would go away after disconnecting BB.
    Now Device Manager tray icon does not go away after disconnecting BB and when right-clicking on it "exit" is greyed out - what's up with that? Is this by design? Why can't I get rid of the tray icon when disconnected?
    JSD

    Here's something bizarre. I have also been syncing contacts, calendars and tasks for a long time with my Storm. After downloading the Desktop 7.0 I also saw the Calendar as not available. I don't particularly remember seeing Memo as an option but I also selected it this time around as I was going through the old reload the os, restore, etc. Anyway I did a test adding an appointment to my Outlook calendar then ran the sync for contacts, tasks and memos and amazingly it shows on my Storm's calendar. Not sure how comfortable I am in depending on this but you might try and place an appointment on Outlook's calendar, run the sync and see if it shows up on your cell's calendar. Strange but it is working for me.

  • How to unlock a locked folder on external drive when locked checkbox greyed out

    I use an external hard drive for Time Machine backups and to store some larger video files in a folder called Videos.  The Videos folder on the external drive is now locked and I can't unlock it.  I go to Get Info, hit the lock icon and enter my password, but the "Locked" checkbox is greyed out in the General section.  In the Sharing and Permissions section, instead of displaying my name, it says "Fetching . . ." and I can't change the Privilege from "Write Only". 
    Anybody know what's causing this or how to fix it? 
    Thanks. 

    Launch Terminal and copy/paste this command at the prompt…
    chflags nouchg
    Then drag the files you are having a problem with into Terminal. It will create the path, then press Return.

  • Audio MIDI Setup Issue -- "Thru" checkbox greyed out

    I received my new PowerBook (DL Superdrive) last week and transferred my files from my old PB (the final 1GHz Titanium model) over the weekend. On my TiBook, I used to plug an analogue radio into the Line In port and Apple Pro speakers (via an iFire) into the Headphones port. I then ticked the "Thru" checkbox alongside the M(aster) Volume Slider in the Audio Input section of Audio MIDI Setup (even in Tiger, once I worked out where the checkbox was -- see <http://discussions.apple.com/message.jspa?messageID=740942>) to listen to the radio through the external speakers and control output volume using the keyboard's volume & mute keys.
    Audio MIDI Setup on the new Powerbook has some differences, however, including:
    1. In the Audio Input section, the M(aster) Volume Slider IS NOT greyed out, but the "Thru" checkbox on this line IS greyed out., and the 1 & 2 Volume Sliders ARE also greyed out.
    2. Clock Source is "Internal Clock" rather than [greyed out] "Default".
    The first of these differences has left me unable to set up my audio as I used to. Instead, I've had to run a non-Apple audio application, LineIn, in order to achieve the same result. The trouble with this is that I've also experienced the audio stuttering loop described in <http://docs.info.apple.com/article.html?artnum=302978>, possibly as a result of this app running.
    Two questions: First, does anyone have any idea how to get Audio MIDI Setup running on the new Powerbook as it did (does) on the TiBook, so that I can dispense with LineIn?
    Second, do any of the other Powerbook owners with the audio stuttering problem have similar issues with Audio MIDI Setup -- is it a common factor/symptom/cause?
    PB G4 15" 1.67GHz DL SuperDrive   Mac OS X (10.4.4)  

    The audio stuttering issue was resolved by an OS X update shortly after I posted this message, but I never did resolve the other issue, and continue to use LineIn to this day (now on a MacBook Pro C2D.

  • Plugging in my iPod Nano no longer starts iTunes. Why is the "Start iTunes when this device is plugged in" checkbox greyed out?

    Can anyone help me with this?

    Looks like that, or a combination of the two took care of the problem. Yaaaaayyyyyy!
    Thanks again for your help. It got a little dicey because without the manage my own files box checked iTunes tried to sync the iPod to iTunes and there wasn't enough room on the iPod for all of the music. Once I got the prevent sync bow unchecked in Preferences and unchecked the manage my files and use disc boxes unchecked I was able to check the start iTunes box and the manage my files box an apply it so that I have the best of both worlds going own.
    Life is good!
    Thaks again Brother.

  • Categories is greyed out so I cannot manage them, I am a new customer

    I am having very little luck with support from the SAP Portal to pose this question, I am a new customer and in the set up phase of Crystal Reports Server 2008.   As a supposed super admin I am unable to send a ticket because they can't get my authorities correct.   SO HERE'S  MY ISSUE RIGHT NOW 
    I CANNOT ACTIVATE THE CATEGORIES IN THE CMC.   I HAVE FOLLOWED ALL THE BASIC INSTRUCTIONS AND WHEN I GO TO THE FOLDERS AND MANAGE THE CATEGORIES IS GREYED OUT SO I CANNOT SELECT ON IT.

    How exactly are you trying to accomplish that ?
    You cannot set what user will see when he logs in Infoview from CMC.
    You can login in Infoview as administrator, then set your Preferences to show categories and save it.
    Then you'll need to run a script that copies Admin preferences to selected groups or users.
    There are couple of threads here on this subject, I do not recall what that script is...
    Have you looked at the Admin guide ? it has most of this info as well.

  • Checkbox needs to be greyed out in ALV List display

    Hi Experts,
    I am using u2018 REUSE_ALV_HIERSEQ_LIST_DISPLAY' and I need to make the  checkboxes greyed out based on certain conditions. For eg --Say if the field 'status' is 51 in my internal table then the checkbox should be editable  in the List display otherwise the checkbox should be greyed out .. Can this be achieved? Or should I use Classes to do it. Please adviceu2026

    Hi Shankar,
    This is possible using CELLSTYLES (lvc_t_styl), which can fulfill the behaviour you require for your scenario.  I would suggest you to go through the below mentioned link posted on SCN which to asked for the same set of requirement.
    Disabling certain rows in editable oo alv ?
    Please validate the same at your end and let know on this.
    BR/Thanks
    Pranav Agrawal

  • Why is the "Manage" tab on the top greyed out since I updated to ver 2.3 ?

