SAP BEx - Reporing - Hierarchy - nodes repead the details

Hello out there,
I got the problem, that I want to create a BEx Query which got in the rows a characteristic with a hierarchy and below an oher one without hierarchy. For every different entity in the second characteristic I got the corresponding number of records under the sheet of the hierarchy. That is ok. In the notes of the hierarchy the system will not aggregate on the basis of the first characteristic entities. That is also ok, but in my case not required. I went through all the settings and checkt the help and the sdn without success.
The following solution is also not helpful:
- The second characteristic would be an attributes of the first one
A solution will be appreciated.
With kind regards,
Marco

Hello,
I want to achieve, that the nodes (hierarchy of the first characteristic) show one row with the aggregated value. So the entities of the second characteristic on the level of the sheets are not considered on the level of the corresponding nodes. With other words, the hierarchie shows only the detail of the second characteristics on the level of the sheets.
Hope this clarify my requirements. I appreciate any ideas.
Many Thanks and kind regards,
Marco
Edited by: Marco Schraner on Aug 25, 2011 5:51 PM
Edited by: Marco Schraner on Aug 25, 2011 5:53 PM
Edited by: Marco Schraner on Aug 25, 2011 5:54 PM
Edited by: Marco Schraner on Aug 25, 2011 5:54 PM

Similar Messages

  • Cannot Include and exclude selectiion on hierarchy node in the Filter area

    Hi,
    When i open the query and execute it. and select the filter area for hierarchy nodes. The include and exclude selection is disabled in 3.5x analyzer. We are using BI 7.0 with SP 12. we just upgraded.
    Can you please help. is this functionality not available?
    Regards,
    Gaurav

    Hi Rob, you can do that for the query (the exclude selection) on the Query Designer. But its not recomended on performance point of view.
    hope this helps
    Natalia.

  • Restrciting the hierarchy nodes in the transformations

    Hi
    I have "0ACCOUNT'  InfoObject in ODS and it's hierarchy.
    And it(0ACCOUNT)  has some accounts(4001, 4002, 4003) and other  reamining other fileds values .
    I want to restrict the '0ACCOUNT' values for some hierarchy nodes . How can i do this one in transformations .
    pls let me knpw
    kumar

    Hi kumar,
    use this link
    http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a563fe09411d2acb90000e829fbfe/content.htm
    with hopes,
    Raja singh

  • Selecting all hierarchy nodes in the report

    Hi Friends,
    In my report I have a Hierarchy 0ORGUNIT,  there are a few sub nodes under this hierarchy.
    When the user runs the report if they want to see all the  nodes under a top node, they have to  expand each node till the last node and select them one by one.
    My question is,  is it possible to select all the sub nodes under a node just by selecting the top node?.
    If yes can someone please let me know how to do this?.
    I did check the sdn, but could get anything.
    Thanks in adv.
    Regards
    BN

    Hi,
    You can do that for the initial display i.e. the very first time you execute the query but once you collapse all the nodes you will not be able to expand all the nodes with one click.
    For showing different levels in the first display go to the characteristic properties on which you have hierarchy maintained, in the hierarchy properties section set the option 'Expand to Level' and hierarchy will be expaned for all the nodes till the level you select.
    Regards,
    Durgesh.

  • Merging data from SAP BEx queries with SQL - Keys are details not Dimension

    I have a challenge when trying to merge data from a BEx query and a relational source in SQL Server.
    I have a characteristic for Material, with an associated Material key that is a attribute of Material in the BEx query.  On the SQL side I have a Material ID which is they unique identifier.
    So when you Merge Dimensions in a WebI report, it is exactly that merging dimensions,  so you link Material from BEx and Material ID from SQL.   However, on the Bex side Material displays a long text field which will never join to the data from SQL which is an ID.  The like for like objects are Material Key in BEx and Material ID in SQL, however, as Material Key from BEx is an attribute to manifests itself in WebI via a universe as a Detail object, which makes it unavailable for merging.
    I have tried to set the Material characteristic to display as KEY in the BEx query design, but alas it still comes through as a long text, hence still not able to merge data sets.
    Any workarounds ??
    Andrew

    Hi Andrew,
    In universe designer, edit the material key detail object. Copy the text that refers to the characteristic attribute in your BEx query. Create a new dimension (say, 'Material Key') and paste this text as the definition.
    Essentially you're turning a detail object into a dimension, which (in my limited experience) works just fine.
    Let me know how you go.
    DG

  • Allow user to type in the Hierarchy node value in Hierarchy node varaible

    Hi Experts,
    We are presently on NW2004s SP8 and we are moving on to SP10.
    We got the requirement in reporting...
    1.To allow the user to type in the Hierarchy node value in Hierarchy node variable manually.
    2. When user typing the Hierarchy node value into the Variable prompt, bring subtree by default.
    By default Hierarchy node variable prompt is grayed out and the user can only select the values from Input help(F4).
    I have put forward an SAP message on this topic earlier and got a reply that the manual entry of hierarchy node is not possible and there is no work around. User needs to select it from HELP. This is because the node value must be in a certain format which the users may not know.
    I just want to know from u Experts... is there any new feature available in SP09/10 or is there any other way to satisfy this requirement ?
    Thanks in Advance.
    Regards,
    Aparna

    We are able to manually enter in a hierarchy node in the selection screen.  The selection screen is not grayed out. 
    We are currently on SPS 009, but one difference could be that we are on a Bex 3.5 Patch 10 front end.

