SAP AutoID Infrastructure vs Sybase SUP Mobile based solutions for RFID???

Hello All,
I'm trying to come up to speed on the basics as we have projects going that have RFID, Barcode and mobile design implications. As mobile has evolved we're looking at some opportunities give the number of consumer level devices available. We know we won't be able to simply replace all existing (ruggedized, etc) devices but the oppertunity is there to do some new things, or old things with new devices. At the same time we have our existing RFID infrastructure (Not SAP AII). My question is... is there any overlap between an SAP AII infrastructure and Mobile Infrastructure? For example from what I gather an AII infrastructure typically has an RFID middleware for data management device monitoring, etc that is integrated with SAP AII. Sounds very similar to mobile architecture with a middleware piece taking care of decide management data integration & management etc. Kind of troubling to me that 2 pieces of heavy infrastructure are needed for these two scenarios. Oh and lets talk XMII also which we also have installed.
So just comming up the curve on all this. Is there any overlap here where RFID architecture could be handled by a good mobile design? I suspect any overlap is conceptual and the rub will be the device support.
Thanks,
Doug

Hi
I have been following SAP Mobility as well. These are my gathering.
SAP Sybase SUP - This is being recommended for heavy weight applications. There are additional components on the SUP layer as, Sybase Control Center and Afaria for monitoring and device management.
Project Gateway - This is being recommended for light weight application. It does not require any additional infrastructure, only software components to be added. I have not heard of any release date for this product. Conceptually it seems very good and based on the demo that was presented in Tech Ed 2011, the development was very simple as well.
ITS Mobile - This is integrated ITS in ECC. SAP console has been replaced with product. This is used mainly for the RF transactions in Warehouse Mgt. No additional infrastructure, some minimum configuration and ABAP development.
BI Mobile - This requires an additional infrastructure and software components to be added where by BI can interface with the mobile devices.
SAP Sybase have also built solutions for Workflow using the SUP platform.

Similar Messages

What Mobile Sales solution for ERP 6.0 ?

Hi colleagues,
I have serious difficulty to understand what is the SAP offering for Mobile Sales solutions for SPA ERP 6.0. SAP is vague and just say there IS solution for R/3 (?).
My questions are in two directions:
1. About the "preconfigured" Mobile Sales offerings or xApps or whatever it is:
    - can we use SAP MSR 2.0 with ERP 6? If yes- are still the limitations described in Note OSS 735727 valid (use only with Microsoft PocketPC2003, PocketPC2003 SE and Win32 )
    - can we use xMSA HH with ERP? If not - what this document refers for? : ( https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f635d890-0201-0010-d8b2-8380c23456ed )
2. About the "Online" solutions
   - Could the ERP Internet Sales be used with Handheld?
   - and if yes what are the pros and cons against using custom WebDynpro or ITS?
Thank you in advance for your help,
Jordan

Dear Jordan,
If I am not wrong you are talking about internet sales for R/3 when you say ERP internet sales, which is probably outdated by now. Nowadays SAP distributes something called as mySAP Business Suite which in brief is as follows:
mySAP Business Suite :
CRM - Customer Relationship Management
ERP - Enterprise Resource Planning
SCM - Supply Chain Management
SRM - Supplier Relationship Management
PLM - Product Lifecycle Management
SAP Netweaver
Solution Manager
The current Mobile Sales solutions need mySAP CRM. Some of your questions about the xApp Mobile Sales for Hand Held are already answered in this wiki:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/home/xmsaHandheldClient
Also you can get the installation guide, release notes from here in SMP:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000668453&
About MSA HH 5.0 Device requirement- Yes you need to use Windows Mobile PDAs with Pocket PC 2003/ Windows Mobile5.0, Windows Mobile 6.0 OS.
There is another application, Mobile Sales Online, which can work with Blackberry Devices, technical information regarding which can be got from SMP here:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000614083&
The info is a bit vague but once you are through with them, you will have the clarity you need. Please mark this thread as answered and my post as solved if my post answers your queries.
Regards,
Veera
Edit: You may also get in touch with your local SAP contact to get the contact info of the product team/manager of both the products above for the best clarity possible.
Edited by: Veeraraagavan R on Mar 24, 2009 5:58 PM

