SAP B1 Client upgrade in Vista Ultimate OS

I am using Vista Ultimate. I am able to install the SAP B1 2005 B client in the Client system. I am unable to upgrade the client. It gives me an error saying that wrong user name or password. I am fully sure that the user name and passwords are right. Please help

Method 1 - When installing from the Client Setup folder in B1-SHR folder
1. After we choose the path to install the SAPB1 client, one window pops up asking the Database server LoginID and password.
2. On giving the correct login credentials, the following error message is given by the system. 'Wrong User Name or Password'
Method 2 - When Installing from the CD
1. The SAP B1 client is getting installed in the Client computer.
2. When connecting to a company after giving the login credentials, the system asks whether to upgrade the client to a higher patch version. On clicking 'OK', then system gives the following error message 'Wrong User Name or Password'
I have installed the same SAP B1 client in the xp computers. Hope I have clearly explained. Thanks

Similar Messages

Camera not working after upgrading to vista ultimate

So I upgraded to vista ultimate and since then the camera hasn't worked. I don't have it turned off, and i went to device setting to see if it was working properly and also tried updating the driver. Everything seems to be in order, the camera just doesn't work. anyone have any ideas?

is it ultimate 64? if you dl the driver from lenovo's website it probably doesn't support 64bit, i had tons of trouble with my camera before too but eventually it kinda fixed itself. I think the device just wasn't being recognized by windows and the driver never completed installation but after a few reboots it gave me a notification saying that it was indeed finished installing and since then it worked great.

Upgraded from Vista ultimate to Win. 7. Don't know how to install the tv tuner

I upgraded from Vista ultimate to Win. 7. When I tried to install the TV tuner, nothing seemed to happen.

Save the TV Tuner driver to the desk top and use 7zip to extract the files. There may be a folder there named SRC. Open that and look for the Windows install icon.
If you give me your full model number and the version of W7 (32 or 64 bit) you are running I can help you further with this manual installation procedure.
http://www.7-zip.org/

6 Buttons do not function on Satellite U400-10O after upgrading to Vista Ultimate

Hi,
I have upgraded my U400-10O from original Win Vista Home Premium to Vista Ultimate, installed each and every driver and utility program, (some of them, e.g. TVAP several times ;-)
However could not succeed to operate the multimedia shortcut buttons, Led on/off, Media Player, Play, etc... They were functional with the original setup, but I need this Win Ultimate.
What is the real solution to let them work?
Thanks,
EIO.

Hi Jimi,
I have tried to unistall/reinstall the VAP several times, by checking/unchecking that "Toshiba Button Support" however, none helps.
Actually, I also wanted to unistall the control utility first to start from scratch, but I cannot find it at all! Really, what is this "control utility" supposed to be??? I have found several controllers, control managers, and specialized utilities, but I cannot find "THE" control utility.
Is there any place where I can complain about my status to Toshiba? Or how can I access to that legendary thread owner "Mouxy - Daniel" who appears to have the solution? http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=34487
Best,
EIO.

No sound or progress bar movement in iTunes with upgrade to Vista Ultimate

I just upgraded my computer to Vista Ultimate and my itunes does not play sound, although other applications on the computer do. Just in case, I downloaded the latest driver for my sound card. Also, the progress bar at the top does not move, although itunes shows that the song is playing. I have tried uninstalling and reinstalling several times as recommended by the ITS people at my school to no avail. I backed up my music and completely wiped everything itunes and then reinstalled but it's still doing the same thing. Please Help!
iPod 30 GB Windows Vista

Hello
Because you wrote here already third time I have tested clean Vista installation on Qosmio G30-126 but the same PQG32E like yours.
I have installed Vista ultimate and the sound works without installing sound driver. Anyway install sigmatel sound driver. Please after Vista installation install Value Added Package at first. After doing this install:
- display driver,
- sound driver,
- Synaptics TouchPad Driver
- Software Modem and so on.
I hope everything will be OK.
Bye and good luck!

