SAP - B1 Reporting with PLD Currency

Dear experts,
I´d like to avoid the currency in the fields. E.g. colsum(F_128) is always "123.1200 EUR".
I want it so: "123.1200"
Thanks in advance.
bye
Volker

Dear Volker,
To get rid of the currency in PLD, you can add a formula as follows:
In your example, instead of ColSum("F_128"), use Amount(ColSum("F_128")). This will show only the amount part of the value.
I hope this helps.
Regards,
Nat

Similar Messages

Invoice report with different currencies

Dear friends,
I need a report for invoices. I want to choose currency from selection screen. And report will calculate invoice amount with this currency. Does SAP have a standard report for this?
How can I see invoice list with different currency?
Thanks

Thanks for your interest. But I am looking for invoce report. For example I have 3 PO
PO number      Currency      Amount
121100                EUR             100
121101                TRY              200
121102                USD              300
I want to see a invoice list like below
Selection screen :
Report Currency : USD
When I execute I want to see report like
PO number      D.Currency      Amount          Report Currency (I choose USD and amount will exchange to USD)
121100                EUR             100                       68
121101                TRY              200                      150
121102                USD              300                      300
Is it possible?

Report with Transaction currencies

Hi All.
i am in the process of developing a report in project systems with my developer.
The scanerio is investment projects (all internal projects) . Exchange rate type P is defined and is uploaded one in an year.
We have been using budgets in different currencies. So, a project is budgeted in 3-4 curriencies at differenct WBS levels and is posted with many currencies. As of now its working fine ...........................now the requirement of the client is , he need a report in transaction currencies.
So, a WBS many be budgeted in one currency, but might be posted in different currencies. So for one WBS, we might have 4-5 currencies existing. Now a report need to be developed.
Is this possible? any suggestions from your end?

Hi Surya,
You need to explain your client the transaction curr report will be meaningless when time comes to give a total for the columns. They need to go with either object or controlling area currency to make some sense out of these figures.
I hope it helps,
Regards,
Dave

Profit center report with old currency exchange rate

Dear All,
I have a requirement in PCA reporting. We have maintained exchange rate as 1.86 Egyptian pound to 1 Saudi Rriyal from 01.01.2001 to 31.03.2014. Also, from 01.04.2014 onwards the exchange rate is 1.90 EGP to 1 SAR. When we run PCC report on 05.04.2014 it is picking that day rate as 1.90 and showing the same in PCA report.
But now, my client wants the exchange rate to be calculated with old price 1.86 in the report. Is there any way to pick old exchange rate in PCA reporting?
BR, Srinivas Salpala

Hi Srinu
RPC0 applies to CC reports and not PCA reports
I am surprised by your statement that Summary reports derive values based on Current Fx rate
GLPCA and GLPCT are the tables that are used in line item and Summary reports.. check the value in GLPCT and do they match with GLPCA or not
I am still not convinced about your issue.. Why do you need currency conversion in report?
Assume your comp code curr is USD and Cont Area curr is EUR.. You will be able to see all reports in both currencies without any conversion required during report execution. This is because all the transactions are recorded in these two currencies
Ensure that the All Currencies indicator is turned ON for your contr area
Br. Ajay M

Connecting SAP Crystal Report with EHP6 FOR SAP ERP 6.0

Hello Everyone!
I have downloaded SAP Crystal Report demo 30 days and we have an IDES for "EHP6 FOR SAP ERP 6.0", how can I make some reports and train myself with crystal report?
I don't understand how to make the connection to our SAP DB, can you help me?
Thank you!
Denis

Ok solved.
- I assure where is the saplogon.ini (in my case: %appdata%\SAP\Common\saplogon.ini)
- I open the saplogon.ini with notepad and set the UTF format and than save it replacing the original one if it was not in UTF format
- I go to : control panel>system>advanced>environment variables>system variables and I create a new one with name "SAPLOGON_INI_FILE" and path "C:\Users\....\AppData\Roaming\SAP\Common\saplogon.ini";
- Open SAP Crystal Reports 2013 (in my case) > VIEW > Preferred Viewing Locale > (here I set the language of the SAP System I am going to log on with crystal report, in my case was in english so I set English)
- (within SAP Crystal Reports 2013) > FILE > Log On or Off Server... > Create New Connection > SAP Table, Cluster, or Function > (now it shows me all the different SAP Systems that are also in the SAP GUI Logon, choose one, set the client-username-password and then finish)
Thank you,
Closed.

