SAP Best Practises for Logistic Modules

Dear Reader,
Does anyone know how to find SAP Best Practises for Netweaver 2004s Logistic scenarios (SD, MM,)
The old Netwvr 2004 scenarioas are less helpful, especially in Inventory mgmt.
Thanks

Check this link, this is the latest I guess.
[SAP Best Practices|http://help.sap.com/bp_bw370/html/index.htm]
Cheers,
Neel.

Similar Messages

SAP Best Practise. Requirement for CERTIFICATES for products being sold

Hi All
Please share is there a SAP Best Practice for using CERTIFICATES in SAP?
There is a legal requirement in Russia for products being SOLD: if product is subject to cerification, then company is now allowed to sell such product if certicate is missing or expired.
- product should be blocked for sales order/ quoatation if mandatory ceriticate is missing or expired.
Is there a SAP Best Practice for this kind of process?
Thanks in advance
Regards
Andrey

Hi
I suppose this can be achieved through DMS (Document Mangament System).
You can customize the cross plant material master settings and link it to the DMS module.
The suggesstion I am givng is very high level, but it might help you to put your thoughts in that direction.

Experiences on SAP Best Practise packages?

We are considering applying a specific SAP Best Practise package on top of ECC6. It will be a new ECC6 installation.
I have read the BP faq pages http://help.sap.com/bp_bw370/html/faq.htm and read note 1225909 - How to apply SAP Best Practices - and the specific note and the specific installation guide for required Best Practise package.
I understand that applying a BP package is something not that easy but should speed up the implementation process.
If you have been participating in a project that implemented SAP Best Practises on ERP, would you please share your experiences with me.
Here are some topics for discussion:
(BP=SAP Best Practise package)
BP implementation could make constraints to your future EHP or SP upgrades, while BP is tightly linked to certain EHP and SP-level?
SAP support?
Installation process including config steps according BP installation guide is longer than usual, while there can be multiple activation and configuration steps done by others than basis consultants?
BPs are country dependent. What if your application is used multinationally?
What if you later find BP unneccessary?
generate difficulties in the beginning but did considerably speed up reaching the final goal compared to ECC6 without BP.
traps to fall in?
typical issues that basis staff has to notify when preparing/installing a ERP system to be with BP?
positive/negative things
I am not saying above statements are true or false. Just wanted to charge you giving comments.
Br: KimZi
Edited by: Kimmzini Siewoinenski on Aug 11, 2009 8:35 PM

Hi,
Make sure your web service URL correct in Live Office connection and also in Xcelsius data manager.
Did you check all connection in refresh button proprties? you may try selecting "Refresh after component are Loaded" in Refresh button properties Behavior tab.
I think Xcelsius refresh are serial refresh so it may be possible that first component refresh is still in progress but you are expecting other component to refresh.
Click on "Enable Load Cursor" in data manager's Usage tab, it will give you visibility of refresh. If anything refreshing you will see hour glass.
Cheers

SAP Best Practises - Installation

Hello All,
I had installed SAP best Practises base line package SAP BP-ERP 617V6 in my system a couple of weeks back. But now when I am trying to activate the Best practises it is asking for the solution scope files and the installation text files. But when I am checking on Service market place , it seems SAP has with drawn the files for 617-V6 and has updated them with the latest files of 617-V7.
Now without these files I cannot proceed any further. And I have already activated the Business sets and Business Enterprise Functions in Client 000 and created a new client from 000.
In this regards can anyone advise what will be the best way forward. Can I upgrade my BP version BP-ERP 617-V7 now and proceed. Are there any special steps that I need to do for the BC sets which are already activated. I am guessing I will need to a client copy once again.
I also went through SAP Note 1301301 , Point IV , which talks about the upgrade of SAP BP package but it lacks clarity on the above points.
I have also raised a Customer message on this but will really appreciate your views in this regards.
Thanks
S

Hello Surajit Das,
In http://service.sap.com/swdc have you tried looking in Archive Area ?
SAP will generally hold the previous versions of software and components in the archive area for some time.
Regards,
Siddhesh

