SAP B1 speed Problem at startup

Hi!
I have some problems, connecting from Workstation to SAP B1 DB and Licence Server.
It takes very long to open, any ideas what could be wrong?
The Welcome Screen with logon information remains for aprox. 3 min, until it loads the application. Maybe thats a helpful information for insiders...
Until the wohl Application loads, it takes 5-7 min. this is not usual isn't it?

Connecting to License server manager on server takes very long too, after disabled first nic.
So maybe its a Problem with license server, who got bind on first nic?
I consider two Options
a) disable first nic from system manager, so the nic doesn't appear anymore.. but does this solve my problem?
b) reinstall licence Manager on server, with disabled first nic.
On both cases.. how does sap b1 install key behave? Does it get the install code from first nic? So if there isn't one it wonu2019t accept my existing licence key?
Getting a new one shouldnu2019t be a problem.. but does B1 block all access until it gets new key? or switches to 30 day mode or something like that?

Similar Messages

Problem during startup of NWDS - Error while opening NWDS -

Hi,
iam unable to start up NWDS.problem during startup of NWDS
Error when double click the NWDS to open.
Error in .log file of workshop[--
!SESSION -
!ENTRY org.eclipse.core.launcher 4 0 Dec 03, 2007 15:59:04.226
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
     at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
     at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: java.lang.reflect.InvocationTargetException
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:861)
     at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
     ... 7 more
Caused by: org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NullPointerException)
     at org.eclipse.swt.SWT.error(SWT.java:2330)
     at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:101)
     at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:1999)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1733)
     at org.eclipse.swt.widgets.Display.release(Display.java:1782)
     at org.eclipse.swt.graphics.Device.dispose(Device.java:212)
     at org.eclipse.ui.internal.Workbench.run(Workbench.java:1390)
     at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
     at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
     ... 8 more

Hi nayab,
                 Ur workspace metadata seems to be corrupted. Go to ur workspace. rename .metadata folder & open the NWDS. It will not show ur previous configuration so u have to import the Development configuration again. In case ur any activity is open, it will come back when u import the Development Configuration.
regards
Sumit

Problem in startup of Shadow Instance (START_SHDI_FIRST)

Hi Experts
I am having problem in 4.6B - ERP6.0 Upgrade. I have problem in startup of Shadow Instance. Here is log description.
DEVTRACE.LOG
trc file: "dev_ms", trc level: 1, release: "700"
Thr 01 Fri Feb 22 19:53:01 2008
Thr 01 MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 133
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 7614
Thr 01 ***LOG Q01=> MsSInit, MSStart (Msg Server 1 7614) http://msxxserv_mt. 1824
Thr 01 SigISetDefaultAction : default handling for signal 18
Thr 01 load acl file = /usr/sap/put/<SID>/SYS/global/ms_acl_info
Thr 01 MsGetOwnIpAddr: my host addresses are :
Thr 01 1 : http://192.168.21.21 <hostname> (HOSTNAME)
Thr 01 2 : http://127.0.0.1 localhost (LOCALHOST)
Thr 01 MsHttpInit: full qualified hostname = <hostname>
Thr 01 HTTP logging is switch off
Thr 01 ms/icf_info_server : deleted
Thr 01 *** I listen to port sapmsSHD<SID> (3602) ***
Thr 01 CUSTOMER KEY: >L0506167855
trc file: "dev_rd", trc level: 1, release: "700"
Fri Feb 22 15:25:15 2008
***LOG S00=> GwInitReader, gateway started ( 1059) http://gwxxrd.c 1691
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 133
intno 20050900
make: single threaded, ASCII, 64 bit, optimized
pid 1059
gateway runs with dp version 232(ext=109) (@(#) DPLIB-INT-VERSION-232)
gateway (version=700.2007.10.01)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
Bind service sapgw02 (socket) to port 3302
GwPrintMyHostAddr: my host addresses are :
1 : http://192.168.21.21 <hostname> (HOSTNAME)
2 : http://127.0.0.1 localhost (LOCALHOST)
Full qualified hostname =
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
Fri Feb 22 15:25:20 2008
DpShMCreate: sizeof(wp_adm) 70080 (960)
DpShMCreate: sizeof(tm_adm) 51017496 (25496)
DpShMCreate: sizeof(wp_ca_adm) 184800 (88)
DpShMCreate: sizeof(appc_ca_adm) 8800 (88)
DpCommTableSize: max/headSize/ftSize/tableSize=2000/8/2192040/2192048
DpShMCreate: sizeof(comm_adm) 2192048 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1840)
DpShMCreate: sizeof(wall_adm) (224040/346312/80/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: ffffffff5bc00000, size: 54051296)
DpShMCreate: allocated sys_adm at ffffffff5bc00000
DpShMCreate: allocated wp_adm at ffffffff5bc01cc0
DpShMCreate: allocated tm_adm_list at ffffffff5bc12e80
DpShMCreate: allocated tm_adm at ffffffff5bc12ee0
DpShMCreate: allocated appc_ca_adm at ffffffff5ece77d8
DpShMCreate: allocated comm_adm at ffffffff5ece9a38
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at ffffffff5ef00ce8
DpShMCreate: allocated gw_adm at ffffffff5ef00d68
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at ffffffff5ef00d98
MtxInit: -2 0 0
Fri Feb 22 15:25:26 2008
GwDpInit: attached to gw_adm at ffffffff5ef00d68
Fri Feb 22 15:25:44 2008
caught SIGINT (2)
***LOG S30=> GwStopGateway, gateway stopped () http://gwxxrd.c 14586
STARTSFI.LOG
1 ETQ201XEntering upgrade-phase "START_SHDI_FIRST" ("20080222195300")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
4 ETQ399 Set environment for shadow connect:
4 ETQ399 ENV: dbs_ora_schema=SAPR3
4 ETQ399 ENV: auth_shadow_upgrade=1
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '02', GwService = 'sapgw02'
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SW<SID>H"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2 ETQ353 Starting system
4 ETQ399 ext. env.: DIR_LIBRARY=/usr/sap/put/<SID>/homeshd/<SID>
4 ETQ399 ext. env.: LD_LIBRARY_PATH=/usr/sap/put/<SID>/homeshd/<SID>:/usr/j2se/jre/lib/sparc/c
lient:/usr/j2se/jre/lib/sparc:/usr/j2se/jre/../lib/sparc:/oracle/<SID>/102_64/lib:/usr/sap/I
TC/SYS/exe/run:/oracle/client/10x_64/instantclient
4 ETQ399 2008/02/22 19:53:00: put_execute: (startsap) forkpid:7500
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2 ETQ231 RFC Login failed
4 ETQ359 RFC Login to: System="<SID>", Nr="02", GwHost="<hostname>", GwService="sapgw02"
2 ETQ231 RFC Login failed
2WETQ372 test RFC failed, rc="-2"
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
2EETQ399 Dialogue: ERROR
2EETQ399 Starting system failed, rc=0
Please let me know if you have any ideas.
Thanks & best Regards
L Raghunahth

