SAP Basis Query related to accesing of zprograms

Hi
  How can I get the time and date of the Z programs accessed till date.
Is there any tcode for the same or any table where this data is stored.We have used the tcode sm20,st03,sm19,stad but we did not get desired output.
Regards,
Milind

Hello Renuka,
Here there was a question...?
Will you please help me on this.....
Actually recently I have installed ECC 6.0 in Redhat 5.0....
After that I have started both lsnrctrl and sap start up. After that I am able logon sap gui but while I am trying to login as ddic or sap* it showing error. It's not even allowing any login account after few attempts. It's showing one error ZDATE_ILLEGAL_LOCTIME is mismatched with local server. I have changed time and date os level and application level but still I am not able to login. Please help me on this.

Similar Messages

  • SAP Basis Query Related to profile generation.

    Hi,
      When we add a tcode to any role or make any authorization changes then how many times the profile gets generated and where does it have its effect in tables?
    Regards,
    Milind

    Hi
    When ever we create a new role we need to generate a new profile and when ever we makes any changes to a role by adding any new tcode to any existing role or any authorization changes to that role then each and every time any changes are made we need to generate a profile which will add that particular changes to the previous profile so we can say that as many changes we made we need(must) generate a profile .
    Tables affected in creating a role or making any changes in authorization are many and that depends on what kind of a role(like if we generate a composite role the the table is AGR_AGRS,..etc profiles of each role is stored in AGR_PROF..etc..) if we make any changes to any authorization values then diff tables are effected(if u make any changes in org values the table effected is AGR_1252...etc)

  • Sap basis related qries

    Dear gurus,
    Where can i find sap basis related qries ?
    Regards
    R.Rajendran

    HI
    According to me SAP Basis related queries is really widespread here.
    it is all depond upon your Basis Query.
    for example :
    1) if you have query regarding database then
    Expert Forums  » Database & OS Platforms
    2)if you are working with solution manager and you are facing a issue related with Basis area then you can post here
    3)If you have general administration query then you can post in
    *Expert Forums  » SAP NetWeaver  » SAP NetWeaver Administrator *
    sometimes you may need to approach Security forum for security related issues (again a part of basis)
    So it is purely deponds upon your type of your query
    Regards,
    Vijay.

  • Queries related to sap Basis.

    Dear  All
                     Can any body tell me queries related to sap Basis.
                     Which data sources need to be installed and what are the cubes and dso's  which gives information related to SAP BASIS.

    Hi,
    It might not be installed in ur system Thats y u are unable to find.
    Goto rsa1->BI Content ->Infoproviders by infoareas....There u shall find 0DBH infoarea. It is Database performance.
    In my client Basis people are using some of the cubes from this infoarea.
    But datasources are generic.
    Hope this helps.
    Regards,
    Guru

  • Query related to SAP

    I have a query relating to SAP, specifically when using the Create New Session button. In the past when using this button, it has always created a new SAP session with the window displaying the SAP Easy Access  User Menu... front end, with all my favourite transactions listed. However, recently this user menu has disappeared and the window is blank, meaning I have to type the transaction in the top left box, which, whilst not preventing use, is a little annoying and awkward!
    I dont believe I have changed any options recently and can find no settings that look like they would bring the user menu back but it would be really useful if it did! (It is probably worth mentioning that this only occurs when creating a new session; when starting a new SAP session in the first instance, the user menu appears...)
    Please help me out
    Many Thanks,
    Sunny

    Hi,
    SAP GUI version - 7.10
    i am using a desktop, tried logging in another desktop ,same problem.
    Recently there is a HARDWARE migration occured , might be this also effects the settings ?
    please Advise.
    Sunny

  • Under which group i have to post issues related to SAP - Basis

    Hello All,
    Can some one tell me
    Under which group i have to post issues related to SAP - Basis
    Thanks
    Balaji

    Hi,
    As such there is forum which is dedicated to basis. But there are number of forum where you can post issues depending upon what type of issue you have e.g.
    If you have issue related to database then you can post in SAP on Oracle, SAP on DB6, SAP on MaxDB etc.
    If it is related to OS then SAP on Unix, SAP on window etc.
    If it is related to ERP/EHP upgrade then SAP ERP 6.0 upgrade, Enhancement Package installation.
    If its related to netweaver then on SAP Netweaver administrator, SAP netweaver platform.
    Thanks
    Sunny

  • What is BC SET in SAP BASIS related to SAP Security.....................

