SAP BI 4.1 SP2 Dashboard

Hello Dashboard experts
I want to be able to Drill down from a column stacked chart based on the x-axis catergory. But as the Stacked Chart is in series, I can not seem to insert based on category.
The attached Stacked Chart shows the X-axis categories as NEW1, NEW2, NEW3 and NEW4, I want to be able to click on the whole column and insert the Value NEW1, or NEW2 or NEW3, or NEW 4, such that I can then use this value to carry out filltered rows using anothr component.
See attached

Hi Sara,
Thanks for your prompt reply. I have looked at your solution but my Stacked Bar Chart is mapped out to a pivot table.
Once i have the category ( NEW1, NEW2, NEW3 or NEW4) , I can then either use the listbox or the Combo box components to achieve my drill down.
Any furtther assistance on this would be appreciated

Similar Messages

Migration from SAP BOBJ 3.1 SP2 to SAP BI 4.0

Hi,
Right now, we are on SAP BW 7.0 SP 20 and SAP BOBJ 3.1 SP2 and Crystal Reports 2008.
Our PROD environment has only Crystal Reports that point to SAP BW queries.
We have a future need of extending our BOBJ environment to develop some WebI reports and Explorer dashboards on an Oracle Data Mart.
We want to upgrade our SAP BOBJ 3.1SP 2 to SAP BI 4.0 . Can anyone let us know if SAP BW 7.0 SP20 is a supportable platform for SAP BI 4.0 and Crystal Reports 2011??
Thanks in advance
~Praneeth

Praneeth,
the answer is NO.
BW 7.01 SPS 06+ is the minimum version we support.with BI4.0 SP02.

Questions on Installing SAP BPC NW 7 SP2

Hi Friends,
My company is Installing SAP BPC NW 7 SP2 and I am heading the project starting from 1st June. I have downloaded the Installation guide and still have few questions
1) On which client we deploy BPC server component, I mean on 000 or any other.
2) Initially we are doing on Sandbox, so we are using only one system for both ABAP and NET servers and we are using 64bit machine. How do I run 1.1 Net framework on it, I have read installation guide it says configure to WOW6432 but dont know how to do it
3) When we download the ABAP server component what format will it be .SAR or .CAR or any other
Please do reply.
Thanks in advance
Bobby

Hello Bobby,
1. You will install the BPC server component with SAINT, which has to be executed in client 000, but BPC will actually run in the client you designate for BW.
2. The following article discusses configuring ASP.NET 1.1 to run in 32 bit mode on a 64 bit system [http://support.microsoft.com/kb/894435]
3. The ABAP server component will be a SAR file.
Thank you,
Daniel

SAP BI 4.0 SP2 on Linux and Postgresql Datasource via JDBC drivers

Hi,
I installed SAP BI Platform 4.0 SP2 on Redhat 5.2 and i try to access as a universe datasource a postgresql database (v8.4). But i don't know how to configure the postgresql JDBC driver on linux server.
does anyone have a step by step procedure to configure this JDBC postgresql driver on linux ?
I download this driver : http://jdbc.postgresql.org/download/postgresql-8.4-703.jdbc3.jar
I read the SAP Data Access document for SAP BI 4.0 SP2 about JDBC connexions, they talk about a SBO file located in $ROOT_DIR/sap_bobj/enterprise_xi40/dataAccess/connectionServer/jdbc , but there isn't any SBO file for postgresql database ?
Thanks in advance
JP
Edited by: Jean-Philippe ARNALOT on Oct 6, 2011 6:58 PM

Hi
I found a solution alone, this note 1347514 helps me :
My conf : Redhat 5.2 + SAP BI 4.0 SP2 + postgresql 8.4 datasource + jdbc drivers
My solution :
1) Download JDBC drivers on client side (http://jdbc.postgresql.org/download/postgresql-8.4-703.jdbc3.jar)
2) Create and export a JDBC connexion for postgresql8
3) Create and export a universe using this connexion (test a query in universe design tool tools/Querybuilder)
4) install JDBC drivers on server side, i copied the jar file in this location : $ROOT_DIR/sap_bobj/enterprise_xi40/dataAccess/connectionServer/drivers/java/postgresql-8.4-703.jdbc3.jar
5) Set your classpath in your .profile : CLASSPATH=$CLASSPATH:/export/logiciels/tes-boxi/sap_bobj/enterprise_xi40/dataAccess/connectionServer/drivers/java/postgresql-8.4-703.jdbc3.jar; export CLASSPATH
6) Source your .profile
7) Restart servers (i think restarting only webi server would be ok)
8) Open BI LaunchPad, start Webi and execute a query on postgresql universe
It Works with my configuration
Thanks for your help
JP

