SAP B1 was not able to import layout/report.

Good day!...
What could be the possible reason why the layout/reports cannot import successfuly in report and layout import wizard?
I tried to import new layout/report (crystal report) using report and layout import wizard but after the procedure has been done, the layout/report was not imported successfuly. There's no problem if I will overwrite the existing report but when it comes to new report, this problem exist.
Thanks.
RD

Hi!
What connection you are using in the CR. Is that ODBC or OLEDB.
OLEDB connection would be preferable.
Can you paste your query what you have used in the CR.
Do you able to browse and choose the CR file in the Report and Layout manager.
Did the file is in your local system.
Please in which step you are not able to import the file, what is the error it showing on the screen

Similar Messages

Lightroom 5.6 crashing, not able to import or back up changes

I have been having issues with Lightroom 5.6 for few days now. I have been working from this Lightroom install for a year now problem free. The problem seems to happen when I try to import pictures. At first I thought it was my SD card but I copied the pictures to my desktop and was not able to import from the file on my desktop. It will start to download a few out of 400 and stop at 2 or 3 pictures then freeze. A message pops up that says "Lightroom encountered a problem and needs to quit" When i try to open Lightroom again I will get a message that says "The last time Lightroom ran, it shut down prematurely due to a problem reading the catalog. Lightroom must now check the catalog before proceeding." It will proceed to check integrity of the catalog then another message pops up saying it was repaired successfully. When I try to open, same stuff happens all over again.
I have not moved any files around through the external hard drive and there are no images in the catalog that are "missing." So I'm a little confused as to why Lightroom suddenly keeps crashing.
I am able to export images from the same catalog, I am able to edit pictures as I normally would,but I am unable to Back up the changes or import new files. I tried working from a different external hard drive and the same thing happens.
Please help!!

Are you able to import 450D raw files into LR5.5via USB connection and are you on Windows 7/8?
I agree with your observations concerning SD vs CF card fragility, but they also have a limited number of insertions before failure.
http://en.wikipedia.org/wiki/USB#Durability
The newer Micro-USB receptacles are designed for up to 10,000 cycles of insertion and removal between the receptacle and plug, compared to 1,500 for the standard USB and 5,000 for the Mini-USB receptacle. This is accomplished by adding a locking device and by moving the leaf-spring connector from the jack to the plug, so that the most-stressed part is on the cable side of the connection. This change was made so that the connector on the less expensive cable would bear the most wear instead of the more expensive micro-USB device.
All my Canon cameras have micro-USB connectors. With one (1) insertion and removal per day that equals 10,000 days, or about 27 years before end-of-life! SD and CF cards are also rated at ~10,000 insertion and removals, but more prone to damage from static electricity and handling due to the exposed contacts and fragility of CF card sockets.
So there's no real advantage from the camera wear perspective to using a card reader. I'd say use whatever method is easiest for your workflow, but handle memory cards with care and avoid exposing them to static discharge. Ground yourself to something metal before removing memory cards and inserting them into the card reader, especially in cold Winter months.
BTW- I helped design one of the first semiconductor DRAM memory systems back in 1970. We killed more memory chips than I care to count before we discovered they were easily damaged by static electricity. Today's ICs have built-in protection, but you can still damage them with a big enough static ZAP!

** Not able to import IDoc from SAP ECC system

Hi Friends,
I am not able to import the IDoc from SAP ECC system in IR. I have checked that, hostname, client, server no. everthing is correct. I checked in SLD also. Host Name is correct.
While import (after giving the user name and password), I am getting the following error.
Problems to reach R3 System
What could be the probelm ?
Kindly help me friends.
Thanking you.
Kind regards,
Jegathees P.

Hi,
Just counter check following step
1. Go to SWCV definition tab select radio button for Import of RFC....
2. In Connection Data for Import from SAP System maintain correct System and correct Client.
3. Make sure you maitain ECC system in Central SLD.
4. In Import Screen check at the top of the screen have SAP System, is that system from where you want to import the IDOC.
With Regards
Sunil

My hard drive failed. I was able to restore my files from an external hard drive. I have my bookmarks saved but am not able to import them into Firefox as the only option is to import them from another browser. Any suggestions?

