SAP Best Practices - Error during the activation of Baseline Package

Hello,
I don´t know if this is the right forum to post this message, but I posting here as i didn´t get the info from the related forum, apologies for that.
During the process of activation the Baseline Package 603V8 on ECC6.0 EHP3 (I´m importing all scenarios) from solution builder (txcode /n/smb/bbi)... it stopped and it shows me the following error:
Start activation BC Set: /SMBA0/V_T001P_B0BN_J01
Not activated - error
End of activation BC Set: /SMBA0/V_T001P_B0BN_J01
Can someone help me solve this problem?
Thank you
João Dimas - Portugal

Hello again,
I already solved this specific issue that I reported in my previous message, I did the manual activation (txcode SCPR20) of that BC Set: /SMBA0/V_T001P_B0BN_J01 guided by the document "SAP Best Practices Tools". After this activation I pressed the Change button that is displayed in the Old Status column and I changed the status to successful, after I chose the Activate to continue with the installation. But, once again, other error stopped the installation, now with other BC Set:
/SMBA0/V_T001L_B175_J0A
I tried to solve with the same method through the manual activation, but now it was not possible, when I do that in SCPR20 the activation logs show me four warnings (see the image "BC Sets: Activation logs")... and I don´t want to continue with activation/installation of the full scope without solve this issue or can I continue?!
Can you help me please?
Thank you,
João Dimas - Portugal

Similar Messages

  • SAP Best Practices for Fiscal Representative Scenraio

    Hello Friends,
    Need your inputs to understand the SAP best practices to implement the solution . Currently we are doing the implentation for one of european client. During the requirement, we identified the unique requirement which is common in european business, and the requirement is billing to fiscal representative and also from fiscal representative. The representation of the process is -
    A Company not established in a countries where company needs to engage a transactions subject to the local VAT such as: building services, storage, events, imports carried out in this state in the name of main company and any operation of "purchase/resale" carried out in this state. To do such transactions, company obligation to register for VAT in the concerned state or country with a local VAT number.
    To obtain this, Company order appoints a Fiscal Representative who:
    a. Ensures Company for tax legislation and allows to answer the obligations as regards to local VAT .
    b. Deals with the VAT declarations including the requests for refunding and Intrastate.
    c. Manages the registration near the tax authorities, Company VAT Balance, the follow-up of the payments of VAT .
    d. Takes care for any correspondence with the local tax authorities, including in the event of tax control.
    These representatives are also responsible for billing intercompany customers and also final customers for the local tax obligations.
    Business Requirement -
    Client need to setup a fiscal representatives in ECC wherever applicable other than company code country
    These representatives having a separate VAT number per country
    These representatives do operations on behalf of main company code in the countries
    Example scenario -
    Business Case 1
    There are two company codes, A100 in ITALY and A200 in Switzerland
    A200 appoints a fiscal representative in Italy for Italian operations
    A100 supply the goods to A200 but the intercompany bill is raised between A100 to A200's fiscal representative in Italy.
    By our internal observation and the ground work, we confirm that the SAP Plant abroad functionality can be fulfilled for this requirement. However, our customer wants to understand how the other clients are doing and the best practices.
    Thanks in advance to share your inputs
    Best Regards,
    Goutham

    Goutham,
    VAT reporting requirements and VAT solutions found in SAP are country dependent.  Although it is not my area of expertise, I believe the use of Fiscal Representatives is also driven by country restrictions.
    To find any of SAP's Best Practices solutions that are localized for countries, refer to their Best practices sites.  For instance, Italy and Switzerland baseline localized BPs are found
    here
    http://help.sap.com/bp_bl603/BL_IT/HTML/index.htm
    and here
    http://help.sap.com/bp_bl603/BL_CH/HTML/index.htm
    There can be additional info to be found in the industry specific sites
    http://help.sap.com/content/bestpractices/industry/index.htm
    The only place I found fiscal representative explicitly mentioned within SAP was in a doc describing a localized Romanian tax report.
    As suggested by an answer to your previous post, there might be some experts on one of the FI forums that could offer you advice.  Try for a start
    SAP ERP Financials
    Good Luck,
    DB49

  • HR Master Data conversion-SAP Best Practices

    Hello there,
    We would like to use the SAP Best Practices for HR Master Data conversion. 
    Now we want leverage the SAP Best practices to convert the Master data.  Could any one explain in detail how to do the same.
    How to install the Best Practices only to the extent of the Data conversion.  We don't want to use the rest of the Best Practicies.
    I know there are some notes out there. 
    Any help on the above highly appriciated.

