SAP B1 Patch Upgrade Problem

Hello,
I had SAP Business One 2005 B SP:00
PL:01
and was using
0030002C0030002C00530041005000420044005F00440061007400650076002C0050004C006F006D0056004900490056 as Command Line Argument.
But, now I've upgraded it to
SAP Business One 2005 B (7.40.252) SP:00
PL: 35 and same number
as Command Line Argument.
Now the problem is--
after running the program from .NET DE
it runs succesfully,but if I want to close the program it shows me a window with error message--
"UI AddOn Server is down--
Continue working without AddOns or Log off Current Company. " If I choose anyone of these two the program can't run until & unless I run the exe for upgrade again.
What's the problem???????
Rgds
Subrata

Please get sure you've upgraded SDK too.
please send us a little portion of code to check out the problem
I think it's when you're getting the sConnectionContext = oSboAplication.Company.GetConnectionContext(sCookie)
best regards

Similar Messages

Patch upgrade problem - Urgent

Hi,
We have upgraded the patch to 19 in our BW Production.
After doing so the users are not able to access through Portal. They are getting the error " Run-time error '91': Object variable or With block variable not set". Can anyone let me know what might be the issue or which GUI version is compatible for this particular patch.
Thanks & Regards,
Sajeed

Hi Rudi,
Our BW Production system was in Patch 10, which was upgraded to Patch 19. Then the users are getting are error.
Regards,
Sajeed

Unicode kernel upgrade problem in XI server

Hi
I'm trying to upgrade the Brtools in XI server and getting the following problem:
rx2n0v4:xdvadm 23> SAPCAR -xvf DBATL640O92_45-10002837.SAR
stderr initialized
processing archive DBATL640O92_45-10002837.SAR...
--- Unicode interface [u16_get.c line 233] pid = 6963 :
Invalid UTF-8 encountered by fgetsU16 (fileno 0x4)
fd
Characters previously read:
0043 0041 0052 0020 0032 002e 0030 0031
0052 0047 030 0031
--- Unicode interface -
End of message -
Illegal byte sequence DBATL640O92_45-10002837.SAR
Couple of times, i downloaded the kernel today and tried but get the same error. Here XI (6.40)is the unicode server and i downloaded the unicode kernel from sapnet (brtools and SAPCAR kernel). I tried with version 7.00 kernel but get the same problem.
Any solution of this problem?
Regards
Amar

Confusion About SP16 Unicode Kernel Patch/Upgrade
Problem with updating XI 3.0 (Kernel etc.)
Check this might be useful.

Problem when apply SAP Bundle Patch for 10.2.0.5

Hi,
We are trying to apply SAP Bundle Patch (SBP) SAP_102052_201102_SOL64.zip and SAP_102052_201103_SOL64.zip using MOPatch utility. Both MOPatch and OPatch utility have been updated with the latest download from SAP. When applying patch for SAP_102052_201102, most patches went through except for one patch that requires OPatch to be version 10.2.0.5.0. The OPatch version downloaded from SAP is 10.2.0.4.9. Even the OPatch delievered together in the SAP_102052_201102_SOL64.zip file is 10.2.0.4.9.
Below are extract of the opatch log file for this patch:
INFO:ApplySession applying interim patch '10248542' to OH '/oracle/DEV/102_64'
INFO:Starting to apply patch to local system at Wed Mar 23 10:49:25 SGT 2011
SEVERE:OUI-67073:ApplySession failed: ApplySession failed to prepare the system.
Patch 10248542 requires OPatch version 10.2.0.5.0.
The OPatch version being used (10.2.0.4.9) doesn't meet the minimum version required by the patch(es). Please download latest OPatch from My Oracle Support.
INFO:System intact, OPatch will not attempt to restore the system
INFO:Finishing ApplySession at Wed Mar 23 10:49:25 SGT 2011
INFO:Total time spent waiting for user-input is 0 seconds. Finish at Wed Mar 23 10:49:25 SGT 2011
INFO:Stack Description: java.lang.RuntimeException: ApplySession failed to prepare the system.
Patch 10248542 requires OPatch version 10.2.0.5.0.
The OPatch version being used (10.2.0.4.9) doesn't meet the minimum version required by the patch(es). Please download latest OPatch from My Oracle Support.
Help appreciated.
Regards,
Lim

Hi,
I went to
http://service.sap.com/oracle-download
then
Oracle 10.2.0.5
then
OPatch
The file I can see there is generic for ALL operating systems and the name is:
OPatch_10205_Generic_v0.zip
it seems that the version is 10.2.0.5, not 10.2.0.4.9 as you mentioned.
I have downladed it and look at the README:
Patch summary:
README file for OPatch 10.2.0.5.0, the Oracle Interim Patching Tool.
I'm not installing it, but it seems that the version is not the same as yours.
Is this the one you have downloaded?
Have you installed it properly? => may be you are running an older one