    Hi All,
    Please explain me what is BC SET in SAP Basis which is related to SAP Security.
    Can anyone explain in detail...
    Thanks Much.
    Swapna.D

    Hi
    Prerequisites
    You want to create a BC Set from a transport request. A transport request containing Customizing data must already exist.
    This Customizing request is a change request with which you can copy and transport the changed system settings.
    The BC Set is based on the data in the Customizing request. You can copy all the data records in the Customizing request into the BC Set, or select a subset.
    You can subsequently edit BC Sets created from transport requests.
    Procedure
    Enter the Customizing request number and Continue.
    You can search for requests with the F4 help. The request type is Workbench/Customizing requests. The request status is changeable or released.
    You get an overview of the transport objects in the transport request. To put a transport object in the BC Set, flag the row Copy.
    The Status column tells you the BC Set-compatibility of the transport object. It can have the following values:
    ·        green traffic light: The transport object can be put in the BC Set.
    ·        yellow traffic light: BC Set creation or activation problems are possible. Check whether all data records have been put in the BC Set, after you create it.
    ·        red traffic light: Table entries exist, but they cannot be interpreted. They cannot be put in the BC Set.
    ·        Cancel: The transport object cannot be interpreted or put in the BC Set.

  • Mapping relation from sap bw query to crystal report

    Hello Gurus,
            will you please describe mapping relation for following items from sap bw query to crystal report? it is better to provide a instance for each one.
               (1) character   (2) key figure  (3) navigation attribute  (4) display attribute (5) charater with hiararchy
    Many thanks

    This blog may be helpful:
    /people/ingo.hilgefort/blog/2008/10/03/businessobjects-and-sap-part-1-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi

  • " QUERY   REGARDING SAP - BASIS"

    What is the Configuration Required to Configure  SAP-BASIS
    E .C .C   6.0 in a System??
    What are the Hardware Requirement's for Configuring SAP-BASIS in  a P.C??
    What is the Time Required for Configuring  SAP-BASIS 6.0 ECC Version in a  computer ???

    Hi there,
    As rightly said installation of  SAP ECC 6.0 on windows server (OS -32Bit or 64 Bit) requires minimum 200 GB disk space in which u will create the Files system & also Requires 2-4 GB RAM for better performance
    I have done installation on AIX & Windows server which requires minimum that kind of resource.
    Please start  the prerequisite checks before installation of any system in any os which will help a lot .
    Also follow the PAM(Product Availability Matrix) Link on sap help portal which will provide the suitable software & hardware help to u before installation.
    Pam link - http://scn.sap.com/pam
    Hope I answered your question.
    get back if u require further assistance.

  • Can somebody suggest a good sap basis  book

    can somebody suggest a good sap basis  book

    I would recommend following books for your query -
    1. Sap Basis Administration Handbook,NetWeaver Edition by  Ranjit Mereddy
    2.  Basis Administration for SAP by Robert E. Parkinson and Johan Marneweck
    3. SAP Certification material  - TADM 10 and 12.
    4. For java side knowledge, you can go for TADM 200.
    5. Sap R/3 for Everyone: Step-by-step Instructions, Practical Advice by Jim Mazzullo, Peter Wheatley
    6. help.sap.com - Here you will get everything related to SAP Basis.
    Hope this answers your query.
    Regards,
    Ashutosh Shukla

