SAP B1 tables description
Hi,
does anyone know where i can get a documentation of the SAP B1 tables. What i need is a documentation, which contains the description of the tables.
Thx for help
Hi Frank,
You can find the descriptions of tables and fields in the SDK Helpcenter.
On the right you see "database table reference"
Hope this helps
Regards
Ad
Similar Messages
-
Hi Gurus,
Please let me know in which table are the Open Hub table descriptions stored?
Also let me know if there is any function module that gives the description of Open Hub tables when we pass Open Hub Technical name?
Regards,
G.Srinivasanhi,
you can check the below doc it has all the tables relate to open hub destination
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/library/icc/bw-ohs%20open%20hub%20service%2c%20third-party%20integration.pdf
the blow thread is relate to the same question you have asked
Re: How to Change OpenHub Destination
hope this helps.
regards,
Mahesh -
Error using sap.m.SegmentedButton in sap.ui.table.Table
Hey,
I'm trying to place SegmentedButtons in a SAP mobile table via DataBinding.
Everything is fine until I click on the SegmentedButton. Then the console shows the following error:
Uncaught TypeError: Cannot read property '$' of undefined SegmentedButton-dbg.js:714
→ The variable "sLastSelBtnId" is null when the error occurs!
var oTable = new sap.ui.table.Table({
selectionMode: sap.ui.table.SelectionMode.None,
columns: [
new sap.ui.table.Column({
label: new sap.ui.commons.Label({
text: "Description"
template: new sap.m.Label({
text: "{status}"
new sap.ui.table.Column({
label: new sap.m.SegmentedButton({
buttons: [
new sap.m.Button({ text: "on" }),
new sap.m.Button({ text: "off" }),
new sap.m.Button({ text: "unkown" }),
template: new sap.m.SegmentedButton({
buttons: [
new sap.m.Button({ text: "on" }),
new sap.m.Button({ text: "off" }),
new sap.m.Button({ text: "unkown" }),
Does anyone know the problem?
Regards
RobinNo, sorry! The Segmented-Button in the header of the table still works.
But if you you DataBinding to generate some rows, these generated buttons will not work:
var oTable = new sap.ui.table.Table({
selectionMode: sap.ui.table.SelectionMode.None,
columns: [
new sap.ui.table.Column({
label: new sap.m.Label({
text: "Description"
template: new sap.m.Label({
text: "{status}"
new sap.ui.table.Column({
label: new sap.m.SegmentedButton({
buttons: [
new sap.m.Button({ text: "on" }),
new sap.m.Button({ text: "off" }),
new sap.m.Button({ text: "unkown" }),
template: new sap.m.SegmentedButton({
buttons: [
new sap.m.Button({ text: "on" }),
new sap.m.Button({ text: "off" }),
new sap.m.Button({ text: "unkown" }),
var model = new sap.ui.model.json.JSONModel({ "states": [ { "status" : "on" }, { "status" : "off" },{ "status" : "on" },{ "status" : "off" },{ "status" : "unkown" },{ "status" : "unkown" },{ "status" : "on" },{ "status" : "on" },]});
oTable.setModel(model);
oTable.bindRows("/states");
oTable.placeAt('content');
Tested on JSBin.
Regards
Robin -
Insert /delete data from SAP Z table to Oracle table and opposite
Hi,
Can u help me write this FM from the SAP side?
So, I have two tables ZTABLE in SAP and Oracle table ORAC.
Let's put three columns in each of them, for example
TEL1
TEL2
ADRESS
NAME
where TEL field is primary from ZTABLE to ORAC...
(in FM there shoud be abap code for writing data in ZTABLE after we press some pushbutton made in sap screen painter..)
for example, when we write new record in ZTABLE
00
112233
Street 4
Name1
this data shoud be inserted in Oracle table ORAC.
when we write new record in Oracle table for example
01
445566
New Street
Name2
this data shoud be inserted in ZTABLE.
Field TEL1 can be only of two values 01 or 02, other combination is not valid...
I must have all data from Oracle table ORAC in ZTABLE and opposite.
It should be the same scenario for DELETE...
And this communication should be online between sap and table in oracle database...
Can u help me from sap side? and give idea how to configure on oracle side??