Connecting SAP standard report with Crystal report

Hi all,
I've a SAP standard report S_ALR_87012284 using which I need to develop a dashboard using Xcelsius but before that I need
to build that report in Crystal reports.
Now is there any way to connect directly to SAP standard report from Crystal report ??
Thanks
John

Hi John
I am not sure about the link to a standard Report. I don't think it is possible, As far as I can work out the closest you will get to what you want in CR2008 is a link to Data Clusters, Data Dictionary and Function Modules CR. Perhaps someone with more experience than me can offer more insight though.
If your goal is to utilize CR2008 just for the ability to link to Xcelcius you should check out the following site, as it may help you approach your goal differently. This shows a great method for linking directly from Xcelcius to SAP.
http://enterprisegeeks.com/blog/2009/02/18/abap-freak-show-february-18-2009/
regards
Phillip

Transport of sap queries report with variants

We created an ABAP Query report (it is system generated report). We created Z transactions to which we attached generated report. We added Z transaction, User group & infoset in transport & transported same to quality system.
For some transactions report is transported for some it is not. why so?
Also we created variants for these transactions & mentioned same while creating transaction. These variants are also not transported. I checked that these programs are generated by system as local obj. & when i tried to add variants in transport request using program RSTRANSP system gave me message that cant add variants for local objects.
Can you please let us know how can we transport Transactions created by ABAP query report with variants?