-My hard drive failed.
-I was able to restore my files from an external hard drive.
-My bookmarks are saved to a folder on my new hard drive.
-I am not able to import them from this folder on my hard drive into Firefox.
- the only option Firefox offers for importing bookmarks is to import them from another browser...is there another way?

In Firefox the bookmarks are saved in a database file called places.sqlite in the profile folder. If you have got this file from the external hard drive you can restore the bookmarks by copying this file to your current profile folder. For details of the location of the profile folder see either https://support.mozilla.com/kb/Profiles or http://kb.mozillazine.org/Profile_folder_-_Firefox

Not able to import business system in Integration Directory

Dear all,
Currently i involved in XI system copy. As per the standard documetn i have finsihed the initial activites like EXPORT and import of abap and java files is succedded.
Now in the post instalaltion activites.
I have changed the exchange profile parameter
SLD connection.
And other post installation activites succesfully.
But I am not able to import the business system in Integration director. It throws an error by mentioning.
*Access to object list of type business system using the internalEOA service business system accessor failed *
Here we are maintaing a central SLD and hence i created the service users with specific roles.
SLDcheck is working fine and it dispalying the businees system as well.
I confirmed that the user and password are same in XI and SLD system,
But in SLD I am not able to see the domain under web as Exchagne Infrastructure alonng with the componets. I have tried to registerd the same using the note 761476 but in vain. After the changes i restarted the machin and checked the domain status in SLD technical system under exchagne Inffrastructure its not working.
Is this the problem or am i missing out somewhere?
FYI: The users are not locked.
Kindly suggest me and it will be greatful if i get immediate reply.
Thanks and regards
Vijay kumar G

Hi Vijay,
It looks like the problem is with the SLD.
Did you delete the SAP ABAP and Java technical system and business systems and recreate them in the central SLD? If this was the case, then you may not be able to import them into your integration directory anymore, as the GUID of the new technical systems and business systems are not the same with the previous one.
Why not tried to recopy the SLD again, and this time do not change the technical and business systems. If the reregistration of these systems are not avoidable, then you will have to open up the copied IR for configuration.
Regards,
Lim...

Not able to view layout in Enhance planning layout UPX_MNTN

I have created a new layout in BPS0 . In the planning level, i have included User exit variable.
I selected the planning area in UPX_MNTN. However in Enhance planning layout, i could not see the layout, i had created in BPS0.
Do i need to do any other settings to view in UPX_MNTN ?

HI Ravindra,
          I was in the same boat. I had assigned an exit variable in one of the layout. It was not able to execute the layout till runtime, and that is the reason it doesn't come to Planning services.
        In short, planning services will show when all your variable values are getting populated before layput execution.
        I have another issue, where I want to populate brand based on selected products from CRM. I am unable to accomplish this. Please let me know, if you get any response.
Thanks and Regards,
Harpal

I wonder how pro photographers use aperture?I shoot raw and my harddrive is alreay full.I'm not able to import new pictures.Is it ok if i create a vault and delete all my projects in the HD.Can I use an external HD use aperture through the vault??

I wonder how pro photographers use aperture?I shoot raw and my harddrive is alreay full.I'm not able to import new pictures. I don't know what to do. I created a vault. My plan was to create a vault(put all my master files into an external harddrive) and then delete all my projects in my mac pro's harddrive. Is it the correct way to do it ? What should I do if I have thousands of raw files ? How should my workflow be? Can I use an external HD and use aperture through the vault,without keeping the master files on my computer's hard drive?? Or should I shoot raw+jpeg and store raw files in an external backup harddrive and import only jpegs into my aperture library?