Hi ,
I am forwarding the dev_w0 log.
dev_w0 ==> log is as follows
M Fri Feb 22 15:25:26 2008
M ab_init o.k.
M ThrInitGlobals o.k.
M ThrCreateShObjects           allocated 150834 bytes at ffffffff52200000
M SosRegisterMemAddr: add mem addr ffffffff52200000 / >thr_serv_info<
M SosRegisterMemAddr: add mem addr ffffffff52200010 / >thr_wpadm<
M ThrCreateShObjects o.k.
M SosRegisterMemAddr: add mem addr 1050aace0 / >ztta<
M SosRegisterMemAddr: alloc/realloc table
M SosRegisterMemAddr: add mem addr 105328a60 / >spa<
M ThrRegisterMemAddrs o.k.
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtRegJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtRegWpWriterJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtHttpRegWpJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtHttpRegUsrJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtHttpRegMemJavaNatives failed (-1)
M ThJRegNatives3: java not active
M ThrInitRunTime: ThrtHttpRegSysJavaNatives failed (-1)
M ThrInitRunTime o.k.
M ab_startup o.k.
N SsfSapSecin: putenv(SECUDIR=/usr/sap/put/<SID>/DVEBMGS02/sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/put/exe/libsapsecu.so .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
M load shared library (/usr/sap/put/exe/libsapsecu.so), hdl 1
N ===...sucessfully completed.
N =================================================
M
M Returncode of AlMCCreateAttach (): 50
M Returncode of AlMOCreateAttach (): 50
M Returncode of AlSmesCreateAttach (): 50
M *** Start of API function likey_init ***
M likey_init: sid = "<SID>"
M likeymem_calloc (2, 21) for type "List of the SW products" returns 1050a55e0.
M likey_init: products [0] = "R3_ORA              "
M likey_init: products [1] = "R3_BASIS            "
M likey_init: basis_release = "700"
M likey_init: temporary license keys allowed.
M likey_init: running within the SAP WebAS ABAP.
M Generated absolute filename of the verify PSE: "/usr/sap/put/<SID>/DVEBMGS02/sec/LASVerif
y.pse"
M PSE name "/usr/sap/put/<SID>/DVEBMGS02/sec/LASVerify.pse" memorized.
M The contents of the PSE file "/usr/sap/put/<SID>/DVEBMGS02/sec/LASVerify.pse" is the 2038
version.
M SAPSECULIB initialized by calling SsfLibGetToolkit ().
M likeyper_init: insert_record memorized.
M likeyper_init: update_record memorized.
M likeyper_init: delete_record memorized.
M likeyper_init: get_record memorized.
M likeyper_init: get_all_records memorized.
M likeyper_init: cleanup memorized.
M likeyche_get_existing_buffer: buffer found in EG memory.
M likeyche_get_existing_buffer: magic number okay, reserved entries = 5, used entries = 0
M *** End of API function likey_init ***
M SAPlicense: LIKEY initialisation done
M ThBtcClnZombies o.k.
M Enq-Reset-Registration o.k.
M SosRegisterHook: add hook >rsts_storage_free(101a2ee78)< for event AFTER_STORAGE_FREE
M SosRegisterHook: add hook >rsts_before_commit(101a2efb0)< for event BEFORE_COMMIT
M SosRegisterHook: add hook >rsts_after_commit(101a2f098)< for event AFTER_COMMIT
M SosRegisterHook: add hook >rsts_after_rollback(101a2f168)< for event AFTER_ROLLBACK
M SosRegisterHook: add hook >rsts_after_rollback(101a2f168)< for event AFTER_ROLLBACK_WOR
K
M SosRegisterHook: add hook >rsts_after_rollin(101a2acd0)< for event AFTER_ROLL_IN
M SosRegisterHook: add hook >rsts_before_rollout(101a2acec)< for event BEFORE_ROLL_OUT
M DpISetTrcLog: trc logging active, max size = 20971520 bytes
M DpISetTrcLog: sw<SID>h off trace logging global is off
M DpISetTrcLog: trc logging active, max size = 20971520 bytes
M ThSetTrcLogParam2 o.k.
M register db commit/rollback hook o.k.
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M MskiInitLogonTicketCacheHandle o.k.
M ThrtRegisterJCoNatives o.k.
M JrfcVmcRegisterNativesDriver o.k.
M ThJRegNatives3: java not active
M EnqVmcRegisterNatives failed
M ThJRegNatives3: java not active
M JMonVmcRegisterNatives failed
M ThJRegNatives3: java not active
M JTSAuthorityRegisterNatives failed
W =================================================
W === ipl_Init() called
W    ITSP ICMAN is not active: Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
M ipl_Init returns 2 ITSPE_DISABLED: Service is disabled (sapparam)
M SosRegisterHook: add hook >DbgBeforeSessionEnd(100495c64)< for event BEFORE_SESSION_END
M SosRegisterHook: add hook >DbgBeforeTaskSw<SID>h(10049575c)< for event BEFORE_TASK_SW<SID>H
M ThDbgInit returns 0
M ThJRegNatives3: java not active
M ThDSysEnv: delete environment
M REL WP ca_blk 56
M ThDtWpBlk: detach WP ca_blk 56
M REL APPC ca_blk 2
M ThDtAppcBlk: detach APPC ca_blk 2
M ThIEmFree: delete hyper context (hyperHdl=fffffffdd99f1e60)
M ThIEmFree: call EmContextDelete (em_hdl=0)
M set act fields to T-1/M255
M ThSetProcessPriority o.k.