    Hi!
    Since I updated to Muse version 2.3 the "Manage" option on the top, next to publish, is not working, even though my Business Catalyst is properly set up and payments processed etc. Inspite of publishing the site several times, the "Manage" option is still greyed out! Help will be really appreciated.
    Thanks a lot !
    A troubled Muse user,
    ~Arti Agarwal

    Hello Arti,
    Deleting the AdobeMuse folder should not affect the data.
    Please tell me are you working on Mac or Windows?
    In case it is mac, you can use Go>Go to folder and type in there ~//Library/Preferences/ and reach the Preferences folder to find AdobeMuse folder there.
    As a work around, you can also use the link below to visit your website admin console :
    http://www.enlight-art.com/admin/Index.aspx
    Regards,
    Sachin

  • Master Boot Record is greyed out, so how to use?

    How do I use Master Boot Record (in Mountain Lion, to partition an external Seagate Backup+ hard drive) when it is greyed out and I can't choose it? I tried turning off Time Machine, but that didn't do anything. I also tried installing various Seagate software (like HFS4Win.exe) because what I really want to do is use one partition on the drive as back up when I'm using the Mac OS, and the second partition as back up when I'm in Windows 7 (with maybe a third partition for storage for either/both - it's 3tb). I've spent a few days at the Seagate page and nothing suggested there works, but re-formatting the drive with Master Boot Recorded sounds promising, and it won't let me!
    If anyone has a solution please let me know! I'm reasonably adept!
    Songsterr

    Hi Lee,
    If "Manage Catalog" option is greyed-out, it may be possible that you are in the "eLive" room. As in "eLive", most of the File option are displayed.
    Switch to "Media" room, the option "Manage Catalog" will be enabled.
    Then, please follow the steps mentioned in the article to convert the catalog Elements Organizer Help | Creating and editing catalogs.
    Please let me know if you need any other assistance.
    Thanks,
    Swapnil

  • FREE SAP Solution Manager Simulations, eBooks and Presentations

    Learning on Demand by SAP ([LoD|https://lod.sdn.sap.com/]) has recently been updated with approximately 100 FREE Simulations and eBooks, some of which relate to SAP Solution Manager. SAP Simulations and eBooks are a convenient way of obtaining SAP training on new topics or updating your existing knowledge on new product releases.
    Examples of the free Solution Manager elearning resources available on LoD include:
    - SAP Solution Manager Use Cases
    - Global Roll-out
    - Sizing SAP Solution Manager
    Click [FREE SAP elearning content|https://cart.lod.sdn.sap.com/pages/FreeContent/lod_free_courses.htm] to review the new elearning content and start Learning Now!

    Hi Shane,
                      Thanx for sharing the information.
    Regards
    Spree

  • My iCloud option is greyed out in general settings

    My iCloud feature is greyed out along with Facebook and twitter....also the manage memory is also greyed out...
    Ay suggestions?

    Welcome to the Apple Support Communities
    Open Settings > General > Restrictions and turn it off

  • Greying out Pushbuttons in MM01

    Hi Folks,
    Please let me know how can I grey out the pushbuttons in standard SAP  transactions.like I wan to grey out the ADDITIONALS (pushbutton ) of Basic data view 2 in MM01.
    when i checked SDN lot of posts reg greying out fields but not for pushbuttons.
    Please throw some light on this.
    Thanks,
    Shwetha

    Hi,
    Use BADI "BADI_MAT_F_SPEC_SEL" to change the field properties of transaction MM01 and MM02.
    Put your logic in Method "FIELD_SELECTION".
    This method is called for each field and Structure FAUSWTAB contains field attributes of each field which you need to modify as per your requirement.
    For greying out Pushbutton "Additionals" in Basic Data screen write below mentioned code in Method FIELD_SELECTION.
    if fauswtab-fname = 'MARA_WTADDI'.
        fauswtab-kzinp = '0'.
    endif.
    Regards,
    Vijay

Maybe you are looking for

  • Can anyone explain me this??

    I use Jrun4 app server. I am creating a row in the database using entity beans. The child table record is created using DAO. Both the operations are happening in the same transaction. When i start the server n do the above operation i get parent key

  • IPhone 5 brightness permanently reduced (Please help, voltage issue??)

    Hello, I really need someone with high expertise to help me. Obviously i appreciate any help given but please dont say point less comment like reboot the phone or turn autobrightness off. Here is the issue: I have had several iPhones, right from the

  • AppleTV Suggestions Topic

    I've had AppleTV for about a month now and I love it. There are little niggles that I'd love to see addressed - Maybe if enough folks participate in this thread, somebody will pay attention. Here are some of my suggestions: SCREEN SAVER I: When the s

  • Packing Material Functionality

    Dear All, Description of Scenario: I have BOM for FG(Finished Goods) with RM(Raw material) and PM(Packing Material), where Packing Material Being BOX. In BOX we can pack 15 nos of FG, thus in BOM the quantity of BOX would be (1/15 = 0.067) to manufac

  • How can I reinstall a previous version of muse?

    How can I reinstall a previous version of muse? I tried under Apps in Creative Cloud - previous versions- but there are no previous versions of muse showing up. What can I do? Ever since muse upgraded yesterday it crashes every time I try to publish,