SAP B 1 8.8.1 PL5 Hardware key issue
Hi All,
As I recently installed SAP B1 8.8.1 PL5 successfully,
We open 'service manager' -> License Manager -> Settings -> Entered Server name
Issues are :
1.No Harware key was displayed below.
2.While clicking on 'Set' button, some message was thrown like : port number is set, you need to install this also on server...
After that we uninstalled the server tools and again tried to install it but system is not allowing to install ST now.
What to do now............What can be the reasons
Please reply if anyone knows the solution.
Thanks and Regards,
Surabhi
Hi Surabhi,
What is the OS you installed. Is it PL0 or PL5 as your subject?
You may check this: cann't see hardware key
Thanks,
Gordon
Similar Messages
-
Hi,
Environment: OS:HP-UNIX , ECC6., Oracle DB
i have applied sap license in 000 with sap* user id successfully. And everything is working fine except one thing.
That is when i go to transaction USMM the hardware key is wrong it shows A0000000. And hardware key is correct in slicense and at service market place.
Please let me know what i can do.
I have also applied license from OS level and still issue is persisting. SAP restart is also not resolving the issue.
Gracias in advance..
Sammy..Thx Juan...for the solution..that too in such a short time...
tread is marked as answered...
sap_shobhit...thanks for the reply...appreciate ur help... -
Hi ,
i have install IDES server ( Licesce installed ). Now my server is courrpted
can i use the same licence key for the same hardware . wheni will install the server again .or do i have get it registered again with SAP
its urgentHi Sachin,
yes...if you are installing on the same hardware under same SAP System name (SID) and same software component, you can use the same License key.
Cheers !!
Satya.
PS: points always encourage me to reply ... -
Hardware key is not displayed in SAP B1 8.81
Hi,
We installed SAP B1 8.81(Evaluation version). Hardware key is exists in Service manager -> Licence Manger.
But it is not displaying in Client System 's Help -> About SAP Business one.
Please let me know how to retrieve hardware key.
Thanks in advanceHi,
Thanks for reply.
For security purpose we are using Hardware Key of Client's Help --> About SAP business one form --> Hardware key.
Hardware is null in this form in SAP B1 8.81.
Kindly help us to resolve the issue
Thanks in advance
Parthiban -
Duplicate Hardware Key when tried to request for new license key
Dear Experts,
Our SAP ECC6 license key is going expire in these few days. Therefore, I tried to request for new license key with the same Hardware key at SAP Support Portal, but it showed "Duplicate Hardware Key".
Should I wait for the current one to expire before I could request for new one?
Regards,
AbrahamHi Nick,
It's not a temporary license.
It just when I tried to get a new license key 1 week ago, the installation number we had was just licensed for MaxDB as database server, therefore, it only gave 2 weeks validity of license key.
Now, we have changed our contract licensed to MS-SQL server.
Therefore, I need to get the new license key based on MS-SQL server. Since, I didn't do any reformating on the server, thus, the hardware key is still the same when I tried to get the new license key.
What should I do?
Regards,
Abraham -
Retriving the Hardware key in SAP EP 7.0
Hi Experts,
I have installed EP 7.0 in Dev server. I need to retrive the hardware key from Portal so that I can publish
the same to SAP and get the license key.
Please let me know the path in portal where I can find the hardware key.
Thanks a lot in advance.Since you are on NW 7.0 you will have to visual administrator to retrieve the h/w key. On how to do it, use this sap help link:
http://help.sap.com/saphelp_nw04s/helpdata/en/9f/5e533e5ff4d064e10000000a114084/content.htm
If you just wanna get your h/w key, you can also log-in to the o/s level using <sid>adm & use the command:
"saplicense - get"
- Regards, Dibya -
Hardware key for the sap system.
Hi Experts ,
My licence is going to expired within 3 days, i tried to request another key but Hardware key is mandatory.
I tried for Hardware key (HWID) , running the "saplicence.exe" but not found. Tcode 'SLICENCE' is not avialable.
Help me in this.
Thanks
Aisurya.if saplicense.exe is not found anywhere in your sap directory, then please download the Kernel Stack (SAPEXE_xxx.SAR) from Service Marketplace, as saplicense executable is contained in SAPEXE_xxx.SAR.
http://service.sap.com/patches
- Browse Our Download Catalog
- Additional Components
- SAP Kernel
- <choose your kernel, release>...
- < choose your OS>
- #Database independent
- SAPEXE_xxx.SAR
Regards,
Vincent -
License Installation for Multiple Hardware Keys in SAP J2EE Engine
Hi Everyone,
I have a question to ask that we have a Failover setup in our Client Enviornment.
But for SAP JAVA System I am seeing a Problem :
Whenever Failover will happen SAP System will be moved to different Hardware box
which has different Hardware Key.