Webservice URI of SAP IdM 7.0 SP2

Hi,
I am trying to connect GRC AC CUP to SAP IdM 7.0 SP2, for that i was trying to get the webservice URI for IdM. Where do we get the web service URI of IdM ?
Cheers !!
Zaheer

Hi Zaheer/Sunil
>Once you have done that, you need to create an .ear file
Can you explain how we can create tis ear file?. Is there any guide or documentation which tells these steps?
>I deployed the EAR file generated by VDS (IdentityService.xml) configuration on a SAP WAS server
How we can get this Identity service.xml and how we can generate teh EAR file from VDS? Can you share any guides or documentation
Regards
Sahad

BRFPlus Rules not working in SAP MDG 7.0 sp2

Hi Experts,
I am working on SAP MDG 7.0 Service Pack 2, and am facing issue in validations created in BRFPlus.
I have created Check Function Validations in BRFPlus, to be applied on the Change Request Screen of customer / supplier of SAP MDG.
The validations are active in BRFPlus but do not appear on clicking the check button
Please let me know if anybody has created validations in BRFPlus and if they are working on Change Request UI of SAP MDG 7.0 sp2 ??

Can you post a screenshot of your BRF+ validation function? Check functions of a certain entity will only be called if something in that entity changed. If you don't change anything, the validation funciton of that entity will not be called.
The simplest way to test if a function is being called, is to add a rule that displays a message always (without condition). You should be able to see your message when you click the "Check" button.

SAP 4.1 SP2 - Dashboards Error in Query Browser

Hello Experts,
I am using SAP Business Objects 4.1 SP2. I am getting attached error while trying to access Universe/Bex query through Query Browser. Please see below the exact steps that I am following -
1. Open SAP Dashboards. Select Query Browser option.
2. Select Bex/Universe any one of the option.
3. Select Cube/Universe based on the selected option.
4. It throws below error.
Please note, I have already tried following without any luck -
Redeploying dswsbobje application and restarting TOMCAT.
Increasing APS memory.
Please help.
Regards,
Abhijit

Please make sure all the services required services are running.. mainly see if the DSL bridge service is working fine..
The BICS or Universe selection would not work if DSL service has problem..

Unable to View Dashboard (QWAAS) in IPad(SAP BO 4.1 SP2)

Hi,
I Have published Dashboard with Qwaas Connections in BO 4.1 SP2 Server. But i am unable to see the Data in IPad. Its coming with following Error.

Hi,
can you let us know the following:
version of ipad you are using
SAP BI app ios version 5.1.x?
iOS 7?
this seems to be a BUG identified by SAP. Will be fixed soon, however no target date is specified yet
Regards,
Atul B

SAP BusinessObjects 4.0 sp2 on windows server 2008 r2

Hi SAP,
I'm planing to install SAP businessobjects 4.0. There is some thing not clear related to the version of the Operating system.
In the pam documentation released on July 28, 2011 there is written that :
BusinessObjects Enterprise 4.0 SP2,RTM is available for Windows Server 2008 x64 instead for Windows Server 2008 x64 R2 is available only BusinessObjects Enterprise 4.0 RTM .
If I go to the download center I can found only the following CD:
51041015_1      SBOP BI PLATFORM 4.0 SP02 SERVER WINDOWS (64B) 1 of 4
51041015_2      SBOP BI PLATFORM 4.0 SP02 SERVER WINDOWS (64B) 2 of 4
51041015_3      SBOP BI PLATFORM 4.0 SP02 SERVER WINDOWS (64B) 3 of 4
51041015_4      SBOP BI PLATFORM 4.0 SP02 SERVER WINDOWS (64B) 4 of 4
There is no information related to RTM version.
Is it possible to use Windows Server 2008 x64 r2 for SBOP BI PLATFORM 4.0 SP02 ?
Thank you for your help

