SAP B1 Client is not showing any company after installing Windows 7

Hello experts
By installing Windows 7 on a computer which had Windows XP installed before and trying to re-install SAP B1 client on that computer, company list is being displayed as empty. This is only happening on this computer as it is the only one which has been upgraded to Windows 7, SAP client is displaying all companies if it is run in other computer. So the issue is only affecting this computer.
Thanks and regards

Hi Javier,
Please check below links.
Company list empty in login screen SAP B1 9.0
[SAP Business One 9.0] Company Databases not appearing
SAP Business One Client Not Install In Windows 7 Proffesional
Hope this help
Regards::::
Atul Chakraborty

Similar Messages

Photoshop CS6 is not showing any network drives within windows 8.1.

Photoshop CS6 is not showing any network drives within windows 8.1, I can only browse the local disk for files. Please advise?
And when i try opening a file directly from the network, photoshop starts but does not open the selected file?

The dialog you show there looks like it may be a CS6 open dialog running on windows 8.1 that is showing what is local. Network is not highlighted selected.
Here is a CC Open one windows 7 pro showing areas of what is accessible.

R12 Invoice Concurrent LOV not showing any Invoice after upgrade from 11i

Hi All,
We had 11i instance and then we upgraded to 12i.
Now one seeded program named "Invoice Print Selected Invoices" has a parameter called "Transaction Number Low"
, having LOV AR_RAXINV_TRX_NUMBER ,
does not show any record in R12.
When i opened LOV i could see following tables:
1. RA_CUSTOMER_TRX
2. RA_CUST_TRX_TYPES
3.AR_LOOKUPS L1
We are using this value set for one of our custom object too.
I was wondering if it is not pulling any data for seeded how it could it pull for custom objects.
I am a newbie in R12.
Any one has any idea why is it so , i can speed up my work and learn from your experties.
Thanks,
Swapnesh Parmar

Hi
Did you get the above sorted ? how ?
I have a similar problem with Selected Invoice Print where the Transaction Type parameter lov doesn't show any values. The seeded value set uses ra_cust_trx_types which (in R12) is a synonym for ra_cust_trx_types_all.
There is data on ra_cust_trx_types_all.
Pam

IWeb not showing iPhoto library after installing Lion

Hi, can anyone help with this issue ?
Since I have installed Lion, the iPhoto library that showed up on the right hand side of iWeb is not showing up.
Has anyone else also faced this issue after installing Lion ? Is there a solution ?

Thanks for your reply, but the Media is turned ON, I can see the iTunes content but no pictures from iPhoto.
It keeps on showing, "Loading photos".

S_ALR_87012178 does not show any data after upgrade from 4.6C to ECC6

Hi Gurus,
We do upgrade and do testing to all functional process realted.
When open S_ALR_87012178 in SAP ECC6 no data showed, but in old version (SAP 4.6C) data showed although we select the same parameter selection.
Any setting missed ? or any suggestion about this issue.
Thx in advance.
Tri Wicaksono

Hi Tri,
Check the following.
I have checked your request, and there are two 'ways' the report
will send out the data:
1. In a 'normal' list
If you call the report in the 'standard' way, the data get displayed
in a normal list. This is the standard.
2. If the 'ACCESSIBILITY_MODE' flag is set in the user parameters.
With this flag, the reports output is done with the ALV Grid display.
About this ACCESSIBILITY_MODE flag, refer to the note 929036,
which describes the 'function' of it.
Regards,
Fernando Evangelista

Ipod 6th gen not showing any music after successful sync

Hi all,
My ipod 6th gen has just started doing something odd.
When I plugged it in it said it couldnt be read and I had to restore it.
I did this, but now when I sync'd all my music back to the ipod, it seems to work, but when I unplug the nano and try to play some music there is nothing available to play.
Any ideas?
I have the latest version of itunes, and the ios on the iPod is up to date.
The Sync seems to work, and in itunes you can see that there is music on the ipod. But the ipod itself shows nothing available to be played.
Pls help!!!!!

