SAP Banking - Issue with Bank statement

Hi
We are using Banking Services from SAP 6.0. In Account management I am able to create the bank statement and can view in the Bank statement history that the bank statement has been created. However when I double click the bank statement I want to view (in the ALV Grid)I get an error message which reads "FUNCTION DOUBLE_CLICK HAS NOT BEEN IMPLEMENTED YET". Message information
Application Area >6
Message no 501.
Any help on this issue will be appreciated
Thanks
Ramesh

Hi,
Given the situation I think its a technical problem rather than a functional and for this you would need help from your basis team. Check the version history of SAP banking and apply the patches if required be.
Regards,
Abhinav Sethi
Feedback is most welcomed!

Similar Messages

Issue with Bank details infotype,

Dear Experts,
I have an issue from the client.
An employee was hired as trainee in last year on 1year trainee period. In month of March his trainee period was over and separation action was performed on same.
He was hired in system as permanent employee with new employee code from April month.
But when clients are entering bank details within Bank details infotype, his data is replacing old Bank details infotype.
So is it possible to stop folwing data from new IT09 to old IT09 and without delimiting the old IT09.
regards,
Surekha

Surekha:
I do agree with sikindar, actually your issue is in confussion....
Wat exactly you want and first of all y your terminating employee in between his service period, your thing is employee got permanent from trainee position, so for this you need to run the confirmation action rather seperating this employee and hiring another employee with a fresh employee code....
so Pls tell us wat exactly you want to and wat exact problem your facing in IT0009.
Regards,
TATA

Issue with Bank adderss

Hi
We have requirement that bank address from Bank application (ESS) should not get updated in info type 9. The reason behind this is country and region is taken from info type 6 by default. When user updates main bank details from portal, then bank address and region might be mismatch.
Now we need that add only bank key in info type 9. It should not change the adderss at all.
But here we have time constraints so that we can not change function module or application.
If anyone have workaround to achieve this (pass only bank key in IT 9), please give your inputs if you have done?
Or If any user exit where and how it can be done?
Or SPRO setting to change application or badi?
-Yogesh

I believe its the standard feature based on the bank key selection, the address of the bank gets updated (I think ur referring to Stars field or some thing like that.)
If you want to change this behavior you can do the NWDS code change (in onEvent check the event and then make the field blank or as required ) or thought the badis.
Try the badi way as suggested by Sidh.

Has anybody had an issue with System State Backups on a Dell PowerEdge R510 Server running Server 2008 R2?

Hi,
We have recently had issues running system state backups on our 2008 R2 Domain Controllers.  They are running on Dell PowerEdge R510 Physical Hardware. Whenever you initiate a system state backup, the Domain Controller becomes unresponsive
forcing us to physically reboot it.   Nothing in the Event logs or the Dell Open Management Hardware Software indicates issues with Phyiscal disks but we can always replicate the issue by starting the system state backup.
The system state backup is initialted as a batch file that runs as a scheduled task.   the commands run are as follows:
WBADMIN START SYSTEMSTATEBACKUP -backupTarget:[drive letter] -quiet
We have 4 Domain Controllers with identical disk configurations. When the DCs were setup I confirmed the system state backups were working but the issue started occuring sometime in Dec 2014. We are going to run the Dell Hardware Update Utility
to update the RAID, BIOS, Firmware updates but Has anyone experienced a similar issue that may have been triggerd by a Microsoft Patch?
Thanks,
Kevin C.
kconway@fnalgov

Hi Kevin,
This issue could be due to the Mountmgr.sys driver incorrectly maintains a global mutex. This behavior causes a deadlock situation in the Mountmgr.sys driver.
Please install the hotfix in the article below to resolve the issue:
A computer stops responding because of a deadlock situation in the Mountmgr.sys driver in running Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2614892
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Issue with active state on navigation of vertical slide website. Please help!

Hey guys!
I'm using the Adtile vertical-slide example at http://www.adtile.me/fixed-nav/ and am having some issues with the navigation...
When I add nav buttons for external pages, the navigation active state doesn't follow through the menu to the active slide (it does on the external pages as I'm using a separate css selector PHP script though). Without the additional buttons for the external pages they work fine.
Here's the link to the working example WITHOUT the additional buttons for external pages.
Here's the link for the page WITH the additional buttons for external pages.
Does anyone know how I can get the active state to work for the slides section of the website?
Thank you!
SM

Try this:
.nav-collapse a:hover,
.nav-collapse a:active,
.nav-collapse a:focus {
background: #e8e8e8;
Nancy O.