M SosRegisterMemAddr: add mem addr ffffffff57412e80 / >tm_adm_list<
M SosRegisterMemAddr: add mem addr ffffffff57412ee0 / >tm_adm<
M SosRegisterMemAddr: add mem addr ffffffff57401cc0 / >wp_adm<
M SosRegisterMemAddr: add mem addr ffffffff53000000 / >wp_ca<
M SosRegisterMemAddr: add mem addr ffffffff5a4ba5f8 / >wp_ca_adm<
M SosRegisterMemAddr: add mem addr ffffffff5a4e9a38 / >comm_adm<
M SosRegisterMemAddr: add mem addr ffffffff5702edc0 / >appc_ca<
M SosRegisterMemAddr: add mem addr ffffffff5a4e77d8 / >appc_ca_adm<
M SosRegisterMemAddr: add mem addr 0 / >vmc_adm<
M SosRegisterMemAddr: alloc/realloc table
M SosRegisterMemAddr: add mem addr ffffffff57400000 / >sys_adm<
M ThCheckComOrRb (event=1, full_commit=0)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M ThCheckComOrRb (event=3, full_commit=0)
M ThCallHooks: call hook >dyKeyTableReset< for event AFTER_COMMIT
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M SosCheckAbapEnv: invalid tid/mode T-1/M255
M db_commit98 (keep resources) o.k.
M SigSave o.k.
M rdisp/rfc_use_quotas : 1
M rdisp/rfc_max_queue : 5
M rdisp/rfc_max_login : 90
M rdisp/rfc_max_own_login : 25
M rdisp/rfc_min_wait_dia_wp : 1
M rdisp/rfc_max_own_used_wp : 75
M rdisp/rfc_max_comm_entries : 90
M rdisp/rfc_max_wait_time : 15
E Fri Feb 22 15:25:29 2008
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M init lock table o.k.
M ThrSetMemHdl o.k.
M ThInit o.k.
M SigIRegisterExitRoutine: exithandler installed (ThSigHandler)
M TskhLoop: tell dispatcher: I'am ready for processing
M LOCK WP ca_blk 56
M LOCK APPC ca_blk 2
M ThIEndBg: end background processing of T-1 (type=0x41, logoff=1, freeResources=0)
M ThISend: (tm/user/type/info = -1/           ?/0x41/0x0, mode_deleted=1)
M    TASK_SW<SID>H
M    DISP
M abap strategy ROLL / O.K.
M ThRqOutCheck: o.k.
M ThNewWpStat (type=0x41, task_sw<SID>h=1, inline_hold=0, hand_shake=0, debug=0, ..)
M ThISend: new wp stat: 0x2
M rdisp/wp_auto_restart = 0 sec
M rdisp/wp_abap_restart = 0
M ThSetThToolParam : restartable_wp[0] = FALSE
M ThSetThToolParam : restartable_wp[1] = TRUE
M ThSetThToolParam : restartable_wp[2] = TRUE
M ThSetThToolParam : restartable_wp[3] = FALSE
M ThSetThToolParam : restartable_wp[4] = TRUE
M ThSetThToolParam : restartable_wp[5] = TRUE
M ThSetThToolParam : restartable_wp[6] = TRUE
M ThDtWpBlk: detach WP ca_blk 56
M ThISend: clear stat record
M PfClearAllRec: clear statistic area
M ThISend: stat_state = TH_STAT_CLEAR
M ThISend: th_wp_waits_for_rq = TH_WP_WAITS_FOR_RQ
M make DISP owner of wp_ca_blk 56
M DpRqPutIntoQueue: put request into queue (reqtype 0, prio LOW, rq_id 18)
M -OUT- sender_id WORK_PROCESS      tid -1    wp_ca_blk   56      wp_id 0
M -OUT- action    SEND_TO_DP        uid -1    appc_ca_blk -1      type NOWP
M -OUT- new_stat WP_WAIT           mode 0     len         8       rq_id 18
M wake_evt_udp_now 1, no dgram needed
M REL APPC ca_blk 2
M ThDtAppcBlk: detach APPC ca_blk 2
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_TASK_SW<SID>H
M TrThHookFunc: called for task sw<SID>h
M ThCallHooks: call hook >ImcResetPtr< for event BEFORE_TASK_SW<SID>H
M ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SW<SID>H
M ThCallHooks: call hook >DbgBeforeTaskSw<SID>h< for event BEFORE_TASK_SW<SID>H
M
M ********* W0 LOOP (DIA) *********
M TskhLoop: save spa pointer 105328a60 and install dummy spa
M ThRqWaitFor: wait for next request (new time slice)
M event-handling: W0, key 50240, flag 50240
M ThAlarm: no previous alarm
M ThRqWaitFor: wait for request
M Fri Feb 22 15:25:42 2008
M in_ThErrHandle: 1
M ThIErrHandle: new stat of W0 is WP_SHUTDOWN
M ThIErrHandle: I'm during shutdown
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
M ThCallDbBreak: use db_sqlbreak
M ThIErrHandle: don't try rollback again
M ThShutDownServer: shutdown server
M PfStatIndInit: Initializing Index-Record
M PfWriteIntoFile: copied shared buf (0 bytes) to local buf
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ThDBDisconnect: disconnect from data base
B Disconnecting from ALL connections:
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time
DBHost
B 000 000 R/3              000000000 INACTIVE     NO YES NO 000 255 255 20080222 152515
<hostname>
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=105b54538,usrhp=105b51478)
C Detaching from DB Server (con_hdl=0,svchp=105b54538,srvhp=105b56868)
C Now I'm disconnected from ORACLE
B Disconnected from connection 0
B statistics db_con_commit (com_total=2, com_tx=0)
B statistics db_con_rollback (roll_total=0, roll_tx=0)
M ThDBDisconnect: disconnect o.k.
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1060) [dpuxtool.c   260]
M Good Bye .....
Best Regards,
L Raghunahth