Same problem as here: https://discussions.apple.com/message/19099083#19099083

My external harddrive is not showing any files after a mac partition

I transfered my files from my pc to the external harddrive. The instructions for the external harddrive said I needed to partition the drive to make it mac-compatible. After partitioning, I couldn't find any of the files that I transferred.
Can anyone help me find the files on the external hard drive?

abbey road wrote:
I transfered my files from my pc to the external harddrive. The instructions for the external harddrive said I needed to partition the drive to make it mac-compatible. After partitioning, I couldn't find any of the files that I transferred.
Can anyone help me find the files on the external hard drive?
Hi and welcome to Discussions,
did you do the partitioning after you have copied the files to the external harddisk ?
If so, then they are gone.
A repartitioning of a harddisk deletes everything that is on that harddisk at that moment.
If the files are still on your PC, then just reconnect the external HD to your PC and copy the files again.
Regards
Stefan

X1 Carbon integrated camera working but not showing any image after Windows 8.1 upgrade

Good afternoon, sundely after I upgraded Windows to version 8.1 64x my integrated camera stopped sending image to any program that uses it, the green light goes on but there is no image. Before worked just fine.I have tried to uninstal and install again camera drivers, installed Lenovo dependency package, etc....no solution.Please help?Thanks Sergio

I resolved my issue by going to device manager selected View then View Hidden Devices.
Expand System Devices
Found two IWD BUS devices and one had the yellow triangle. I uninstalled that item and restarted my Carbon X1 and the error was gone. The original working IWD BUS remains active.

OS X Server Calendar Service not showing any events after upgrade

Hello,
I recently upgraded my Late 2012 Mac Mini Server that was running Mountain Lion and Server 3.2 to OS X Yosemite and Server 4.0. After the upgrade I got a lot of calls from users who state that all of their calendar items have been erased from their iPhones and iPads. I also noticed the same thing on my calendar. Does anyone know how I would restore those times? Has anyone noticed the same thing after an upgrade?
Thanks!

Correction... I am running Server 2.2.4.

WRT160NL DHCP reserved clients are not showing up in the DHCP Reservation window.... Why?

I have 5 computers linked to my router. 4 are hardwired and I set it up so that each of the 5 has it's own static address. One of those computers is my DVR security camera system so can monitor my cameras remotely. It was working fine for years and now I can't access the DVR remotely anymore. I notice in the router Setup that the DHCP clients are not showing up as active even though two of the computers are on. I am running XP Pro on these machines and I can PING between them so I know some communication is going on. Also I can access the DVR cameras from my main computer using the internal IP address I assigned to the DVR, but not if I try to use my current WAN IP address.
Would appreciate any advice on troubleshooting this problem.
Thanks
Solved!
Go to Solution.

It may have something to do with the firmware of the router. I suggest you should do that. The firmware that you can download from the Linksys website is version 1.0.0.3 Build 2. (http://support.linksys.com/en-us/support/routers/WRT160NL). After the upgrade, reset the router to factory settings (pressing and holding down the reset button). It is best to re-configure the router from scratch also. Try to power cycle your whole network as well.

Parameter not showing any results

Hi all,
To start off, I am a SAP BI consultant starting to learn crystal report, so I am quite a novice.
Currently I have a problem with parameters, I am using the xtreme.mdb to learn crystal report.
My crystal report is 2008.
My report is quite simple, it has customer id and customer name. I have created a parameter using dynamic list of values instead of static. The value of the datasource is customer id and the "allow discrete" value is set to true.
So far, no problems. When I inserted the parameter in the report and preview it, the report comes up with a popup with a drilldown arrow. When I click on the arrow it is not showing any values.
Also, clicking on "OK" or "Cancel" in the popup doesn't do anything.
Can anyone please help?
thanks in advance,
James

Hi james,
Please go through the thread
Re: CR XI - Command Parameter Not Working
regards
Baby

Not showing any results V_V2 resheduling sales and stock transfer documents

My client using IS Retail . First i create sales order i want resheduling perticular order through V_V2 i enter article and site ,process sales documents,process stock transfer order,unconfirm quantity and leave simulation but it does not showing any results...previous showing from 2008 to 2010 sales orders only....
Please give answer i am waiting your reply...
Edited by: amitp2121 on Mar 3, 2011 11:57 AM