    HI,
    I am not v sure if u can install only the required component. But there would be some pre requisites for every installation.
    It will be clearly mentioned in the base line
    Also Check if its available for the country which ur currently working...
    Use the ECATT: Test Configuratio & Test Scripts
    Pls revert in case u need further more details..

  • BPC7.5NW - Work Status SAP Best Practices

    Hello Experts,
    I would like to get your expert opinion on the Work Status settings.
    Usually, we configure work status settings at the Application Set and Application levels.  At the application level, we do the configuration to lock down the data region based on the dimensions present in the Application Set.  SAP help website says that between 3 and 5 dimensions are enough to define a data region and lock it.
    I would like to know if there is an SAP best practice, that guides the user about what dimension types to use?  For example, 'C' type, 'E' type and 'T' type, etc.
    Your help is greatly appreciated.
    Thanks!

    Hi,
    It would mainly driven by your user requirements. Generally you would have entity, time and category in the work status. Entity is used if you want users to set the status to 'submitted' for example, for their entities. Apart from these three if you beleive there is a reason for you to include your datasource for example, you can specify. You cannot use the account dimension though.
    Generally Entity,Cat & time are the common ones. Please let me know if you need any further details.
    Thanks,
    Sreeni

  • SAP Best Practices Business Package Transport Error

    Hi all,
           We tried to import the SAP Best Practices Business package but we are unable to import the file.  We have checked the log file ...Below is the log file...
    [code]
    #1.5#001321CB9A4500510000022100001F7800040025EB1E5E74#1126062765280#com.sap.portal.transport#sap.com/irj#com.sap.portal.transport#Administrator#1033##DEV1_EPD_9515850#Administrator#7b5495401f4b11da9472001321cb9a45#SAPEngine_Application_Thread[impl:3]_9##0#0#Error#1#/System/Server#Java### [com.sapportals.portal.transport.ui.ImportComponent] File upload failed.
    [EXCEPTION]
    #1#java.io.IOException: Bad ZIP file format: C:
    WINDOWS
    TEMP
    _htmlb11260627630311218.tmp; does not contain a package file.
         at com.sapportals.portal.transport.ui.ImportComponent.extractPackageZip(ImportComponent.java:1959)
         at com.sapportals.portal.transport.ui.ImportComponent.doFileUpload(ImportComponent.java:822)
         at com.sapportals.portal.transport.ui.ImportComponent.doOnUpdatePreviewPage(ImportComponent.java:536)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.handleRequestEvent(AbstractPortalComponent.java:700)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:412)
         at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
         at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:369)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:707)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:232)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:153)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
         at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
    [/code]
    Does anyone faced the similar issue as above???
    Regards
    Vasu

    Hello Vasudevan,
      Unzip the content of the Business Package zip file into some folder. While importing the business package, select the .pkg file in the unzipped folder. This solves your problem.
    Best Regards,
    Srinivas.

  • Best Practice for enhancing the SAP delivered standard WD ABAP application

    Hi,
    I am new to WebDypro ABAP.
    To enhance the SAP delivered Standard WebDynpro Component (complex component with Business objects & powl).
    Kindly let me know the best practice for enhancing the Standard WD ABAP from the below 1 or 2.
    1) To copy & create a "Z" of the component & make changes in that (or)
    2) to enhance directly on the same standard component without making "Z".
    Regards,
    NS

    Hi NS,
    If it is a standard component its better we go for enhancing the component rather than copying it into Z component.
    If there is any issue with in the standard component , SAP supports it through notes and OSS messages. If it is a Z component, SAP doesn't support it.
    If there is any up gradation of business packages, changes will be done to standard , but not the Z components, wherein we could miss it.
    Further, since it is a standard component it might have been used at many places, changes that has to done to reflect all changes might be difficult in this case if it is a z component.
    Regards,
    Harsha

  • The facetime app won't let me sign in anymore any ideas? It keeps saying 'an error occurred during the activation, try again' what shuld I do?

