SAP BI 4.0 Installation on Linux Machines

Hi,
Can some body send me the document or Detailed steps regarding how to install the SAP BI 4.0 software on the Linux machines.also let me know what are the pre-requisites for this installation.
This software needs to be installed in both Server and Clinets as well.
Kindly consider it as a bit urgent and send me the details.
Thanking you in Advance,
Warm Regards,
Naga Nanda Kishore.

Hi Nanda,
Please refer the below link for SAP BI 4.0 Installation on Linux Machines.
Linux System Landscape Overview
Link:
http://wiki.scn.sap.com/wiki/display/BOBJ/Linux+System+Landscape+Overview
Linux Pattern Prerequisites
Link:
http://wiki.scn.sap.com/wiki/display/BOBJ/Linux+Pattern+Prerequisites
Business Objects Installation:
(a) Setting up BI platform server 1
(b) Setting up BI platform server 2
(c) Changing the Linux Pattern Cluster Name
Link:
http://wiki.scn.sap.com/wiki/display/BOBJ/Setting+up+BI+platform+server+1?original_fqdn=wiki.sdn.sap.com
Regards,
Daya Jha

Similar Messages

Not able to acess SOA consoles after SOA 10G installation on Linux machine

Hi,
We have done SOA 10G installation on VM ware machine which was configured on a windows box. After installation we are able to access the BPEL/ESB/EM consoles directly from the server where the installation is done but not able to access the same from our local machine.
Please advice.
Thanks & Regards,

How do you try to access console? what url do you use?
From what components you want to check the ports asigned? Only Oc4j's, webcache, http_server and oid should show something here.
Did you check the file $OH/install/portlist.ini and opmn.xml, rmi.xml?
Regards.

Installer for Linux machine

Hi ,
I have developed a Desktop applicaiton in java , this is my first application ,now i want to make an installer for that to install it on linux and test it there.
How to create setup for it???

Hello,
I used IzPack with success. I found out it was relatively easy to understand and implement, though it does not check automatically for JRE (you must have JRE to lauch the installer)
sunjavero

Analysing SAP Java Memory Usage in Unix/Linux

Hi,
I need to analyze the SAP Java memory usage of Unix /Linux machine..NW 7.0
Please guide with the commands and steps..complete prcedure.
Based on it I should decide whether to create a new server node (or) increasing heap size
Thanks in advance

Hi,
Do you have performance problems?
How many CPU's are in the server?
Did you check Log Configuration for delays or errors?
Did you tune any exisiting parameters?
You can add the nodes only if there is performance problems. You may think of adding one node to start with
Proper number of server nodes within an instance:
u2013 #ServerNodes = availableMemory / (JavaHeapPermSpaceStack)
You can calculate the server nodes based on below formula
No. of server Node = (RAM you want to assign or available RAM in GB)/2.5 ============> for 64-bit system
No. of server Node = (RAM you want to assign or available RAM in GB)/1.5 ============> for 32-bit system
Hence as per above discussion, we should go with 5 server nodes means,
5 = RAM/2.5 (Assuming you are on 64-bit platform)
i.e. RAM = 12.5 GB
2). u2013 Configure JVM heap according to Note 723909 and Note 1008311 - Recommended Settings for NW 7.0 >= SR2 for the AIX JVM (J9)

Cannot bring up the SAP ERP 6.0 Installer GUI on a linux redhat 5.4 machine

Hi,
I'm trying to install the SAP ERP 6.0 on a Linux Redhat 5.4 machine and the gui for the install does not come up
Here is the message
sudo ./sapinst
Password:
[==============================] \ extracting... done!
Starting GuiServer using:
/usr/bin/java -Xmx256M -Djava.security.egd=file:/dev/urandom -cp /tmp/sapinst_exe.24750.1283972427/JAR/instgui.jar:/tmp/sapinst_exe.24750.1283972427/JAR/inqmyxml.jar SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
init: retrieving account information for group sapinst...
init: retrieving account information done.
load resource pool /remote/repeng5/SAP/sd_benchmark/Extracted/BS_2005_SR3_SAP_Installation_Master/IM_LINUX_X86_64/resourcepool.xml
guiengine: No GUI server connected; waiting for a connection on host inspired.sybase.com, port 21200 to continue with the installation
My env. is the following
java -version
java version "1.6.0"
OpenJDK Runtime Environment (build 1.6.0-b09)
OpenJDK 64-Bit Server VM (build 1.6.0-b09, mixed mode)
Memory in the machine is 16 GB. I have tried bringing up the installer on a different linux redhat 5.4 machine and there are no issues there
Any help/pointers would be greatly appreciated