  • Prompt List of Values in WebI - SAP BI Variable - SAP BI Query -BI Infoset

    Hi,
    We have a Multiprovider built on an Infoset. SAP BI Infoset is built using 2 DSOs.
    There is a SAP BI Query on top of this Multiprovider.
    Multiple-Single Values type Optional Variables are created for some of the Objects of this SAP BI Query.
    Universe is created on top of this SAP BI Query, using SAP Integration kit.
    WebI is created on top of this Universe.
    Prompts are created on some of the Universe Objects, for the WebI report.
    We are facing a typical problem.
    When a WebI prompt is created on one particular object, (which also has a Multiple Single Value type Optional Variable in SAP BI Query), its List of Values is showing up only first three values in WebI. The SAP BI Variable in BEX Analyzer shows up all the 8 values for the List of Values, for the same object.
    The Output WebI report has more values for the object than shown up in the List of Values & this is the problem.
    We tried to keep the settings in Info-object, DSO, Infoset, Multiprovider = Values in Master Data (for the List of Values).
    Similar objects and similar variables for the same query / webi show all the List of Values.
    Any guidance on aspects to be checked would be helpful.
    regards,
    Rajesh K Sarin

    Problem :
    If an SAP BI Infoset is used in data modelling, and a restricted key
    figure is created in the SAP BI Query; the resultant WebI Object Prompt
    for the Info-object, only shows up LOVs which have been used for the
    restricted Key Figure. Both the things are not related except for the
    fact that some of the values for the same object are used for the
    restricted key figure.
    Details :
    We have a Multiprovider built on an SAP BI Infoset.
    SAP BI Infoset is built using 2 DSOs.
    There is a SAP BI Query on top of this Multiprovider.
    There is a restricted key figure in the sap bi query. KeyFigure "Number
    of Records" is restricted for 3 of the relevant Info-object "Meter
    Reading Status" values.
    Universe is created on top of this SAP BI Query, using SAP Integration
    kit. WebI is created on top of this Universe.
    Prompt is created on the Universe Object for Meter Reading Status, in
    the WebI report.
    List of Values is showing up only the three values in WebI (which were
    used in the Restricted Key Figure calculation).
    SAP BI Variable in BEX Analyzer for the same Info-object Meter Reading
    Status shows up all the 8 values for the List of Values.
    The Output WebI report has more values for the object than shown up in
    the List of Values & this is the problem.
    We have kept the settings in Info-object, DSO, Infoset,
    Multiprovider, Query = Values in Master Data (for the List of Values).
    When we delete the "Restricted Key Figure" from the SAP BI Query, the
    refreshed Universe and Webi have a complete set of List of Values
    applicable.   
    Steps for Reconstruction    
    1. Create Infoset
    2. Create SAP BI Query on Infoset
    3. Create Restricted Key Figure for Number of Records and few of the
    values for a characteristic info-object "X".
    4. Create BO Universe on SAP BI Query
    5. Create Webi on BO Universe
    6. Create a Prompt on the characteristic info-object "X".
    7. Check List of Values for the characteristic info-object "X" in SAP
    BI Query and WebI.
    8. LOVs in WebI are equal to the values used for restriction in the
    restricted key figure.
    9. Delete the restricted key figure from SAP BI Query.
    10. Refresh Universe
    11. Webi prompt shows all the values for the prompt on "X".

  • Performance Issue with Webi report uses SAP BI Query as the data source

    Hello.
    I have created a Webi ad-hoc report which connects to a SAP BI query through BO OLAP universe.
    The layout of Webi is the exactly the same as the BI query.  There are filters in the Webi to restrict the number of data extraction, but even with data result of 5000 rows, it took about 30 seconds.
    If I execute the BI query with the same filter restriction, it tooks less than 10 seconds.
    It seems that large percentage of time is consumed at the MDX part.
    Is there any tuning method that could speed up the process time of MDX?
    Thank you.
    Justine
    Edited by: Justine Liu on Mar 18, 2009 6:59 AM

