SAP B1 Banking Query

Hi All,
I was trying to create incoming payments to one of the customers and when I click 'Add', it errors out saying 'Confirmation amount must be greater than zero'. Could you please let me know how to access the confirmation amount status.
Thanks & Regards,
Mahesh

Hi!
This is a Duplicate Thread, Please close this and follow the other one you posted.

Similar Messages

  • How can we remove the commas from the Formula value in SAP BW BEx query

    Hi All,
    How can we remove the commas from the Formula value in SAP BW BEx query
    We are using the formula replacing with characteristic.The characteristic value needs to be display as number with out commas.
    Regards
    Venkat.

    Do you want to remove the commas when you run the query on Bex Web or in RSRT?
    Regards

  • Designer support for Subquery against SAP BW Bex Query

    BusinessObjects designer has an option in the paramaters window to turn on "Allow Sub-Queries" in a universe that has been created using a olap source.  SAP BW BEX Query to be specific.  Once turned on, you can build a query and the subquery button and functionality is actually enabled and allows you to build it.  When running the query I get an error message "A filter contains a wrong value. You cannot run this query". 
    Now, I am pretty sure this functionality is not supported on a BW or OLAP source but, I can not find anything definitive from SAP stating that it is not supoorted.  So I want to make sure that this is not one of those situations where everyone just says "It's not supported" but really just doesn't know.  Does anyone have the official word or link to an SAP statement that this functionality is officially not supported.

    What I would say is, it won't support. The reason could be, as its not support any structure view in universe designer, that means we cannot create any derived tables where we could use sql query.
    I believe the same applies  here too. Even if you look at LOV defintions in universe, it won't show any query.
    So the same applies to reports.
    Hope this helps.
    Regards
    Gowtham

  • Connecting Crystal Reports to SAP BW BEx query

    Post Author: mfrank
    CA Forum: Data Connectivity and SQL
    We have used Crystal Enterprise 8.5 to connect to an SAP BW BEx query in the past, however we are having some difficulties.  Rather than trying to upgrade our old CE system, I've been told that we should be able to connect Crystal Reports (2008?) directly to the BW BEx query.  I've been trying to accomplish this, but can't seem to find any drivers that will allow the connectivity.  When I try to set up a connection using OLAP, the only two options listed are Hyperion and Microsoft OLAP.  I have an old version of Brio Query (now Hyperion, now Oracle) that does show up with a driver for BW, but this doesn't show up in my Crystal options.
    Can someone give me some advice as to how to connect Crystal Reports to SAP BW?  I realize there are licensing issues with running live data without using Crystal Enterprise (or later BO products), but I'm just looking to print a report to a PDF.
    Thanks

    Post Author: A Kumar
    CA Forum: Data Connectivity and SQL
    Hi mfrank,
    I am also facing a similar kind of a problem. Did you get any solution to your problem. If yes, kindly let me know.
    Thanks
    A kumar

  • How to work with sap bw bex query structure

    Dear Friends,
    How can we use SAP BW bex query structure in crystal reports.
    Thanks with regards.
    Malik

    i have two structure in my query.
    and structure is comming in my Crystal report.
    i have 10 memebers in that structure and i make display off for some of members .
    but in crystal all of members are comming either its property is hidden or not.
    any help higly appricated.
    Regards
    Malik

  • Is there any standard REconciliation report in SAP for Bank

    Hi All,
    Is there any standard REconciliation report in SAP for Bank....?
    Thanks in advance
    Regards
    Amit Mistry

    Hi Ashok ,
    This report RFEBKA00 imports account statements into the SAP System and
    then creates batch input sessions for updating in G/L accounting and *
    in the subsidiary ledger. It does not print any report - as far as I can see.
    Cheers
    Kartik

  • SAP BW Query Vs SAP BW MDX Query

    Dear Gurus,
    Can someone please tell me the difference and advantages of connecting Crystal Reports2008 to  "SAP BW Query" & "SAP BW MDX Query"while .
    My main concern being SAP BI resource is , we don't create SAP MDX queries in BW.
    Regards,
    -Neha

    Hi Ingo ,
    So the Crystal report  datasource will be SAP BEx queries when we select the connection SAP BW MDX Queries .
    My question is do we have to write MDX statements somewhere in SAP BW  or the system will automatically generate when we select the SAP BW MDX Queries ?
    Regards,
    -Neha

  • Sap transactional banking

    Hi,
            For the last 3 years i am working in Bank.Now i want to shift into SAP field.I am interested to do SAP transactional Banking module.
    is it will be a right decision to shift in SAP banking ?
    Where to get training &  certifications  & job assistance ?
    how is the scope & apart from sap is banking which module will be good for me...I did MBA(Marketing) ..having 3 yrs work exp in bank.

    Please refer training.sap.com
    for your training needs at SAP
    https://training.sap.com/shop/certification/c_fstban_80-sap-certified-application-associate---transactional-banking-in-s…
    If you are looking for abroad opportunities, then there must be good opportunities for SAP Banking, particularly western countries like USA, Canada, Europe.
    There are already thousands of people in SAP FICO, I do not want you to end up in the same boat like others.
    You can still go with SAP Banking, number of Indian software companies / offshore software companies supporting / implementing SAP Banking for number of banks. Because of limited consultants, you may get a chance to get a break in SAP Banking Area. Then you can put up some onsite experience, which should be critical for your growth.