    The facetime app won't let me sign in anymore. I've been using it fine since Christmas, I haven't used my iPod Touch for about 2 weeks and now when I try to sgn in I get the message 'an error occurred during the activation, try again' what should I do?

    After reading some posts, I see that it is cause by the date and time changing. I reset these ad now Facetime works OK

  • The SAP Best Practices for Discrete Manufacturing V1.603

    Hai All,
    We are implementing SAP A1 for manufacturing company, so We selected SAP Best Practices for Discrete Manufacturing V1.603. Hear my question is after ecc 6.0 installation what level i need to update  the patches, because if i update all patches(up to date) it will give problem while building block updating.
    Thanks in Advance...
    Sushma Tatineni

    Dear,
    For detail information please refer the OSS notes,
    1040010 and 1223033 - SAP Best Practices for Discrete Manufacturing V1.603 CN
    Ensure that exactly the support package levels mentioned in the Quick Guide are implemented (not below and NOT HIGHER).
    Regards,
    R.rahmankar

  • Anybody has documentation on the SAP Best Practices for BI 7.0

    I am currently looking for SAP Best Practices for BI 7.0 and speccifically needed documentation on installation of Business Content. Please email me at bala215 "at" yahoo.com

    Hi,
    There's some more links in the threads below :
    SAP BI Best Practices - Info
    Best Practices for Implementing BI7.0
    Cheers,
    Kedar

  • Req:SAP Best practice for the Funds Management

    Dear all,
    Let me know where I can get the SAP Best practice for the Funds Management . Waiting for your valuable reply.
    Regards
    Manohar

    Hello Manohar,
    You can find documentation in links below:
    Industry Solution Master Guide - SAP for Public Sector:
    https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000065911
    SAP Best Practices for Public Sector:
    http://help.sap.com/  SAP Best Practices -> Industry Packages -> Public
    Sector
    Online Library for Funds Management:
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/41/c62c6d6d84104ab938a
    a7eae51db06/frameset.htm
    I hope it helps
    Best Regards,
    Vanessa Barth.

  • Install The ERP SAP Best Practices Baseline Package (VE)

    Hello
    We would like to install The ERP SAP Best Practices Baseline Package (VE)
    And reviewing the  Quick Guide to Installing the SAP Best Practices Baseline Package (VE), included in the SAP NOTE 1171816, in the list of components installed we need SAP ERP 6.0 with EhP3 with support package stack 1, but we received the installation disc of the Ehp4, and this version is not supported for the Baseline Package (VE).
    We are unable to find the installation the disc, or the media list for this solution (SAP ECC 6.0 EhP3).
    Can somebody tell me where can i find this?
    The information in the service.sap.com/instguides is about installing EhP4.
    We are using Windows 2008 EE with MS-SQL 2005.
    Thanks for your Help

    Hello Sunny,
    I hava setup MOPZ, and uploaded the correct packages to the SAINT transaction, but it gives me a warning, i need to include the following files to my upgrade queue:
    EA-APPL, 603       SAPK-603DHINEAAPPL   (SP Level: 0001)
    FINBASIS, 603      SAPK-60301INFINBASIS (SP Level: 0001)
    EA-PS, 603           SAPK-603DHINEAPS     (SP Level: 0001)
    SEM-BW, 603        SAPK-60301INSEMBW    (SP Level: 0001)
    I downloaded the packagesfrom SWDC but still is missing EA-PS, 603 SAPK-603DHINEAPS the file i downloaded was CSN0120061532_0028760.PAT
    In the SAP Note 1083533
    "If you receive the warning stating that additional Support
    Packages (level 0001) must be included in the installation of
    Enhancement Package 3, check the Support Package level of the
    relevant component. You can ignore the warning in the following
    cases:
    All components (Release 600) except EA-HR 600: Support Package
    level 0011
    EA-HR 600: Support Package level 0026
    - Note the following: In the case of a higher Support Package
    level (at least Support Package level 0012 or Support Package
    level 0026 for EA-HR), you must NOT ignore this warning."
    My SP level is 11 for all components and EA-HR is lvl 22, should i ignore this?
    Kind Regards