K9N2 Sli Platinum + SSD OCZ Vertex 3 = Slow Speed Problem [PARTIALLY SOLVED]

Hey folks,
I have a problem with my new SSD. I only get sequential reads of 140MB/s and writes of 114MB/s.
I think it is a driver related issue. I once got faster SATA2-like speeds but cannot reproduce the system settings again... Everything back to SATA1-like speeds after reboot.
First my pc specs:
MSI K9N2 Sli Platinum, BIOS v3.9
- 6 SATAII ports by nForce 750a SLI
- 2 ESATA (External-SATA) ports (back panel) by JMB363
- Supports storage and data transfers at up to 3 Gb/s
AMD Phenom II 965 Black
Patriot PV224G8500ELKB Viper II Series DDR2 4GB (2 x 2GB, CL5 PC-8500/1066MHz)
SSD SATAIII OCZ Vertex 3, 120GB, FW v2.11
LG Internal BlueRay BH10LS30
Windows 7 Ultimate x64
I only get very slow speeds with the SSD. I tried so many things that I am getting very frustrated now, I am even thinking about getting a new board and ram just to get the SSD up to speed...
1)
I installed Win7 first with all the default settings in Windows Setup from DVD. Default "IDE ATA/ATAPI controllers" driver was "Standard AHCI1.0 Serial ATA Controller".
SSD was connected to SATA1-port, On-Chip Sata Controller AHCI enabled in BIOS, Extra RAID/IDE Controller disabled.
All fine, but whichever benchmark I used (AS SSD, HD Tune Pro, Atto Disk Benchmark, CrystalDiskMark; other tools used: DriveControllerInfo, AIDA64/Everest, CrystalDiskInfo ) I got e.g. 140MB/s Read and 114MB/s Write sequentially (CrystalDiskmark, similar with random data AND only zeros ).
Trim working (it seems) with AHCI driver. I also changed to nvstor64 driver (nforce driver setup 15.56), with is marginally faster but not what you would expect from a SATAIII drive on SATAII controller.
2)
I installed Win7 using "diskpart" (Shift-F10) during disk setup, setting a cluster size of 64k instead of default. No real change.
3)
After reinstall of Win7 x64 (again...), I changed from SATA1 port to SATA6 port, also enabled Extra Raid/IDE controller set to AHCI as well.
Nothing changed. With all settings to default in Windows (ahci default driver), I then manually updated the ahci to nvstore64 driver in Device Management, rebooted.
Then a minute later after reboot I got the following Sequential speeds with CrystalDiskMark:
273MB/s read and 137MB/s write (random data) + 274MB/s read and 220MB/s write (with zeros) !!!
While I ran this benchmark Windows came up with a message: "You must restart your computer to apply these changes - Restart Now/Restart Later".
After the previos reboot, when I changed manually from AHCI to NVSTORE, I had changed nothing in the current session, apart from running CrystalDiskMark.
I did reboot and I was back to the slow SSD speeds again = 140/114 MB/s...
4)
I have tried every possible combination of mainboard SATA ports, drivers changing with nvidia setup/manually, deleting and disabling controllers (incl BSOD and startup repair :D ), chaning bios settings around, but I just cannot get back the faster speeds
There is never any change in speed, whether I use ahci or nvstore64, whichever benchmark I use, whether random or zeros...
5)
Could the SSD be broken, something internally preventing it from faster speeds (with this one random exception)?
Could it be that my K9N2 SataPorts only allows for / reduced to SATA1 speeds?
Am I missing something with the driver setup?
Do I need additional drivers for the extra JMicron Controller when using SataPorts 5/6 ?
I have no other mainboard to test this with...
Please guys, I am going to jump out of the window if I can't fix it... :(
Thanks, Mike