  • Process to change the order of the hierarchy nodes

    Hi,
    What is the process to change the order of the hierarchy nodes ( and associated attributes) through import manager? any pdf's or doc's regarding this?

    In Import Manager it is not possible to change the order of hierarchy nodes or the order of the linked attributes.
    Regards,
    Ronen

  • Reassignment of hierarchy nodes dynamically

    Hi Experts,
    I have a requirement wherein I need to re-assign the hierarchy node for an account based on Functional area.
    Currently, we load 0ACCOUNT info object with hierarchy defined in KDH3 transaction in R/3. Here, the account 650000000 is defined under local accounts node of the hierarchy. Hence, when we use the 0account infobject in BEx with hierarchy activated, all the records in transaction data with account no. 650000000 are aggregated under local accounts node.
    However, the user wants us to check the functional area for each of the record with 65000000 account and re-assign it to a different node of the hierarchy. For example, if the transaction data has account number 65000000 and functional area 400, then the record needs to be aggregated under a different node in hierarchy, say overhead costs. Similarly, if there is another record with account 650000000 and functional area 300, then the record needs to be aggregated under Sales & marketing.
    How do we handle such conditional assignment of hierarchy nodes?
    Regards,
    SS

    Hi,
    I really doubt if dynamic reassignment of hierarchy nodes is possible in BW, but could be wrong.
    Alternatives which you can consider
    a. A flat hierarchy modeled in the dimension of the cube i.e. higher levels of 0ACCOUNT can be filled during transformations based on functional area. Major disadvantage here is that any change to the hierarchy or assignment could require reloads depending on your requirement i.e. touch history data or not
    b.Customized Hierarchy created by combining the original hierarchy and the assignment details
    for eg 
    Leaf Node: 650000000_400 under parent Overhead Costs
    Leaf Node: 650000000_300,under parent Sales & Marketing
    Regards,
    Advait

  • Locking hierarchy node

    Hi everybody,
    i have a problem with locking hierarchy nodes in the BEx (integrated planning). I have to show a certain hierarchy in the rows and i also have to select a certain node of this hierarchy before. Therefore i create an editable variable for this charactristic. After selecting a certain node of this hierarchy all nodes of this hierarchy will be locked so that nobody else is able to plan on this hierarchy. In my opinion it is not a normal reaction of the system. I really expect that only the selected hierarchy node and all the nodes assigning to this node must be locked, but not all the nodes of the hierarchy. Am i right? Has someone had the same experience? Is it probably a bug?
    I really look forward to getting an answer.
    Thanks in advance.
    Ali

    Hi Ali,
    locks depend on the selection used in the filter of the query (or restrictions in structure members). So make sure that your restrictions are in the filter (the default values play no role). In the filter you can use select options or hierarchy nodes (this is then called a selection hierarchy).
    If you are only using a presentation hierarchy this has not effect on locks.
    Remarks: If a selection hierarchy is used in a filter the characteristic values with respect to the hierarchy base characteristic will be resolved, i.e. in RSPLSE you will see (maybe long) lists of single values.
    Regards,
    Gregor

  • Different colors for hierarchy nodes in WEBI 4.0 (Possible or not)

    Hi Everyone,
    We have been listening a lot about the capability of Webi 4.0 in terms of Hierarchies from BW BEx Query. It works just fine like in BEx Analyzer, but is it possible to create formatted reports like we do in Crystal reports to display different colors for the hierarchy nodes. The reason for asking about this functionality is though Crystal Enterprise also inherits Hierarchical view from BEx Query we still won't be able to drill down in real time to do some interactive analysis.
    Where as Webi 4.0 can allow us to do interactive analysis by allowing us to drill down on the hierarchies, but it would be great to show the Webi report with different colors for the hierarchy nodes along with the drill down functionality, to give users the best look and feel while working with these reports.
    I am trying to achieve this functionality but I am not successful yet and running out of ideas. I am also not sure if this is possible or not. Can anyone throw some light or share there thoughts on this.
    Any comments will be greatly appreciated.
    Thanks & Regards,
    SRV

    Create a variable with:
         =[Object].Depth
    where [Object] has to be the one containing the BEx hierarchy.
    This function will return the hierarchy level starting with 0 (zero).
    You can use the value of the variable the in the formatting rules:
    variable   equal   [hierarchy level]
    to format all hierarchy nodes on the given level.
    R. Uli

