SAP Benefits Interface - Configuration needed?

Hi,
I need a suggestion from you., We have benefits are outsourced and they wanted to bring nightly data from third party system to SAP. For this we wanted to develop an interface for this., Now the question I have is?
1. Can we bring both master data and transaction data from third party system? or
2. Configure benefits in SAP and just bring transaction data using an interface?
Can you suggest me a way to do it and do I need configuration in SAP?
Thanks
Murthy

Remi,
I wanted to get information from Benefits provider to SAP. So do you think I can get master data at once at start and transaction data every night all by interfaces? or Should I configure Master data such as Plans, Costs, Variants etc then get the transaction data by interface? Or should we need to develop two interfaces one for master data to import plans, costs etc and another for Transaction data on regular basis?
Please suggest me.,
Thanks
Murthy

Similar Messages

Integrated Configurations com.sap.engine.interfaces.messaging.api.exception

Hi guys,
we are using PI 7.11.
With this release local processing on the advanced adapter engine is possible, when using integrated configurations.
This works fine.
Lately I faced an error situation in an RFC to JDBC scenario, when one field doesn´t meet the conditions of the database.
I tried to dig deeper to identify the incorrect value by switch on the trace in the receiver JDBC channel, as I did several times before.
Afterwards I treied to restart the message.
Following error occurs.
com.sap.engine.interfaces.messaging.api.exception.ConfigException: Unable to retrieve interface determination with object ID ab1bf720bf2711dea7d2020000000030 from CPA cache.
I made some test with integrated configurations (FTP to FTP) and come to the result that errors, which require changes on the communication channel e.g. wrong password etc. result in an new object in the CPA cache
trying restart the failed message ends up in the error specified aboce.
Anyone faced the same issue already?
Kind regards
Jochen

HI Jochen,
I feel that you should once go for a CPA Cache refresh from Adapter Engine and try executing your failed messages once again in the adapter engine.
To do a CPA Cache Refresh from the Adapter Engine:
To trigger a cache refresh from the individual Adapter Framework, open a browser window and enter the following URL:
http://<host>:<port>/CPACache/refresh?mode=delta|full
The Monitoring url is like this:
http://<host>:<port>/CPACache
Check this How-to Guide on Cache, it will be useful:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34&overridelayout=true
Thanks
Dhwani

BASIS Configuration needed to send an external mail from SAP Program

Can you please help me about the BASIS configuration needed to send an external mail from SAP Program?
Regards,
Subhasish

Hi Subhasish,
Please go thru the below link.
Re: SCOT Configuration--for external mail
Regards,
Lakshman.

Configurations needed for distributing central contract to backend system

Dear Gurus,
I have configured central contract and getting approved in the local SRM system. Now, I need to distribute the central contract to the backend system. I have already get the PI interfaces configured using the integration scenario Central contract management.
Now, I assign the backend POrg as well as the target values for the backend contract and try to release the central contract. The central contract is getting released. However, no contract is getting created in the backend system.
I donot see any XML messages generated in the SRM system (SXMB_MONI).
Do I need to maintain some settings in the SRM system to enable the distribution of contract to the backend system?
Thansk and regards,
Ranjan

Hi,
When one creates Local Contract; there is one option named 'Distribute' on contract screen.On drop down; one mention back end system. After clicking on it; contract has been created in ECC.
If contract is not getting generated in back end; refer SAP Note: 609222.
Check whether you find any error/information message in Txn BBP_CTR_MON.
SRM Settings:
1. Implement BBP_DETERMINE_LOGSYS: Determines whether contract is to be created in SRM or ECC.
2. Assign transaction type to attribute CT_PROC_TY in Org Structure.
3. Check whether have maintained message type BLAREL, COND_A, BLAORD.
4. Assign role SAP_BBP_STAL_START_PURCHASER to process contracts.
Helpful SAP Notes: 641919, 646903
Regards,
yaniVy
reward if helps