Thanks a lot,
NihadI dont know if we can directly connect to a oracle database ( wait for the answers from others on this )
but in XI we have the JDBC adaptor to insert and retrieve data.
so for the outbound from SAP the flow can be something like this (with XI in landscape):
1) You have a screen to maintain a new entry / delete an entry
2) On save , this record gets saved or deleted from the Ztable in SAP
3)) In the same screen you can call a proxy class-method (generated using SPROXY transaction ) to send the record to XI.
4) XI to format it and insert into the oracle table
Mathews -
Help Required -- Can we use SQL Query to READ data from SAP MDM Tables
Hi All,
Please help.........
Can we use SQL Query to READ(No Creation/Updation/Deletion just Read) Data from SAP MDM tables directly, without using MDM Syndicator.
Or direct SQL access to SAP MDM tables is not possible. Only through MDM Syndicator can we export data.
Thanks in Advance
RegardsAll the tables you create in Repository comes under A2i_CM_Tables in Database named as your repository name. So the tables names are fields of table A2i_CM_Tables. Now i tried it but cant make it.
Now, I dont think its possible to extract all fields in tables and there values using select query. May be pure sql guy can do that or not.
But there is no relation of data extraction and syndicator. Data is viewed in Data Manager. and you can also store data in a file from DM also.
BR,
Alok -
Dear Expert,
I have question about SAP MM table.
I have material with MRP type is PD and lot size is EX, let say this material is X.
Then i create reservation from WO using material X. In MD04, we will see there is requirement for material X under that WO. Stock does not exist than MRP Run will create PR to fulfill this requirement.
But we do not know, this PR was trigeer by what WO.
I want to ask all of you, is there table for SAP to save this mapping.
So we can surely thougt that this PR came from this WO.
I just trying to trace, i found MDRS, but in this table, i am not found the PR number with specific.
Please let me know, if you have information
Appreciate for your help and Thank you
Regards,
SilviaHi Silvia,
In MD04, click on the PR & click on pegging info, you will be able to see which WO is calling this PR.
If you want to check for a lot of materials at a given time, then create a Z report & call the FM -> MD_PEGGING_NO_DIALOG
But note that the same PR / planned order can be pegged to many requirements depending on the MRP parameters maintained in the MRP views.
Hope the above answers your query.
Regards,
Vivek -
Dear All!!!!!!!!!!!
I am new to SAP BO crystal reports.
I want to extract the data from SAP R3 tables and design the crytal report. When i tried to make a new connection;
We have lot of connection as OLAP;OLE DB and etc, I am not sure how to establish a connection between R3 tables and crystal reports. I cannot able to find documents too...
Is there any documents available to make the connection or can anyone help me out to figure this..........
Thanks in advance.
Regards,
Suman.Dear Efstratios Kara,
I installed SAP Integration Kit 3.1. Yes I installed the integration kit after installing CR.
I have uninstalled the earlier version and i have reinstalled CR with (12.3.0.601) version.
But still i cant view the SAP connectivity. can u tell me from which version they have included this connectivity option in CR.
If CR going to support SAP Table connectivity on specific version, what is that version.
Waiting for your reply.
Regards,
Suman -
HOW TO FIND OUT TABLE DESCRIPTION FROM JDBC?
HOW WILL FIND OUT TABLE DESCRIPTION FROM JDBC?
Have a look at ResultSetMetaData
getColumnCount()
getColumnName(int)
getColumnTypeName(int)
getColumnDisplaySize(int)
***Annie*** -
Value of new field in SAP internal table does not appear in HTML
There is already an existing web application. (has both SAP and HTML programs)
I only need to add one field in the SAP internal table and display the value in HTML.
I activated and pushed the publish button in SAP.
Still, it is not read successfully in HTML and therefore not displayed in the GUI.
What step did I miss?Hi,
To publish completely an internet service, try SIAC_PUBLISH_ALL_INTERNAL transaction.
Hope this helps,
Iván. -
SAP transparent table stores condition value of Shipment cost
HI
I need to know which SAP transparent table stores condition value of Shipment cost document (specific for Freight condition which derived from Bulkiness group).
