SAP BI 7.0 to SAP PI to FTP and with Open Hub Destination ...Help!!!!
Dear SCN Experts,
I am currently working on scenario where I have a requirement to push data from SAP BI 7.0 to SAP PI 7.
And I am using Client proxy for SAP BI to send the data from BI tables to SAP PI and then to write to FTP address.
Now the challenge I am facing is the ABAP Proxy how to use it with Process Chain and also I am having Open hub destination created for the same.(Specifically with the new version i.e. 7.0)
Can you atleast make me understand what are the steps involved in this for Client Proxy, Process Chaing, How will proxy trigger and other regarding the same.
I have searched SDN but got the document having older versions in it. Which doesn't serve the purpose.
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com]
Hi Michal,
Thanks for the reply buddy.
I know that we can run the scheduled report for the proxy to fetch the report. But the client requirement is to use process chain, Open hub destination which fetches data from the ODS to Ztable created.
We need to fetch that data from the table via our proxy. I am familiar with that report related method.
I have one document using the same method but is using Infospoke(which is now obsolete) so have to OHD and also some of the proxy of XI's older version. So is not helping me out.
Please do the needful. Or can you send me some sample scenario like this with screen shots. It will be a great help.
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com]
Similar Messages
-
Open Hub Destination - SAP CRM
Hi,
We would like to transfer bulk data from SAP BI (Data Store Object) into SAP CRM. Performance of APD has been very poor. As an alternative, we are checking the feasibility of using InfoSpoke/Open Hub service to transfer data from data store object to ADS (analytical data store i.e. custom table in CRM).
Has any one tried this before?
Can we use remote database (i.e. not SAP BI) in open hub destination?
Any help will be highly appreciated.
Thanks.Hi ,
Yes I have used Info Spoke/Open Hub service to transfer data from my SAP BI to other Sap system.
We have a process chain which has start node and 3 parallel node extracting data from 3 different ODS.
All 3 nodes are connected to a AND node , after then there is a programmer (Unix script) which has does FTP, Abap program can also be used for this.
While doing FTP , give destination address CRM system.
I am sure this will work.
Milan Kothari
9822840385 -
Issue:
I have SAP BW system and SAP HANA System
SAP BW to SAP HANA connecting through a DB Connection (named HANA)
Whenever I created any Open Hub as Destination like DB Table with the help of DB Connection, table will be created at HANA Schema level ( L_F50800_D )
Executed the Open Hub service without checking DELETING Data from table option
Data loaded with 16 Records from BW to HANA same
Second time again executed from BW to HANA now 32 records came ( it is going to append )
Executed the Open Hub service with checking DELETING Data from table option
Now am getting short Dump DBIF_RSQL_TABLE_KNOWN getting
If checking in SAP BW system tio SAP BW system it is working fine ..
will this option supports through DB Connection or not ?
Please follow the attachemnet along with this discussion and help me to resolve how ?
From
Santhosh KumarHi Ramanjaneyulu ,
First of all thanks for the reply ,
Here the issue is At OH level ( Definition Level - DESTINATION TAB and FIELD DEFINITION )
in that there is check box i have selected already that is what my issue even though selected also
not performing the deletion from target level .
SAP BW - to SAP HANA via DBC connection
1. first time from BW suppose 16 records - Dtp Executed -loaded up to HANA - 16 same
2. second time again executed from BW - now hana side appaended means 16+16 = 32
3. so that i used to select the check box at OH level like Deleting data from table
4. Now excuted the DTP it throws an Short Dump - DBIF_RSQL_TABLE_KNOWN
Now please tell me how to resolve this ? will this option is applicable for HANA mean to say like , deleting data from table option ...