Query on InfoPath based solution for SharePoint 2013 O365

We are working on a Lotus Notes to SharePoint 2013 – O365 migration project. In that we have bunch of applications with list forms that requires UI customization using InfoPath to show the large number of columns in a tabular format / various sections /
simple rule validations / cascaded lookups.
Since the InfoPath form based solution are not supported on the next version of O365, we would like to know what is the Microsoft preferred alternative practice for such cases.
Vijayaragavan, MCTS

you can use access
read the following articles to give you an idea
http://zimmergren.net/business/the-future-of-forms-with-sharepoint-and-office-365
http://blogs.office.com/2014/01/31/update-on-infopath-and-sharepoint-forms/
http://technet.microsoft.com/en-us/library/sharepoint-online-service-description.aspx
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation

Mobile printing solutions for iPad

Hello I would like to see if anyone can help with this...We are trying to equip our service employees with printing capabilities while they are out in the field. I know that it seems that the best way to go is with utilizing the air print feature of the iPad, however looking at the supported printers (found on the apple website) i dont see any that seem all that "portable" in regards to size and weight. How are others handling their printing needs on the go?
Thank you very much!!
Clark

looking to do the same thing.
Thanks to all who contributed to this thread/
HP offers something called mobile printing solutions.
apparently at Kinkos and other selected locations, a person can send thier docs to be printed rom thie i pad.
i downloaded the HP mobile printing app, but the local Kinkos is some distance away, so i have not yet tried it.
Bersides, there would be a cost per page. for printing.
sending e mail attachments to companies with printing capabilities i have tried.
Staples offers this serivce, but I sent some docs and they had to be adjusted and modified by the Staples printing department to enable correct printing on a page, so that particular abenue may be out.
( i made the document using Noteworthy app and sent it to Dropbox and sent the resulting PDF from dropbox to Staples, who printed the test, but told me it requireed page modification..
I have no idea why as the page i had worked up into a PDF had a standard word processing format.
Thanks for all who contribute their time and experience in these forums
neophyte

Custom based solution for Lync Server 2010

I am working with a customer which is a school and we are implementing Lync Server 2010 as UC solution. There are few considerations for this solution. The requirements are -
1. The girls should always chat to girls not boys and vice-versa
2. The students from same class should chat and not with other classes.
So, wondering if we have any solution for the same. We dont have time and developer to work on Lync Server SDK and give us the solution.
Thanks and Regards/Harpreet S

Hi,
Yes, please try ethical wall as Saleesh said.
http://windowspbx.blogspot.com/2012/07/controlling-who-has-what-access-to-who.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support

Mobile Leave solution- EHP6/HR Renewal?

Hi Experts,
I have a requirement from the client on which I need to get the clarity. The background is that we have a ECC6 system with EHP6 implemented and a Enterprise Portal version 7.1 where the client is using its ESS/MSS services based on WDJAVA applications and on Home Page Framework. Please note that HR Renewal is not yet implemented but it is currently under considerations.
Now the requirement is that client want to have Mobile Leave solution for Leave Request & Approval functionality. We already have got some idea on Fiori but we want to understand if there is any other functionality available apart from Fiori in HR Renewal- EHP6 which we can leverage from SAP for our client to fulfill the demand for Mobile Leave solution?
Awaiting your response.
Many Thanks!
Regards
Sahil Kohli
Tags edited by: Michael Appleby