System Core Dumped after Oracle patch upgrade 9.2.0.6 to 9.2.0.8

Hi,
We are continously getting dumps on our BW Central instance server after we did an Oracle patch upgrade from 9.2.0.6 to 9.2.0.8.
Following is our system environment
SAP Release.............. "640"
Application server....... "abci"
Operating system......... "SunOS"
Release.................. "5.10"
Hardware type............ "sun4v"
Database server.......... "abdb"
Database type............ "ORACLE"
Database name............ "ABP"
Database owner........... "SAPABP"
SAP kernel............... "640"
Database version......... "OCI_920 "
Patch level.............. "175"
Following below is the Core Dump that is generated for any process chains that we schedule on our BW server
Runtime Errors         SYSTEM_CORE_DUMPED
Date and Time          14.04.2008 09:26:17
ShrtText
     Process terminated by signal 11.
What happened?
    The current ABAP program had to be terminated because the
    ABAP processor detected an internal system error.
    The current ABAP program "SAPMSSY2" had to be terminated because the ABAP
    processor discovered an invalid system state.
What can you do?
    Make a note of the actions and input which caused the error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
    termination messages, especially those beyond their normal deletion
    date.
Error analysis
    An SAP System process was terminated by an operating system signal.
    Possible reasons for this are:
    1. Internal SAP System error.
    2. Process was terminated externally (by the system administrator).
               Last error logged in SAP kernel
    Component............ "Taskhandler"
    Place................ "SAP-Server awci_ABP_00 on host awci (wp 5)"
    Version.............. 1
    Error code........... 11
    Error text........... "ThSigHandler: signal"
    Description.......... " "
    System call.......... " "
    Module............... "thxxhead.c"
    Line................. 9780
How to correct the error
    The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
    contains a file called 'core'.
    Save this file under another name.
    If you cannot solve the problem yourself and you wish to send
    an error message to SAP, include the following documents:
    1. A printout of the problem description (short dump)
       To obtain this, select in the current display "System->List->
       Save->Local File (unconverted)".
    2. A suitable printout of the system log
       To obtain this, call the system log through transaction SM21.
       Limit the time interval to 10 minutes before and 5 minutes
       after the short dump. In the display, then select the function
       "System->List->Save->Local File (unconverted)".
    3. If the programs are your own programs or modified SAP programs,
       supply the source code.
       To do this, select the Editor function "Further Utilities->
       Upload/Download->Download".
    4. Details regarding the conditions under which the error occurred
       or which actions and input led to the error.
Kindly help.
Regards
Sachin
Edited by: Sachin N on Apr 14, 2008 12:26 PM

No. If the environment would be wrong the system wouldn´t start up.
Core dumps are in 99 % of the cases program errors (in the SAP kernel or in an interface (libdbora*)), misaligend accesses of data etc.
If you encounter such an error have a look in the C-Stack. If you can´t see where the error is happening opening an OSS call. Most of those errors are fixed by installing the latest patches for the kernel and the database interface.
Markus

10.2.0.2 Patch Upgrade issue

hi,
SAP was installed on 10.2.0.1 (SuSe Linux Ent 10 ) . now i am applying patch upgrade to 10.2.0.2. when i am doing patch the below problem was occured,
"Unable to create new central inventory at location /oracle/orainventory. A non empty inventory already exists at this location. Please select another location or clean the inventory at /oracle/orainventory."
please help me on this issue
Regards
Ramesh

Hai,
Please check the oraInst.loc file has the correct entry or not.
File oraInst.loc should have the entries similar to the below:
inventory_loc=/oracle/SID/oraInventory
inst_group=dba
Check the permissions of this file as well, atleast the file should have read access to others.
Also check the permissions of /oracle/SID/oraInventory, it should be owned by ora<sid> user and group dba.
Regards,
Yoganand.V
Edited by: Yoganand Vedagiri on Feb 23, 2009 12:05 PM

KERNEL upgrade problem.

