SAP BCM the external problems.

sap bcm We live the external the search problem.
How do I solve this problem  friends.
central : avaya model

Dear Levent,
could you please elaborate a bit more? What do you mean by BCM external problems?
Best regards,
Lloyd Goveia

Similar Messages

  • Reg: IDoc is u0091pushedu0092 into SAP from the external EDI system

    Iam facing one issue in our system for message type DESADV (inbound). please read through .
    "When an IDoc is pushed in from the external EDI system & even though the inbound Partner Profile is set to immediate processing mode:
    The IDoc stays in status 64 - 'IDoc ready to be transferred to application'. This assumes that the IDoc has not been processed yet and still needs to be processed with program RBDAPP01 (or via the “process” button in BD87).
    We don't want to again run this program "RBDAPP01". What was the problem.
    I appreciate ur help.

    Hi Krishna,
    In some other scenarios if an IDocs remains in status 64, it means that the processing within the IDoc engines did not reach its end, where the new status could be set. There are two principal reasons:
    1. In the matching partner profile the processing is not set to "Trigger immediately"
    2. The application that processes the IDoc abnormally ends with a fatal error (crashes). If this happened you will see a trace in the system log (ST22). In this case have the satellite system write the file to disk but you trigger the EDI_DATA_INCOMING. Then start EDI_DATA_INCOMING from SE37 manually and debug yourself through the individual steps. A good start would be to set a break-point in the application handling function (in your case: IDOC_INPUT_DESADV ).
    If useful do reward.
    Regards,
    Adarsh Srivastava

  • Printing the data of SAP in the external system!!

    Hi Friends,
    I have one requirement.
    The user is using some external system for creating PO/SO through BAPI from SAP R/3,the actual requirement is when the user presses the print button in the external system
    then the corresponding PO/SO should get printed in the external system.How can i achieve this?
    Kindly advice...
    Regards,
    Abdul
    Message was edited by: Abdul Hakim
    Message was edited by: Abdul Hakim
    Message was edited by: Abdul Hakim
    Message was edited by: Abdul Hakim
    Message was edited by: Abdul Hakim

    Hi,
    Here some of points which i think
    1. Get PO number from external number
    2. For the some PO write RFC, which will give you
        corresponding PO details from SAP.
    3. So get data from SAP system.
    4. come back to external system extract PO data which
        you have recently got from SAP system
    5. Using print command in external system do can finish
        your work.
    This all is depend upon external system. If external
    system is SAP then things are much simpler than this.
    Regards,
    Amey

  • Oracle Backup to the external medium from DB13 via FTP

    Hi oracle experts! 
    I have difficulty by setting up the the backup to the remote directory (on Unix Server) via FTP from DB13 on Windows (Enterprise Server 64 bit).
    The parameters I have set up are in initDBSID.sap:
    backup_dev_type = stage
    stage_root_dir = folder/subfolder/DEV (important with “\” it does not work)
    archive_stage_dir = folder/subfolder/DEV (important with “\” it does not work)
    stage_copy_cmd = ftp
    remote_host = myremotehost
    remote_user = "user password"
    My problem is that all the files creating by backup or redo logs are stored under folder/subfolder and NOT as desired on folder/subfolder/DEV.
    Can some one describe how the desired path to the directory myremotehost\ \folder\subfolder\DEV can be created for backup?
    Which parameters in init<DBSID>.sap are responsible for this issue?
    Thank you very much indeed
    Regards
    Axel

    Hi!
    Of course I have set these parameters.
    My problem is that I execute backup from Windows to remote Unix-share via FTP.
    The file names are very strange e.g. S3FV1~6
    The second problem is that the files will bw written to the wrong directory
    (I have set the path to "sap/backup" and hte files wil be written to "sap").
    The third problem I have: I habe two SAP Systems installed on the same host.
    If I execute redo logs archive from DB13 I get the error "no files processing".
    How can I set up this issue?
    Thank you very much
    regards

  • I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the b.u. stops

    I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    If all you see are messages that contain the word "Starting," you didn't clear the search box.
    If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Some personal information, such as the names of your files, may be included — anonymize before posting.

  • I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files.  The external hard drive is a Western Digital "My Book Live" 2 TB.  How do I solve problem?

    I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files.  The external hard drive is a Western Digital "My Book Live" 2 TB.  How do I solve problem?