Hi Sahil,
Technically, any SAPUI5 application should work in any platform. That mean, the applications will work on mobile browsers.
As far as i know, UI5 applications in HR renewal have surely been built with a some consideration of mobile devices. However, i would not jump the gun and tell you that it will work seamlessly on all mobile devices. On large screen devices like ipad->OK. But on small screen devices like iphone->not OK, it will be like viewing a website in desktop mode in the tiny mobile browser. The app would not automatically re-arrange itself to suit the small screen of an iphone. However, fiori apps are different. The sap.m UI library helps fiori apps to resize the UI and re-arrange the layout based upon the screen size. Also the fiori apps are optimized for touchscreen devices, which i do not think would be the case with the UI5 applications in HR Renewal.
Fiori definitely scores higher if your requirement is to ensure the leave request and approvals work seamlessly on all platforms especially mobile. Saying that you should decide not only based on the platform you need but also on the functionality you plan to have in the apps. Since you say that your client is running on WD java of leave request, it might be necessary to gauge the change in the functionality between WD Java and HR renewal UI5 or Fiori. For example, 'My Leave Request' fiori app does not show the team calendar when you create a new leave request. Similarly you might need to check the functionality available in both new apps before deciding.
Hope this info helps.
Best Regards,
Varun

TmHttpclientPool-664 [com.sybase.sup.server.http.TmApplicationHandler] [] [] On connection expired .....

Hello,
We have SAP CRM REX 3.1.9 installed for our client with iPad as frontend. Im getting following error in the SUP prod environment.
this error did not occur in QA or Dev system anytime during our testing.
2014-04-01 15:26:12.687 INFO    MMS          TmHttpclientPool-664 [com.sybase.sup.server.http.TmApplicationHandler] [] [] On connection expired .....
2014-04-01 15:27:08.419 INFO    MMS          TmHttpclientPool-664 [com.sybase.sup.server.http.TmApplicationHandler] [] [] On connection expired .....
2014-04-01 15:28:05.939 INFO    MMS          TmHttpclientPool-664 [com.sybase.sup.server.http.TmApplicationHandler] [] [] On connection expired .....
2014-04-01 15:30:39.481 INFO    MMS          TmHttpclientPool-664 [com.sybase.sup.server.http.TmApplicationHandler] [] [] On connection expired .....
2014-04-01 15:31:16.950 INFO    MMS          TmHttpclientPool-664 [com.sybase.sup.server.http.TmApplicationHandler] [] [] On connection expired .....
Sync doesn't work at first time for most of the Users but repeated sync requests finally end up having a successful sync at some point of time.
System landscape is
- 2 SUP server
- 1 DB server
- devices are connecting through reverse proxy to SUP server from outside
- Users connect using 3G/4G network or Wifi, I know there is known issue with 3G/4G network connecting to SUP, but Users face same issue while on WIFI also.
Share your thought if someone has faced/fixed similar issue.
Regards
Sameer

Hi Michael and all,
I am also facing the same issue as you, I have installed SUP 2.01 and using Sybase Mobile Sales 1.2.
I have deployed Mobile Sales application on my windows Mobile simulator also connect to the device created in Sybase control center.
When i try to connect Mobile Sales application to the server, initially it shows downloading Activity,leads, Opportunity etc in the status bar, but after some time, it kept saying Checking for Initial Data, and runs never ending. And we are not facing any connectivity issues.
In DOE Session Monitoring we can see status of all the data Objects without errors.
When we checked in the DOE logs, we are getting below 2 warning.
Unable to determine dialect of the StAX implementation at jar:file:/C:/Sybase/UnwiredPlatform/Servers/UnwiredServer/lib/ext/sup-ds.jar!/
Anonymous transaction context. Any attempt to acquire a transactional resource in this context might result in a resource
Micheal, did it work for you further, can you suggest anything on this issue.
Your help will be appreciated.
Thanks and Regards,
Peter Dinesh.