SAP CIC0 interface

Hi Gurus,
We have a requirement wherein the Dialer interface would pass the contract & a SAP interface in CRM needs to use that data it to pull the data in CIC0 (Winclient) screen.
Firstly is this requirement feasible. Is there FM / BAPI to do this?
Also, the look up options in SAP CRM does not have Contract accout. Can this be modified.
Please refer the below link for the Interaction centre screen configuration
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/0003b5b0-0b01-0010-c0b4-cb3178973441?QuickLink=index&overridelayout=true
NB:System details - SAP ISU CRM 4.0

Hello Vasu,
There are a few documentation related to this issue. Please read those notes anda verify the links, may help you!
899674    FAQ: First Export for Payroll Outsourcing Interface
561085    FAQ SAP/ADP Interface: Frequently Asked Questions
523820    SAP-ADP interface, version 2.5 (including FAQ)
135425    Step by step guide for running ADP interface servi.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/22/48dfff764c60409df148090c518518/frameset.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/6d/08c411fc519644906964be5ccc4b1f/frameset.htm
Cheers and Regards,
Jaime

Configurations needed for Proxies.

What are the all configuration steps for using a Server proxy.?

Hi Soumyasanto Sen ,
Proxy generation converts non-language-specific interface descriptions in WSDL into executable interfaces known as Proxies. Depending on the target programming language, you choose one of the following:1. Java Proxies. or 2. ABAP Proxies.
We can interface to XI through proxies. From WAS 6.20, proxy generation feature enables application systems to communicate with XI using proxies. Proxy generation enables you to create proxies in application systems. Proxies encapsulate the creation or parsing of XML messages and the communication with the relevant runtime components required to send or receive the messages.
There are two types of Proxies.
1. Java Proxies.
2. ABAP Proxies.
Java proxies are used when java applications needs to send and receive data and ABAP proxies are used when ABAP applications needs to send and receive data.
The following websites contained detailed explanation (PDF & PPT docs) on Configurations needed for Proxies:
Proxy Generation
http://help.sap.com/saphelp_nw04/helpdata/en/86/58cd3b11571962e10000000a11402f/content.htm
ABAP Proxy Runtime
http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm
To activate ABAP proxies
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Detailed step-by-step solution for ABAP proxies in XI
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
ABAP Server proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Debugging of Inbound ABAP proxies
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
File to R/3 via ABAP Proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
How to push data from BI to XI using proxy
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e698aa90-0201-0010-7982-b498e02af76b
How to push data into BW from XI using proxy
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/18dfe590-0201-0010-6b8b-d21dfa9929c9
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
cheers!
gyanaraj
****Pls reward points if u find this helpful

File to RFC Error com.sap.engine.interfaces.messaging.api.exception.Messagi

Hi ,
I am doing File to RFC Scenario.
My file get picked and I able to view the audit log under RWB message monitoring.
Here I am getting the error
u201CTransmitting the message to endpoint dest://XI_INTEGRATION_SERVER using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message using HTTPTransmitter. Reason: java.net.MalformedURLException: unknown protocol: dest.
Can any one tell me what is the reason.
Regards, Navneet

Hi Prakasu,
I am using PI 7.1 version .
When I opened SMICM there I am finding the HTTP Port as 52000.and the BS at SLD are also using the same Port in URL..
And when i verified with the Basis they confirmed that Exchange profile is set correctly.
But My file adapter is still not able to send the data to IS.
Than I configured a scenario file to file without IR object and in this case data is coming to IS and it is succesfull also.
what is the reason that in this case file adapter not able to push the data to IS.
I used File adapter with NFS protocol.
regards,
navneet

Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all

Hello,
I have an issue configuring a simple File Adapter Content Conversion, it will be great to give me some support as I'am new in the PO Environment.
Iam reading a flat file and trying to write into an XML in the same FTP server
I have a 1 to 1 Mapping as follows
And my Content Conversion at Sender side Looks like this
After running the configuration Iam getting following error message
Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all
My System is the SAP Netweaver Process Intgration 7.4 single Java stack
Do you have any idea how to fix this issue?
Many thanks in advance
Khadim

Hi evrybody
I have enabled the tracing of ICO and have seen that my payload for the message mapping is ok,.
<ns:hartgeldbest_ERP_KT xmlns:ns="http://xxxxxx.de">
<Recordset>
<header>
     <gesellschaft>03</gesellschaft>
     <filiale>000</filiale>
     <satzart>11</satzart>
     <datum>00000000</datum>
     <kennzeichen>1</kennzeichen>
</header>
</Recordset>
</ns:hartgeldbest_ERP_KT>
The issue is on detrmining the RECEIVER in the Main-XML
<sap:Main xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3"versionMinor="1" SOAP:mustUnderstand="1">
<sap:MessageClass>ApplicationMessage</sap:MessageClass>
<sap:ProcessingMode>asynchronous</sap:ProcessingMode>
<sap:MessageId>ae41678e-da87-11e3-cd0f-0000006831a2</sap:MessageId>
<sap:TimeSent>2014-05-13T10:16:43Z</sap:TimeSent>
<sap:Sender>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty"/>
<sap:Service>CC_Hartgeldbest_File2Idoc</sap:Service>
</sap:Sender>
<sap:Receiver>
<sap:Party agency="" scheme=""/>
<sap:Service/>
</sap:Receiver>
<sap:Interface namespace="http://xxxxx.de">hartgeldbest_KT_async_out</sap:Interface>
</sap:Main>
Is it possible that the receiver is overwritten due to the Content Conversion? Because if I set my Message Protocol to "File" the receiver determination will work.
Any idea?
Thx
Khadim

Configuration needed for SOA call to create PO in classic scenario

Dear Experts,
We are working in the SAP SRM 7.01 with backend system on ecc 6.0 Enhancement pack 5. The scenario configured is classic scenario.
I want to know what are the configurations needed to use SOA calls to create a purchase order in the backend system.
In the system landscape directory, when I use the system type "ERP_3.0" for backend system, the system uses the BAPI 'BAPI_PO_CREATE1' to create a purchase order in the backend system.
When we use the system type "ERP_4.0", it does not use the BAPI 'BAPI_PO_CREATE1' to create purchase order. It tries to use SOA calls to create PO in the backend system. However, it fails to create one.
Could you please let me know what are the settings we need to do to create a purchase order in the backend system?
Thanks and regards,
Ranjan
Ranjan Sutradhar

Hi Vardhan,
Can you be a little clear? are you using PDP scenario as in your requirements are coming as PR from ECC into SRM as SC? Is this the scenario?
Regards,
Nikhil

What are the configuration need between R3 and XI when we use RFC sync adap

hi,
What are the configuration need between R3 and XI when we use RFC sync adapter.
Regards
siva.

if its the sender adapter ref:
RFC adapter
Sender- /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
Receiver;
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
Also;
trouble shooting rfc/soap -
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009

WLC DHCP Settings - Under Dynamic Interface configuration

Hi Guys,
If I have a dynamic interface that is connected to a subnet where the router interfaces have DHCP servers configured under the helper address commands, do I need to configure the DHCP fields under the dynamic interface configuration?
I have helper address configured on the connected routers AND these fields configured with the same DHCP servers.
Just wondering if I can take the IPs out of the WLC configuration?
Many thx indeed,
Ken

Ken, the DHCP address under the dynamic interface, is the address the WLC will unicast the DHCP request to when a client tries to use that interface. Under normal operation this address is needed. There is a way to get the WLC to bridge the packet to the wire so that it is a broadcast instead of a unicast packet. CLI command is config dhcp proxy disable.
But I do believe that even if you issue the CLI command, the software wants the DHCP address listed under the dynamic interface.
HTH,
Steve

Network Interface Configuration

For Solaris 9,
<<Q1>> What is the following interfaces name means? le, hme? Which is the Ethernet port?
<<Q2>> Where is the networking configuration file stored in the Solaris 9?
<<Q3>>How to configure the network interfaces in Solaris 9?
<<Q4>> Did we need to restart the network after we have edit the network configuration? If, how to restart the network? (e.g. in Debian /etc/init.d/networking restart).
Please assist.