  • Help on Installing the SAP Best Practices Baseline Package

    We are in the process of installing the SAP Best Practices Baseline Package. We are on ECC5.0. Any tips/ tricks/ gotchas will be greatly appreciated.

    hi Mani,
    check this out:
    http://help.sap.com/bp_bblibrary/500/documentation/BL_Quick_Guide_EN_DE.doc
    regards
    sham'm

  • Error During the smartform Activation

    Dear Gurus,
    During the activation of the Smartform I got the following error in Global Definition Node:
    Statement Concluding with "..TYPE" ended unexpectdly.
    Kindly let me know how to resolve this.
    Wishes,
    Abhishek

    Hi Abhishek,
    I think in the smart form in form interface in the import/export/tables associated type is missing.
    Thanks,
    Leela Krishna

  • Error in report during the activation

    HI gurus,
         can any body help me solving this problem.during the activating  the program i am getting problem.
    REPORT  ZSD_RDD0028_DELIVERY_OOP                .
    *& STRUCTURE DECLARATION OF LIKP                            *
    TYPES : BEGIN OF TY_LIKP,
            VBELN TYPE VBELN_VL, "Delivery NO"
            VKORG TYPE VKORG, "Sales Organization"
            LFART TYPE LFART, "Delivery Type"
            KUNNR TYPE KUNNR,  "Ship-To Party"
            END OF TY_LIKP,
    *STRUCTURE DECLARATION OF LIPS TABLE
            BEGIN OF TY_LIPS,
            VBELN TYPE VBELN_VL, "Delivery"
            POSNR TYPE POSNR_VL, "Delivery item"
            MATNR TYPE MATNR, "Material Number"
            END OF TY_LIPS,
    *STRUCTURE DECLARATION OF KNA1 TABLE
            BEGIN OF TY_KNA1,
            KUNNR TYPE KUNNR, "Ship-To Party"
            NAME1 TYPE NAME1, "NAME"
            ORT01 TYPE ORT01, "CITY"
            PSTLZ TYPE PSTLZ,  "POSTAL CODE"
            END OF TY_KNA1,
    STRUCTURE DECLARATION OF FINAL OUTPUT
            BEGIN OF TY_OUTPUT,
            VBELN TYPE VBELN_VL,
            VKORG TYPE VKORG,
            LFART TYPE LFART,
            KUNNR TYPE KUNNR,
            POSNR TYPE POSNR_VL,
            MATNR TYPE MATNR,
            NAME1 TYPE NAME1,
            ORT01 TYPE ORT01,
            PSTLZ TYPE PSTLZ,
            END OF TY_OUTPUT.
    INTERNAL TABLE DECLARATION FOR LIKP
    DATA : T_LIKP TYPE STANDARD TABLE OF TY_LIKP INITIAL SIZE 0,
    INTERNAL TABLE DECLARATION FOR LIPS
           T_LIPS TYPE STANDARD TABLE OF TY_LIPS INITIAL SIZE 0,
    INTERNAL TABLE DECLARATION FOR KNA1
           T_KNA1 TYPE STANDARD TABLE OF TY_KNA1 INITIAL SIZE 0,
    INTERNAL TABLE DECLARATION FOR OUTPUT.
           T_OUTPUT TYPE STANDARD TABLE OF TY_OUTPUT INITIAL SIZE 0,
    WORK-AREA DECLARATION FOR LIKP.
           W_LIKP TYPE TY_LIKP,
    WORK-AREA DECLARATION FOR LIPS.
           W_LIPS TYPE TY_LIPS,
    WORK-AREA DECLARATION FOR KNA1.
           W_KNA1 TYPE TY_KNA1,
    WORK-AREA DECLARATION FOR OUTPUT.
           W_OUTPUT TYPE TY_OUTPUT,
    DECLARATION OF CLASS.
           G_MAIN TYPE REF TO ZCL_GET_SALES_DATA,
           G_VBELN TYPE LIKP-VBELN.
    SELECTION-SCREEN DECLARATION.
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME .
    SELECT-OPTIONS : S_VBELN FOR G_VBELN .
    SELECTION-SCREEN END OF BLOCK B1.
    PARAMETERS : P_R1 as CHECKBOX .
    INITIALIZATION.
    INITIALIZATION.
    CLEAR WORKAREA AND INTERNAL TABLE
          CLEAR :  W_LIKP ,
                   W_LIPS ,
                   W_OUTPUT,
                   W_KNA1 .
    REFRESH WORK AREA AND INTERNAL TABLE
        REFRESH : T_LIKP,
                  T_LIPS ,
                  T_OUTPUT,
                  T_KNA1 .
    *==================
    AT SELECTION-SCREEN
    AT SELECTION-SCREEN.
    START-OF-SELECTION.
    START-OF-SELECTION.
    CREATING THE OBJECT FOR THE CLASS.
      CREATE OBJECT G_MAIN.
    GET THE LIKP DATA.
    CALL METHOD G_MAIN->GET_LIKP
      EXPORTING
        VBELN_LOW  = 'S_VBELN-LOW'
        VBELN_HIGH = 'S_VBELN-HIGH'
      CHANGING
        T_LIKP     = 'T_LIKP'.
    GET THE LIPS DATA.
    CALL METHOD G_MAIN->GET_LIPS
      EXPORTING
        T_LIKP = 'T_LIKP'
      CHANGING
        T_LIPS = 'T_LIPS'.
    GET THE KNA1 DATA.
    CALL METHOD G_MAIN->GET_KNA1
      EXPORTING
        T_LIKP = 'T_LIKP'
      CHANGING
        T_KNA1 = 'T_KNA1'.
    *DISPLAY THE DATA .
    PERFORM SUB_DISP_DATA.
    *&      Form  SUB_DISP_DATA
          text
    -->  p1        text
    <--  p2        text
    FORM SUB_DISP_DATA .
    LOOP AT T_LIPS INTO W_LIPS.
    CLEAR W_LIKP.
    READ TABLE T_LIKP INTO W_LIKP WITH KEY VBELN = W_LIKP-VBELN.
    CLEAR W_KNA1.
    READ TABLE T_KNA1 INTO W_KNA1 WITH KEY KUNNR = W_LIKP-KUNNR.
    WRITE :/ W_LIPS-VBELN,
             W_LIPS-POSNR,
             W_LIKP-VKORG,
             W_LIKP-KUNNR,
             W_KNA1-NAME1,
             W_KNA1-ORT01,
             W_LIPS-NTGEW.
    ENDLOOP.
    ENDFORM.                    " SUB_DISP_DATA