SAP Exchange Infrastructure

Can any one tell me about SAP Exchange Infrastructure, what is it, where it is reqd., what r the requirements to install it, or any source of material to read
abhishek

Hi Abhishek,
As u got .....the basic information. check these links for further info.
JDBC Receiver: exact SQL statement
/message/527697#527697 [original link is broken]
And after you are done with the documentation probably you can go through this scenario,
JDBC Receiver: exact SQL statement
Also check the following threads which might help you a little more,
Learning XI
XI 3.0 Training
Also for more info related to XI go through these links:
XI -Starter
http://help.sap.com/saphelp_nw04/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
SAP XI - Where to Find Information
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/sap%20xi%20-%20where%20to%20find%20information.pdf
All the information you need in XI :
http://help.sap.com/saphelp_nw04/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
To understand the architecture of XI, Please go through this link:
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
You can also go through the url for Elearning :
https://www.sdn.sap.com/sdn/elearning.sdn // https://www.sdn.sap.com/irj/sdn/sdnpilot/elearning
Following is the link for 'how to guides', A step by step guide to create scenarios:
https://websmp201.sap-ag.de/nw-howtoguides
XI is all about configuration of Adapters, to learn more please go through this link:
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
One of the most powerful feature of XI, Business Process Management:
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm
Following are the links to weblogs which will help to develop the basic scenarios.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP
1) How-to Guides for SAP NetWeaver 2004 for SAP XI:
Exchange Infrastructure How-to Guides for SAP NetWeaver 2004 [original link is broken]
Regards,
Priyanka.

Mobile iPhone Application for SAP B1 Documentation

SAP releases the following statement on their landing page for their customers about using iPhone App in version 8.8. Direct copy and paste:
I am already using SAP Business One. Are there any requirements to be able to use this app?
You need to be running SAP Business One version 8.8 with a professional user license. Before you start using the app, make sure your SAP partner configures the mobility settings in SAP Business One.
Where is the documentation that is the checklist for installing and getting the mobile app up and running? You know, the usual documentation from step A to Z - go to Add-ons and do this, go to User and do this, etc. All I can find are videos/documents that are marketing oriented. I have the user guide "Setting Up Mobile Scenario in 8.8", but it is woefully lacking in several steps (ie, it says some fields are mandatory, but SAP does not even mention what "code" column is supposed to mean).
Anyone else have any luck digging out the pertinent information from SAP sites which SAP should have prominently highlighted to its partners before rolling this out? Where can I find it?
This all seems to be a rather disconnected roll-out.
Thanks in Advance - Zal

Here is part of the answer - Go here: https://websmp203.sap-ag.de/sbo-swcenter
Until it is changed, select "Updates" (not the other areas stated in some documentation, videos, and threads) and select "SAP Business 8.8", then "B1 8.8 Integration Component", and then it can be downloaded.
I will add more info as the process goes along, if there is anything more...
TIA - Zal

Mobile Work-Station for SAP Business One

Hello Everyone
As I am aware that most of you have seen already various mobile solutions that integrate to SAP B1, Amodat Mobile Work-Station is currently the only solution that offers a complete mobile work-station for the four main field functions of SAP Business one: sales/van-sales, service, CRM and warehouse management on PDAs and laptops in on-line/off-line environment.
We refer to those solutions as workstations, since they provide a COMPLETE working functionality for corporate users in the field with features such as full order, collection and distribution management (including invoicing and supporting multiple price lists), on the go inventory management, service calls dispatch optimization tools, document attachments to accounts and activities, GPS location and much more.
Although we have numerous R/3 customers, our main focused is the SME market where we can offer robust solutions for a very reasonable price. Since 2001 we have implemented through our partners hundreds of projects ranging from 5 to over 500 users across Europe, North America and Australia.
I will be happy to provide more information on the solutions and set up live demo if anybody is interested.

Hi Jai,
I'll be happy to schedule a demo with you and your customer. I am not sure what is your time zone though and how to communicate directly with you. since we can not send email you could reach me through Linkedin Nir (Matan) Aharon. please add me to your contact list and let me know your email.
Best Regards,
Nir

How about the RFID device and SAP AutoId connections?