Thanks
Santhosh Kumar -
Backup message error -SAP system is running or SAP user is connected to dat
Hello ..
when the backup started i got this message error ..before starting the backup, the shell shutdown the sap system but below message was showed
BR0262I Enter database user name[/password]:
BR0055I Start of database backup: bedvugxg.aff 2010-08-08 05.31.48
BR0484I BRBACKUP log file: /oracle/AAA/sapbackup/bedvugxg.aff
BR0477I Oracle pfile /oracle/AAA/102_64/dbs/initAAA.ora created from spfile /oracle/AAA/102_64/dbs/spfileAAA.ora
BR0068E SAP system is running or SAP user is connected to database AAA - database cannot be shut down
BR1025I Please shut down SAP system first or use the 'offline_force' option
BR0056I End of database backup: bedvugxg.aff 2010-08-08 05.31.48
BR0280I BRBACKUP time stamp: 2010-08-08 05.31.49
BR0054I BRBACKUP terminated with errors
[Major] From: "OMNISAP" Time: 08/08/10 05:31:49
BRBACKUP /usr/sap/AAA/SYS/exe/run/brbackup -t offline -d util_file -c -m all -u hpbkup/******* returned 3
i am new on this, what should i review into the db?
Regards and thanks in advance
Dma.Hello Daniela,
you try to perform an offline backup (which is a very uncommon way nowadays) and your SAP system is not down.
This is also described in the official documentation:
http://help.sap.com/saphelp_sm32/helpdata/en/0d/d309664a0c11d182b80000e829fbfe/content.htm
offline: Database backup in offline mode, in other words, the database is shut down during backup. When you select this parameter, BRBACKUP checks that no SAP system users are connected to the database. If an SAP System is active, the database is not shut down and BRBACKUP terminates the process with an error message (message number BR0068E).
Regards
Stefan -
Upgrade from SAP Webas 6.40 to SAP Netweaver 2004s
Do we have to change the virtual host name used for high availability clustering environment to local host name before we conduct the upgrade from SAP WebAS 6.40 to SAP NetWeaver 2004's ?
Do we have to change the virtual host name used for high availability clustering environment to local host name before we conduct the upgrade from SAP WebAS 6.40 to SAP NetWeaver 2004's ?
-
Standard SAP Report for Vendors to dispaly Vendor No, Name and Balance
Hi Experts,
Can any one help me to display Vendor Report which contains Vendor No, Vendor Name and Vendor Balance from SAP Standard Reports (Not Customized Report). I have checked with all SAP Standard Reports, It seems that all SAP Standard Reports displays with only Vendor No not with Vendor Name.
Best Regards,
ChandraHi,
You can use the following report, actually it is a drill down report. You can drill down the report in the way you want.
S_ALR_87012079
Rgds
Murali. N -
Follow up activities after SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4
Dear Friends
We have completed SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4.
We refereed the upgrade guide for follow activities and we required confirmation before performing the activities.
Could you please help us what needs to be done immediately after upgrade.
Regards,
BharathiDear Nils,
Thanks for the support.
Yes, we are following the same document 'CUUC46C_to_NW701SP07' for unicode conversion after the upgrade from the note 928729.
Please suggest us in that document which are the steps should be carried out after ECC6.0 EHP4 upgrade,
1. Preparation
2. Unicode Preconversion Phase in SAP Basis 4.6C
3. Upgrade Process
4. Unicode Conversion Phase
5. Unicode Conversion Completion Phase
6. SAP Notes
Regards,
Bharathi -
New Functionalities on SAP FI side in SAP ERP 6.0 EHP4 & SAP ERP 6.0 EHP5
Hello Team
I am a FI consulant and now i would like to know the functionalities avialable in SAP ERP 6.0 EHP4 and SAP ERP 6.0 EHP5. So i request you to pleasae check and provide me answers to the below points for my understanding
1. What are the new functionalities added in SAP ERP 6.0 EHP4 on SAP FI side.
2. What are the new functionalities added in SAP ERP 6.0 EHP5 on SAP FI side.Finally what is difference between EHP4 and EHP5, i mean in the point of SAP FI functioanliy.
In the meantime, please provide me the links where i can get complete information on the new functionalities added on FI side in these Enhancement Packages (ie 4/5).