Thank you both for your reponse.
I did try changing the java to 1.4.2 but I still get the same behaviour. The gui just hangs.
Here's my new env.
java -version
java version "1.4.2"
gij (GNU libgcj) version 4.1.2 20080704 (Red Hat 4.1.2-46)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

SOA Suite Installation on Linux 64 bit machine

Hi,
I have to install Oracle SOA Suite 11.1.1.5 on a Linux 64 bit machine. I want to install Oracle SOA Suite 11.1.1.5 version on the machine because any version above will not be supported on my machine. Here is the list of components I want to install.
1. Oracle Database
2. Weblogic server
3. RCU
4. SOA Suite
5. JDeveloper extension
7. BPM extension
8. Oracle Service Bus
Can anybody tell me where can I get the downloadables for these components for Oracle SOA Suite 11.1.1.5 which is Linux 64 bit compatible. I searched the Oracle website but can't find it anywhere? I also looked at edeilivery site of oracle, but no luck. However, if anybody has the URL's to directly download it, then please share.
Thanks,
Saurabh G

Anuj,
Thanks for your response. I can't raise an SR with Oracle since I am learning this on my own.
However to answer your question, I am using Processor AMD, 1.6GhZ with 4 GB RAM.
I have made my system dual boot with Windows 7 and Suse Linux 12.3, both 64 bit operating systems
I have tried to install 11.1.1.6 on my system on windows but the installation got hanged. And when I went for 11.1.1.5 on windows, the installation was smooth and I have it installed on windows7. But now I want to learn to install it on Linux machine also thats why I am asking for 11.1.1.5 downloadables.
Thanks,
Saurabh G
Edited by: Saurabh G on 03-May-2013 22:11

Two SAP installation in one machine

Dear Experts
SAP ECC6 EHP4 READY
DB2
HP-UX
i have a requirment to install DEV and QAS server in single server. i already installed the DEV server. now i need to install the QAS server my query is what the prerequisite i need to fallow before starting the QAS server installation. and i there any file which need to be modifi. ITS my first time to work on this kind of landscape. kindly guide me.
i have the below file system.
/sapmnt/DEV
/db2/DEV/sapdata1
/db2/DEV/sapdata2
/db2/DEV/sapdata3
/db2/DEV/sapdata4
/db2/DEV/saptemp1
/db2/DEV/db2dump
/db2/DEV/log_dir
/db2/db2dev
/db2/DEV/db2dev
/db2/log_archive/
/db2/log_retrieve
/db2dev
/usr/sap/DEV/DVEBMGS00
/usr/sap/trans
/sapmnt/QAS
/db2/QAS/sapdata1
/db2/QAS/sapdata2
/db2/QAS/sapdata3
/db2/QAS/sapdata4
/db2/QAS/saptemp1
/db2/QAS/db2dump
/db2/QAS/log_dir
/db2/db2qas
/db2/QAS/db2qas
/db2qas
/usr/sap/QAS/DVEBMGS01
/sapdump
thanks/regards
sadiq

Dear Sadiq,
From DB point of view there is no problem to install two separate databases
of DB2 on one machine. The DB2 source files are installed into different directories and will not
impact each other.
After installing the software, the DB2 instance called "db2<SID>' is
created with the DB2 version you choose. The installation procedure
depends on the SAP release.
Whether of not your machine is able to handle both systems running on one server depends on
the hardware and settings.
Regards,
Paul

How to bind an IIS to the enterprise portal installed on a linux machine

Dear all,
I am very new to the topic of Enterprise Portal.
Our intention is, to develop .NET IViews and deploy them in the Enterprise Portal.
The Enterprise Portal Server is set up on a linux machine.
The Guy who did install the Portal Server, has no idea how to "integrate" the Microsoft IIS to the Portal.
After deploying my .net Component, i tried to view this component in the portal (by right clicking the mouse on the Component in in the .NET Solutions Explorer).
This gives me the following error:
Portal Runtime Error
An exception occured while processing a request for:
iView:N/A
Component Name: N/A
Could not find portal application com.sap.portal.dotnet.framework.
Exception id: 02:06.......
See the details for the exception ID in the log file
I think that this has something in common with integrating the IIS on the Linux Machine, and maybe additionaly installing the pdk.net on the IIS webserver machine which should be used.
Thank you for your help.
Regards