Hi All,
Scenario1 (Ports are enabled from client system): Client m/c is in different location and SAP AutoId Server is in different location. I have to connect the RFID reader and device controller to Client m/c to send the PML message to Server system. Is it possible?
(Or) Do we need to connect the RFID Hardwares directly to the SAP Auto Id server?
Scenario2 : I have to connect the server system through VPN, in this case If I connect the RFID hardwares to client system. Is it fine?
Regards
Sara

Hi Stellare,
I fully agree with Daniela Bork. You've installed 5.2 and you need some preliminary data load like rules, messages etc. as per the installation & config guide. By doing so you're loading standard risks(Global) will be created in the system. This value if you want to check at table level this should be at your DB attached to the Java stack.
ABAP stack tables are /virsa.... and virsa_cc are java stack tables. It depends on which version of GRC you're using.
Regards,
Asok

SAP AutoId scenario

Hi All,
Could you please tell me how many days it will take to do RFID scenario, if the landscape are ready...
Landscape : RFID, SAP AutoID, XI and R/3 System.
Scenario : RFID -> SAP AutoId -> XI -> R/3 System.
Do we need to do any coding in AutoId?
Regards
Sara

Hi Sara,
The steps to perform the below mentioned scenario, there is a document availalbe for that on SAP Service Market Place. You need a S-User ID for that.
Go to
service.sap.com/rfid --> Detailed Information --> SAP Auto ID 4.0 --> Outbond Processing Business Scenario.pdf
Delivery Processing.pdf.
All these above documents will give you each and every step.
And i am not aware of the SAP XI adapter.
For RFID integration standard XI Content is availalble for SAP XI that will let you integrate SAP R./3 and SAP Auto ID

Possible scenarios with XI, SAP AutoId, RFID combination.

Hi All,
Could you please provide the answers to the below questions
1. What all possible scenarios we can do with SAP AutoId using RFID datas?
2. I would like to do scenarios with and without SAP Netweaver XI for the above case. Please provide some scenario examples.
Regards
Sara

Hi Sara,
The possible scenarios of SAP Auto ID are many. You can have a detailed documentation on th esupported processes by SAP Auto ID on the following link:
http://help.sap.com/saphelp_autoid70/helpdata/en/5f/064f36300247b686bf0233454dbeb1/frameset.htm
Without using XI, you will not be able to integrated with SAP ERP.
So only process thats possible wihtout XI in SAP Auto ID is Slap and Ship Process. The same process has also been explained in the above link.
I hope this helps. Please revert if you any other doubts.

ASAP Implementation Roadmap for SAP Exchange Infrastructure

Does anyone know if the "ASAP Implementation Roadmap for SAP Exchange Infrastructure" is still available somewhere?
I'm looking for templates for documenting XI flows.
thanks!

hi,
try this link:
https://websmp109.sap-ag.de/~sapidb/011000358700004919702004E
Regards,
Michal Krawczyk
http://mypigenie.com - XI/PI FAQ

SAP Exchange Infrastructure 2.0 means WAS existe?

Hi,
I juste intalled IDES instance, one of the version coponenent installed is SAP Exchange Infrastructure 2.0.
that is it mean WAS astalled to?
How to setup WAS to get XI access,
Thanks,
FF

Hi,
SAP NetWeaver Exchange Infrastructure(XI) runs on the SAP NetWeaver Application Server (previously call SAP Web AS).
The SAP NetWeaver XI 2.0 release runs on the SAP NetWeaver AS 6.20 release.
The SAP NetWeaver XI 3.0 release runs on the SAP NetWeaver AS 6.40 release.
The SAP NetWeaver AS is automatically installed when you install SAP NetWeaver XI - no special actions are required for installation. Just follow the post installation steps in the installation guide and you should be ok.
cheers,
mike.

SAP AutoID Infrastructure vs Sybase SUP Mobile based solutions for RFID???

Similar Messages

Maybe you are looking for