1) In SAP ABAP Systems we can install Multiple Licenses for Multiple HArdware Keys
so that whenever Failover happens , no need to apply license for that Hardware key
2) But in J2ee System under License Adapter , I am not able to see any option under the same
to install another License
Under Licnese Adpater Service , I am able to see license of J2ee-engine_ora , maintanance_ora & Netweaver_ora licneses
Thanks --
Deepak GosainHi,
Try to paste the two licenses in the same file and then import the license file.
Not sure but give it a try it should work.
Regards,
Vamshi. -
SAP NetWeaver 7.01 ABAP Trial / field 'Active Hardware Key' is empty
Hello,
I just installed SAP NetWeaver 7.01 ABAP Trial Version and I am trying to obtain a licence
I log into the system with SAP* user and click on Administer SAP Licenses
I used the transaction code SLICENSE....but then the field 'Active Hardware Key' is empty (so I am not able to request a licence as I have to provide this Hardware key...)
Does anywone have an idea ?
Thanks...Hardware key should be there in SLICENSE, but anyway you can get that.
Login with <SIDADM> user and execute saplicense -get, it will give you the hardware key. when you receive the License file then you have to install the license from SLICENSE only.
Regards,
Subhash -
SAP NetWeaver 7.0 Trial Hardware key
Hi,
I installed the SAP NetWeaver 7.0 ABAP Trial Version, i used it, but my logon is expired. I would like to request a new license key, but i have a little problem. I don't know my Hardware key /or Hardware ID/. The question is: How can i get my Hardware key????
ThanksHi,
I have a seem problem, I did installed the trial software and I did get a key from SAP, but it is nearing to expired. I am trying to get another key, but it have a different serial number, for this cause, the system can not upload the license.
Exists any wayt to replace it or how I can get another licensekey to continue in my SAP system?
Note: my license says 'perm', I wanna understand that is a permanent license?
Thanks for your help.
Regards,
Nicolás. -
Active Hardware Key is missing in ECC 6.0
Hi All,
I have an issues with my ECC 6.0 system. Once I restart my application server due to hardware maintenance. Since that time, I can't logon to my ECC 6.0 except in client 001 with user SAP*. I found in transaction SLICENSE that my active hardware key is missing...
Could anyone help me with this problem ??
Rewards points will be give to you who could solve this problem.
Thank you..Dear,
Do you have a license installed ? (check the slicense status)
You may request a new license in SAP Service Marketplace at http://service.sap.com/licensekey
Please note that as of Web Application Server ABAP 7.0 the license keys are digitally encrypted. Therefore you must request a new license key for your existing or new system if you are using a SAP product based on Web AS 7.0. Request your digital encrypted license key with license type standard and install it as described in SAP note 870871.
I hope this helps,
Lucio Rodrigues -
Error in license check - Error getting the hardware key
Hello,
I'm trying to run SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition
but I still have a issue to log on, message : "error in license check"
I try everything I found in forums, I have tested the license, see the trace below.
I checked too files dev_w*
It seems there is a problem with server message
I checked in "dev_ms" file, but nothing has been wrote inside.
Please could you help ? maybe someone met the same issue and solved it.
Thanks
trc file: "dev_slic", trc level: 2, release: "700"
Test license for SAP SYSTEM: N4S
rdisp/mshost: n4shost
rdisp/msserv: sapmsN4S
MsIAttachEx: connect to n4shost / sapmsN4S
NiIInit: allocated nitab (2048 at 0xb72fa008)
NiHsLInit: alloc host/serv bufs (100/100 entries)
NiHsLGetNodeAddr: got hostname 'n4shost' from operation system
NiIGetNodeAddr: hostname 'n4shost' = addr 192.168.155.1
NiHsLGetServNo: got service name 'sapmsN4S' from operation system
NiIGetServNo: servicename 'sapmsN4S' = port 0E.11/3601
NiICreateHandle: hdl 0 state NI_INITIAL
NiIInitSocket: set default settings for new hdl 0 / sock 4 (I4; ST)
NiIBlockMode: set blockmode for hdl 0 FALSE
NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
NiHsLGetServName: found port number 0E.11/3601 in cache
NiIGetServName: port 0E.11/3601 = servicename 'sapmsN4S'
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) [nixxi.cpp 2769]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 4
"dev_slic" [noeol] 26L, 1378C 1,0-1 Top
dev_w8
M Wed Oct 19 11:46:48 2011
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicLikeyGetHardwareKey: no hwid from MSG server: -1 [sliclikey.c 1250]
M *** ERROR => wlikey_check_webas: Error getting the hardware key. You might find some information in file "dev_ms" on the message server. [sliclikey.c 1269]
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicKCheckLicense: did not get hwid from message server [slicch.c 306]
M *** ERROR => no hwid from msg-server received [likeyapi_w.c 2257]