Hi,
Welcome to the world of Enterprise portal
Seems to me like you are trying to use the PDK for .NET. If so - Please read the overview section in the documentation to get a general idea of how it works (for example - IIS is not used at all!).
See the Visual Studio integrated help or click this https://media.sdn.sap.com/html/submitted_docs/dotnet/index.htm
there go to "Getting Started" and mostly "Overview".
Anyway, It seems like the problem is that you didn't deploy the 2 required SDA's to the portal. You should also take a look at the "installation and configuration" guide. Download it here: https://www.sdn.sap.com/sdn/developerareas/dotnet.sdn?contenttype=url&content=/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/pdk for .net administrator guides.zip
Good luck,
Ofer

Voting Thread for the SAP NetWeaver ABAP Developer Edition for Linux

Hi Everyone,
as Mario Herger suggested in the discussion to his Blog [New Community Developer License is available|/people/mario.herger/blog/2010/01/20/new-community-developer-license-is-available] I start the topic requesting a SAP NetWeaver ABAP Developer Edition for Linux.
Best regards
Gregor

I think having a pre-packaged VMWare machine running on Windows or Linux would be great as it would help a lot of the non-Basis consultants get a system up and running. Perhaps even offer it as an AMI package on AWS so that hardware is not an issue.
I'd also like to see the traditional installation packages offered as many technical consultants use the build as a process to look at installation issue and post installation configuration.
I think both the pre-built and build it from scratch approaches have an audience here on SDN and I'd like to see both being offered.
In fact I'm just looking at the new license options one of which come with the DVD's which is ideal but at a price!
Thanks,
George M-A

Problem with java installation on Linux

HI ,
I am trying to install jdk on Linux..I am new to java and Linux both. I am trying to download the file for the linux installation onto my home PC(windows XP) and then ftp it to my Linux machine. I need to do this because I have a remote login to my Linux machine( a server at school). However when I try to download file my IE jsut crashes. I can see the page for accepting the Agreement but when I click on Accept the next page just stops responding.
Could someone explain why this is happening.
thanks,
G.

The problem doesn't have to do anything with Java or Linux as far as i can see. It's more likely a problem with Windows XP and IE. Be assured that normally downloading the Linux JDK in windows is not a problem.

Installation on linux problem

Hello,
I just installed j2sdk-1_4_0_02-fcs-linux-i586.rpm on my linux machine as the instruction says. After installation, I run "java -version" to see if it works. It complains, "command not found". The instruction does not say any thing about setting JAVA_HOME or any thing like that. Do I have to set it. If so, what file do i need to set in. Using root or regular user?
Thanks

Yes.
You need to set JAVA_HOME, CLASSPATH and PATH in a file called "/etc/profile.d/java.sh". This topic has been covered previously, in the last few weeks, so look at the threads in the archive for full details.
Bhav

A few questions re: installing 10g on a virtual linux machine

I am in the process of building up a virtual linux box on my XP laptop and have a few questions regarding the networking setup. Purpose is to have a sandbox *nix setup at my fingertips.
Here's what I have so far:
Dell Latitude laptop running Win XP. This is a DHCP machine.
Installed VMWare Player
Created virtual machine with OEL 4.8, with NAT network config
So far, so good. Next step is to install 10.2.0.4 EE on the virtual Linux machine. When installing 10.2.0.4 directly on the XP system, of course I had to install a loopback adapter to provide a fixed IP address for Oracle, all well documented in the installation guide. While it is my understanding that the loopback adapter, as installed and configured on Windows, is primarily a Windows issue, I would expect something of the same fundamental under Linux insomuch as it is still a dhcp machine. However, when checking the relevant installation guide, the section on networking considerations and DHCP simply gave a two-paragraph discussion of what DHCP was. I found no discussion on how to deal with it in a *nix environment.
This particular vmware setup gives me a choice of 3 network configs - Bridged , NAT, or host-only (private vitrual net shared only with the host) I am currently configured to use NAT because I need outside connectivity (to yum server, etc) but do not want an additional device (ip address) on the real network. I'm guessing I could use host-only most of the time and when I need to access the internet, shut down the db and switch back to NAT.
This is all new territory for me, so I guess I'm looking at some 'best practices' advice as much as anything.