Sap treasury integration with Bank Customer Accounts

Hi,
My client is implementing bank customer accounts.
The client requirement is to integrate treasury with the Bank Customer Accounts
What are the steps to be configured?
Please advice
with regards
raju

I didn't work with BCA, but
Here you can read about BCA interfaces: Interfaces of Bank Customer Accounts - SAP Library
From TRM side you can use:
badi TPM_EXT_PAYMENT_TRPR - allows you to pay via a different payment program
IMG -> Financial Supply Chain Management -> Treasury and Risk Management -> Transaction Manager -> General Settings -> Transaction Management -> External Link -> ...
By means of the badi BADI_TPM_PAYMENT_INFO_TRTF that is contained in the enhancement spot EP_TPM_TRANSFER_TRTF,you can supplement the payment information for transfers.
If you tell use a little bit more, we will try to help you. For example, what processes you want to integration, what parameters, etc?
Message was edited by: Grigoriy Babitskiy

SAP Sourcing 7.0 integration with SAP ERP - issue with SAP PI

Hi All,
We are integrating SAP Sourcing 7.0 with SAP ERP 6.0 with SAP PI 7.1 in middle. So the Sourcing will talk to PI and this intern will talk to ERP. Sourcing is on oracle 11g where as PI and ERP are on SQL 2008. All these 3 are on windows 2003 x64.
We are following the "Configuration Guide Integration of SAP ERP and SAP Sourcing 7.0" provided by SAP.
We have successfully configured Sourcing and PI systems as pe the document. In Sourcing, by using background jobs we are able to successfully generate files in "export" folder which is part of FTP directory.
However the issue is with PI, we configured the "configuration scenerio" in Integration builder and point all channels to the FTP folder in Sourcing. But PI is not picking up these files.
Is there any way to trigger this in PI system. Or do we need to do anything in sourcing itself.
Regards,
Siva.

Hello Siva,
I am thinking that you may need to deploy FTP adapter in PI to get this process work fine but not sure.
Let's see what other experts suggest.
Thanks,
Siva Kumar

Web logic 12.1.3 issue with calllable statements

Hi All,
I have installed weblogic 12.1.3 and working with java 1.8. I'm encountering the following error in logs (snippet of the error) -
java.lang.NullPointerException
at oracle.jdbc.driver.DynamicByteArray.next(DynamicByteArray.java:817)
at oracle.jdbc.driver.DynamicByteArray.getStringFromAL32UTF8(DynamicByteArray.java:1066)
at oracle.jdbc.driver.DynamicByteArray.getString(DynamicByteArray.java:662)
at oracle.jdbc.driver.CharCommonAccessor.getString(CharCommonAccessor.java:352)
at oracle.jdbc.driver.OracleCallableStatement.getString(OracleCallableStatement.java:661)
at oracle.jdbc.driver.OracleCallableStatementWrapper.getString(OracleCallableStatementWrapper.java:860)
at weblogic.jdbc.wrapper.CallableStatement_oracle_jdbc_driver_OracleCallableStatementWrapper.getString(Unknown Source)
at com.gxs.ncm.mvc.model.persistence.dao.LoginDAO.getProgramStatusInfo(LoginDAO.java:329)
Not Sure why callable statement is failing.
There was no changes done to the setup and the application was working fine on Weblogic 10.3.4 and Java 1.6.
Kindly assist in having to resolve the issue.

Please see previous threads which cover the same topic -- https://community.oracle.com/search.jspa?q=huge+archivelogs
Concurrent Processing - How to Find Database Session & Process Associated with a Concurrent Program Which is Currently Running. (Doc ID 735119.1)
Thanks,
Hussein

Issue with case statement

100*ifnull(x,1)/case when ifnull(yagox,1)=0 then 1 else yagox end)
based on above condition my result should be like below
99.8
101.1
99.4
97.7
Current displaying result like below
99.8
1,22,345,000
99.4
97.7
2,34,567,400
i need to display those two values also in %
it may be happen denominater(yagox value is 1)
could please give the proper case statement for resolving the issue
betham
Edited by: 961992 on Oct 22, 2012 10:15 PM

Dear betham,
welcome to the forum, could you please share the table structure and some sample data and also what your select statement is. This will help people come up with solution faster and also it would avoid going in loops.