There's a bit to learn. It will slowly make sense.
Aperture is an empty field. You're given a tractor and a whole bunch of attachments. What you grow, how, and where, is entirely up to you.
Vaults are for back-up and only for back-up. They have nothing to do with storing your working files.
When your Library outgrows your system drive (and for good performance, you should leave c. 20% of every drive empty), it's time to convert some of your image's Masters from Managed to Referenced. ("Managed" and "Referenced" refer to Masters, not to Libraries.)
There are hundreds of posts in the forum, and several pages in the User Manual on using Masters.
Many people run Aperture with the Library on their system disk, and most (or all) of their images' Masters on external FW drives. This is a good set-up. Note that you will likely have to take steps to back-up the data on your external drives.
If you do the above, there should be no reason to delete any Projects.
The choice of RAW or RAW+JPEG or JPEG depends on the kind of work you are doing. I capture RAW only -- but I don't do any commercial shoots. Pros on deadlines report that the RAW+JPEG works well for them. Capture JPEG if it saves you time. IMHO, there is not a good reason to shoot JPEG to save space (space is cheap; time expensive).
Short-term solution: buy and use a FW800 external 1 TB drive, formatted "Mac OS Extended (Journaled)", and using Aperture relocate the Masters of all images older than 30 days to that drive. (Be sure to change your back-up strategy to include this new drive; you may need a second new drive.)
This general post of mine might help you understand more about Aperture.

Garageband was not able to install the new sounds

I'm on an iMac 21.5-inch (mid 2011) running Yosemite; 2.5 GHz Intel Core i5; 4GB memory.
A few months ago, I uninstalled GarageBand. Now I'm trying to reinstall it. I can get GarageBand 6 reinstalled, but I would like to get working with the latest version. I'm able to download the latest version from the App Store with no issue. It installs with no issue.
When I open it, it thanks for me downloading it, and then begins to download "an essential collection of sounds and loops." After a bit of downloading, it asks for my admin password; I enter it, and a few seconds later, it gives the error: "GarageBand was not able to install the new sounds. Close and re-open GarageBand to download and install them again." Closing and reopening GarageBand just takes me through the same loop (no pun intended). When the window is open, if I click on the GarageBand menu in the Apple bar, nothing happens.
It does not ask me to accept anything; I am signed into the App Store with the same Apple ID I have always used (it is the only one I have ever had, so that's not the issue). I am an admin on my Mac, so it's not a permissions issue. It's not a password issue either.
Things I have tried:
Rebooting into Safe Boot and opening from there; same issue.
Repaired permissions (it fixed oodles of things completely unrelated to GarageBand); same issue.
Creating a new admin profile and opening from there; it gives a different error, but the effect is the same.
Removed the program, trashed anything remotely related to GarageBand (preferences, folders, etc), emptied the trash, restarted the computer, reinstalled; same issue.
Installed GarageBand on top of itself, just in case; same issue.
I can't think of what else to try. Help!
For reference, here is a screenshot of what I'm getting stuck on:

The solution Lijoesat posted above worked for me!
First I found the private/var/folders/ (and then lots of gibberish folders) and singled out two garageband files and deleted them. This did not work.
I then deleted everything which may or may not be a good thing, I am an idiot, I have no idea if these are extremely important files or not!
I tried to empty the trash bin after but many files was locked and Garageband would still not install.
I did a restart of the computer, emptied the bin successfully and tried to install Garageband again and it worked fine!
The inserted picture show some of the folder structure, I deleted everything after private/var/folders/

Interview questions on XI-- where i was not able to answer

Hi XI Experts
 Recently i attended interview for XI...these are the following questions i was not able to answer pls...help on this
Q's are
1) Is the BPM must start with receive step ? why? or i can start with any step ?
 Explain me in detail ?
2) how to set up the Adapter Specific Parameters ? Where ? Why ? explain
3) Can you write the java mapping for creating the dynamically new id for new
 employ automatically ?
4) How to upgrade the XI 3.0 form sp 17 to sp 19? step by step expalin in detail?
5) How you will check the XI performance ? what should you do on that if
 performance is low? explain indetail ?
These are the some of the questions very i was not able to answer properly
I hope u experts can help me on this
Adv thanks and regards to all
Kiran LVS