Hi Sebastian,
Thank you for your answer. As you can see in the presentation available on
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10ccbdf2-139f-2e10-61a0-d4af67b6257b&overridelayout=true
at page 3 only SAP BusinessObjects Server 4.0 RTM is available for windows server 2008 r2 instead for windows server 2008 r2 there is written explicitly that the versions available are   SAP BusinessObjects Server SP02 and RTM.
Do I understand well?
Has someone already Installed SAP BusinessObjects Server 4.0 sp 02 on windows server 2008 r2?
Thanks in advance for collaboration.
Regards
giovanni

Connecting ORACLE 10G, SAP R/3 to Xcelsius dashboard

Dear All,
I have a scenario with a customer, where in we have to develop an XCelsius dashboard over Oracle 10g source. Customer is keen on building dashboards directly on top of Oracle 10G (or) SAP R/3.
Could you please let me know - which approach is good for Performance of Dash boards?
1)ORACLE 10G>NON SAP Universe>WEBI Report>Live Office> XCelsius
2)Oracle 10GSAP R/3 (Using of Data Services)>ABAP Function Module>Crystal Reports2008>Live Office> XCelsius.
3)Oracle 10G>Crystal Reports2008>Live Office-->XCelsius
Thanks and regards,
Raghu

HI Raghu,
1)ORACLE 10G>NON SAP Universe>WEBI Report>Live Office> XCelsius
Here we can make use of the background scheduling of webi reports and use latest instance if the volume of data is more in the tables.
As webi is a very good tool we can consolidate data and optimise the performence of the dashboard..
Note: Universe designing should be done very carefully.
2))Oracle 10g/SAP R/3 (Using of Data Services)>ABAP Function Module/Infoset>Crystal Reports2008>Live Office> XCelsius.
SAP R/3>function module/Infoset>Crystal repotrs 2008->liveoffice>dashboard.
Here we can make use of the background scheduling of Crystal reports and use latest instance if the volume of data is more in the tables.
it is good if you implement all the logic in ABAP side and simplify the work at Crystal report side so that the dashboard performence is good if the refresh option is ONDEMAND.
Note: ABAP consultant is needed.
3)Oracle 10G>Crystal Reports2008>Live Office-->XCelsius
In this case you have to implement all you logic in Crystal reports and schedule the data and use latest instance for better performence of the dashboard.
Decision has to be made depending on the volume of data logic behind report to display the final data..
if you are using webi in ur flow you can have better staging and adhoc analysis can be given to the user .
Case 2 is also good if ur making every thing at ABAP level .
i dnt suggest 3rd case.
Hope this helps you ..
@sri

Connecting SAP R/3 to Xcelsius dashboard

Hi all,
     I've a requirement where I have some reports in SAP R/3 and based on those reports I need to build a single Xcelsius dashboard. What I know is I have to use Crystal Reports which fetches the data from R/3 tables and in turn use these Crystal reports as data source to my Xcelsius Dashboard and I want this dashboard to be a live one.
But how should I connect to the Crystal reports data directly from Xcelsius ??
Is it through Live Office, if yes can someone describe the process to do it as I'm unaware of it ??
Thanks
John

Hi Anil,
               The reports in SAP are standard reports where each report is having 4000-5000 lines of code, and to replicate
               the same logic in Crystal Reports to build reports which in turn can be used a data soure to Xcelsius dashboard is a
               huge task and time consuming as far as I know from outside of it.......
               Is there any other approach to achieve this ?
Thanks
John

