SAP B1 Intrgration with SAP R/3 for Consolidated Balance sheet

Hi experts,
I have a crnario, where our client has SAP R/3 at their main company and want to implement SAP B1 in subsidires.
They want the consolidated reports from SAP B1 and SAP R/3 like consolidated balancesheet, trailbalance and other MIS reports .
So can any one tell me, is it possible to get consolidated balancesheets and other reports through integration.
if yes how we can do the same.
Regard's
Hari

Hi Hari,
From accounting point of view, both systems may not on the same level. Therefore, it could be very hard to Consolidated Balance sheet between them. B1 might be better fit as a data input subsystem to R/3.
Thanks,
Gordon

Similar Messages

Integrate 'External non-SAP Purchasing Application' with SAP SD for third party purchasing/ drop shipping?

What is the best way to integrate 'External non-SAP Purchasing Application' with SAP SD for third party purchasing/ drop shipping?
Details about expected process Flow.
Receive PO from customer into SAP > SAP SD creates Sales Order > ?? SAP Integrate with External non-SAP Purchasing Application to trigger purchasing > External non-SAP Purchasing Application creates PO, Ships Material to Customer Ship to address (drop ship), Sends Shipping confirmation (FCR) & Invoices to SAP> ??Receive FCR and Invoice in SAP > ?? Initiate SAP Accounts Payable (Vendor Payments) and Accounts Receivable (Customer Invoice) > ?? Update SAP SD Sales Order with shipping status>
Questions we need to answer;
- How to achieve '??' steps from above process.
- What type of Master Data we will need to configure (Say Materials Item Category, Type etc.)
- Any standards options to configure SAP SD (Type of Sales Order)
- We certainly don’t want to trigger SAP MM Purchasing (i.e. PR, PO etc.). How can we bypass it.
- How to make statistical receipts against sales order line items so that SO status will be updated.
- How to receive Invoice and FCR from External non-SAP app to trigger AP and AR transactions.
- Are there any SAP standard configurations/ BAPIs/ BADIs available to achieve this integration.
Any inputs on above questions are appreciable.
Anand.

This question is resolved. We ended up activating purchasing module and used purchasing documents PR/ PO to integrate with third party purchasing system.
Anand.

Can we create a cost element for a Balance Sheet account?

Hi folks,
Is it possible to create a cost element for a balance sheet account? If yes, what are the scenerios we would need it and how is it done?
thanks in advance

Hello
Please review the below information regarding cost elements category 90 : Financial Accounting Balance Sheet Accounts
Category 90 is automatically assigned when you create cost elements in CO whose   general ledger accounts in FI are asset reconciliation accounts
(special balance sheet accounts), not income statement accounts. You
cannot change this category in CO master data maintenance.
FI does not require CO account assignments to cost elements of
category 90. However, if you enter an account assignment, it is only
recorded statistically for real objects.
Category 90 allows you to check order or project budgets for fixed
asset procurement. To do so, enter the investment order or WBS element
in the corresponding field in the asset master. The Asset Management
component ensures that the order or element automatically appears in
the document when you access the asset procurement.
The R/3 System debits the order/WBS element statistically in the
Controlling component, which you can then monitor with availability
control.
You can treat cost elements of category 90 as activity-independent as
part of cost center planning.
Also see note 75980 for further information. From the note:
The use of cost element category 90 is only provided in the standard
system in the following two cases:
1. As of Release 3.0G, asset acquisitions and down payments which are
      assigned directly to a fixed asset or asset under construction can
      be assigned to an account on internal orders or WBS elements
      statistically. In this manner, for example, an availability check
      can be triggered on the order or the WBS element for asset posting.
2. As of Release 4.0, cost elements of category 90 can also be created
      for material stock accounts to display material make-to-order stocks
      on sales orders or customer projects.
Regards
Javier Reviriego