Hey guys - problem 'solved':
I tested the OCZ SSD Vertex 3 120GB with following sata3 controller card http://www.lycom.com.tw/PE-115H.htm.
The card itself works immediately (needs at least PCIe x4 slot, will work slower otherwise but still faster than the OCZ SSD @sata1 with nvidia chipset).
There is some raid setup, doesn't apply to me, the boot even with the card is really only a few seconds longer and not annoying at all. Windows (7 x64) needed a driver, supplied on CD (which is cheap and making noise like h**l). The card works w/o the driver but doesn't harm to install it...
Also, just to clarify, this sata controller card did not need any specific setup at all. Just put it in, plug in sata cable (I use akasa sata3-rated), maybe change boot device in BIOS (I didn't even have to), done - booting Windows as usual.
Benchmark CDM with sata controller card Lycom PE-115H:
http://img24.imageshack.us/img24/3845/cdmpe115hahci0x00.png
http://img850.imageshack.us/img850/7549/cdmpe115hahcirand.png
Speed is much better than before with nvidia chipset 750a SLI controller: sata1 (sata2 whenever it randomly worked):
http://img839.imageshack.us/img839/505/cdmahci0x0.png
http://img13.imageshack.us/img13/6258/cdmahci0x0sata6contnv64.png
Final thoughts:
Well, I am happy with the SSD speed now (PCIe limited to 5Gbps). However, I had to spent quite some time to get it working on my sata2-cabable mainboard. Finally, I had to buy a extra controller card to get it working reliably at speeds faster than sata1. There is hardly any useful information on why this problem occurs with (older) nvidia chipsets and OCZ (sata3) SSDs. I still think that OCZ must know about this problem, but regards this issue as low priority, while at the same time not planning on giving up on sales to people with nvidia chipsets. Maybe OCZ should just make a big sticker on the box the drives come in with something like "Does/Might not work with nvidia chipsets, please use third-party sata controller card or different SSD manufacturer". But then none of these potential customers would buy OCZ SSDs...
I will keep the sata3 controller, anyway handy to have, but return the OCZ Vertex 3 120GB and replace it with a SSD from a different manufacturer (Corsair Force GT, Patriot and OWC are not that great to get around here). The benchmarks for most people will not achieve the maximum advertised OCZ speeds anyway, so why not go with a brand that allows for some plug'n'play with some customer support.
Hope this post helps others like me with their nvidia chipset + sata1 speed problem
Cheers, Mike

Problem with startup and Finder

I'm having some slight issues when my MacBook starts up. First, over the last couple of days I've noticed it starts up about a minute slower than it used to. Also, on login, I briefly get a completely blue screen for a few seconds before my desktop picture loads. These two things would not be terribly significant except that my computer used to start up quickly and always loaded the desktop picture instantly, and only recently has that changed. Finally, the major indicator that something is wrong is that every time my computer starts up, a Finder window opens, even if I did not shut down with a Finder window open or in any way tell my computer to show a Finder window on login. Can anyone suggest a reason why I'm having these issues or offer any suggestions for speeding up my startup time, preventing the blue screen from delaying my desktop picture, and not immediately displaying a Finder window without provocation? I'd appreciate any ideas.

I'm having some slight issues when my MacBook starts up. First, over the last couple of days I've noticed it starts up about a minute slower than it used to. Also, on login, I briefly get a completely blue screen for a few seconds before my desktop picture loads. These two things would not be terribly significant except that my computer used to start up quickly and always loaded the desktop picture instantly, and only recently has that changed. Finally, the major indicator that something is wrong is that every time my computer starts up, a Finder window opens, even if I did not shut down with a Finder window open or in any way tell my computer to show a Finder window on login. Can anyone suggest a reason why I'm having these issues or offer any suggestions for speeding up my startup time, preventing the blue screen from delaying my desktop picture, and not immediately displaying a Finder window without provocation? I'd appreciate any ideas.

SAP R/3 Problem

I need some detail solutions and suggests about below these problems [SAP R/3] :
Problem 4: Problems in the installation of SAP R/3 Server
Problem 4.1: Computer Name of the SAP R/3 server has been changed after the full installation of Oracle 9i and SAP R/3.
Problem 4.2: A network card of a server was faulty and it was replaced by a new network card but the SAP R/3 license was expired.
Problem 4.3: You would like to reinstall SAP R/3 on a server which has previously installed with SAP R/3 but the same error message appears during the re-installation.

HI,
I don't know the answer to your questions, but these are more of a SAP Baisis question. I would suggest posting this question on the Basis forum.
Naing

