SAP BeX WAD URL not working on Black Berry Emulator
Hi All,
I web report which is running successfully on Windows XP browsers. But when I am going to use same url for Black Berry emulator its not working for that. Can Some one please Help me on this?
I tried same url on Windows CE emulator also but was getting same error.
Regards,
Abhishek Jain
The error that I was getting for above is "Something Didn't work quite right and we are unable to show the page you requested right now. Rest assured, Google Engineers are already springing into action to solve the problem."
Edited by: Abhi4SAP on Jan 12, 2010 8:06 AM
Similar Messages
-
Bex Query is not working in portal
Dear Experts,
i have uploaded BI master role into portal, By default Bex Queries are assgined to Master Role. when I clcik on preview for particular Bex Query, it's working fine. but after assigning the master role to end user, that same Bex Query is not working. it's showing Below error..
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 05:22_18/08/10_0002_7116150
Refer to the log file for details about this exception.
please give me suggetions...
Regards,
VENUHi Venu ,
Can you please check the logs for details - http(s):<host>:<port>/nwa . This may be a permissions issue . Check if the iview has read permission for everyone group and then test . Also post the error details here .
Regards
Mayank -
I bought a new 5s and its front and back camera are not working, showing black image. My phone is IOS 7.1.2 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest.
I have the same issue on my iPhone 5s
I've closed the app and re-booted the phone several times but it did not resolve the issue.
Upgrading to iOS 8.0.2 did not resolve it either.
Erasing the iPhone and restoring from a backup did not resolve it.
I'm not sure what else to do. -
I bought a new iPhone 5s and its front and back camera are not working, showing black image. My phone is IOS 7 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest on this. Will this resolve my issue?
any advise..?
-
Hi experts,
i had a BEx Query in 3.5 that was displayed in BEx WAD 3.5
i have saved the Query in BEx 7 and created a WAD 7
in the query the were some exceptions on a key figure.
in WAD 3.5 on the query or in RSRT the exception works and displayed.
if i run the query (Query Designer 7) or the WAD 7 on the query,
the exceptions does not works and not displayed.
i am working in BW 7.01, SP 10.
and Portal 7.01 SP 7.
Thanks in advanced,
Or.Hi,
You need to create the exception in portal side.
Status Exception:
This exception affects result cells. This setting is especially suitable
for absolute keyfigures. If you set a dynamic filter for any
characteristic used in the query, the exception will not be applied to
the result cells as the result changes and invalidates the exception
threshold defined. You can always override this behaviour for a specific
characteristic by defining a characteristic context. You can do this in
the query designer itself or in the exception wizard during runtime
(step 5 in the wizard or tab 'Cell Restrictions' in the Query Designer).
Trend Exception:
This exception affects all cells. This setting is especially suitable
for relative keyfigures. If you now set a dynamic filter for any default
characteristic, the exception will be applied to the result cells.
However, if you have defined a characteristic context (Cell
Restrictions) with 'Totals Only' for a specific charecteristic and you
now set a dynamic filter for it, the exception will not be applied to
the result cells.
http://help.sap.com/saphelp_nw70/helpdata/EN/43/21b4cd14cd06f4e10000000a422035/frameset.htm
Thanks,
Venkat -
MS Excel in the Bex Analyzer is not working
HI
If I start Bex Analyzer (BI7.0) , MS Excel is not working.
So There is no userid pop screen on the MS Excel Screen.
Whats' wrong ?Hi,
Which version of excel are you using?
Try with the SAP GUI 7.10 with the latest SAP BI Addon Component. You can download it from SAP Service Market place.
Downloads - Support Packages and Patches - Entry by Application Group - SAP Frontend Components - BI ADDON FOR SAP GUI - BI 7.0 ADDON FOR SAP GUI 7.10 .
The latest patch level for SAP BI Addon Component is 1300 (bi710sp13_1300-10004472.exe).
Hope this helps.