  • Difference between sap query and sap ad hoc query

    Hello Experts-
    Is there any difference between sap query and sap ad hoc query. If yes, I will appreciate if you can provide some input.
    Thanks,

    Hi,
    SAP Query
    Purpose
    The SAP Query application is used to create reports not already contained in the default. It has been designed for users with little or no knowledge of the SAP programming language ABAP.
    SAP Query offers users a broad range of ways to define reports and create different types of reports such as basic lists, statistics, and ranked lists.
    Features
    The SAP Query comprises five components: Queries, InfoSet Query, InfoSets, User Groups and Translation/Query.
    Classic reporting- the creation of lists, statistics and ranked lists- are covered by the InfoSet Query and Queries components. Other components’ range of functions cover the maintenance of InfoSets, the administration of user groups and also the translation of texts created in the SAP Query.
    All data required by a user for a report can be read from various tables.
    To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. In the WYSIWYG mode, you can edit the lists using Drag & Drop and various toolbars.
    AD Hoc Query
    Definition
    A Web item that enables you to create and change queries in a Web application on an ad-hoc basis.
    Use
    You can use the  Ad-hoc Query Designer Web item in the Web Application Designer to structure Web applications in which you create or change queries. The Web item is as a tool for designing ad-hoc queries in a Web environment.
    In particular it enables you to:
    ·        Create queries by assigning characteristics from an InfoProvider to rows, columns, filters, and free characteristics, and including key figures from the InfoProvider in the key figure structure of the query.
    ·        Restrict or filter key figures and characteristics
    ·        Use predefined key figure structures and restricted or calculated key figures in the query
    ·        Set or change query properties and key figure/characteristic properties in the query
    ·        Create or change conditions and exceptions
    When compared with the BEx Query Designer, the Ad-hoc Query Designer Web item has the following restrictions when creating or changing queries:
    ·        You cannot integrate variables into the query directly.
    However, you can use variables in reusable structures, or restricted or calculate key figures, which are used in the Ad-hoc Query Designer
    ·        The query can contain only one structure. This structure has to be the key figure structure and be in the rows or columns of the query.
    -        You cannot use key figures or key figure structures in the filter.
    -        You cannot define exception cells, since this requires two structures.
    You cannot create the following objects using the Ad-hoc Query Designer Web item:
    -         Reusable structures
    -         Reusable restricted key figures
    -         Reusable calculated key figures
    -        Local calculated key figures
    You can create local, restricted key figures using the Ad-hoc Query Designer Web item.
    You can edit existing queries in the Ad-hoc Query Designer Web item, if the queries adhere to the restrictions laid out above The Ad-hoc Query Designer checks these requirements when loading a query. If the query is too complex, the query can be loaded into the Ad-hoc Query Designer but you cannot change it there. You then receive the appropriate message. You can still check and execute the query.
    "Ad Hoc" is a Latin phrase which means "for this purpose" and in today's parlance generally means "on the fly," or "spontaneously."
    An ad hoc query is a query that is run at the spur of the moment, and generally is never saved to run again. These queries are run using a SQL statement created by a tool or an administrator. So therefore, such a query is one that might suit a situation which is only there for the moment and later on will become irrelevant.
    As queries become more complex, it can be difficult to write them correctly ad-hoc. To help with this, one can instead write the knowledge needed for queries as business rules in English, and then use a system called "Internet Business Logic" to automatically generate and run the SQL queries. One can then get explanations of the results, in English, at the business level.
    Check these links....
    http://help.sap.com/saphelp_nw04/helpdata/en/1f/03223c5f00612be10000000a11402f/content.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80bf2f79-021d-2a10-5082-dadc79aaa92c
    http://www50.sap.com/businessmaps/27FEEF3A12444F89A8524CCACAF4F5BF.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/15/00a042b443c56ae10000000a155106/content.htm
    Reward points if useful....
    Regards
    AK

  • SAP IS BANKING SDN FORUMS

    Hello all,
    Can you help me SAP IS BANKING SDN FORUMS links
    Regards,
    Nagesh.