M ***LOG Q16=> ThGetMsHwId, DpMBufHwIdGet (HWID_PENDING) [thxxmbuf.c 512]
M *** ERROR => SlicLikeyGetHardwareKey: no hwid from MSG server: -1 [sliclikey.c 1250]
M *** ERROR => wlikey_check_webas: Error getting the hardware key. You might find some information in file "dev_ms" on the message server. [sliclikey.c 1269]
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c 17124]
M
M Modeinfo for User T8/M0
M
M tm state = 2
M uid = 9
M term type = 0x2
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >SAPSYS <
M terminal = > <
M client = >000<
M conversation_ID = > <
M appc_tm_conv_idx = -1
M its_plugin = NO
M allowCreateMode = YES
M blockSoftCanel = NO
M session_id = >4E9DB1D2B02B3BF6E1000000C0A89B01<
M ext_session_id = >4E9DB1D2B02B3BF6E1000000C0A89B01<
M imode = 2
M mode state = 0x42
M mode clean_state = 1
M task_type = ZTTABTC
M lastThFc = THFCBTC
M lastAction = TH_IACT_NO_ACTION
M th_errno = 0
M rollout_reason = 0
M last_rollout_level = 7
M async_receives = 0
M cpic_receive = 0
M em handle = 2
M roll state = 2
M abap state = 2
M em state = 3
M eg state = 1
M spa state = 3
M enq state = 0
M softcancel = 0
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M msg_count = 31
M tcode = > <
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 0xa665a3b0
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M async_receives = 0
M vm = no VM
M
M *** ERROR => ThMBufFullRead: ThOpcodeToMsg [thxxmbuf.c 225]
M *** ERROR => ThMBufGet: ThMBufFullRead [thxxmbuf.c 183]
L *** ERROR => BtcEvtRaise: ThScheduler failed (target=, rc=4) [btcevt.c 223]
L *** ERROR => BtcEojRaise: BtcEvtRaise failed: jobname=BI_WRITE_PROT_TO_APPLLOG , jobcount=11414801, status=A [btcevt.c 52]Hi,
As you are running a Trial version, I do not think HA/ASCS would be relevant for you.
As you found in the dev_ms trace, the port 3601 for message server is not accessible:
NiIGetServName: port 0E.11/3601 = servicename 'sapmsN4S'
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) http://nixxi.cpp 2769
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 / sock 4
Check via command netstat if the port 3601 is free for use. The hardware key is obtained from message server and since this port is not available, neither is the message server/the hardware key. Perhaps a VM restart could also help.
Regards,
Srikishan -
Hardware key changed and license with error
I need your help, it was switched card
my network server and the time to start again
machine does not take leave SAP. to review
Because of this, is because the hardware key change, cree
a new license key with the new hardware, but
When I load it indicates that you can not validate.
Someone can help me with this.
thanks
ManuelDear Manuel Sandoval,
Try loading the license from the operation system level using SAPLICENSE command also as said above delete the existing old license and install the new license.
Regards,
Sharath -
Hello,
I installed mini sap but my license has expired.
Now , I need my Hardware key (HWID) but I don't know how can get it? .
I tried to go to saplicense.exe but I don't find.
I am a beginner so I don't know a lot .
Thanks a lot.Hi Ana,
as I know Mini SAP is a small ABAP system for learning ABAP. There is no Visual Composer available in this system, so you are in the wrong forum. Ask in ABAP forum.
Best Regards,
Marcel -
Hardware key and web authentication
is there any way to log on a web site using hardware key? any ideas?
Hi Wing,
Got no documentation explicit about this, only personal experience. You can look at note 94998, and perhaps this PDF: https://websmp106.sap-ag.de/~sapidb/011000358700005997252005
Best Regards,
JC Llanes.
Maybe you are looking for
-
How to Page Break in RTF Format
Hello XML Gurus, We are changing the reports from Oracle Reports to XML. For this, We are using RTF template. Can you Please let me know, how to put Page Breaks in RTF format. Your reply will be much appreciated. Regards Ganesan
-
ITunes: One account OK, one not
I've searched everywhere for an answer to this, without luck. We have an iMac (3.06GHz 1TB 4GB) running OSX 10.5.8 with iTunes 10.1.1. We use one log on for the iMac. However, myself and my partner have an iTunes account each. Both have worked fine f
-
How do I get image files to show up, including theme images?
I was working on a keynote presentation and sharing it with another person (google drive). All of a sudden I get the file back and all of the images are gone. This includes the theme images. Any suggestions on how to fix?
-
NAS nfs (WD Netcenter) permissions and speed problems
I have a 320GB WD Netcenter - used to use it on an older mac and now on my new one. Permissions seemed to be blocked on one of the other user accounts on this new MBP. When I do "get info" the owenship boxes are greyed out and I cannot change anythin
-
I bought a Air Port Express device from Apple yesterday. We decided to set the Air port device in a room near the router to use as a wifi extender to areas of the house where the signal is weak. In our discussion with Josh, the Apple Rep. he expla