Error while installing SAP NW04s on SLES SP2

My set up is SLES SP2 ( x86_64) and i am trying to install NW04S. In Step 5 Unpack SAP Archivies i am stuck with the below mentioned error. It says permission denied. I changed the permissions of the JDBCCONNECT.JAR and the /sapmnt/SID/exe folder to 777 but it does not solve it. Has somebody come accross this before and got it solved. If so please advise what needs to be done.
syslib::printOSError(const iastring &, int, DWORD, const iastring &, CMessage::eLogMessage) System call failed.
Error 13 (Permission denied) in execution of system call 'lstat' with parameter (/root/sapdump/BS_2005_SR3_SAP_Installation_Master/IM_LINUX_X86_64/COMMON/INSTALL/JDBCCONNECT.JAR), line (535) in file (syuxcpath.cpp).
TRACE 2008-07-20 15:19:21.762 [syuxcpath.cpp:536] CSyPath::getOSNodeType(bool false) lstat(/root/sapdump/BS_2005_SR3_SAP_Installation_Master/IM_LINUX_X86_64/COMMON/INSTALL/JDBCCONNECT.JAR) returned an error I cannot interpret. I will return UNKNOWN.
ERROR 2008-07-20 15:19:21.762 [syuxcfile.cpp:382] CSyFileImpl:: copy(const CSyPath & /usr/sap/LN1/SYS/exe/run/jdbcconnect.jar, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
FSL-02015 Node /root/sapdump/BS_2005_SR3_SAP_Installation_Master/IM_LINUX_X86_64/COMMON/INSTALL/JDBCCONNECT.JAR does not exist.
FCO-00011 The step copyScripts with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Unpack|ind|ind|ind|ind|8|0|copyScripts was executed with status ERROR ( Last error reported by the step :Caught ESyException in Modulecall: ESAPinstException: error text undefined.).
syslib::printOSError(const iastring &, int, DWORD, const iastring &, CMessage::eLogMessage)
FSL-00001 System call failed. Error 13 (Permission denied) in execution of system call 'openU' with parameter (/root/sapdump/BS_2005_SR3_SAP_Installation_Master/IM_LINUX_X86_64/COMMON/INSTALL/JDBCCONNECT.JAR, O_RDONLY), line (368) in file (syuxcfile.cpp).

HI
CHECK THIS LINK
SAP_ERP_6.0_SR3_IDES install error -- permissions error between phase 4&5
DONT INSTALL FROM ROOT

Migrate our SAP EP 6.0 SP2 32 bit to new 64 bit hardware

We are planning to move our SAP EP6.0 sp2 from 32bit to 64bit system on a windows2003 and sql2005.
If any one have any information or where I can get documentation for this migration please let me know.
Thank you.

Yes, you are right. moreover, also make sure have you applied interim patches(psu or cpu) on the base of 10.2.0.5(i.e. patchset 4, i.e. 10.2.0.5) in your source database. If yes, don't forget to apply them on your new installation of 64 bit Oracle software or you will have to use catupgrd.sql(or catcpu.sql, wiich is mentioned on patch release notes)

Integrating Microsoft Visio flow chart with SAP Eportal 6.0 SP2

is it possible to integrate Micrsoft Visio flow chart with SAP eP60 SP2. if yes please tell how to do that...
thanx in advance
cristo

Hi,
Microsoft Exchange Server Integration in EP6.0
The Microsoft Exchange server (subsequently called the Exchange server) is integrated using the Microsoft Exchange server transport. This transport integrates the scheduling capabilities of Exchange Server with SAP Enterprise Portal 6.0. The following versions of Microsoft Exchange server can be integrated with the Enterprise Portal.
·        Exchange Server 5.5 SP4
·        Exchange Server 2000
·        Exchange Server 2003
The transport uses Microsoft Collaborative Data Objects 1.2.1 (subsequently called CDO) to access data from the Exchange server.
Patricio
http://help.sap.com/saphelp_nw04s/helpdata/en/7a/ec015c8446d447a83776d40f31c84f/frameset.htm

SAP BPC 5.1 SP2 Http 500 internal server error - page can not be displayed

When our Sysadmin service account are restricted to the app server and the database server ( as they should be in a secured environment) no client
could reach the web site to even use the Osoft directory . We get a Http 500 internal server error - page can not be displayed . This is for a new multiserver install. Is there a problem on the website security or .net configuration?

Yes the install was done by the SAP install consultant but now we are getting an error when we restrict the Sysadmin ID. Server diagnostics and other tests on Appshell passed as well.

SAP BI 4.1 SP2 Dashboard

Similar Messages

Maybe you are looking for