    I also had problem accessing my WD MyBookLive after upgrading to Maverick.
    To resolve the problem, I used  Connect To Server (Cmd K) to specify the IP address.
    Then I enter a user id and password I created in the MyBookLive.
    You can also verify that you have admin access to the MyBookLive using Safari or Chrome.
    Just enter the MyBookLive IP address as the URL.

  • Time Machine will not let me restore from backups after June, 2013.  I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

    Time Machine will not let me restore from backups after June, 2013.  I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

    rtilghman wrote:
    telling me to buy a new router is NOT a solution.
    And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
    Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
    What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle?

  • Had a problem copying files, now MBP won't mount the external HD`

    Hi
    I thought to put this in the MBP forum but since I thik it may be the OS I decided to post here.
    I have a newer MBP with OS 10.5, I have an external LaCie c0nnected via eSata to keep my firewire 400 port free. I mounted another external HD to the Firewire port and the computer recognized it and I started copyig some files from the LaCie to the other external. Both formatted HFS+ Files were QT files. Somewhere during the copy process things locked up. I had to force quit the copy process, then coldn't restart the computer so had to ue the boot button to turn it off. Now I can't connect anything to the FW port. The MBP won't mount the 2nd external HD so I can get those files copied. I brought up my FCE and connected the external monitor to the FW port but now that doesn't work either and it was working this morning.
    I hope I didn't blow the FW400 port! Is there any way to 'clear it' in case it's still looking for that HD? I don't kow if I'm asking theright way cause I'm really new to MAC's. I tried the Disk Utility to verify the disk and got an OK message. What else can I try?
    Thanks
    Allen

    Hi VK
    Well I didn't blow the FW port. My video editing partner came over today to discuss a project we're working on together. He has FC Pro and I have FCE4. So I mentioned the problem to him cause it was his HD that wouldn't mount.
    We had FCE open so I was showing him my external monitor fed via the FW port wasn't working either. He went to the View menu then to Video out and then to refresh video devices. BINGO! The external monitor started working. So it wasn't the FW port but apparently the FW was locked up or looking for the other HD. Now it's working. But I haven't tried connecting another external FW HD yet.
    Thanks for your help
    Allen

  • I have my iTunes music folder stored on an external hard drive.  I recently purchased a new Mac.  After attaching the external hard drive, all the songs imported without any problem except my Playlists.  Any clue about where they are or how to revive them

    I have my iTunes music folder stored on an external hard drive.  I recently purchases a new Mac.  After attaching the external hard drive, all songs imported without a problem except my playlists.  Any clue about where they are or how to revive them for use on my new Mac?
    Thanks!

    Rysz wrote:
    To retain your playlists, artwork, play counts, etc, you need to move the entire iTunes folder, not just the music files..
    Correct.
    After that just select the new folder location in iTunes> Advanced settings.
    Incorrect.
    Hold Option and launch iTunes.
    Select Choose library and select the iTunes folder.
    This will read the iTunes library.itl file in this folder and the library as it was previously will be opened.

  • I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!

    Hello al!
    I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!

    Just create a new page (or use the existing photo page) on your external site and use html to add an iframe sized to the page and link it to the mobilme gallery page. Works for me just fine when showing my gallery from a yahoo site.
    like this
    <iframe scrolling="off" allowTransparency="true" frameborder="0" scrolling="yes" style="width:100%;height:100%;border:none" src="http://gallery.me.com/your_account_name"></iframe>

  • My MBP recently started logging itself out.  I narrowed the problem to the external monitor which is connected with a Thunderbolt adapter. When I disconnected it, the problem went away.

    My early 2011 MBP laptop (OS Yosemite 10.2.2) recently started logging itself out.  I narrowed the problem to the external monitor which is connected with a Thunderbolt adapter. I installed Thunderbolt firmware update 1.2, that did not correct the problem. When I disconnect the external monitor, the problem went away. Is there something I can do to be able to use the external monitor again?

    Try Function F1

  • T400- make the external monitor primary problem.

    I use T400 and Acer p223w monitor.
    From some reason I cannot make the external monitor to be the primary monitor.
    Using the Presentation Doctor I have the option to define the external monitor as the primary but when I test it, it says that I have illegal parameters of color depth and resolution.
    The problem is that the parameters I use are the parameters currently defined on the two monitors (which mean the monitors have no problem working that way).
    Any other color depth resolution combination won’t solve the problem.
    On the other hand using the same parameters if I configure the laptop monitor to be the primary everything works just fine.
    Any idea what causing it and how to solve it will be highly appreciated.