Hi Hweiling,
In my opinion V_V1 used to create confirmed backorder (line item where confirm quantity in first schedule line is 0 and there is no second schedule line) .
V_V2 is used when you want to alocate your stock based of priority or some criteria.
For example you have order 1 that created on 07.2007 confirmed but you hasn't delivered yet, then you have order 2 that created on 08.2007 it's not confirmed, and you have the other order 3 that create on 01.2008 and it's confirmed ready to deliver 03.01.2008. You can use V_V2 to alocate the stock to first order, 2nd order and third order. So you can deliver the first order first, 2nd order and then the 3rd order will be in backorder.
If you run V_V1, it's only update the stock for second item (if stock is enough).
If you think why it's not update the order that you want when you run V_V2, please check the criteria and the stock.
Guys please correct me if I am wrong.
tsalasi

Team calendar My trainings not showing any DATA on Production Server

Dear ALL,
We are facing very critical issue on Production Server.
We have two Id's for which Team calendar, My trainings is not showing any DATA .
We observed that this is happening to both the users who had MSS role previously..
now for your information we have check the following things already .
1. RFC PT_ARQ_TEAMCALE_GET is showing DATA correctly .
2. The authorization. Is correct..
3. We got help from SAP..But not solved problem.
Here we copied same data in the Quality system and the Team calendar, My trainings working fine ..
I donu2019t know why Team calendar, My trainings is not showing any data in the Production system
Let me know ASAP.

Hi,
All r correct in both system .............even following things i have checked .................which i got from reply from U.
01.07.2009 - 11:29:52 UK - Reply by SAP
Hello Pinki
You need to check the settings in your different systems
the #group of organizational views# MSS_LTV_EE is maintained
for the Team Calendar and MSS_LEA_EE for the request mode.
Check the IMG step
Integration with Other mySAP.com Components ->
Business Packages/Functional Packages -> Object and Data Provider
-> Organizational Structure Views -> Group Organizational Structure vieMSS_LTV_EE (Team: Employee selection): the two organizational
views MSS_LTV_EE_ALL and MSS_LTV_EE_DIR are assigned.
MSS_LEA_EE (Leave Request: Employee Selection) the two
organizational views MSS_LEA_EE_ALL and MSS_LEA_EE_DIR are assigned
These organizational views are defined in IMG step #
#define Organizational Structure views#:
They have the following Object selections:
MSS_LTV_EE_ALL: MSS_LTV_EE_ALL (All Employees)
MSS_LTV_EE_DIR: MSS_LTV_EE_DIR (Team: Direct Reports)
MSS_LEA_EE_ALL: MSS_LEA_EE_ALL (All Employees)
MSS_LEA_EE_DIR: MSS_LEA_EE_DIR (Absence: Directly Subordinate Employees)Then you have to check the IMG step # Object
Also check these
Please use the evaluation path "ORGASS".
To change the evaluation path kindly go to the view V_TWPC_V , look for
the ESSDIR view and double click on the ESSDIR.
Please check the above customisation,
Tthe evaluation path SAP_MANG is used to determine
the root objects. "Eval.Path for Root Objects" on the detail
screen in the view V_TWPC_V "View Definition" for further information onthis topic).
Also check the customisation using
report RHSTRU00
In view V_TWPC_VG, the view group PTESS of view ESSDIR with position
01 should exist. Please correct it as well
and ensure that
In the View Cluster(T-Code SM34) VC_TWPC_ORGVWGRP there should be
a record for the group 'ATTEND'.
Hope this will help you.
Best Regards,
Siddharth Rajora
HCM
SAP LABS India

Tables & Index not showing any data

Hi All,
I have done the db2 upgradtion from 9.1 to 9.7 with fix pack 4.I am unable to see table size after upgrade. I have checked all the sap collector job running fine.
db02>history>tables& index not showing any data
Regrads,
Mnai

Please make sure RSCOL00 running or execute it manually.
Did you try to run the stats in DB13 ?

HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

SAP B1 Client is not showing any company after installing Windows 7

Similar Messages

Maybe you are looking for