STILL having issues with Usage Stats

My usage stats STILL do not reset after I fully charge my iPhone (regardless of whether or not it is plugged into the wall or my computer). What is the deal? The only time they have reset is when I have reset the phone itself (that was about all the advice tech support had for me).
This isn't a huge issue, the life of my battery seems normal to me. It is however a useful feature if it were to work properly, and being as how I paid $600 for my iPhone I would like all of its features to work.
Has anyone else figured out how to resolve this issue? It is not convenient for me to go to an Apple store, so I would like to try to avoid that if possible.
Thanks!

I don't know if this will help you or not, but I have had a couple of weird things happen to me on this subject as well. I found that my stats would not reset when using the wall outlet to charge the iPhone. Also if I used the docking station to charge it with the iPhone OFF completely, it wouldn't reset until I put it back into the docking station after I had turned the iPhone back on. I didn't check to see if the result would be the same with the wall charger option. I hope this helps.

SAP GUI issue with Portal on Windows Vista

Hello. I am using Windows Vista on my laptop. We use the portal to access our SAP systems. I have SAP GUI 7.1 installed on my machine. When I click my WIN GUI link from inside the portal I get a download file request. I download the file, however I have to click on the WIN GUI link a second time for the GUI to actually open I am using IE 7.0 as well.
Please advise if you know how to resolve this issue.
Thanks,
Stuart

try installing patch 5 for SAPGUI from ftp://ftp.sap.com/pub/sapgui/win/710/patches/

Issue with WRITE statement from Internal Table

Hi All,
I have written the below code in a infoset query, the syntax check is ok & when i run the query in debugging mode, i find the internal table being filled with the values & the write statement outputing the values as well.
But the problem is when i execute the query the output does not show all the lines, instead just displays the last record . What could be the mistake?
Is it because i have defined Y_EBELN, Y_EBELP & Y_OPENQTY as nodes in the Extras Tab of the infoset & have chosen this for display in my query? How to display the output from my internal table in my query output?
Hope my problem is clear, await clarification.
Vivek
Code
types:
    Begin of itab,
      wl_ebeln   type eket-ebeln,
      wl_ebelp   type eket-ebelp,
      wl_openqty type eket-menge,
    End of itab.
Data: il_po type table of itab with header line.
*Display open PO for materials
SELECT EKETEBELN EKETEBELP EKETMENGE EKETWEMNG EKET~EINDT
     INTO (Y_EBELN, Y_EBELP, WL_MENGE, WL_WEMNG, Y_EINDT)
    FROM EKET
      INNER JOIN EKPO
         ON EKETEBELN     = EKPOEBELN
          AND EKETEBELP = EKPOEBELP
      INNER JOIN MARD
         ON EKPOMATNR     = MARDMATNR
          AND EKPOWERKS = MARDWERKS
          AND EKPOLGORT = MARDLGORT
    WHERE EKPO~MATNR = MARD-MATNR
      AND EKPO~WERKS = MARD-WERKS
      AND EKPO~LGORT = MARD-LGORT
      AND EKPO~LOEKZ = SPACE
      AND EKPO~ELIKZ = SPACE.
*Display only still open qty per schedule line
Y_OPENQTY = WL_MENGE - WL_WEMNG.
il_po-wl_ebeln = Y_EBELN.
il_po-wl_ebelp = Y_EBELP.
il_po-wl_openqty = Y_OPENQTY.
    append il_po.
ENDSELECT.
ENDIF.
Loop at il_po.
write:/ il_po-wl_ebeln, il_po-wl_ebelp, il_po-wl_openqty.
endloop.