GX720 problems after upgrading to Vista Ultimate (SOLVED)

Hello.
I have just upgraded my GX720 from Vista Home Premium to Vista Ultimate in order to be able to connect to our domain at work.
The upgrade went without trouble, but I have run in to a small problem with the touch buttons above the keyboard.
The media controllers, and on/off buttons for webcam, bluetooth and W-lan works with out problems, but the Eco and Turbo-button stopped working.
I'm guessing there is some part of the software/drivers from the original installation that went haywire after the upgrade and needs reinstalling, but I have no clue as to what to reinstall.
Any help would make me very happy
As far as system specs I have done no upgrades to bios or firmware since delivery in june but I'm unsure as to the versions running, the only thing I have done is upgrade the drivers to the Wlan as far as I can remember.
I can also add that I tried to do a EC-reset, and a reinstallation of the SCM with no change. Trying to start the SCM manually with the MGSysCtrl.exe only results in a program crash (The program has stopped working).
Kind regards
Mikael

I would say, remove SCM.
Reboot
Goto program-files or whatever the directory is called in Vista, delete the MSI SCM folder
Reboot
Run http://www.ccleaner.com/download (beware of the install options or you get a toolbar for free )
Run cleaning and registry cleaning (until there are no errors left!)
Reboot
Download and reinstall SCM for your machine.
I hope this works, should be. Else use an older version of SCM, like the one that came with your machine.
Good luck.

Upgraded to Vista Ultimate 3000 n500

Hello,
I have a lenovo n500 3000 4223 53u laptop. I went from XP to Vista Ultimate and I am having trouble installing drivers for this. I have gone to help and support for the drivers and I believe I have installed the correct drives but I am still having problems. The biggest issue is Wireless internet. I have tried to install those drivers but they are not working so I have no wireless internet. Is there something I can download that would help me (all in one package?).
Thanks.

Check version of Vista Ultimate. Is it x32 or x64. Because there are no drivers for x64 OS
If you need translating agency - contact with me!

Pre7 after upgrade from Vista to Windows 7 (Ultimate 64bit)

I recently upgraded my Vista Ultimate (64bit) computer to Windows 7 Ultimate (64bit). This was an upgrade, not a clean, fresh install. Today is the first time I have tried to run PRE7 under Windows 7. Prior to the upgrade, I had no problems to speak of with PRE7 and the PhotoShop.com Plus account that I set up with it. Now whenever I start PRE7 under Windows 7, I get the "Install Full Content" dialog informing me that a reduced set of content has been installed and that I need to install the full set of content from the installation DVD. Now believe me when I say that the full set of content was installed under Vista and that I never got such a dialog box prior to Windows 7. In addition, after clicking OK to continue, the PhotoShop.com membership did not log on automatically as I am used to it doing. I don't remember exactly now what I had to do, but to the best of my recollection, after I logged on to my account it was telling me that I needed to verify my account, which I did. I subsequently received an email with a verification link in it. After clicking on the link my account was verified and now when I start PRE7, it automatically logs me on to my PhotoShop.com account, as I am used to it doing. I still get the "Install Full Content" dialog, though. I thought I would ask in this forum if anyone else has experienced these two anomalous behaviors after ungrading to Windows 7, before I attempt to go thorough the motions of actually reinstalling the full content, which should not actually be necessary.
Thank you,
Charles Lawrence

Why it's happening is a mystery. My guess would be that the upgrade in the OS is part of the problem, but that is just a guess. Some have reported that Win7 does the upgrade thing better than any previous OS, but others report all sorts of odd problems, when doing it this way.
If you have the DVD, then I'd try a Repair Install, to see if it picks up the Functional Content.
Otherwise, I am at a loss as to why, when you upgraded your OS, PrE 7 lost the link to that material.
Good luck,
Hunt

T61p upgrading Windwos Vista Basic to Ultimate

So I finally got my laptop on July 29 after ordering it on the 15th, and i am VERY happy with it. The build quality is amazing!
Anyways, when i ordered the t61p i always thought of downgrading it to xp pro, so i orderd the windows vista home basic, but i just found out that if i downgraded to xp my intel turbo memory will go to waste so i guess no downgrading for me! so instead i might as well upgrade to Vista Ultimate. So before i upgrade i assume everything will be wiped and i need to burn recovery discs/drives? unlike other companys such as HP since i have a hp laptop it has another drive that is the recovery drive, IBM does not. and when i pres thinkvantage and do Backupnow i hve to back up my harddrive as well? i want to just back up my system vista basic incase i mess up. if i have to then do i just do a backup and plop everything in a DVD and burn it? after that i put in my vista Ultimate and follow onscreen instructions right? any help would be great! i don't want to do anything until i get replies from somebody that has more experince than me at this..!
thnak you!!