  • Filter value on hierarchy node in Business Explorer Analyser

    Hi experts,
    I'm facing an issue in BI 70 SP 10.
    I'm using Business Explorer release 3500.11.051.
    In a query, when I set a filter value on a hierarchy node, all the hierarchy is available and i can choose my node.
    Now, i want to change of filter value but only the previous selected node is available in the filter popup. I need to remove the filter value to choose a new one.
    Need your help.
    Jacques

    HI,
    The attribute is: Only Posted values for navigation.
    We didn' t change that and it worked in 3.0B
    Jacques

  • Select key date of time-dependent hierarchy before select a hierarchy node

    Hello experts!
    I have a Web Application which has a selection on 0ORGUNIT (organizational unit). The selection is on hierarchy nodes and the hierarchy is time-dependent.
    Because of the time-dependency I have to give a key date for the hierarchy. But I want to select the key date at runtime/execution of the query and additionally I want to select the hierarchy node and other selection criterias.
    Maybe there is a solution to get all this in one pop-up or maybe in two or another solution how I can implement this requirement.
    Thanks for help!
    Peter

    Hey!
    You don't have to use the same presentation-hierarchy like  the selection-hierarchy is which you use for the variable. While presentation-hierarchy always has a key-date, the selection-hierarchy has none. So you see all values for selection but just this which are valid for the presentation-hierarchy are selected. And there is a warning which you can supress over RSRT.
    This solution works for our problem, maybe not for yours, don't know.
    Best regards,
    Peter

  • Hierarchy node variable in BPS planning level

    Hi gurus,
    I have a set of planning levels and packages that are meant for all users. The users currently are segregated by 0costcenter hierarchy nodes, i.e. groups of users are belonging to different nodes within the 0costcenter hierarchy. These group of users each have its respective authorisation profile assigned based on hierarchy node.
    The planning levels and packages are configured so that 0costcenter is one of the header characteristics in the layout.
    Is there a way for the characteristic 0costcenter in the planning level and packages to derive the cost centers from the authorisation profiles ?
    Advice appreciated.
    Thanks.

    You may consider any of the following:
    1. BPS variables with authorization replacement type.
    2. BPS variables with user defined values replacement type.
    Ravi Thothadri

  • 0GLACCEXT hierarchy nodes description ( text ) not displaying

    Hi Gurus,
    I have uploaded 0GLACCEXT hierarchy from ECC system in to BI 7.0. I can only see the hierarchy nodes in the RSH1 and in the reports as well for 0GLACCEXT.But I am not able to see the hierarchy nodes description like under Expenses > salaries , wages , housing etc .....only its GL accounts is displaying like 700100 , 700200
    I also uploaded Text datasource ( 0GL_ACCOUNT_TEXT ) for 0GLACCEXT , the text is loading without any problem but the changes are not being reflected in the RSH1 and the reports.
    Regards,
    -Neha

    Hi KP,
    Thanks for your reply , the text for 0GL_ACCOUNT is displaying fine , I don't have any issues with 0GL_ACCOUNT , my main concern is I'm using Financial Statement item 0GLACCEXT   for Balance Sheet and P&L Statement (for period accounting) by using Virtual Cube 0FIGL_VC1  the Text is not displaying in the reports as well as in RSH1 , where as for 0GL_ACCOUNT the hierarchies and text are working and displaying fine.
    I'm closing this thread , the problem has been solved
    it was related to mappings in Transfer rules.
    Regards,
    -Neha
    Edited by: Nehabibo on Dec 18, 2010 11:46 AM
    Edited by: Nehabibo on Dec 18, 2010 11:47 AM

  • Run Time Error when trying to select hierarchy node

    Hy all,
    the situation is the following:
    i attempt to create a variable of type "hierarchy node" (for cost center cha) in my planning area, i used the replacement type "user defined value", check on "input allowed by user" and then i create the user entry, in selection condition i run match code and when i try to select a single cost center (not a hierarchy node) expanding the hierarchy tree the system goes dump with the following message:
    Runtime Errors         MESSAGE_TYPE_X
    Error analysis
    Short text of error message:
    Program is inconsistent -> see long text
    Technical information about the message:
    Diagnosis:
    An inconsistent program status has occurred. The program cannot be continued.
    System response:
    The system crashes.
    Procedure
             1.  Look in OSS for a note under the error message UPC099.
             2.  When you open a problem message, send the first pages of the
                 system crash message including the section 'Source code excerpt
                 ' with the message.
         Procedure for System Administration
        Message classe...... "UPC"
        Number.............. 099
    Selecting a hierarchy node (not a single cost center but a text node grouping more cost conter) this problem does not occur.
    I appreciate (and reward) any hints.
    Thanks in advance
    Fabio

    Hi,
    Go through the oss notes with error message UPC099
    Dump during hierarchy selection:<b>536694</b>
    Dump when reading a hierarchy with intervals :<b>423953</b>
    Regards-
    Siddhu
    Message was edited by: sidhartha

Maybe you are looking for