Hi Vivek,
Try it like this.
Data: Begin of itab,
       lifnr type lfa1-lifnr,
       name1 type lfa1-name1,
       land1 type lfa1-land1,
      End of itab,
      it_lfa1 like table of itab with header line,
      lifnr like lfa1-lifnr,
      name1 like lfa1-name1,
      land1 like lfa1-land1.
select lifnr name1 land1 into (lifnr, name1, land1)
       from lfa1.
it_lfa1-lifnr = lifnr.
it_lfa1-name1 = name1.
it_lfa1-land1 = land1.
append it_lfa1.
endselect.
loop at it_lfa1.
write:/ it_lfa1-lifnr, it_lfa1-name1, it_lfa1-land1.
endloop.
Note:
In place of the above select you insert your join select statement. It is working for me.
You have declared your internal table wrongly. In the internal table instead of TYPE use LIKE, it will work.
Hope this will work for you.
Thanks & Regards
Haritha.

Issue with read statement with one more key missing in mapping

Hi All ,
I have such data in two internals table :
IT_bdc
vbeln            posnr
90000593     10
90000576     10
90000672     10
90000672     20
90000672     30
it_konv
kbetr          vbeln
6250          90000576
12160000          90000593
500000          90000672
600000          90000672
700000          90000672
My current program statement is :
LOOP AT it_bdc.
READ TABLE it_konv WITH KEY
      vbeln = it_bdocs-vbeln.
currency =   it_konv-waers.
endloop.
as you can see the posnr is missing in it_konv how can i modify this read statement so
that vbeln posnr from it_bdc should get correct kbetr from it_konv.
Kindly help in this mapping.

Hi
sort it_konv by vbeln
then
loop at it_bdc.
read table it_konv with key vbeln = it_bdc-vbeln binary search.
if sy-subrc = 0.
perform your logic/task.
endif.
endloop.
also it depends what you want to do after reading it_konv.
in my logic if there is a vbeln in it_konv which s present in it_bdc then sy-subrc will be 0
and you can perform your logic.
and if there will be no matching vbeln in it_konv then sy-subrc will not be 0.
check the values in debugging.
Thanks
Lalit

Issue with DML statements in production

Hi all ,
We are using Oracle 11g. The issue is the following:
We have to load some tables during the working day by selecting the data we need from another sources/schemas / and then to insert that data into the production environement.
The problem is that the source tables are very big/about 10 milion rows/ and while we are trying to get that data /select/ and then process it /insert/ into the PROD we may crash the system.../It's just an assumption/. Even without using cursors or bulk operation but simple inserts we may overload it...
Any ideas what options do we have? For example to process the data by portions ? But how?
Thanks in advance,
Alexander.

a.stoyanov wrote:
Hi,
Thanks for reply.
Because the logic for inserting the data it's not so simple, we are not sure the pure SQL can satisfy the conditions how the data has to be loaded. Is there a way to process for example 10 000 rows then do something like sleep and then get another 10 000 rows and so on...? By this approach i think we are not going to overload the system with queries .. but how to achieve this or there is a better way?
Thanks in advance,
Alexander.Actually, it's more likely to increase the workload on the server doing it in batches of records, especially if you plan on committing each batch, which would then also introduce transactional issues if something fails as well as the technical issues of potentially causing the server to start up more writer processes. Multiple queries are a heavier workload on the server than fewer queries.
Is the process you are doing really something that cannot be done in SQL? In a lot of cases SQL is perfectly capable of doing whatever processing is necessary.
You'd have to give us an example of why you feel you need to do it in batches and why the processing can't be done directly in SQL.

Sap transaction issue with CJR2 - not authorized

Hi,
One user trying to execute CJR2 and he is filling all the details. But when going to other screen he is selecting PLAN details it is showing you are not authorized. In SU53 that auth object checked is not under that transaction under that role he is executing.
Can any one help what are all to check or need to run trace?
Thanks
Edited by: Julius Bussche on Jul 20, 2009 12:29 AM
Please use meaningfull subject titles

Please list down the Objects which have got RC (return code) not equal to 0 (zero). These are the Objects those take heads up.
Now coming into your provided list ... all are coming w/ C/M as SAP proposal.
Check/maintain C_PROJ_TCD PS: Transaction-Specific Authorizations in Project System
Check/maintain K_CSKB_PLA CO-CCA: Cost Element Planning
So you already have them in the role where the Tcode is present. Please check the field values required from the values checked in the Trace if these Objects also got RCu22600. And provide the values accordingly.
Let me know if you have further issues.
Regards,
Dipanjan

SAP Banking - Issue with Bank statement

Similar Messages

Maybe you are looking for