>> Is the BPM must start with receive step ? why? or i can start with any step ?
Not necessarily. If receive is not your first step, it should be the first step with in a loop. Means a loop can be the first step.
From SAP help : Insert the receive step to start a process as the first step of the process or as the first step of a fork, a block, or a loop
But since the receive step starts the IP, it should be present with in the loop as the first step.
>>) how to set up the Adapter Specific Parameters ? Where ? Why ? explain
Sender cc -->ID. Check the check box "Adapter specifc Identifiers"
>>How to upgrade the XI 3.0 form sp 17 to sp 19? step by step expalin in detail?
I guess this is more of a Tech consultant's job than a Developers'.
>>Performace?
You can use the Performance monitoring option in RWB. If you find the performance too low, you can check for any running BPM instances(for days with out proper correlation) and end them. Try increasing the throughput ie. if a large amount of data is processed over a small time and the rest of the time your XI is idle. You can try to minimize such conditions.
Regards,
Jai Shankar
Message was edited by:
 Jai Shankar

Wanting to use Photoshop CS6 to open images directly from iPhoto 11. Using OSX10.8.2 and iPhoto 11. Just installed Photoshop CS6 and want to open images directly from iPhoto. Before I installed PS I was not able to edit photos in iPhoto 11. Nothing

Wanting to use Photoshop CS6 to open images directly from iPhoto 11.
Using OSX10.8.2 and iPhoto 11. Just installed Photoshop CS6 and want to open
images directly from iPhoto. Before I installed PS I was not able to edit photos
in iPhoto 11. Nothing happens when I click on ‘edit‘ it is blank.
And now it will not work using Photoshop CS6 either.
From Help Center I have gone to iPhoto/Preferences/ Advanced and chosen Photoshop CS6 to Edit Photos but then cannot find an 'Open' to click? Perhaps this is the problem?
When I select a photo in iPhoto and click the Edit button - nothing happens.
Please advise. Glenys

This may be of help to you:
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT

Not able to import canon raw CR2 photos direct from a camera into Lightroom 5.5

I’ve just purchased Lightroom 5 and updated it with the latest version 5.5, and I am running windows 7. Everything appears to be working fine, however I am not able to import Canon CR2 raw files directly from my camera. Importing JPEG files directly from camera works fine, however Lightroom can not find any CR2 raw files?
If I copy the raw files through the Canon utility tool on to my hard drive, it appears I am then able to import into my Lightroom catalogue, as Lightroom is then able to see these files on my hard drive. However why can not Lightroom see these files on my Canon 450D camera and import directly from there in Lightroom?
Are there any setting or preference I need to change to be able to do this?

Are you able to import 450D raw files into LR5.5via USB connection and are you on Windows 7/8?
I agree with your observations concerning SD vs CF card fragility, but they also have a limited number of insertions before failure.
http://en.wikipedia.org/wiki/USB#Durability
The newer Micro-USB receptacles are designed for up to 10,000 cycles of insertion and removal between the receptacle and plug, compared to 1,500 for the standard USB and 5,000 for the Mini-USB receptacle. This is accomplished by adding a locking device and by moving the leaf-spring connector from the jack to the plug, so that the most-stressed part is on the cable side of the connection. This change was made so that the connector on the less expensive cable would bear the most wear instead of the more expensive micro-USB device.
All my Canon cameras have micro-USB connectors. With one (1) insertion and removal per day that equals 10,000 days, or about 27 years before end-of-life! SD and CF cards are also rated at ~10,000 insertion and removals, but more prone to damage from static electricity and handling due to the exposed contacts and fragility of CF card sockets.
So there's no real advantage from the camera wear perspective to using a card reader. I'd say use whatever method is easiest for your workflow, but handle memory cards with care and avoid exposing them to static discharge. Ground yourself to something metal before removing memory cards and inserting them into the card reader, especially in cold Winter months.
BTW- I helped design one of the first semiconductor DRAM memory systems back in 1970. We killed more memory chips than I care to count before we discovered they were easily damaged by static electricity. Today's ICs have built-in protection, but you can still damage them with a big enough static ZAP!