    Since I have a German Windows client I can only guess the wording on the english client, but try the following, which worked on my T500:
    Bring up the mobility center by pressing Win+X
    Click the button to connect an external monitor
    Choose to use the external monitor as the only display
    Now that the external monitor is the only display, it is also primary of course. Now you can use the normal windows display dialog (Right-Click on desktop -> Configure -> Display) to extend the desktop to the internal display which will be secondary then
    done
    In my case windows remembers this configuration and you do not have to do these steps again after reboot or when you reconnect the external monitor.
    Hope this helps for the T400, too.
    Message Edited by pfahsel on 03-18-2009 02:18 AM

  • Please Read this ! USB Sound Blaster 24-Bit External : The Story of the endless problem

    In order to keep the good behavior here (I`m really pissed off !) I just?want to tell you something (this is ESPECIALLY for all the guys from the stuff)?Before 2 days I`ve decided to buy a new sound system for my room. I bought myself Creative Inspire t600 5. surround system. Cool. I was very happy. I?needed only to buy a sound card?working with 5. because I have a notebook DELL INSPIRON 50 who has only 2 canals. So in order to be everything beautiful I gave $70 for Usb sound blaster 24-Bit external. And from that time the problems began. In short :? I was using Vista but I found out that it wont work with this soundcard. The first problem : Didn`t identify the device. I tried with several drivers... Nope. No sound card with Vista.(This problem seems to appearance with many owners like me)?I pluged the usb soundcard in my old pc running XP and it worked . PERFECTLY. So I removed Vista from my notebook and intalled XP. This took me whole day to rebuild all my software. Finally it left to set up the sound drivers. The cherry of the icecream. Aaaaand ..... **bleep**. When I play?any track it CRACKLES. Again problem appearanced with many here. I tried to find out here what is the problem but unfortunately as u can see my english is quite bad?so I cant understand?what I need.I really like Creative but if they cant manage this problem I will?no longer buy their stuffs??JUST PLEASE SOMEBODY ANSWER ME IS THERE ANY SOLUTION FOR THIS OR NOT. I JUST WANT STRAIGHT ANSWERPS : Please do not delete my post. I know there are plenty like this. I dont want this crackles

    well ?

  • Who to reverse the OSV if it is reverse what is the future problem in SAP?

    Who to reverse the OSV (Asset) if it is reverse what is the future problem in SAP?

    CEE6 wrote:
    What video format (including embedded audio) is able to be viewed and heard by both OSX Lion users and Windows users?
    You have to make a distinction between the container format (eg, AVI, MKV) and the video/audio format (eg, DIVX). For instance, without additional software, QuickTime can play .avi files with the IndeoVideo codec, but not .avi file with the DivX codec). Further, you have to make the distinction between what can be played using an independent player, eg, QuickTime Player, and what can be played within the presentation software (Keynote or PowerPoint).
    You can refer to
    <http://mac2.microsoft.com/help/office/14/da-dk/powerpoint/item/7acce321-36fb-48d 6-8c76-12cb3a0063ee>
    for suggestions. In practice, for presentation clips, I think you're limited to MPEG-2 and MPEG-4. I don't know if an additional MPEG-2 QuickTime component is required under Lion, you'll have to check that yourself. So, in the end, it's MPEG-4. Both Keynote and PowerPoint Win/Mac should be able to handle it.
    can anyone suggest a safe application that I can purchase from the apple app store that will allow me to convert video files
    What's a 'safe application'? And why do you have to buy it from the App Store (yuck!)?
    Handbrake, as mentioned by X423424X, is free and works very well. There are probably others, too.
    this forum is the best place to learn
    Perhaps, but it may not be the place to get answers to this question. Try a PowerPoint Mac user forum, they would have more experience in these x-platform issues. This forum is oriented more towards the hardware side of the MBP platform.

  • I just got my first mac pro and I can't get the photos out of iPhotos moved on my hp external hard drive, I try export says unable, then I try to drag it from the desktop to the external hard drive but same problem. Thank you so much

    I just got my first mac pro and I can't get the photos out of iPhotos and move them on my hp external hard drive, I try export says unable, then I try to drag it from the desktop to the external hard drive but same problem. what to do? Thank you so much

    How is your external drive formatted? Use Disk Utility to check the volume format. If it is NTFS, you will need to reformat the HDD as exFAT in order to retain universal compatibility (RW to it on both Mac and Windows).

Maybe you are looking for