Dear Experts,
Very imp issue. please find time to read and gothrough this.
recently i had updated KERNEL for ECC 6.0 SR2.
after updaing the kerenl files, i'm not able to see the updated patch level
in system status.
Same old patch level is displayed.
1 *what could be the problem?
D:\usr\sap\DEV\SYS\exe\uc\NTAMD64
this is the path, first i had pasted (copy new and paste in tht kerenl Dir).
it had asked for u want to replace (while pasting) i clicked Yes to all.
so, it got replaced with new extracted files.
and when i started the MMC SAP is not starting UP.
then when i had serached in USR dir, i found another Dir with kerenl fiels for
01 instance (java instance defaultly loaded in ECC 6.0 SR2).
so, i had replaced kerenl files , simply by pasting in to this second path.
D:\usr\sap\DEV\SCS01\exe
then i had started SAP MMC, after a few min it was started and i'm able to log in
to SAP.
But, the problem is I'm not able to see the Upgraded value in System status.
What could be the problem ?
2 *where to check ?
I request you people to give your valuable inputs for
3 *procedure to be follwed in upgrading SAP KERNEL?
4 *what kind of fiels to be downloaded from market place?
i.e Kernel part 1 , kerenl part 2 and other kerenl components in both places
where you can download those kerenl parts.
5 *if any problem occurs in kerenl upgrading how to revert back ?
6 *what kind of precautions to be taken before updating Kerenl ?
7 *system restart is mandatory or not ?
if any extra points to be discussed please let me know that.
Thanking you all in anticipation.
Best regards,
by
Raghav.

Hi,
did you stop and restart the system for changing the kernel ?
You can find latest kernel from http://service.sap.com/swdc
Choose your platform and product combination. More detailed info can be found in OSS note: 19466
http://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=0000019466&nlang=E
and you need to stop SAP before you can change the kernel and after kernel upgrade you restart the system.
For a backup purpose, before changing the kernel. please make a copy of your old kernel directory...
Cheers !!
Satya.
PS: pls reward points if the answer was helpful...Thx.

Backup error after kernel patch upgrade

Hi.
I have a backup problem after the kernel patch upgrade. I have SAP R3 4.6C on HPUX11.0 with an Oracle 8.17 database.
I have upgraded kernel patch from 1655 to 2337.
Afterward, I am getting following backup error:
BR280I Time stamp 2007-11-06 09.29.01
BR279E Return code from '/usr/sap/HAD/SYS/exe/run/backint -u HAD -f backup -i /oracle/HAD/sapbackup/.bdwnpztp.lst -t file_online -c': 2
BR232E 0 of 115 files saved by backup utility
BR280I Time stamp 2007-11-06 09.29.01
BR231E Backup utility call failed
Does anyone know how to correct this?
Thank you.

Hi Jun,
backint is a link file that is in SAP kernel directory which links to the backup client on the server.
eg:
lrwxrwxrwx 1 root other 32 Aug 13 2004 backint -> /usr/openv/netbackup/bin/backint
As part of kernel upgrade process, the kernel is backed up, mostly on the disk before upgrading. Check if this link exists and recreate it in the kernel directory, if no backup was done, compare it with other systems to get the details of the backint link.
Cheers,
Nisch

Patch Upgrade - Urgent

Hi Friends
We are upgrading patches on our bw machines.We are on patch level 19.Now moving to 21.
I just want to know what kind of testing do we need to do after patch upgrade?
Please give me some thoughts with this regards.
Regards,
Chama.

Hi,
it is recommended that to use latest kernel patch and database patch if available,
you need to perform this operation on first Development system than to QAS and PRD
after applying such patch you need to check that sap server is start without problem, check for database,
such tranasaction is tested by other people like functional/end user may run there tcodes and test it
regards,
kausahl

Patch Upgrade Process...

Hi All,
I have never done the patch upgrade for portal, so want to know the exact procedure.
We are using EP 7.00 SP9.
Actually we are facing issues in IE 7.0, so I want to upgrade my portal's patch to SP15 or more (as per SAPu2019s note 981710).
1. Please tell me whether IE 7.0 will suit the portal 7.00 SP15 or not?
2. Please give me the Procedure or Pdf or Guide for Patch upgrade.
Thanks,
Nikesh Shah

hi Nikesh Shah,
i have faced the same problem, but i have solved by the following procedure
while download the support package stack from SAP service market place,
you have to select the save as file then it will display two links one is right click to save this table as a CSV file and another is right click to save this table as a XML file, then right click on XML and choose save target as default name is SPSTab and save this file and copy this file into ..../usr/sap/trans/EPS/in and start the JSPM and then check.
note: the JSPM automatically first upgrade jspm and return to the JSPM screen, with the status message JSPM deployed, and the remaining components with the status message NOT AT DEPLOYED, now again continue the JSPM to deployee the remaining components, in this list next JSPM pickup the kernel and then remaining components to upgrade the system.
i hope your problem may resolve.
Thanks
Bharathi ch.
Edited by: Bharathi Ch on Aug 5, 2009 12:05 PM
Edited by: Bharathi Ch on Aug 5, 2009 12:09 PM