Fan speed problem Power Mac G5 Dual 1.8 GHz PowerPC - please help

Please HELP, I have a fan speed problem with my Power Mac G5 Dual 1.8 GHz PowerPC
This is a NOT an Intel machine. I am running Mac OS X v10.5.8
Power Mac G5 - PowerMac 7,2 - Power PC 970 (2.2) - 1.8 GHz with 2 CPUs - L2 Cache (per CPU) 512 KB - Memory 8 GB - Bus Speed 900 MHz - Boot ROM version 5.1.5b1
I have included below Links to download a sound file (.m4a) that I recorded of the fan speed problem and both a .pdf and .spx files of my system profile.
download sound file
http://homepage.mac.com/rep3/filechute/myG5dualsFans.m4a
down load .spx file of my system preferences
http://homepage.mac.com/rep3/filechute/systemProfileREP3-G5dual.spx
down load .pdf file of my system preferences
http://homepage.mac.com/rep3/filechute/systemProfileREP3-G5dual.pdf
When did the fan problem start?
After I replaced the mother board on the computer.
Why did I replace the mother board?
Because the experts at apple agreed with my diagnosis that the major crash problems & kernel panics must have some thing to do with a logic board gone bad. They would not work on it, because this Power Mac G5 dual 1.8 GHz machine is now a legacy model.
What I have done to attempt to fix my fan speed problem? yes I checked the obvious things, here is a list:
1) yes I checked to be sure that the new mother board was the same part number as the original one, and that all things that were unplugged from the old mother board - were actually plugged into the new mother board.
2) all the fans work, I can see them spinning if I use a flashlight and look at them (cover on and off to get at some of them)
3) check all RAM to make sure: a) it was installed properly b) that the RAM worked using TechTool Pro c) even started the machine with only the original RAM that came with it.
4) I installed a Temperature monitor - to see if there was something reading as very hot inside that was causing the machine to continually run the fans at a high speed. No, no heat issues that I can see. Here are the reading from the sensors in degrees fahrenheit, 2009-10-11 16:11:01 -0500
CPU A Die Temperature: 75.7℉
CPU B Die Temperature: 81.5℉
Drive Bay: 68.9℉
Main Logic Board Air Inlet: 64.8℉
Main Logic Board Ambient: 73.6℉
Main Logic Board Backside: 76.3℉
Memory Controller Heatsink: 93.2℉
Processor Card A Ambient: 77.5℉
Processor Card B Ambient: 77.0℉
5) zapped the PRAM
6) followed the SMU reset instructions for
Power Mac G5 (Late 2004)
To reset the SMU on a Power Mac G5 (Late 2004) computer, simply do the following:
• Turn off the computer by selecting Shut Down from the Apple menu or by holding the power button until the computer turns off.
• Remove the power cord from the computer.
• Wait two minutes.
• Plug in the power cord.
• Turn on the computer.
7) followed the SMU reset instructions:
Resetting the Cuda/PMU
How to reset the PMU:
• If the computer is on, turn it off.
• Disconnect ALL cables from the computer, including peripherals and power.
• If possible, move the computer to a place where you are not standing on carpet.
• Open the case and ground yourself by touching part of the metal frame inside the computer.
• Find the Cuda or PMU button
• Press the Cuda or PMU button ONCE. Do not press the button more than once before starting the computer up again.
• Wait 10 seconds, then reconnect the cables you removed in step 2 and turn the computer on.
• If the computer still does not respond after resetting the PMU, the computer may require service from an Apple Authorized Service Provider.
8) ran disk utilities, repaired permissions
9) found a setting in the system preferences that a chat room person suggested had something to do with fan speed. In Energy Saver, under options, processor performance was set to highest, I set it to automatic - this did not change anything that I could tell - BTW I checked my other G5 (a single processor that works fine) that is the setting that that it is set to, and it is nice and quiet.
10) restarted the machine, ..
11) found a Fan Control System Update - but it did not install when I tryed to install it -
12) booted from OSX install disk and ran that disk utility
13) used OnyX to fix disk permissions, clear caches and temp items
Nope - still have the same high speed fan problem. ... PLEASE HELP!!
I have been reading in the MacInTouch reader reports - found this: some one said to use this - thermal re-calibration using the Apple Authorized Service Providers' disk - but that's not available, at least I can not find it - anyone? have an answer to finding this - or can do it for me? I am in Chicago.

The Genius at the downtown apple store said that because it's a "legacy machine" they would not work on it, .. so should I push them?
Well, I personally think that's ridiculous, I'd Push them, I'd call AppleCare & talk up the chain if need be... there the ones that have or should have that Disc... man o man... Personally I'll never visit an Apple Store again in my lifetime, maybe try an independent AASP if none of that helps!..
http://tinyurl.com/ykomqkn
Man-o-man, pop my cork before I explode on that one, if I had anything to do with it I'd close that store.

Extraction from SAP, hidden fields problem

Hi Expeerts,
I have the following problem / question:
From an SAP Datasource (2lis_11_vaitm) we have some fileds, those are HIDED, and we need them. This is a central SAP, and a lot of BW systems connect to this SAP.
The problem is, that we need a field from that datasource (and other BWs do not need), that has 'HIDDEN' option. The SAP side is afraid of having problem, when they just uncheck that option. (TELF1; KONDA fields we need).
Does anyone know, what is the affects on other BW systems, when we unhide this fields? Of course we load with delta from this source.
If a field is hidden in SBIW-Maintain Datasources, am I right, that the delta does not collect those fields, or it is collected, just not sent to BW systems?
Any good idea, how can we get that fields in other way, because it seems, that the datasource cannot be modifyed, because of the other countries' BWs, connected to teh centra SAP.
I hope i were clear, but if not, please ask me.
Thanks for Your help.
Laszlo
Edited by: László Györkös on Jan 30, 2009 11:07 AM

Hi,
If a field is hidden in SBIW-Maintain Datasources, am I right, that the delta does not collect those fields, or it is collected, just not sent to BW systems?
--> As hidden fields are already available in extract strucute, unhiding will not create any problem. As far as i know hidden means it will transfer data from extract structure to further.
--> You can try pulling this particular data using generic datasource. OR
--> Enhance datasource by adding required fields and use. OR
--> Unhide files and use.
Note: Bit careful while transpporting datasource to production as time stamp changes.
Srini