SAP Jam Integration With SAP Cloud For Customer

Hi Experts,
Can anyone have idea about how we can integrate the SAP JAM with SAP Cloud For Customer .
Any document or any guide please share with me.
Appreciate your help.
Many Thanks,
Mithun

Hi Srivatsava,
I am getting the error while creating the Group under the SAP Cloud Opportunity
Sales - > Opportunity -> Group Tab -> Create New Group
Kindly check the below screen for same.
can you please help me what step require to solve this issue.
Waiting for you response.
Many Thanks
Mithun

How SAP ECC interface with SAP SRM

Hi all,
I need to know how SAP ECC System interface with SAP SRM in management of Catalogs and Contracts: how can I upload, for example, Catalogs which are on SAP ECC to SAP SRM?
Thanks, best regards,
Maria

Dear Maria Bonomo,
I have gone thorugh the following link and it seems to answer your query:
www.sceis.sc.gov/content/dnld/agydir-1B.pps
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

SAP PLM link with SAP DMS

Hi, Gurus
   Please tell how we link SAP PLM C-folder & SAP DMS?
   If there is any link please for this.
   how we integrate SAP PLM -C-Folder with SAP DMS?
   if anyone know answer if give me solution.
Ravindra

Hi,
1. Create RFCs between SAP PLM and SAP DMS servers using by tcode 59.
2. Once connection established, then you can transfer tha data from PLM- cProject suits to DMS.
3. You can also transfer tha data from cProject suite to DMS or vice versa through web.
You can ask to your BASIS team.
Regards,
Srini Nookala

Compatibility between SAP ERP upgrade with SAP PI 7.3 sp12

Hi Experts,
Our SAP ERP system getting upgraded to ECC 6.0, ehp 7, SS7 and we need to check its compatibility with the current SAP PI version(7.3 sp09) and its future upgraded version which is sp12.
Would any one kindly help me to track the PI system compatibility with the ERP upgraded version and its adverse effect(if any) on interfaces between PI and ECC system?
Thanks
Navneet.

Hi Navneet
If your PI is already on 7.3, it is compatible with ECC6 EHP7. For more details refer to the SAP note that is mentioned in my reply on the thread below.
Compatibility between PI 7.11 and Ehp7 for ERP6
Rgds
Eng Swee

CAreer in SAP BASIS comaprision with SAP GRC/Security

Hi Everyone,
I am an SAP BASIS consultant with 2 years of experience working in a MNC company,
I want to change my career to SAP GRC/SAP Security, i have some basic knowledge on SAP Security,
COuld you please advice me, which one to choose,?
Does SAP GRC/Security has demand , and can we get oportunities to work abroad compared to SAP BASIS ?
which one has more scope SAP BASIS or SAP Security/GRC ?
Because in BASIS, i am not getting enough scope to work on some good things like Installation, upgrades, Migration,
i am doing a very basic kind of work like tranports, job scheduling, monitoring, and other small activities ?
So request you people to advice me ?
<removed_by_moderator>
Read the "Rules of Engagement"
regards
Rakesh Rao
Message was edited by: Juan Reyes

Hi Rakesh
I saw your post in GRC and was waiting of it to appear here
First up - 2 years is still junior. You may find batch jobs, transports, monitoring, etc all mundane but it is a foundation and learning ground work and foundations to being a good Basis Administration. And one things for sure, an awesome basic (I name my best-techy-friend) makes a huge difference on project timelines and deliverables for the rest of us.
Installation and Upgrades come with time. Whilst still performing junior tasks you could focus on reading up on approaches in case an opportunity in your job comes us and be prepared to prove to your management that you are ready for a bigger responsibility.
Switching to GRC/Security would be pointless unless you have a desire to learn GRC or Security. These are my background and they are undervalued until things go wrong (insurance policy in a way).
If you do switch you will reset your 2 years of domain experience back to 0 and you will start off with password resets and basic user administration
It takes time to work through the ranks. It was 3 years before I got to build my first role. I spent my first few years in security on email chasing approvals, password resets, user account creation, running reports for audit - sounds familiar to what you are doing now?
You have to master the basics before you are trusted and ready for the more complex activities. By knowing what you are doing now you will be more successful when the time comes to step up and do migrations, upgrades and installations. Support production by mastering you technical analysis skills is how you can break through being a fresher/junior
Regards
Colleen
Ps - if your motivation is more than "good things" happy to answer questions specific to security and GRC.
Also, boring doesn't mean it can't get interesting nor does it mean it's a worthless activity: SPAU transport imported before patching!!
Message was edited by: Colleen Lee
Added link for when transports go bad