1st-I was able to log into my account but was not able to open any applications, tried another account and same thing. was able to log out and restart but now am unable to use mouse. g5 dual core

1st-I was able to log into my account but was not able to open any applications, tried another account and same thing. was able to log out and restart but now am unable to use mouse. g5 dual core, can't remember the os without seeing it.

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Let us know how far you get, or results.

IMovie NOT able to import Sanyo HD1010 files ?

I want to know about what types of files format are supported by iMovie 09
Sanyo HD1010 Camcorder encoding format:
MPEG-4
1920x1080
H.264, AAC
That was shown in Info dialog in Mac OS X.
But iMovie seems not able to import.
I choose File > Import > Movie, and I select all movies I want to import.
Import Setting:
Large - 960x540
Copy files
And it goes to
Converting 1080i Movies
Processing Event: Christmas
||||||||||||||||||||||-------------
Time remaining: less than a minute
And it comes up nothing
It created a event at the bottom. But no movies was shown there.
iMovie not supporting that file format ?
What movie format it support ?
Is there any convertor that I can use ?

In Streamclip, drag your clips into the window. Then select File/Export To QuickTIme.
For Compression, select Apple Intermediate Codec.
For frame size, use the same as the frame size of your camera.
You may want to deinterlace the video, but you can try it interlaced and deinterlaced and see which one you like the best. You can test this with a short clip.
To test, import the AIC into iMovie, and then drag the clip into a project. Share the project in the format or formats you want to use (for example, h.264 for web, iPhone, or iTunes. Use Share to iDVD to make a DVD. Then see which one looks the best.
(In Streamclip, you can easily make a short clip by using I to set the in point and O to set the out point. This is nondestructive to the original clip that you dragged in.)

NwSapSetup was not able to grant you administrator rights

Hello
I have configured Local Security Handling on our SAP installation server (v 8.6.1.54), which configured fine, and I have added the account used for this as an administrator on a test client PC.
When I try to install the SAP GUI 7.2 patch level 6 package from the installation server share, with a user that does not have local admin privileges, the following error occurs:
NwSapSetup was not able to grant you administrator rights, either because:
- the distribution service didn't respond
- the installation service couldn't be started
- the logon credentials for the installation service are incorrect
Please contact your system administrator
Any ideas?
Thanks
UPDATE:
The log files on the server are giving me a clue as to why this is failing:
14:56:20 NwSapFeiUt 1 Trying to make user >LSHUser< local Admin of >TEST-LAP<
14:56:41 NwSapFeiUt 1E Could not make user member of local admins Error message: The RPC server is unavailable. Error code 0x000006ba (1722).
14:56:41 NwSapFeiUt 1 ERROR! Can not make the user cciservicesap a member of the local admins group of the wksta GBH-LAP-037
So I've found the problem it seems...but why it has to try making LSHUser a local admin, when it is already an admin on that machine, I don't know!
Edited by: J. Walton on Aug 12, 2011 3:43 PM
Edited by: J. Walton on Aug 12, 2011 4:01 PM

I restarted the server that contains the SAP installation files, and the installation on the client still fails, however the log files look different.
I am now seeing "User is already a admin on this wksta" - which is good.
But underneath that:
"09:17:08 NwSapFeiUt 1E Installation service : failed to start service Error message: The stub received bad data. Error code 0x000006f7 (1783)."
A quick Google suggests this could be because there are too many services running on the client laptop, and that I should uninstall some!

I did everything lllaass suggested and removed most of the itunes related components, but when I tried to remove itunes, I got the message, "The feature you are trying to use is on a network resource that is unavailable" so I was not able to uninstall it.

I did everything lllaass suggested and removed most of the itunes related components, but when I tried to remove itunes, I got the message, "The feature you are trying to use is on a network resource that is unavailable" so I was not able to uninstall it.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

SAP B1 was not able to import layout/report.

Similar Messages

Maybe you are looking for