Regards,
Hari. -
SAP NetWeaver BW Connection not working for SBOP4.0
Hello Experts,
Following are the steps & current patches:
SBOP 4.0
Dashboard Design , version: 6.0.0.0
SAP Logon
Release : 720
Patch: 5
1. SAP BW & NetWeaver Portal are not SSO(Single Sign-on)
2. I open the Dashboard Designer
3. Click on "Manage Connection"
4. Select 'SAP NetWeaver BW Connection'
5. It pops-up the Log-on screen
6. Pass on the required information
7. Use the query browser & selected the query
8. it takes the query with no error message
Issue:
1. It is not showing the Input values & Output values
Not able to display the BW Bex Query element using Dashboard Designer - SAP NetWeaver BW Connection.
Please let me know if we are missing any config. or step.
Thanks
MahendraThanks Amit for your suggestions. I tried the below steps & still it is not working:
1. re-installed Adobe version 10.1
2. Tried to connect the BW Bex query using SAP NetWeaver BW connection.
3. I am getting no error but Dashboard designer is not able to display the Input values & Output values of the BW BEx query
As I had mentioned you earlier that when I open the Bex report using the designer using the IE, it calls the portal window & I have to enter the LDAP password then the report opens in the portal.
So I think as our BW & portal are not configured as SSO so when the Dashboard designer tried to load the query from the xml file it fails. It may be because it required my LDAP login credentials.
Please let me know your suggestions.
Thanks
Mahendra -
Application URL not working properly
We have a custom application hosted on weblogic8.1 cluster. And this is in production environment.
What we observed was, I am using FireFox browser and works fine for me. And I noticed it did not work a few days ago only once. However, most of the other users use IE6.0 and seems not able to access this URL. So some tried using IE 7.0 and worked fine for some time. But, the problem persisted very often as few can and others cannot.
Can anybody tell me what could be the problem or should I be modifying any files in weblogic server.
This is working pretty fine in testing environement.Thank you very much for the hint, though I have not tried your suggestion. I tried a little more and found the following way might be simpler - using "java.url.*" and "java.io.*". Just a simple test:
============================
URL url=new URL("ftp://usrname:password@hostname/localDirectory/filename.txt");
InputStream is=url.openStream();
BufferedReader in=new BufferedReader(new InputStreamReader(is));
String line;
while((line=in.readLine()) !=null) { System.out.println(line);
==========================================
Of course, other data format would work in a similar way.
Cheers,
ljiang001 -
Custom Filter in Universe on top of BEX Query is not working in BO Explorer?
Hi,
I have created Condition(Filter) for an Dimension Object "Submitted by Group Hierarchy" in Universe designer tool on top of SAP BEx Query and then exported the universe to Repository.
<FILTER KEY="@Select(Submitted By Group Hierarchy\L01 Submitted By Group Hierarchy).[TECH_NAME]"><CONDITION OPERATORCONDITION="InList"><CONSTANT CAPTION="@Prompt('Submitted By Group ','A',' Submitted By Group Hierarchy\L01 Submitted By Group Hierarchy',multi,primary_key,,{‘Direct Sales’)"/></CONDITION></FILTER>
To test my custom filter , I have created WEBI report and its allowing input entry in my custom filter and output is also coming .
where as in Explorer, i am not able to enter input values for my custom filter as below.
Can anyone suggest me how to create custom filter in universe and use it in explorer.
Thanks in advance.
Regards,
Ramana.Hi Ramana,
Please try using 'mono' in place of multi in @prompt syntax and then test.
Regards,
Pranay Sharma -
Web Cache 'Ping URL' not working.
Hi,
I have recently installed a Webcache clustered pair which sit in front of OHS which reverse proxys back to OUCM/Web Logic, my OWC version is 11.1.1.2 and am looking for some clarification of how the Ping URL actually works in Web Cache.
When OHS is shutdown, Webcache detects the service is down and prevents it from servicing requests, however it will not mark the service as down when I intentionally set ping URL to a page that does not exist generating a 404, will Ping URL polling only mark a server as being down if a 500 error is generated?