Ed,
I would encourage going for OEL 5u2 or 5u3 and including the oracle-validated package. It makes sure you have all the prerequisites for 10gR2 and makes life much easier.
I set up dozens of these machines for Oracle U classes. What I started with originally is 2 virtual NIC - a NAT and a Bridged. The Bridged allowed me to access the outside world at any time and was assigned using DHCP from the local network. The NAT I'd configure manually as a static IP, and I used it primarily to provide a second 'virtual network' so the classroom machines could communicate with each other.
In my latest iteration, I've dropped back to a single Bridged NIC based on DHCP. For Oracle install purposes, I
- pick a hostname (myhost.oraclass.com)
- switch to static IP (I've scripted it - edits /etc/sysconfig/network-scripts/ifcfg-eth0 and /etc/syscfg/network : hostname) but using the network GUI tool is ok as well
- I choose the static to macth the DHCP address assigned
- inject a single line into the /etc/hosts with the new static address, the hostname, and a hostname that I want to publish
192.168.4.21 myhost.oraclass.com orahost student21.oraclass.com student21
- set a global env variable (/etc/profile.d/oraprofile.sh (export HOSTNAME=myhost.oraclass.com)
and after installing Oracle, I switch back to DHCP. Then if I want to travel, I can easily switch the 'static' address as often as I want (also scripted) to match the IP addr the 'host DHCP' provides.
I've used the NAT. It hands out a DHCP address and usually it works for me (and Oracle) simply by making it static (as above) and letting VMWare container handle it. But every once in a while it seems to 'jam up' and I'd need to fight with it. So I've converted to bridged .. with the help of some scripts I've written.

Installing SAP PI 7.0 SR on Linux with Oracle

Hi all,
We have a requirement where in we have to install SAP PI 7.0 SR2 on LINUX OS with ORACLE as database.
Please help me in providing the below details
1. Hardware Requirements
2. Software Requirements. Please be specific in mentioning the versions of the software.
Do we have any other important points to be kept in mind for starting the installation.
If any one has the same installation previously, please direct me to some blogs which can help me.
Thanks for your help.
Younus
Helpful answers would surely be rewarded.

Hi,
PI Installation Requirements
XI installation
Regards
Seshagiri

Oracle 11g installation on Linux Enterprise 5 remains hanging at 43%!

Hi all,
as per Subject, I have installed a Linux Enterprise 5 OS downloaded by Oracle Download Center and it is now installed following the nice Guide here.
I have added the missing Linux packages and set up the kernel parameters as per Guide quoted above.
If I launch the Oracle installation, it completes the packages and parameters check fine, install goes fine until 43% and then hangs.
It's not freezing as the Installation window shows ongoing animations, if I try to stop installation it responds immediately asking for confirmation.
It just hangs up!
The Linux machine is actually on a VMWare image on a MacOS Leopard host.
I have tried it on my laptop and desktop as well, but the hang point keeps being the same.
Any idea?
Thanks in advance.