SAP GRC AC with SAP IdM and without SAP Idm

Hello,
Could anyone provide me what are the advantages implementing SAP IdM with SAP AC suite?
Can I use SAP GRC User Provisioning tool with SAP HCM position based concept?
Thanks in advance.
-Harry

Hi ,
In GRC 10 there is no concept of web services . GRC 10 uses native SQL query for calling risk analysis which mean no need to configure web service in GRC 10
Thanks & Regards
Asheesh

Configure Sap NetWeaver MDM with Sap Netweaver XI

SAP NetWeaver MDM communicates with SAP NetWeaver XI by writing an XML file into a directory on a file server.
Can someone gives me an idea about the path of this file server? How can I configure it?

Hi Stan,
In addition to that Harrison told you,if you want automatic syndication of records ,then you must have to use syndication server.In case of syndication server the path of output file is always fixed and you cannot configure it.Path will be as follows:-
<b>
SAP MDM Root Directory\Server\Distributions\<server name> \ <Database instance name>\<Repository name>\Outbound\<client System code>\<Output Port Code> \Ready\</b>
If u want scheduled syndication of records(i.e. in batch mode) ,then u can use syndicator batch.And for manual syndication ,use syndicator .Both of these components will syndicate file where ever u want/specify on the file system.
For more details about syndicator batch
<a href="http://help.sap.com/saphelp_mdmgds55/helpdata/en/a4/21c4a4f6a247b1940fc8bf1cf41f65/frameset.htm">Click here</a>
Hope it will help you.Let me know the results.
Thanks,
<b>Shiv Prashant Dixit</b>

SAP BW - MashUp with SAP Cloud (CRM)

Hello Community,
One of our scenario requires SAP BW Mash-up with SAP Cloud - CRM with out the use of BO in-between ?
Please advise on how to achieve the same and possible pros and cons ?
Awaiting response.
Regards
Kumar .

Hello Kumar,
Please check this below links.
1) SAP Customer OnDemand How To Calling ECC Custom BSP Application Using Mashup
2) SAP Cloud For Customer How to Pass the URL with Parameters of SAP BW / BI 7 Query Report in URL Mashup
3) URL of a Web Dynpro Application (SAP Library - Web Dynpro for ABAP)
4) SAP Cloud For Customer HTML mashup URL of BW Java URL not display
Many Thanks,
Mithun

SAP Sourcing 7.0 integration with SAP ERP - issue with SAP PI

Hi All,
We are integrating SAP Sourcing 7.0 with SAP ERP 6.0 with SAP PI 7.1 in middle. So the Sourcing will talk to PI and this intern will talk to ERP. Sourcing is on oracle 11g where as PI and ERP are on SQL 2008. All these 3 are on windows 2003 x64.
We are following the "Configuration Guide Integration of SAP ERP and SAP Sourcing 7.0" provided by SAP.
We have successfully configured Sourcing and PI systems as pe the document. In Sourcing, by using background jobs we are able to successfully generate files in "export" folder which is part of FTP directory.
However the issue is with PI, we configured the "configuration scenerio" in Integration builder and point all channels to the FTP folder in Sourcing. But PI is not picking up these files.
Is there any way to trigger this in PI system. Or do we need to do anything in sourcing itself.
Regards,
Siva.