Something else I would like clarification of is 'Ping Interval', I have set this to be aggressive at '1' however I do not see any polling traffic or see any hits in OHS log that indicate polling of the Ping URL is taking place.
Thanks in advance,
Mark.Not sure I need any update to this now, I've just read through the help section 'help/edit_add_appserver.htm' and can see that a 404 is not considered a failure and also that the server only starts to poll when the failover threshold has been reached.
This would explain why the server was not being marked as down, although I'm still not sure why I do not see the polling traffic in Apache logs but I can live with that :)
Cheers,
Mark. -
Some URL not working in XI 3.1
Hi,
URL below which is working in XI R2
http://serverName/businessobjects/enterprise115/desktoplaunch/opendoc/documentXML.jsp?cmdP1=reportname01wid*&token=servername%40715252JKRqBkrcZktGziHM715251JzcHaz61ShIdevCP&cmd=askPromptView&cmdBlock=all&cmdP2=lsSP22%3D1%26lsSP21%3D1%26lsSP20%3D1%26lsSP9%3D0%26lsSP8%3D1%26lsSP7%3D1%26lsSP6%3D1%26lsSP5%3D1%26lsSP4%3D1%26lsSP3%3D1%26lsSP2%3D1%26lsMRMDB%3D582%26lsSP1%3D1%26lsSP19%3D1%26lsSP18%3D1%26lsSP17%3D1%26lsSP16%3D0%26lsSP15%3D0%26lsSP14%3D0%26lsSP13%3D1%26lsSP12%3D1%26lsSP11%3D0%26lsSP10%3D1%26lsMCustomer%3D18946%26sWindow%3DNew%26sOutputFormat%3DPDF
We recently migrated to BOXI 3.1 but the New URL i have created for XI 3.1 which is not working and show blank page and display NULL on the page..
http://servername/PerformanceManagement/scripts/documentXML.jsp?cmdP1=reportname01wid*&token=servername%40715252JKRqBkrcZktGziHM715251JzcHaz61ShIdevCP&cmd=askPromptView&cmdBlock=all&cmdP2=lsSP22%3D1%26lsSP21%3D1%26lsSP20%3D1%26lsSP9%3D0%26lsSP8%3D1%26lsSP7%3D1%26lsSP6%3D1%26lsSP5%3D1%26lsSP4%3D1%26lsSP3%3D1%26lsSP2%3D1%26lsMRMDB%3D582%26lsSP1%3D1%26lsSP19%3D1%26lsSP18%3D1%26lsSP17%3D1%26lsSP16%3D0%26lsSP15%3D0%26lsSP14%3D0%26lsSP13%3D1%26lsSP12%3D1%26lsSP11%3D0%26lsSP10%3D1%26lsMCustomer%3D18946%26sWindow%3DNew%26sOutputFormat%3DPDF
Can anyone please help and give me some idea ?
Thanks in advance.Hi RMTuck,
I'm sorry to hear you are having these issues with your iPad after a recent update. If you continue to have issues sending or receiving iMessages, you may find the troubleshooting steps outlined in the following article helpful:
If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden -
MobileMe Gallery URL Not working
All of my MobileMe Gallery URL's in iPhoto do not work and contain '(null)' as in:
http://gallery.me.com(null)/username/100016
If I remove '(null)' it works fine. Anyone else have this problem?
Thanks!First delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder, republish the galleries and see if the URL gets changed.
If not create a new gallery with the same photos from one of the existing galleries, name it the same as the old one, delete the existing gallery and publish the new one. See if that will generate correct URLs. The URL may change so you may have to re-announce it to your friends.