Satish Kandi wrote:
Can you post last 10 lines from the installation log? That might provide some clue.Sure.
I will copy more that last 10 lines as last 10 lines do not look too descriptive to me.
This will contain also my Installation abort.
Summary
Global Settings
Source: /mnt/hgfs/Oracle/database/install/../stage/products.xml
Oracle Base: /home/oracle/app/oracle
Oracle Home: /home/oracle/app/oracle/product/11.1.0/db_1 (OraDb11g_home1)
Installation Type: Enterprise Edition
Product Languages
English
Space Requirements
/ Required 3.43GB (includes 224MB temporary) : Available 30.10GB
New Installations (125 products)
Oracle Database 11g 11.1.0.6.0
Enterprise Edition Options 11.1.0.6.0
Oracle Partitioning 11.1.0.6.0
Oracle Spatial 11.1.0.6.0
Oracle OLAP 11.1.0.6.0
Oracle Database 11g 11.1.0.6.0
Oracle Text 11.1.0.6.0
Oracle Net Services 11.1.0.6.0
Oracle Enterprise Manager Console DB 11.1.0.5.0
Oracle Net Listener 11.1.0.6.0
HAS Files for DB 11.1.0.6.0
Oracle Call Interface (OCI) 11.1.0.6.0
Enterprise Manager Agent 10.2.0.3.1
Oracle Programmer 11.1.0.6.0
Oracle Database Gateway for ODBC 11.1.0.6.0
Oracle Advanced Security 11.1.0.6.0
Oracle JVM 11.1.0.6.0
Database Configuration and Upgrade Assistants 11.1.0.6.0
Oracle XML Development Kit 11.1.0.6.0
Generic Connectivity Common Files 11.1.0.6.0
Oracle Multimedia 11.1.0.6.0
Oracle Multimedia Locator 11.1.0.6.0
Oracle Internet Directory Client 11.1.0.6.0
Oracle Database Utilities 11.1.0.6.0
Secure Socket Layer 11.1.0.6.0
PL/SQL 11.1.0.6.0
Oracle Recovery Manager 11.1.0.6.0
Oracle Net 11.1.0.6.0
Assistant Common Files 11.1.0.6.0
Installation Common Files 11.1.0.6.0
Enterprise Manager plugin Common Files 11.1.0.5.0
Oracle LDAP administration 11.1.0.6.0
SQL*Plus 11.1.0.6.0
HAS Common Files 11.1.0.6.0
Oracle Help for the Web 2.0.14.0.0
Oracle UIX 2.2.20.0.0
Precompiler Common Files 11.1.0.6.0
Oracle Clusterware RDBMS Files 11.1.0.6.0
Cluster Verification Utility Common Files 11.1.0.6.0
Oracle Wallet Manager 11.1.0.6.0
Oracle Security Developer Tools 11.1.0.6.0
XML Parser for Java 11.1.0.6.0
Enterprise Manager Minimal Integration 11.1.0.6.0
Oracle Database User Interface 2.2.13.0.0
SQL*Plus Files for Instant Client 11.1.0.6.0
Oracle ODBC Driver 11.1.0.6.0
Required Support Files 11.1.0.6.0
Database SQL Scripts 11.1.0.6.0
OLAP SQL Scripts 11.1.0.6.0
PL/SQL Embedded Gateway 11.1.0.6.0
Oracle Globalization Support 11.1.0.6.0
Character Set Migration Utility 11.1.0.6.0
Oracle Locale Builder 11.1.0.6.0
Secure Socket Layer 11.1.0.6.0
Oracle Java Client 11.1.0.6.0
Oracle JDBC/THIN Interfaces 11.1.0.6.0
Oracle Multimedia Client Option 11.1.0.6.0
Oracle Universal Connection Pool 11.1.0.6.0
Oracle Notification Service 11.1.0.5.0
Oracle Code Editor 1.2.1.0.0I
Oracle Ultra Search Server Rdbms 11.1.0.6.0
Oracle Help For Java 4.2.9.0.0
Oracle Containers for Java 11.1.0.6.0
JAccelerator (COMPANION) 11.1.0.6.0
Database Workspace Manager 11.1.0.6.0
SQLJ Runtime 11.1.0.6.0
Oracle Core Required Support Files 11.1.0.6.0
Platform Required Support Files 11.1.0.6.0
Oracle Ice Browser 5.2.3.6.0
Oracle Application Express 11.1.0.6.0
Oracle SQL Developer 11.1.0.6.0
Oracle JDBC Server Support Package 11.1.0.6.0
regexp 2.1.9.0.0
Enterprise Manager Common Files 10.2.0.3.1
Installation Plugin Files 11.1.0.6.0
Oracle JDBC/OCI Instant Client 11.1.0.6.0
XML Parser for Oracle JVM 11.1.0.6.0
Oracle XML Query 11.1.0.6.0
Oracle Message Gateway Common Files 11.1.0.6.0
Oracle Starter Database 11.1.0.6.0
Sample Schema Data 11.1.0.6.0
Precompiler Required Support Files 11.1.0.6.0
Parser Generator Required Support Files 11.1.0.6.0
Oracle Multimedia Locator RDBMS Files 11.1.0.6.0
Oracle Globalization Support 11.1.0.6.0