Athalon XP clock speed problem

I hav just installed a K7N2 Delta Mobo in my system, but I'm having CPU clock speed problems.
The Bios and the Infoview program both state that the CPU clock is running at 1105 Mhz. I am sure this should be 1533 Mhz for an 1800xp.
I updated the bios using MSI live update, and the first time I booted the system, the bios displayed the speed as 1533 Mhz, but on every subsequent boot up it is back down to 1105 Mhz again.
How can I get my processor to run at the correct speed?
Thanks
Trev

Sorry, just realised I have posted in the wrong forum.
Please forgive me

Problem in Startup 10g DB

Dear all
i m facing a little problem in startup 10g DB i m using 10g DB on Windows 2000 Professional operating system
when i start data base from enterprize manager i log on SYS user then i select Startup then i feed some parameter like
1) Host Credentials
Specify the OS user name and password to login to target database machine
i feed there operating system user name & passowrd
then
2)Specify the credentials for the target database.
To use OS authentication, leave the user name and password fields blank.*
i enter sys user and his password
Database yasir
Connect As SYSOPER
when i pressed OK button then ii face that error
Error Message
RemoteOperationException: ERROR: Wrong password for user
but my both password operatin system & sys password are correct
any one have any idea what is problem & how can i slove my problem
Thanks
Rizwan

From control panel go to
1. Administrative tool---local security policy---local security settings
2.From the local security settings windows: local policies---user rights assignment
3.double click "log on as a batch job, add the administrative user you want to assign on the OEM.
Hope this works for you.

Java Audio Metronome | Timing and Speed Problems

Hi all,
I’m starting to work on a music/metronome application in Java and I’m running into some problems with the timing and speed.
For testing purposes I’m trying to play two sine wave tones at the same time at regular intervals, but instead they play in sync for a few beats and then slightly out of sync for a few beats and then back in sync again for a few beats.
From researching good metronome programming, I found that Thread.sleep() is horrible for timing, so I completely avoided that and went with checking System.nanoTime() to determine when the sounds should play.
I’m using AudioSystem’s SourceDataLine for my audio player and I’m using a thread for each tone that constantly polls System.nanoTime() in order to determine when the sound should play. I create a new SourceDataLine and delete the previous one each time a sound plays, because the volume fluctuates if I leave the line open and keep playing sounds on the same line. I create the player before polling nanoTime() so that the player is already created and all it has to do is play the sound when it is time.
In theory this seemed like a good method for getting each sound to play on time, but it’s not working correctly.
At the moment this is just a simple test in Java, but my goal is to create my app on mobile devices (Android, iOS, Windows Phone, etc)...however my current method isn’t even keeping perfect time on a PC, so I’m worried that certain mobile devices with limited resources will have even more timing problems. I will also be adding more sounds to it to create more complex rhythms, so it needs to be able to handle multiple sounds going simultaneously without sounds lagging.
Another problem I’m having is that the max tempo is controlled by the length of the tone since the tones don’t overlap each other. I tried adding additional threads so that every tone that played would get its own thread...but that really screwed up the timing, so I took it out. I would like to have a way to overlap the previous sound to allow for much higher tempos.
I posted this question on StackOverflow where I got one reply and my response back explains why I went this direction instead of preloading a larger buffer (which is what they recommended). In short, I did try the buffer method first, but I want to also update a “beat counter” visual display and there was no way to know when the hardware was actually playing the sounds from the buffer. I mentioned that on StackOverflow and I also asked a couple more questions regarding the buffer method, but I haven’t received any more responses.
http://stackoverflow.com/questions/24110247/java-audio-metronome-timing-and-speed-problems
Any help getting these timing and speed issues straightened out would be greatly appreciated! Thanks.
Here is my code...
SoundTest.java
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
import java.io.*;
import javax.sound.sampled.*;
public class SoundTest implements ActionListener {
    static SoundTest soundTest;
    // ENABLE/DISABLE SOUNDS
    boolean playSound1 = true;
    boolean playSound2 = true;
    JFrame mainFrame;
    JPanel mainContent;
    JPanel center;
    JButton buttonPlay;
    int sampleRate = 44100;
    long startTime;
    SourceDataLine line = null;
    int tickLength;
    boolean playing = false;
    SoundElement sound01;
    SoundElement sound02;
    public static void main (String[] args) {
        soundTest = new SoundTest();
        SwingUtilities.invokeLater(new Runnable() { public void run() {
            soundTest.gui_CreateAndShow();
    public void gui_CreateAndShow() {
        gui_FrameAndContentPanel();
        gui_AddContent();
    public void gui_FrameAndContentPanel() {
        mainContent = new JPanel();
        mainContent.setLayout(new BorderLayout());
        mainContent.setPreferredSize(new Dimension(500,500));
        mainContent.setOpaque(true);
        mainFrame = new JFrame("Sound Test");
        mainFrame.setContentPane(mainContent);
        mainFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        mainFrame.pack();
        mainFrame.setVisible(true);
    public void gui_AddContent() {
        JPanel center = new JPanel();
        center.setOpaque(true);
        buttonPlay = new JButton("PLAY / STOP");
        buttonPlay.setActionCommand("play");
        buttonPlay.addActionListener(this);
        buttonPlay.setPreferredSize(new Dimension(200, 50));
        center.add(buttonPlay);
        mainContent.add(center, BorderLayout.CENTER);
    public void actionPerformed(ActionEvent e) {
        if (!playing) {
            playing = true;
            if (playSound1)
                sound01 = new SoundElement(this, "Sound1", 800, 1);
            if (playSound2)
                sound02 = new SoundElement(this, "Sound2", 1200, 1);
            startTime = System.nanoTime();
            if (playSound1)
                new Thread(sound01).start();
            if (playSound2)
                new Thread(sound02).start();
        else {
            playing = false;
SoundElement.java
import java.io.*;
import javax.sound.sampled.*;
public class SoundElement implements Runnable {
    SoundTest soundTest;
    // TEMPO CHANGE
    // 750000000=80bpm | 300000000=200bpm | 200000000=300bpm
    long nsDelay = 750000000;
    long before;
    long after;
    long diff;
    String name="";
    int clickLength = 4100;
    byte[] audioFile;
    double clickFrequency;
    double subdivision;
    SourceDataLine line = null;
    long audioFilePlay;
    public SoundElement(SoundTest soundTestIn, String nameIn, double clickFrequencyIn, double subdivisionIn){
        soundTest = soundTestIn;
        name = nameIn;
        clickFrequency = clickFrequencyIn;
        subdivision = subdivisionIn;
        generateAudioFile();
    public void generateAudioFile(){
        audioFile = new byte[clickLength * 2];
        double temp;
        short maxSample;
        int p=0;
        for (int i = 0; i < audioFile.length;){
            temp = Math.sin(2 * Math.PI * p++ / (soundTest.sampleRate/clickFrequency));
            maxSample = (short) (temp * Short.MAX_VALUE);
            audioFile[i++] = (byte) (maxSample & 0x00ff);
            audioFile[i++] = (byte) ((maxSample & 0xff00) >>> 8);
    public void run() {
        createPlayer();
        audioFilePlay = soundTest.startTime + nsDelay;
        while (soundTest.playing){
            if (System.nanoTime() >= audioFilePlay){
                play();
                destroyPlayer();
                createPlayer();
                audioFilePlay += nsDelay;
        try { destroyPlayer(); } catch (Exception e) { }
    public void createPlayer(){
        AudioFormat af = new AudioFormat(soundTest.sampleRate, 16, 1, true, false);
        try {
            line = AudioSystem.getSourceDataLine(af);
            line.open(af);
            line.start();
        catch (Exception ex) { ex.printStackTrace(); }
    public void play(){
        line.write(audioFile, 0, audioFile.length);
    public void destroyPlayer(){
        line.drain();
        line.close();