Background:
Minimum load calculation logic
In the pricing procedure for shipment cost we have two conditions: One is ZMIN (similar with SP00) which is having condition class u201CHu201D, Calculation type u201CGu201D which determine Bulkiness group according to access sequence. Bulkiness group is where we define different group with different minimum load. e.g. ZCEM16 u2013 25.TON (22.68) Second condition is ZAFR (Similar with FB00), ZAFR calculates the base value from ZMIN (Compare actual weight with Min weight value of Bulkiness group), if the net weight is 23 ton, it will calculate at 25 ton because of the bulkiness group.
Now I need to know in which table system stores dynamic value of ZMIN? Just like we have PR00 in KONV which we can find from KNUMV of billing / sales order. If I use the same logic then I donu2019t find ZMIN Condition type and value in KONV table for the specific shipment cost document. Please advice how to and from which Table I can find Bulkiness group value of Shipment cost document.
ThanksHi,
Get the shipment cost number from shimpment document (document flow or shipment document header).
Goto VFKP table,enter shipment cost number and choose detials. get the document condition number from KNUMV field.
Now goto KONV and enter document condition number and choose details. you can see condition type and value.
Thanks & Regards,
Chandrasekhar -
Dynamic binding of items in sap.m.Table using JS views
HI,
I am developing a master detail page for a Purchase Order application. In master page, i display the list of Purchase Orders & on clicking the PO, i should display the detail page.
We use different ODATA models for Master & detail page. I am able to successfully list the POs in master page & i am struggling on the part where i have to pass the selected PO number to the new ODATA service URL & then display the details in a table.
Below is the code i use on TAP of Purchase order from master page:
tap: function(oEvent)
sap.ui.getCore().byId("PODetailstable_nodata_id").setVisible(false);
var oContext=oEvent.getSource().getBindingContext();
var odataModel_PO_detail = new sap.ui.model.odata.ODataModel(detailServiceUrl,false, "dev_sde", "28aug@2013");
odataModel_PO_detail.setCountSupported(false);
var tappedPONumber= oContext.getProperty("PONumber");
var path = "/POHeaderSet('"+tappedPONumber+"')/HDRtoITM";
PO_DetailsPage.setBindingContext(oContext);
sap.ui.getCore().byId("po_details_table_id").setModel(odataModel_PO_detail);
sap.ui.getCore().byId("po_details_table_id").bindContext(path);
sap.ui.getCore().byId("po_details_table_id").setVisible(true);
And below is the code of my Detail page & the table: I set the bindcontext with new path at "tap" function in master page, i also do bindaggregation for the table with the new path.
The issue is i am able to HIT the new service URL, but no data is displayed. There is also a demo application on the same, but w/o source code it doesnt help me much in resolving this issue.
var PODetailstable_nodata = new sap.m.Table("PODetailstable_nodata_id",{title : "No Data"});
var po_details_table = new sap.m.Table("po_details_table_id", {
inset: true,
headerText: "table for Detail page",
columns: [
new sap.m.Column({
header: new sap.m.Label({ text: "PO Number" }) }),
new sap.m.Column({ header: new sap.m.Label({ text: "Vendor" }) }),
new sap.m.Column({
header: new sap.m.Label({ text: "Vendor Name" }) }),
var oTemplate = new sap.m.ColumnListItem({
cells: [
new sap.m.Text({ text: "{PoNumber}" }),
new sap.m.Text({ text: "{Vendor}" }),
new sap.m.Text({ text: "{VendorName}"})
po_details_table.bindAggregation("items", {
path:"/POHeaderSet('"+"{PONumber}"+"')/HDRtoITM",
template: oTemplate
var PO_DetailsPage = new sap.m.Page("PO_DetailsPage_id",
// title : "Purchase Order Details",
title : "{PoNumber}",
content : [
PODetailstable_nodata,
po_details_table,
footer : new sap.m.Bar
contentRight: [
new sap.m.Button({
text : "Approve",
//press: oController.approve_pr,I have modified my code by referring another forum,
on Tap, i now invoke a method from controller to update the binding i.e to pass the clicked PO number to the context.