Oracle Multimedia Annotator 11.1.0.6.0
Oracle Multimedia Java Advanced Imaging 11.1.0.6.0
Oracle Database 11g Multimedia Files 11.1.0.6.0
Agent Required Support Files 10.2.0.3.1
Oracle 11g Warehouse Builder Server 11.1.0.6.0
Oracle Ultra Search Server 11.1.0.6.0
Oracle Ultra Search Middle-Tier 11.1.0.6.0
Oracle Ultra Search Common Files 11.1.0.6.0
Perl Interpreter 5.8.3.0.4
RDBMS Required Support Files 11.1.0.6.0
Oracle Display Fonts 9.0.2.0.0
RDBMS Required Support Files for Instant Client 11.1.0.6.0
Enterprise Manager Agent Core Files 10.2.0.3.1
Enterprise Manager Common Core Files 10.2.0.3.1
Enterprise Manager Grid Control Core Files 10.2.0.3.1
Enterprise Manager Database Plugin -- Agent Support 11.1.0.5.0
Enterprise Manager Database Plugin -- Management Service Support 11.1.0.5.0
Enterprise Manager Repository Core Files 10.2.0.3.1
Enterprise Manager Database Plugin -- Repository Support 11.1.0.5.0
Provisioning Advisor Framework 10.2.0.3.1
XDK Required Support Files 11.1.0.6.0
Oracle RAC Required Support Files-HAS 11.1.0.6.0
SQL*Plus Required Support Files 11.1.0.6.0
Oracle JFC Extended Windowing Toolkit 4.2.36.0.0
Oracle Extended Windowing Toolkit 3.4.47.0.0
Oracle OLAP API 11.1.0.6.0
Oracle OLAP RDBMS Files 11.1.0.6.0
Oracle Data Mining RDBMS Files 11.1.0.6.0
Oracle Real Application Testing 11.1.0.6.0
Bali Share 1.1.18.0.0
Buildtools Common Files 11.1.0.6.0
Oracle Net Required Support Files 11.1.0.6.0
SSL Required Support Files for InstantClient 11.1.0.6.0
LDAP Required Support Files 11.1.0.6.0
Oracle ODBC Driverfor Instant Client 11.1.0.6.0
Oracle Configuration Manager 10.2.6.0.0
Oracle Universal Installer 11.1.0.6.0
Oracle One-Off Patch Installer 11.1.0.6.0
Installer SDK Component 11.1.0.6.0
Sun JDK 1.5.0.1.1
INFO: Method 'dispose()' Not implemented in class 'OiCcrCsi'
INFO: config-context initialized
INFO: *** Install Page***
INFO: FastCopy : File Version is Compatible
INFO: Install mode is fastcopy mode for component 'oracle.server' with Install type 'EE'.
INFO: Link phase has been specified as needed
INFO: Setup phase has been specified as needed
INFO: HomeSetup JRE files in Scratch :0
INFO: Setting variable 'ROOTSH_LOCATION' to '/home/oracle/app/oracle/product/11.1.0/db_1/root.sh'. Received the value from a code block.
INFO: Setting variable 'ROOTSH_LOCATION' to '/home/oracle/app/oracle/product/11.1.0/db_1/root.sh'. Received the value from a code block.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_exp_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'racfiles.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_dirs.lst'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_filemap.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_EE_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'setperms1.sh'.
INFO: Number of threads for fast copy :1
WARNING: This will stop installation of all products and exit the Installer. Are you sure that you want to stop the installation and exit?
INFO: User Selected: Yes/OK
Thanks :)

Oracle 11g installation for Linux

Hello,
I am new to Oracle and Linux and assigned the task to install Oracle 11g on Linux enterprise edition. How do I install 11g on Linux ? I am also planning to install Oracle Application Express on the Linux machine. How do I accomplish these task? Is there any steps by steps intruction?
Thank you,
Harish

Yes there is. The Oracle documentation site can be found at:
http://tahiti.oracle.com
Go to that link, and select your version (11g Release 1 or Release 2), and then select the "Installation" link.
From there you should find everything you need :)

SAP BI 4.0 Installation on Linux Machines

Similar Messages

Maybe you are looking for