Hi,
IDT High-Definition Audio CODEC Driver here
All drivers for Your model You can get from here. Just choose there Your system version.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Upgrading from Vista Home Premium to Vista Ultimate

This is a question for someone at Toshiba:
I have a copy of Windows Vista Ultimate DVD (given away a at conference I attended) and I'd like to use it to upgrade my Satellite laptop to Windows Vista Ultimate. This morning I did a clean install using this DVD but then when I installed the Toshiba drivers I found the HD-DVD player would not install.
I assume becuase it did not recognise the laptop as a Toshiba laptop, is this correct?
I hence used the Toshiba recovery CD to get back to a working laptop again (and spent all afternoon recovering all my files from backup) but I still want to upgrade to Vista Ultimate. I could just change my system's product key (from Control Panel -> System) to a Vista Ultimate key but I'm concerned the Toshiba Value Added software (HD-DVD player, etc) will stop working.
Alternatively I could do an upgrade install from the DVD though this will take ages and again I'm concerned the Toshiba Value Added software will stop working.
Can someone at Toshiba confirm the safe way of upgrading to Vista Ultimate.
Thanks,
Darren

Hi Darren
Just one thing at the beginning:
>This is a question for someone at Toshiba
Sorry but you have misunderstood something. This is user-to-user forum and you will not get answer from Toshiba directly.
Back to described issue:
I have very good experience with Vista upgrade. I have installed clean Vista Ultimate version on my Satellite A200 notebook. All necessary drivers, tools and utilities you can find on Toshiba support page.
About Toshiba DVD player I can not say anything at the moment but reading similar posts it must be just an update and because of that it can not be installed on your notebook.
For me the best solution for you is to change activation key and use Vista Ultimate. When activated you can update all Toshiba stuff including VAP. It has no influence on preinstalled OS version.

Will Windows Vista Ultimate upgrade using Win 7 Enterprise Upgrade

My pc is currently running Windows Vista Ultimate 32 bit. It was running 64 bit originally, but because of certain business applications that only ran on 32 bit, we had to downgrade to 32 bit. By the time they got the programs updated, it was
too late (cost and time-wise) to return to 64 bit version.
I recently purchased Windows 7 Enterprise 32 bit, because a Microsoft technical support person told me that Enterprise would be the upgrade to use. When I recently read "Windows 7 Upgrade Paths" it appears this is not the case. Will
I be able to upgrade from Vista Ultimate to Win 7 Enterprise, as I was advised? If not, then Microsoft just cost me a lot of money!!
Thanks
Dave

Hello Dave,
Based on my research, Windows Vista Ultimate can’t upgrade to Windows 7 enterprise.
For more information, please take a look at the following article about Windows 7 upgrade path.
https://technet.microsoft.com/en-us/library/dd772579(v=ws.10).aspx
Windows Vista Ultimate can only upgrade to Windows 7 Ultimate.
Please contact the support to check if you can return the Windows 7 enterprise. For more information about return, please take a look at the following article.
http://www.microsoftstore.com/store/msusa/en_US/DisplayHelpReturnsRefundsPage
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Vista Ultimate Will Not Install Zen Mi

I have browsed the posts for two days and I cannot find a remedy to this problem. I upgraded to Vista Ultimate a few weeks ago and I just tried to add my MP3 player yesterday. I figured I would just format the thing and flash the firmware cleanly anyways to make sure everything was ship-shape because I wanted to re-build my library on it anyways. So I plug it in to Vista and it gets recognized and says it is starting to install the drivers. It gets near the end and then it fails saying that?"Vista cannot install the drivers for MTP Device"?"The parameter is incorrect". This is really not making much sense to me because as I said I just reflashed the firmware correctly with the 2.xx PlaysForSure firmware and it works correctly in XP Pro with WMP. I cannot find one bit of support on this issue and it is really irking me. Does anyone have any answers or help?

Sorry am running out of ideas.
The driver it should be using is the MTP driver that is in windows vista.
Not sure why its not linking up and working right.
Been searching some of the articles about the Zune players, and they mention the following procedure for the Zune device when they do this: (Zune's are MTP devices as well)?# Make sure USB Legacy support is enabled in your system bios#2?Boot into save mode with device attached to the system#3 When device driver is detected but fails to install, select the device in device manager and select uninstall.#4. Unplug device from the system, then plug it back in. "According" to the note on one of the Zune forums this fixes the problem when it occurs with the Zune.
But at this point am just guessing.