SAP BEST PRACTISE BI-Purchasing Volume Dashboard issue

Hello,
I am working on Purchasing Volume Dashboard (from SAP BEST PRACTISE BI package), I adapted Crystal Reports sources of this dashboard so that they connect to our local database and successfully generated the Export.xls, I Imported this Export.xls file into Purchasing Volume Dashboard.xls, added and configured Live Office Connections (ticking"Refresh before components are loaded" for each Live Connections.
The issue is that when I click on PREVIEW the four components (Charts and Scorecard) don't refresh simultaneously.
I have to click once on REFRESH button to have the first component refreshed with data then to click again to have the second component refreshed then click again and again !
I don't understand why those components don't refresh in the same time !!
Did one of you ever encountered this issue ?
many thanks for your help,
Regards
Christiane

Hi,
Make sure your web service URL correct in Live Office connection and also in Xcelsius data manager.
Did you check all connection in refresh button proprties? you may try selecting "Refresh after component are Loaded" in Refresh button properties Behavior tab.
I think Xcelsius refresh are serial refresh so it may be possible that first component refresh is still in progress but you are expecting other component to refresh.
Click on "Enable Load Cursor" in data manager's Usage tab, it will give you visibility of refresh. If anything refreshing you will see hour glass.
Cheers

ECC 6.0 upgrade to Best practise for chemical industry implementation

Dear All.,
Please tell me what all the EHP3 must be updated in the SAP erp ecc 6.0. I have already updated
SAP_APPL 60304.
Tell me what is the next Ehp3 required before i start best practise in saint.
Thanks & Regards,
Manju

Dear sir.,
I have installed SAP ECC 6.0 for a chemical industry, now am planning to implement Best practise to reduce implementation time.
1) As per the SAP Quick quide i have downloaded best practise for chemical industry(IS) and implemented through SAINT, and the prerequisites were maintained as per the SAP notes 774615,1301301,1064635,
2)The above mentioned notes explains minimum stack11 and sapka=18,sapkb=18,sapbw=20,PI_Basis-2005_1_700=20 and sap_ap=15 to update Ehp3 for SAP_APPL603.
3) After updating all the above mentioned patch level i implemented the Best practise in saint and that was successful.
But still the problem persist in activation of BP by tcode /n/smb/bbi only 70% has been completed and activation stoped with *ABAP program error ASSIGNSUBSTRING_NOT_ALLOWED and relevent note is 1295083*_
Please any one tell me, is that required to update all the EHP3 components since i have maintained only SAP_APPL60304.
What all Ehp3 components should be updated to get a smooth activation og BP for chemical industry.

How to install Best Practise for HCM

Hi all:
Could you please tell me how to install best practise for HCM , as there is no autoran file.
Thank you very much!!!
Best regards
Frank

Hi,
Did you chk this link;
http://help.sap.com/content/bestpractices/overview/index.htm
http://help.sap.com/bp_hcmv1600/HCM_US/HTML/index.htm
Regards
CSM Reddy

SAP Best Practices for CRM 5.0 is available

Hello,
I would like to announce the availability of SAP Best Practices for CRM 5.0.
SAP Best Practices for CRM allows a fast, safe and predictable implementation of pre-configured CRM business scenarios.
It can be used to accelerate customer implementation projects as well as setting up demo or evaluation systems.
For details about SAP Best Practices in general please see:
<a href="http://www.service.sap.com/bestpractices">http://www.service.sap.com/bestpractices</a>
For the concrete content of Best Practices for CRM 5.0 please see:
<a href="http://help.sap.com/bp_crmv150/CRM_DE/index.htm">http://help.sap.com/bp_crmv150/CRM_DE/index.htm</a>
Best regards,
Joerg

Hi Devendra!
For the Best Practices you can have all the useful installation and informations guides here.
<a href="http://help.sap.com/">Best Practices for SAP</a>
Choose here the Bast Practices tab on the line-menu.
You have to eb careful while installing the BP -> you have to use all the time the right BP release according to your SAP release.
I hope this helps you!
Best regards,
Zsolt

SAP Best Practice for Water Utilities on ERP2005

Hi All,
I want to load SAP Best Practice for Water Utilities on ERP2005. I have downloaded the package from Marketplace but there is NO transport file included on it. It only contains documentation. My questions are
1. Does anyone know where I can download the transport file, if any?
2. Should I use the transport file from Baseline Best Practice instead?
Thank you,
Bomo

Hello!
The file should contain eCATTs with data according to best practice preconfigured scenarios and transactions to install them.
Some information about preconfigured scenario you could find here:
http://help.sap.com/bp_waterutilv1600/index.htm -> Business Information -> Preconfigured Scenarios
Under the "Installation" path you could find "Scenario Installation Guide" for Water Utilities.
I hope it would be helpful.
Vladimir