Hi
To use the variants in the other systems, you have to create System Variants. While creating a variant provide the name of the variant starting with CUS& and include the same in request number.
For transporting the Query, User group and Info set use the Query Transport tool program - RSAQR3TR
~~~Ganesh Kumar K.

How to report with local and global currency in Deliveries?

Dear all,
i am working on a delivery scenario where i have in the datasource NETWR(Net value
), WAERK (Document currency).
I would like to be able to report with local currency and global currency.
Could you please help by explaining how to proceed?
Thank you.
Cheers

Hi Gilo,
You have to check with the business on the following.
1) What would be the key date of currency conversion? Is this any document date from the transaction ( Delivery Date ) or report execution date?
2) What would be the target currency ? ( for local and Global currency ). Whether this can be determined at the time of loading or should it be based on user selection criteria?
3) What is the exchange rate type that has to be used? ( for example 'M' ).
Once you have the answers to these questions, you can decide whether to do the currency conversion in the backend or front end in the report during runtime.
For example, if the user wants to input the target currency on selection variable and wants to use the exchage rate as of the report execution date, then this currency onversion has to be done at runtime.
For more details,Please check help.sap.com or SDN
Thanks,
Krishnan

Any Orjinal SAP Reports which has currency field and currency key

Hi Friends,
I am looking for a report which has currency field and currency key at selection screen. I want to learn how SAP do selection with currency. Can you say a transaction deal with my desire?
Thanks.

try report RFSSLD00
A.

Balances of sevaral profit centers with various currencies in same report?

Experts,
Is there any report where we can see Profit Center wise and Currency Wise balances as of any mid period (Say Fortnightly) but in the same report?
i.e; Balances of sevaral profit centers with various currencies in the same report.
- Nilesh

Nilesh,
You can refer to drill down reports in Profit center accounting :-
http://help.sap.com/saphelp_46c/helpdata/en/cc/36428094f311d2b47a006094b9b0a5/content.htm
Thanks
Nishan D

Is possible to see group currency data in SAP provide report or query ?

Dear experts:
Is possible to see group currency data in SAP provide report or query for Assets. When the Depreciation area currency is different with the group currency?
My SAP version is ECC 6.0.
Depreciation area currency: USD,
Company code currency: USD,
Second local currency: Group currency(TWD)

You must have defined an additional dep area for group valuation too.
then only you can get the asset values in TWD curency.

Need SAP BW AR Aging Report with R/3 Aging Report Should Match

Hello All,
Could you please let me know SAP Delivered AR Aging Report on BW Side should match with SAP R/3 AR Aging Report for a given Customer.
When I ran the report on BW Side I am able to match the report values with InfoProvider Values and also with RSA3 Extractor (0FI_AR_4).
But when i tried to compare BW report with ECC Report values are not Matching at a given Customer Number.
Please explain the best practice to match the values of BW Standard Aging report with ECC standard AR aging report.
Thanks,
Geetha

Hi,
I am actually running the SAP Delivered Report in BW.
So I didn't changed any thing in report.
I m running the report in ECC using s_alr_87016128 tcode.
Still I m getting the amount difference.
I have checked at customer level with company code and Key date.
Can i get inputs on these.
ECC Report s_alr_87012168
BW Report:0FIAR_C03_Q0005
Thanks,
Geetha

Execution of Reports phase error during SAP EHP4 upgrade with EHPi

I started getting an error message in the "Execution of reports after put" phase
(within the Downtime phase) during the SAP EHP4 upgrade with Enhancement
Package Installer.
***** LIST OF ERRORS
AND RETURN CODES *****
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPRB70104.OPQ
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1AETR012XProgram terminated (job: "RDDEXECL", no.: "09064300") Long
text: Cause Program "&V#&", which was started in the background, was
terminated abnormally. System Response The system created a job log for
the terminated program. What to do Proceed as follows: Log onto the
system in which the program was executed. The system is specified at the
beginning of the transport log. Then call transaction SM37 to display the
job log. Enter "&V#&" as job name and "DDIC" as user name. Restrict the
starting date to the starting date specified in the transport log. For
the other selection criteria, select only jobs with the status
"cancelled". Then press <LS>Execute</>. A list of the jobs satisfying the
selection criteria is displayed. You can display the log by pressing
<LS>Job log</>. If the list contains several jobs, you can select the job
with the ID " &V#&" with <LS>Display</> -> <LS>Job details</> or define
further details for the selection criteria in the initial screen of
transaction SM37. If the ABAP processor reports cancellation,
double-clicking on the corresponding message in the job log branches to
the display of the corresponding short dump. 1AEPU320 See job
log"RDDEXECL""09064300""OPQ" 1 ETP111 exit code : "12" >>> PLEASE READTHE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<< XPRAs are
application reports that run at the end of an upgrade.
Most XPRA reportshave a report documentation that explains what the report does and how
errors can be corrected. Call transaction se38 in the SAP system, enter
the report name, select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above
<<<
I tried to follow the instructions in note 1269960, but the enhancement spot
CLASSIFICATION_TOOL was already active. I activated it again and reran the phase
but got the same error. Also, I couldn't implement the note using SNOTE because it is
the middle of the upgrade process.
I also found the following long text in ST22
"Internal error during syntax check: ("//bas/710_REL/src/krn/gen/scsymb.c#11"
Processing had to be terminated because an internal error
occurred when generating the ABAP/4 program
"CL_CLS_BADI_CHARACTERIZATION==CP".
The internal system error cannot be fixed by ABAP means only."
I am on a 64 bit System with CentOS Linux. 8 GB RAM, 250 GB HD with 20 GB free space.
So far, I could not find any information on this. Any help would be greatly appreciated!
Thanks,
Victor

Hi Victor,
Go to SM37 and put in the username as DDIC and see the job log.
Also check Sm50 and see whether you have BTC processes available.
Last but not the least check your filesystem space usage too.
Gerard

Issue with SAP BW Report Iview

Hi,
The issue stands with the context menu(right click menu)
I have created a BI Query and generated a BW Report with the Web Designer Wizard.
When I run the generated URL it is working fine, with the context menu also working perfectly.
However when I use that report in SAP BW Report Iview, the report gets opened perfectly but the context menu is taking me to a new page with those options.
As of now i do not know of any setting for context menu specially.
If anyone can help me or if anyone has encountered this error before, pl. let me know the solution.

Atul -- i am running into simillar issue. Please let me know if you found a solution for this.
Hi all -
When i create a BW Report iView 7.x in EP 6.0, the second level context menu doesn't appear for the template. Please let me know if this can be fixed.
Thanks
PR

Is SAP BI reporting is possible in ECC 6.0 with same client

Hi all,
                         My requirement is, we need to design SAP BI data flow in ECC 6.0 with same client only. Now I am designing the BI data models as per the requirement of SD sales reports in ECC 6.0.For this, when i was extracting the data from SD datasource(2lis_11_vahdr) in RSA3 its showing 0 records,actually as per VA01 some records are available but its not showing in the RSA3.
                          My doubt is , is it possible to extract the data from ECC 6.0 and load the data to the datatargets and get the SAP BI reports in ECC6.0 with the same client.
                          Please suggest as soon as possible.
Thanks

It is possible to load the data from the same client. It all depends on the source system and the client which has been connected in the RFC connection.
Let me know if this helps.
Regards,
Avinash

SAP - B1 Reporting with PLD Currency

Similar Messages

Maybe you are looking for