    Hi Rohit,
    I copied ur prog n tried to execute but as u have used the Z classes I commented tht part n activated I dint get any error so if u can be a little more specific abt the error I think we can relate it.
    Also I think the error could be with the way u have used the classes so just check that once.
    Regds
    Seema

  • Installing the SAP Best Practices for Pharmaceuticals

    Hi!!
    Is it necessary to install SAP Best Practices for Pharmaceuticals on different clint os same SAP SERVER?
    Best Regards,
    Ajit Dubal.

    Hi Ajit,
                     You can do either way so check with functional people how they want?
    Regards,
    Hari.

Maybe you are looking for

  • Po Qty

    Hi,      is there any provision in po where i can see the total of all the quantities and values that i have entered. example: material          QTY              Price ABC                20                 10 xyz                 13                  2

  • Premiere and Photoshop Elements 10 Sign-in issue.

    Hi. Can anyone tell me why when i am running Elements 10 or Premiere 10 i am not able too sign in to my Adobe ID account?.No information comes up in the organiser or editer screens as i believe it should give my name at top of page aswell as log-on d

  • How to restrict a VPN user with a specific anyconnect profile?

    I need to assign to anyconnect users different profiles. This is done easily with IPSec, with the group policy configured in the client. With anyconnect I have two options: - Allow the user to select the connect profile: The problem here is the user

  • Making a button in a scrollbar

    Hello, First things first. I know my english is not the best but I will try to explain my problem as clearly as I can. I have a problem with my Indesign document I am using indesign5.5. I am making an ipad version of a newspaper. And I made a scroll

  • QT Pro key is invalid after reinstall

    I had to reinstall my OS and all of my software and now my QT Pro Key that I purchased earlier this year is not valid after the reinstall of QT 7.  Any ideas why?  Apple won't help at all.  I would have to pay $50 for technical support, which is dumb