Hello Siva,
I am thinking that you may need to deploy FTP adapter in PI to get this process work fine but not sure.
Let's see what other experts suggest.
Thanks,
Siva Kumar

Integrating SAP Java Connector with SAP XI

Hi XI experts
We are about to integrate our SAP ERP2004 system with a new WMS system. The vendors of the WMS system normally integrates with ERP directly through SAP Java Connector, but we would like to put SAP XI between the two systems so we have good way of monitoring the messages beeing sent.
I would like to make a synchronous test scenario where we send a ARTMAS idoc from SAP to XI which sends it to the WMS. After WMS system receives the ARTMAS Idoc it sends an acknowledgement back to XI which passes it on to SAP.
The integration would then look like this:
SAP ERP <-> SAP XI <-> WMS (Jco)
Is this scenario possible? And if so, how would you suggest to set it up?
I was thinking of using the RFC adapter to connect to the Java Connector of WMS, but am not sure if this is the right approach or how it should be set up.
Any help or comments would be greatly appreciated.
Best Regards
Chris

I have made a setup like this:
SAP <-> XI <-> WMS
The Scenario is like this:
SAP sends an ARTMAS03 idoc to XI which maps it directly to the same ARTMAS03 idoc structure (need a few changes in the future so thats why im not using IDOC tunnelling) then it uses a RFC receiver adapter to connect to our SAP gateway, where the WMS is registrered through JCO.
When I first sent the idoc, i got a "RfcAFWException: failed to read funtionname from XML document: missing namespace declaration(2)" then after reading Q23 in note 730870, I used the RFCNormalizer xslt to change the namespace to a "urn:sap-com:document:sap:rfc:fuctions" instead of the "urn:sap-com:document:sap:idoc:messages". The error is now "functiontemplate from repository was <null>".
As far as i can see the error is because the metadata repository defined in the RFC adapter cant find the function module that normally would be in the root of a RFC-XML. But I dont know how I can send an Idoc through the rfc adapter to the gateway then. Anyone got some ideas?
Thanks
Chris

Cannot use SAP HANA Studio with SAP HANA One Instance

Hello together,
i try to make some tests in the SAP HANA environment. But i got the following error message each time:
An internal error occurred during: "Updating system 'HDB' ...".
java.lang.NullPointerException
at com.sap.ndb.studio.datamodel.manager.SAPSystemState.isThereAtLeastOneIndexserverProcessWithStateColor(SAPSystemState.java:44)
at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:76)
at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:70)
at com.sap.ndb.studio.datamodel.controler.DataModelOperationJob.run(DataModelOperationJob.java:70)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
I often read about different SAP HANA One and SAP HANA Studio versions.
Following information about the versions:
Studio: Version: 1.0.52
Hana One Instance 52.1
What could be the reason for getting this error message? I hope you can help me.
Thanks in advance.
CT

Hi Nicky,
As per my knowledge, there is no separate licensing required for HANA studio. License for HANA d/b or Enterprise HANA license is sufficient.
Installation of HANA studio will not ask for any licenses.
Regards,
Suma

Join SAP BW Query with SAP BW Table

Hello guys,
we would´need to join a SAP BW Query with information of an SAP BW Table like it is explained in the following example:
The result of the query is:
ID         Quantity    Revenue
4711    10              20
4713    20              40
4714    30              30
The table will look like this:
ID         Category
4711    A
4712    B
4713    C
4714    A
The result should be:
ID        Category    Quantity    Revenue
4711    A               10              20
4713    C               20              40
4714    A               30              30
We would like to use the current SAP Business Objects 4.0 or 3.1 environment.
Is it possible to join these data sources in the universe Designer or in Crystal reports?
Regards,
Markus

Hello Markus,
the Information Design Tool is able to create a relational Universe on top of InfoProvider which will show the tables from the cube, but the Information Design Tool in the current release is not able to show the tables from the ERP system.
regards
Ingo Hilgefort

SAP B1 Intrgration with SAP R/3 for Consolidated Balance sheet

Similar Messages

Maybe you are looking for