OT -
Link to URL not working in RH X5
Good morning,
A client asked me to include a hyperlink to an internal site of theirs. After I gave them the WebHelp, they said the link doesn't work (I can't test it here as I work offsite without access to their intranet). They said there is a space missing which would account for it not working. The problem is I copied and pasted the URL into the project from the client's email. Here is the URL copied from the client's email to me - you can see the 2 spaces between ACH and Forms. :
http://sharepoint.myfirstnet.com/TreasuryManagement/ACH%20%20Forms/Product%20Information/T raining/ACH_SEC%20Explained.doc
When I right-click on the link in my topic and check the link properties and when I look at the code on the True Code tab, I can see the 2 spaces (not the code for the spaces, of course, but you can tell there is an extra space) so assumed all was well. Yet on the client's end there is only a single space. And if I copy the link from the True Code tab in RH and past it here, for example, or into an email, it comes out like this:
http://sharepoint.myfirstnet.com/TreasuryManagement/ACH Forms/Product Information/Training/ACH_SEC Explained.doc
The double space has been replaced with a single space. I can't explain how or why that would be changed after I put in the hyperlink. Is there something about HTML or RH in particular that doesn't allow double spaces so removes one?
Thanks for any help.
DianeHave you tried %20%20 in the code rather than spaces?
Just a guess.
See if that works in RoboHelp's viewer.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
CTI - SAP CRM & SAP BCM: ANI does not work in SAP standard
Hello Experts,
our customer wants to work with a CTI in SAP CRM WebUI Role (Non IC; CEBP).
For the CTI the SAP CRM 7.0 (on HANA) and SAP BCM where itegrated.
We are using the Slim Communication Toolbar as recommended by SAP.
The Problem ist that the ANI (Automatic Number Identification) does not work.
The Callers Number is not identified. Function Module BUPA_SEARCH2 is not called.
No Changes were made in this area. We are completely using the SAP standard.
Has anybody experienced issues related to this one?
It would be great if somebody could give me some help and/or information!
Thank you!
Kind Regards
Martin GaschkHello Andrei,
the issue was solved by SAP.
The relevant startup component for ANI in the CMS integration profile (Tx CRM_IC_FW_PROF) was inactive:
Component:
BUSINESS PARTNER IDENTIFICATION
Class:
CL_CRM_IC_FW_BP_SEARCH_SRV
Thanks for your support!
Kind regards
Martin -
Lumia 620 , Flash Not Working after Black update from "Preview For Developer"
Downloaded the app " Preview for Developers" and checked the phone updates, It showed that one update is ready to install. Now when i update the mobile (Lumia Black Update) the flashlight of camera is not working anymore. Plz suggest
For problems with the hardware I'd probably ask over here.
http://discussions.nokia.com/t5/Nokia-Lumia/bd-p/Nokia_with_Windows_Phone
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Maybe you are looking for
-
ADF Event and Tomcat 5.0.16 Error
I've deployed an ADF application to a Tomcat 5.0.16 server. I noticed the Tomcat logs contain this error: 2004-10-28 13:38:27 StandardContext[HETA]No Method onAddAccounting and no actionBinding AddAccounting found. I've got a JSP with an Add Accounti
-
Quicktime/Snow Leopard/External HDD Sleeping
Hello, I recently bought a Mac Mini - very happy with it so far, however i have now got one small problem... I previously had a PC with WinXP on it, and i stored loads of college and work related odds and sods on my WD 500Gb External HDD. So i connec
-
Managed user account, the dock, and the full finder?
I am creating a simple lab for school (26 computers wired together with CAT 6 switchers and no server...just me as the admin account) and will be creating managed accounts for each period. When I have been testing this, logging in as a student, I can
-
Adding a column in infotype(table control)
i want to add a column in table control of infotype 0591. i need to add age for every nominee. i cant edit standard sap mp prog. so i thouhgt of copying it into zprogram, and now i have to assign it to that standard infotype so that this infotype wil
-
Very Urgent: Invalid number in database
We are getting an invalid number error on a date field in a Form that has run this procedure for two years. The query is something like select max(upload_date) from pfe_time_report where ssn = :block_update.ssn. We think that an invalid number has be