Thanks but you have never posted reply s0lutions before ?? And F 4 is definitely not 10 times faster as stated before I upgraded !!

I faced white screen with gray line problem on startup. How to fix it?

I faced white screen with gray line problem on startup. How to fix it?

Hi vikashjha,
Thanks for visiting Apple Support Communities.
You may find some of the troubleshooting steps in this article helpful:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Jeremy

Recovery harddrive is reporting a problem on startup. where do I start on trouble shooting the drive

Recovery harddrive is reporting a problem on startup. where do I start on trouble shooting the drive

Hi,
Shut down the notebook. Tap away at f10 as you start the notebook to enter the bios menu. Under the Advanced or Diagnostic tab you should find the facility to run a tests on the whole Hard Drive. Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Problems during startup NWDS

Hello Experts,
Need your help: I got an error "Problems during startup, Check the ".log"....." when starting NWDS. I checked .log, here is the errors:
org.eclipse.core.internal.boot.DelegatingLoaderException: org.eclipse.core.runtime.CoreException: Problems encountered starting up plug-in: "org.eclipse.core.resources".
at org.eclipse.core.internal.plugins.PluginDescriptor.internalDoPluginActivation(PluginDescriptor.java:754)
at org.eclipse.core.internal.plugins.PluginDescriptor.doPluginActivation(PluginDescriptor.java:188)
at org.eclipse.core.internal.plugins.PluginClassLoader.activatePlugin(PluginClassLoader.java:112)
Any suggestions/advises?
Thanks, Jin

Hi,
Take the backup of .metadata folder, then delete that from your workspace.
If you delete the .metadata file - It will no do any harm to your existing projects in your workspace.
But you need to import them into the NWDS again.
If there is any issue you delete the new .metadata and place the old backup .metadata.
There are no issues. I did that just now
Or
Instead of deleting the .metadata you can try giving the new workspace in -data of NWDS.
And in new workspace copy your old projects (from old workspace) and import them again into NWDS.
How to give -data
Right click on NWDS shortcut on desktop and in shortcut tab
in target input:
For example already you have like this
D:\IDE70\eclipse\SapIde.exe -vm "C:\Program Files\Java\jdk1.5.0_04\bin\javaw.exe"
then at the end add
-data "C:\NewWorkspace"
Regards,
Charan

What kind of mathematical optimization problems exits in SAP? (NP problems)

What kind of mathematical optimization problems exits in SAP?
I don't use SAP and don't have any experience with SAP but I would be interested what complex optimization problems, preferably "NP problems", exits or where a fast solution (semi-solution) to such problems would be beneficial.

I think that no exists standard routines about NP problems in SAP.
OK. But this is not what I asked for.
What kind of mathematical optimization problems exits in SAP? (NP problems)
Hence, if you have such an algorithm, where can it be applied in SAP? Where is it useful?
I would especially be interested in problems where the space is so big that can not be completely tested.

SAP B1 speed Problem at startup

Similar Messages

Maybe you are looking for