Sap best practice for BW extarction -please provide me a new link

Hi experts,
I was trying to open this particular link -*SAP best practice for BW extraction,http://help.sap.com/bp_biv270/index.htm* was not able to open.Please any one provide me the new link.
Regards
Arunraj

Hello Ramesh,
you should have a look at the SAP Instguide, and if it tells you to do as your colleagues say, open a ticket to SAP and ask, whether doing it the otherw ay could have spoiled your system. Anything but an official "yes, it's ok" won't help you.
For the other guys: have a loook at http://service.sap.com/instguides, there you can find all the guides you need.
kind regards,
Carl

SAP Best practice for Material request form

Hai Sap gurus,
Do we have any sap best practice for material request form? If so please help me to find this best practice provided by the SAP. I searched through sap help but i was unable to find one.
Same way i also need to find the sap best practice for Change request form too...
Thanking you all in advance.

Hi,
Check these links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2b50ac90-0201-0010-d597-8d833833f9e0
and using the service market place link to down load the best practices
http://www.sap.com/services/bysubject/servsuptech/index.epx

SAP Best Practice for Chemicals in an oil refinery

Does anyone have experience in implementing the SAP Best Practice for Chemicals in an oil refinery that will also use IS-OIL?
What would be the pros and cons?
What is the implementation price of considering a best practice solution for a large complex organization?
Oded Dagan
Oil Refineries LTD.
Israel

Hi Oded,
I don't know about any Best Practice Chemicals implementation in an refinery so far.
But you can use Best Practice Chemicals with SAP IS-Oil for the non IS-Oil functionality as well.
Best Practice Chemicals gives you benefits within standard business processes, but for the
IS-Oil business processes you have to consider the traditon implementation methods.
Best Practice Chemicals gives you a broad business process set, usually used in Chemical
corporation. If you can cover 50% of your needed business processes out of Best Practice Chemicals you save approx 50% implementation time. It is not only implemenentation you save a lot in documentation and training material as well. Most of our Best Practice Chemicals implemenations used
60-80% out of Best Practice Chemicals. At a large corporation the percentage of standard ERP processes is normally smaller, because of other additional needed SAP solutions e.g. APO, SRM, CRM etc.
regards Rainer

SAP Best Practice for Chemicals

Does anyone have experience in implementing the SAP Best Practice for Chemicals in an oil refinery that will also use IS-OIL?
What would be the pros and cons?
What is the implementation price of considering a best practice solution for a large complex organization?
Oded Dagan
Oil Refineries LTD.
Israel

In Thailand there are companies such as PTT, PTTChem, IRPC which are all refineries that have implemented projects such as IS Oil. Why don't you start from there

SAP Best Practice for Water Utilities v 1.600

Hi All,
I want to install SAP Best Practice for Water Utilities v 1.600. I have downloaded the package (now available only Mat.No. 50079055 "Docu: SAP BP Water Utilities-V1.600") from Marketplace, but there is NO transport file included on it. It only contains documentation. Should I use the transport file from Best Practice for Utilities v 1.500?
Thank you,
Vladimir

Hello!
The file should contain eCATTs with data according to best practice preconfigured scenarios and transactions to install them.
Some information about preconfigured scenario you could find here:
http://help.sap.com/bp_waterutilv1600/index.htm -> Business Information -> Preconfigured Scenarios
Under the "Installation" path you could find "Scenario Installation Guide" for Water Utilities.
I hope it would be helpful.
Vladimir

SAP Best Practice for Discrete Manufacturing

Hi colleagues,
We are installing SAP BP for Discrete Manufacturing based on ECC 6.00. We have already installed the Baseline Layer 0. The problem we face now is that some of the building blocks required for Layer1 activation are not present amongst the ones already installed.
How does one get these missing building blocks?
Thank you.

Dear,
For detail information please refer the OSS notes,
1040010 and 1223033 - SAP Best Practices for Discrete Manufacturing V1.603 CN
Ensure that exactly the support package levels mentioned in the Quick Guide are implemented (not below and NOT HIGHER).
Regards,
R.rahmankar

SAP Best Practises for Logistic Modules

Similar Messages

Maybe you are looking for