updateBinding: function(oEvent)
alert("updatebinding");
var detailServiceUrl = "http://incas1054.ind.cldsvc.accenture.com:8000/sap/opu/odata/sap/ZPURCHASE_PAY_SRV";
var odataModel_PO_detail = new sap.ui.model.odata.ODataModel(detailServiceUrl,false, "dev_sde", "28aug@2013");
odataModel_PO_detail.setCountSupported(false);
var tableView=sap.ui.getCore().byId("po_details_table_id");
tableView.setModel(odataModel_PO_detail);
alert(tableView.getModel());
var oContext = tableView.getBindingContext();
//tableView.bindContext("/POHeaderSet");
alert(oContext);
var path= oContext.sPath + "/HDRtoITM";
var oTemplate = new sap.m.ColumnListItem({
cells: [
new sap.m.Text({ text: "{PoNumber}" }),
new sap.m.Text({ text: "{Vendor}" }),
new sap.m.Text({ text: "{VendorName}"})
tableView.bindItems(path, oTemplate);
Now, i see the PO number is set in the context, but i want to set a different context for details page as i hit different URL, Can anyone suggest on how to set a different context for details page & then pass the PO number from master to detail page? -
How to change the lenth of existing field in sap standard table
Hi all,
can anybody help,my requirement is, how to change the length of existing field in sap standard table....
thanks in advance..Which field are you thinking of in particular? Are you wanting to increase or decrease the length?
Some fields are used so extensively that a change to their length will mean adjusting many tables, some of them potentially very large, and hence taking a long time to adjust.
Some standard SAP programs expect certain fields to be of specific lengths and won't work if the length is changed.
Some screens could cease to work.
If you decrease length, then you could lose data.
matt -
Function module to get table description
Is there any function module to get table description on passing table name
Hi,
We need to use : 'G_RW_TABLE_DESCRIPTION_GET' function module.
we pass the table name and the language.
call function 'G_RW_TABLE_DESCRIPTION_GET'
exporting
rw_table = p_table
langu = sy-langu
importing
tab_text = l_tabtext
exceptions
others = 1.
thanx. -
SAP PI Table which stores Dynamicconfiguration(filename) for file sender
Hello All,
What is the SAP PI table in which SOAP header elements are getting stored. In my scenario, i need to find out the message ID for a specific file name which is picked by file sender, as file name is stored under Dynamicconfiguration of SOAP header node...
Regards,
Sreenivas.Hi Sreenivas,
I am not sure if I have understood your requirement correctly but can't you achieve this using a UDF:
String headerField;
java.util.Map map;
AbstractTrace trace=container.getTrace();
map = container.getTransformationParameters();
String key = "MessageId";
headerField = (String) map.get(key);
return headerField;
Let us know.
Regards,
Shweta -
Whats SAP internal table which populate data in reuest tab of manags of DSO
HI team ,
I want to know do any one know about SAP interanl table which might be used to polpulate data in Request tab of DSO manage.
Where we see all information about request loaded in DSO , I want to know that underline table name.
Regards
Ashutosh DHi
Table RSICCONT table contains the requests that are actually loaded in a target.(the table which actually populates the data in request tab)
Table RSMONICDP contains the request id of the fact table.
Table RSODSACTREQ contains information if an ODS is available for reporting/deleting inactive requests also possible.
In table RSBODSLOGSTATE see the entries for your DSO and request
Hope this helps
Regards
Shilpa
Maybe you are looking for
-
Can I sync my Nano 6G and an iPod 5G, and keep video podcasts off my Nano?
Can I use my Macbook to sync both a Nano 6G and an iPod Touch 5G, and specify which podcasts go on which device? I don't want video podcasts on my Nano. Thank you.
-
ok guys just after trying everything for changing dates and all the steps that were mentioned I was soo hearbroked cuz nothing was woking for me...I was still unable to upate from itune store and even my facebook was not working after updating to IOS
-
Hi, I would like to develop a user interface in labview environment. i would like to develop pipe and instrumentation diagram(flow control with valves,pipe etc). so now my question is. does labview offers symbols for Pipe and instrumentation diagram?
-
SimpleDateFormat and Daylight Savings Time
I am trying to parse into a Date "April 15 1999" with "MMM d YYYY" using SimpleDateFormat. This string parses w/out error and the resulting Date is: Thu Apr 15 00:00:00 PST 1999. This is correct in that I am in California. The problem is that 4/15 is
-
Sequence of starting Services for dashboardtemplates.xml changes
Hi, In What sequence the services should be brought down and started to reflect changes made in dashboardtemplates.xml . We have Websphere running in Unix box and cannot bring down entire Websphere since it host other applications as well. So is it o