You also posted this same question at another forum web site.
It appears your answer is going to be over there.
There's now no sense in duplicating it here.
['Network Interface Configuration' at www.LinuxQuestions.Org|http://www.linuxquestions.org/questions/solaris-opensolaris-20/network-interface-configuration-652192/]

How to enter into interface configuration mode on aironet 1130AG

How can I enter into "interface configuration" on Aironet 1130AG, AIR-LAP1042N?
When I put following commands in enable
conf t
interface Dot11Radio1
but, it fails and I cannot enter into "interface configuration".
How can I do this ?
The reason why I enter into
conf t
interface Dot11Radio1
because I want to disable cdp via CLI ( serial console).
best regards

George,
I ran into an exception the other day – lightweight 3500s (and presumably 3600s) are allowing config t without the debug precursor. The lab version I’m doing this on is 7.0.220.0. Do you have same/different results? I’m not sure if this is tied to the AP model or the lw code they’re running. I’ll need to do some more testing.
Justin

SAP BSI Interface - Group Code

Hi Experts,
In the SAP BSI Interface, where is the Group Code (GC) coming from? I tried overriding this value from IT0234 but it doesn't seem to be accepting it. Its there in the Input table P0234, however, when I look at the Employee Data it is still taking the old Group Code into consideration and passing this on to the BSI Interface.
I need to change the Group Code so that the correct GC is passed in the BSI Interface from SAP.
Your help is greatly appreciated.

Thanks for your inputs!
So this is what I have so far --
I've maintained the Employee Groups in TaxFactory (correct Data Source and Data Set).
I see that in UMOT the Group Code is defaulted to "EG99".
I've maintained IT0234 for this employee with Empl.override group defined and Override percentage as 100%.
In the payroll log, under USTAX I see IT0234 (P0234) under Input, however, under Processing when I select "Employee Data" I still see the Group Code defined as EG99. This is then passed in the BSI interface as well.
For some reason its not taking the override defined in IT0234.
Am I missing something?
Thanks again for your help!

Export SAP Netweaver Portal configuration and setting

Currenlly, I am developing a web dynpro application which will be deploy into sap netweaver portal using Iview.
Anyone has an idea of how to export all NEWLY ADDED sap netweaver portal configurations and settings such as portal content information (Iview), ume info such as role, groups and users, portal theme, modified login page and masthead, knwoledge management, collaboration .... from the sap netweaver portal in my development environment into my client's UAT and Production SAP Netweaver Portal server.

Hi
For transporting iVIEWs
goto system admin -- transports -- transport package - export --
now create a folder under portal content and right click ur folder - new -- transport package -- give name and id and open object and add ur iviews to that package and click on export- and click on start export
now download the file and save to ur desktop
and login to ur QA system and goto system admin -- tranport -- transport package -- import -Source for Package Files - select client -- browse ur file and click import
for theme transport goto system admin -- portal display -- theme transport -- under export theme click on ur theme and and save that file to ur desktop
now login to QA and goto system admin - portal display -- theme transport -- import -- brose ur theme and upload
for modified logon page u need to deploy ur par file into ur QA system
For KM transport check this bogs
KM transports: Part I
KM transports: Part II
KM transports: Part III
KM Transports: part VI
KM Transports: Part V
Regards
Krishna.

SAP Benefits Interface - Configuration needed?

Similar Messages

Maybe you are looking for