Repository connect issue after MDM Patch Upgrade

MDM Expert
We recently upgraded our MDM patch from SP06 5.5.63.73 to SP06 5.5.65.91
after patch upgrade we are not able to connect to repository.SAP is saying that we have wong NLS Character set.It should be 'UTF8' or 'AL32UTF8'
We checked and found that we do not have character set as per SAP Recommendation but everything was working fine before upgrading the patch.As per SAP in new Patch MDM is lokking for Unicode Character set
SAP is asking to create new DB Instance for MDM.
If we create new instance for MDM then how we are going to use our existing repository.Our environment is clustered environment and name of MDM DB instance is also mentioned in cluster.We have to use same Instance name.We are also using oracle failsafe
Creating new instance seems to be risky for Production environment.Currently we are applying the Patch in Sandbox Environment
has anyone of you faced this problem while upgrading MDM patch, if yes then how you resolve the issue
Please help
Thanks
Deelip

Solution provided by sAP

Kernel Patch upgrade results into error

Recently, we upgraded our R/3 640 kernel from patch number 196 to 327. It went successful.
But now, the Sales and order team is having problem in saving the orders(VA02, VA01).
While saving Sales order, error pops up saying "dialog step number missing".
Kindly suggest.

Hi ppl,
The problem has been resolved.
As i said, problem wasnt with the upgrade, but came thereafter, functional team faced issues while switching between the windows.
Problem was with the Gui level, it needed to be upgraded too after the kernel patch upgrade.
Thanks a lot for putting your thoughts.
Thanks

MOPatch bpmig.sh Structural Changes in SAP Bundle Patches

Structural Changes in SAP Bundle Patches New!
As of June 2014, there is a change in the internal structure of the SAP Bundle Patches (SBPs) for Oracle. While this has many benefits, applying the new SBP for the first time requires special handling. For more information, see the hot news SAP Note 2011199.
When looking at note 2011199 I found due to the changed structure and to identify stand alone patches it is recommended to run the bpmig.sh script.
To avoid these problems or to detect them before actually installing this SBP, you must run the bundle patch migration script bpmig which is delivered with MOPatch 2.1.16 and later.
The script comes up with an error message:
Cannot determine SBP version from "SAP Bundle Patch 11.2.0.3.2 - 201205".
opatch / mopatch semselfs seems to function properly...
Any clues?

Hi,
Please check the following SAP Note 2032109 - Executing bpmig.sh shows "Cannot determine installed SBP"
Thanks.
http://service.sap.com/sap/support/notes/2032109

How to do patch upgradation in citrix server ?

Dear all,
How to do patch upgradation in citrix server (SAP B1 2005B PL41 to PL49) ?
Whether i also need to do same in db server ?
Jeyakanthan

Hi Jayakanthan,
Patch Upgrade is done on SAP Server only.After Completion of Patch 49 upgrade in SAP Server
then open SAP B1 in server machine it start to upgrade DB after completed DB Upgrade
In Citrix Server open the SAP B1 it start the upgrade process after completed
restart the citrix server.
There is no separate Patch instalation in citrix server.
in Citrix server SAP client only installed so you can just open the
SAP B1 in citrix server and other client machine also it automatically start to
upgrade.
*Close the thread if issue solved.
Regards
Jambulingam.P

Best Practice: SAPGUI Version and Patch Upgrades

Hello -
Does anyone have some thoughts/information on best practices relating to SAPGUI version and patch upgrades.
Obviously, sometimes upgrades are forced upon us (e.g. 7.10 for Vista) and in other cases it may just be considered "nice to have".
Either way - it always signifies regression test and deployment effort. How do we balance the benefit and cost?
Thanks, Steve

Hi Steve,
you're right for the first part, yes, we (usually) patch twice a year.
Now for the rest
An uninstall will only happen on release changes (6.20->6.40->7.10), i. e. about every 4-5 years as SAP releases them.
Patches are applied to the installation server and the setup on the client will only update changed program parts. For example, upgrading 6.40->7.10 took about 10 minutes (incl. uninstall), applying patch 1 less than 5 minutes.
I recommend, you read the "SAP Frontend Installation Guide - 7.10" which you find at SMP alias sapgui. Navigate to Media Library - Literature. It explains setup of the installation server (sounds like a big thing, but ain't much more than creating a share), creating packages, applying updates etc.
Peter
Points always appreciated

SAP B1 Patch Upgrade Problem

Similar Messages

Maybe you are looking for