How to obtain Vista Ultimate

Hello,
I recently bought a thinkpad t61. I currently have xp pro on it and want to upgrade to vista ultimate. How can i do that without the cd's? Do i have to download the thinkvantage for vista?

hi
yes you can upgrade ofcourse check out this link for more details
also check out this link
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

925XE Neo Upgrade to VISTA

Hi
I have a 925XE Neo mainboard and TD256E RX800 Graphics card and I am preparing to upgrade to Vista Ultimate. I run a pair of Sata HDDs using the Intel RAID controller as a mirrored pair.
Is there anything I need to do before insertting the Vista DVD and hoping for the best. Like upgrade to a particluar BIOS for either the mianboard or the graphics card. I read that there are problems with the RAID drivers is there something specific needed?
I see a download area for the 925X Neo but not the XE - is there any difference?
Any advice would be appreciated.
Best regards
Rob

Quote from: Slotraccoon on 11-February-07, 01:21:57
Hi
I have a 925XE Neo mainboard and TD256E RX800 Graphics card and I am preparing to upgrade to Vista Ultimate. I run a pair of Sata HDDs using the Intel RAID controller as a mirrored pair.
Is there anything I need to do before insertting the Vista DVD and hoping for the best. Like upgrade to a particluar BIOS for either the mianboard or the graphics card. I read that there are problems with the RAID drivers is there something specific needed?
I see a download area for the 925X Neo but not the XE - is there any difference?
Any advice would be appreciated.
Best regards
Rob
Hi,
You may need the Intel RAID driver on floppy or CD before install Vista. The same driver for XP can be used for Vista. You will be able to see the harddisk after installing the driver. Otherwise, the harddisk will not appear as part of the selection for Vista to install. I did a clean install rather than upgrade and this is the observation I have seen during instaling Vista on my 875P.
Regards,
MJ

Vista Ultimate x64 Loading up slowly

On my new Unibody 2.4Ghz MBP, I had 32bit Windows Vista installed for awhile. Everything was flawless and it loaded pretty quickly.
Recently I upgraded to Vista Ultimate 64bit. Bootcamp installed all the drivers and OS is working without any issues.
When it loads, right after the initial white screen, it goes to blank screen with cursor blinking at left top. It flashes for about 2 seconds then I can see it clears, but the same screen comes back but this time it stays on for about 2 mins. This seems very odd, because soon as I get the Vista progress bar, it loads OS fast in about 10 seconds.
I defragged the drive, checked for errors. I did go thrugh regular "Make Vista Boot Faster" tricks, but they seemed to make it load faster right after I get the progress bar, but did not cure the cursor issue.
Any ideas? Thanks in advance!

1) You could get Mark R.'s Sysinternals Autoruns:
http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
and see more of what is going on at startup.
2) in Run->msconfig, I disable all but bootcamp.
3) delete all *.PF files from \Windows\Prefetch. They will come back but I've found this speeded start-up.
4) You may have "Services" running that are not needed: right click My Computer icon, selecting Manage; but need to be careful disabling those critical to startup. I disable things unused: Bluetooth & Media Center etc.
5) Let Merlin check out your PC. Copy/paste following script into new text document
and rename to Merlin.vbs. Click on it to run. Works on XP, vista etc. Won't help but may make you laugh.
strAgentName = "Merlin.acs"
strAgentPath = "c:\windows\msagent\chars\" & strAgentName
Set objAgent = CreateObject("Agent.Control.1")
objAgent.Connected = TRUE
objAgent.Characters.Load strAgentName, strAgentPath
Set objCharacter = objAgent.Characters.Character(strAgentName)
objCharacter.Balloon.Style = 1
objCharacter.Show
objCharacter.Play "GetAttention"
objCharacter.Play "GetAttentionContinued"
objCharacter.Play "GetAttentionContinued"
objCharacter.Speak "Let Me Check Out Your PC For Free."
objCharacter.Play "LookDown"
objCharacter.MoveTo 600,400, 4000
objCharacter.MoveTo 300,300
objCharacter.Play "Idle3_1"
objCharacter.MoveTo 600,25, 1000
objCharacter.Play "Announce"
objCharacter.MoveTo 300,400, 0
objCharacter.Play "Search"
objCharacter.Play "Pleased"
objCharacter.Speak "Looks Great from in Here. Cheerio, And Shazaam."
objCharacter.Play "DoMagic1"
objCharacter.Play "Idle2_1"
objCharacter.Play "DoMagic2"
objCharacter.Play "Wave"
objCharacter.Hide
Do While objCharacter.Visible = TRUE
Wscript.Sleep 40
Loop

SAP B1 Client upgrade in Vista Ultimate OS

Similar Messages

Maybe you are looking for