    Hi ,
    As of now only help.sap.com only for IS- Banking information , other wise we need to take help of SAP LABS provided Material
    Regards
    Shasi

  • Sap is-banking

    Hi,
    Good day experts.
    This is kk. i've been working as a developer. now i'd like to enter in sap is-banking. so could u plz send any help doucmentation and help links on is-banking.
    and give me guiedence on is-banking
    regards
    kk

    Dear kk,
    welcome the the SAP banking community for projects.
    To support your understanding, we have divided Banking into three dimensions:
    1. Banking business applications vs. process platform/service repository/NetWeaver
    2. Applications on SAP ERP (Deposits, Loans Management) vs. applications on banking services (Deposits Management, Master Contract Management and Bank Analyzer)
    3. Analytical vs. Transactional Banking
    So there are enough focus areas to pick in consulting
    1. SOA engineering, process transformation
    2. Integration expert
    3. Migration of data and business rules
    4. Business content and solution consultant on transactional or analytical applications
    The docu is also split according to dimension 2:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/7a/9aa43556903266e10000009b38f839/frameset.htm
    for Banking on ERP
    http://help.sap.com/content/documentation/industry/index_bank.htm
    for Banking on banking services platform.
    Any follow-up, please post again.
    regards Ralf

  • Query on SAP IS Banking - SAP Deposits Management/ SAP BCA in ECC 6.0

    Dear all,
    In SAP Deposits Management in the new platform, we have the node Financial Services both in Easy Access and IMG under which we have the major functionalities like Account and Product Management. However this is unavailable in ECC 6.0. Request you to clarify whether these functions are available in SAP ECC 6.0 under SAP Bank Customer Accounts.
    Regards
    Subhobrata

    Dear Subhobrata,
    to answer your immediate question on Deposits Management, please read my lines below.
    Maybe consider posting similar questions only here in this Forum you rightly chose: Industry Solutions General.
    Most industry consultants from the banking practice are contributing and posting there.
    The straightforward answer to your question is
    No, the nodes published for the "banking services from SAP" process platform (Deposits/Account Management, Analytical Banking) are not published again in ECC 6.0.
    Installation procedures, components and licenses are completely different.
    This is due to different architectural design, IT and banking business requirements.
    The node Financial Services is one application platform (the most recent application release is 7.0 on NetWeaver 7.11) that comprises
    + transactional banking with the components for managing, posting to and servicing of current accounts, savings, deposits, loans, collaterals and hierarchies of accounts for purposes of cash & liquidity (cash pools/sweeps) and global limit management
    + analytical banking with the components for managing risk, ALM, analytical (bank-unit-internal) limit and BASELII requirements.
    The single-purpose application component of Bank Customer Accounts on ECC does not handle this variety, yet focuses on current and yield account/demand deposits for special-purpose banks/financial institutions.
    regards
    Ralf

  • Banking query- SAP B1

    hiii experts
               i am presenting a scenario here plaz guide me sequence in sap b1
    "A customer has paid 10000 rs as a payment on account to the company, and  after a transanction with the customer company has raised an invoice for 15000 now there is no link with the amount that the customer paid and invoice".
               so pleaz advice me how can i map this in SAP B1
                                                                                    Regards RIYAZ

    Hi,
    In SAP Business One,goto banking-bank statements and reconciliation-link invoices to payment.
    This function enables you to link an A/R or A/P invoice with an incoming or outgoing payment document that was not based on an invoice.
    Now link your invoice of 15000 to incoming payment of 10000
    hope this helps u.
    Regards,
    Swapnil

  • No data in Crystal report created on SAP BW BEx Query

    Hi Experts,
    I am trying to create a Crystal report on top of a BW query. I am able to login to the BW system and open the BEx query and the objects are coming into the crystal report.
    But when I drag and drop some objects into the details area and try to preview sample - it does not show any data (it shows accessing database but doesnt bring any data)
    I copied the generated SQL query in to the section in the BW system in transaction code 'MDXTEST' and it runs correctly and shows me the result below there.
    Just to try - I unchecked 'Use MDX..' check box by following the path SAP->Settings to check if that could bring back data ... and YES that worked which means data is not coming from the BW query with MDX connection but when MDX seems to be fine and retrieve result when I run the sql statement in tcode MDXTEST.
    Also when I do preview samples - I can see in SM50 in BW system that it is trying to run the report just that I am not able to see any data in my crystal report.
    Any help in this regards would be greatly appreciated.
    Thanks in advance.
    Regards,
    Sunny

    Hello
    The order of display of attributes in Webi and Crystal report would be different.
    Collapse the infoobject and skim through the attributes, you should be able to find them.
    Vishal

  • SAP MT940 bank statement interface to SAP

    Dear expert,
    We plan to integrate the bank statement in SAP MT940 format to SAP. Can you please kindly share if you have any information on how to configure the SAP for uploading the SAP MT940 format?
    The configuration guide that I have is : FI Electronic Bank Statement from SAP R/3; based on this guide the recommended bank statement format is in Multicash Format.
    Thank you very much in advance for your kind assistance.
    Best regards,
    DTan

    Hi Tan,
    Based on the external transaction type, you will link to the posting rules. Yes there are so many subfields, available if you see 61 fields, it tells you about the payment you have received/made, it gives the line item details of a particular transaction.
    My sincere request is dont look at the bank statement and do the configuration. Do the configuration first and then SAP provides one program RFEBKATX. Using this program you can create a bank statement file and customer line items. Once after bank statement file is created you can import it using FF_5 and if your configuration is not properly made, it will let you know where you are missing. But this program will generate bank statement file in multi cash. How ever if your configuration is correct and if you are able to import bank statement, then there will not be any difficulty in importing MT 940.
    Hope you understood.
    Regards
    Srikanth

Maybe you are looking for