    Hi,
    please take a look here:
    [https://service.sap.com/sap/support/notes/1142664] (Look under related notes)
    It includes references to various performance improvements of the MDX interface. From what I saw there it is advisable to upgrade your SAP BI (7.0)  up to at least Support Package 21 (you are currently on SP 15).
    This may also be interesting for you: There is a new Fix Pack 1.4 coming out for BOBJ XI 3.1. Combined with the related SAP Enh.Pack (not sure about the version of this one) should also improve WebI performance. This fix pack is not yet officially released though but it should not take look.
    I recommend that you try the upgrade to Support Package 21 first.
    BTW it is also advisable to take a look in the results of your MDX query (e.g using the MDXTEST transaction). You should make sure that your query is indeed restricted as expected. Sometimes the results you see in SAP native reporting tools (e.g. BEx Analyzer) differ from those returned from the MDX component, depending on the way variables/restrictions where defined in the query designer. It is all about making sure that there is no apples/oranges comparison here.
    Regards,
    Stratos

  • Query related to Email adapter

    Hi,
    I have query related to receiver Email adapter. I am able to run a scenario for 2 attachments in receiver mail adapter scenario.
    My scenario is that I am picking up the multiple files using sender file adapter "additonal fiiles" fucntionality and and post the two files as attachments in receiver email adapter. I am picking up two formats: .xml file and PDF and successfully attached to the receiver email adapter.
    My query is is related to Standard module processors sequence.
    For 3 files in mail attachments(.xml , pdf & .txt)  what should be the module processors sequence in receiver email adapter?
    Currently I am using the following module processors sequence
    1     localejbs/AF_Modules/MessageTransformBean                          Local Enterprise Bean     trans2
    2     localejbs/AF_Modules/PayloadSwapBean                          Local Enterprise Bean     swap
    3     localejbs/AF_Modules/MessageTransformBean                          Local Enterprise Bean     trans1
    4     sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean     Local Enterprise Bean     mail
    swap -> swap.keyName -> payload-name
    swap> swap.keyValue> file1
    trans1> Transform.ContentDescription>file1
    trans1> Transform.ContentDisposition>attachment
    trans1> Transform.ContentType>application/pdf;name="file1.pdf"
    trans2>Transform.ContentDescription>file1
    trans2>Transform.ContentDescription>inline
    Can any body tell me what should be the sequence of module processors and the associated parameters so that all formats(.xml , pdf & .txt)  should go as an attachments in the reciever email adapter.
    Thanks & Regards
    Prabhat

    it would be something like this, Try this
    1 localejbs/AF_Modules/PayloadSwapBean Local Enterprise Bean swaptxt
    2 localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean trans3
    3 localejbs/AF_Modules/PayloadSwapBean Local Enterprise Bean swapxml
    4 localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean trans2
    5 localejbs/AF_Modules/PayloadSwapBean Local Enterprise Bean swappdf
    6 localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean trans1
    7 sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
    swapxml -> swap.keyName -> payload-name
    swapxml> swap.keyValue> file2
    swappdf -> swap.keyName -> payload-name
    swappdf> swap.keyValue> file1
    trans1> Transform.ContentDescription>file1
    trans1> Transform.ContentDisposition>attachment
    trans1> Transform.ContentType>application/pdf;name="file1.pdf"
    trans2>Transform.ContentDescription>file2
    trans2>Transform.ContentDisposition>attachment
    trans2> Transform.ContentType>application/xml;name="file2.xml"
    trans3> Transform.ContentDescription>file3
    trans3> Transform.ContentDisposition>attachment
    trans3> Transform.ContentType>application/txt;name="file3.txt"
    mail --> mime.contenttype   --> multipart/mixed
    I have not tried this myself. but it should work

  • Query related to withhold tax

    Hi  Freinds,
    This is mamatha i have a query related to withhold tax .what is diff b/w business place and section code.what is importance of section code.
    Regards
    S Mamatha
    Please, search SDN

    For India, witholding tax, you need to create the business place and section code with the same id.
    Section code is additional field provided by sap for tds related processig, reports etc.
    Regards,
    SDNer

  • Query related to User License.

    Hi all,
    I have some query related to User License.
    If we have 250 no of user license( with one developer),
    can we use them individually on DEV, QAS & PRD ?
    can we use them individually on differrent clients?
    what abt users on 000 client. Is they should different license or come under same group.
    Regards,
    shan

    Contact you SAP Account Manager.
    Regards
    Juan

Maybe you are looking for