Yours answers would help me a lot to understand the concept.
Regards
SreeEnhancements packages contains tens to hunderds of new or changed functionalites (called business functions). After installing an enhancement package you can activate the business functions which can be usefull to you.
To have an idea which business function can be usefull, you can use the business function prediction. Based on the (FI) transactions you use in the system, it gives an advice which business functions in an enhancement package should be activated.
See http://www.sap.com/solutions/business-suite/erp/enhancement_packages/business-function-prediction.epx
and http://service.sap.com/erp-ehp -
Error while installing the SAP J2EE add-on for SAP NW XI installation
Error while installing the SAP J2EE add-on for SAP NW XI installation
Posted: Jan 24, 2007 5:23 PM Reply E-mail this post
Hello,
When I am installing the SAP SAP J2EE add-on for SAP NW XI installation I am getting the follwing error:
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: Executable /oracle/XID/920_64/bin/sqlplus returns 127.. SOLUTION: See ora_sql_results.log and the Oracle documentation for details
Could some one help me to resolve this error and install the SAP J2EE add-on?
Thanks,
GeorgeHi George,
Kindly use the latest installation Masted in Service market place. That will possibly solve your problem.
Regards
Vivek -
Error while uploading Transport request from SAP ECC6.0 EHP4 to SAP ECC 5.0
Hi friends,
Error while uploading transport request to the transport directory,
we downloaded the transport request from one sap system which have a set of developments(contains screen programs)
for example downloaded all co files and data files
control file: K900470.SAD and Data file: R900470.SAP from transport directory.
we are trying to upload the transport to another Sap system
we have
Uploaded the controlling file K900470.sad to the location /usr/sap/transpad/cofiles/
Uploaded the controlling file R900470.sad to the location /usr/sap/transpad/data/
we tried to add in the import queues using TCODE: STMS and trying to import.
During import we get the below error:
HALT: unknown dynpro format: d021s_length() returned 0 Please contact the SAP support.
End with rc : 16
Please help me on this
We are trying to copy from ECC 6.0 EHP4 to SAP 5.0 and SAP 4.7EE
Thanks & Regards
Murali PapanaDid you see that you tried to transport to an older release!! You should have expected such a result.
Before doing such a thing, you should have looked at SAP notes to see SAP recommendations, if any. And you're lucky, there are ones: [Note 1090842 - Composite note: Transport across several releases|http://service.sap.com/sap/support/notes/1090842]. You need to know that ECC6 corresponds to SAP Basis 7.0, and ECC5 corresponds to SAP Basis 6.40. -
I have error while testing the system created from a sap business objects template in SAP portal
I have error while testing the system created from a sap business objects template in SAP portal. Error text:
com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not create JCO connection. 'mshost' missing
I configure integration SAP portal and SAP BW system. All system requirements are complied.
Environment
SAP Business Objects 4.0
SAP BW 7.31
1. I configure SSSO between SAP BW and SAP Business Objects Enterprise 4.0
2. Next I setting integration SAP PORTAL with SAP BW system
3. I download certificate from portal. Select Certificates and key (http://sapserver:port/nwa) – See scren_
4. In next window selected Ticketkeystore and Saplogonticketpair-cert( near part window form)
5. Select Export entry button and binary format file certificate for download. Press download.
6. Save certificate file in local PC folder
In next step need export certificate file to SAP system. Sequence of step:
1. Run STRUSTSS02 transaction .
2. Chose certificate ->import.
3. Select downloaded certificate file
4. Select Add to certificate list button and Add to ACL button
5. Inter System ID and Client(000)
6. In next I download iview sap business objects template into sap portal: System administration->transport->Import. And select and download sap business Objects iview template in .epa format into sap portal.
7. Result – downloaded iview.
8. In next step I create system from template. System administration->system landscape.
9. In next step I input parameters for my system in Connector category, Sap business objects and user management categories: See screen _2
10. When I created the system and test the connection error occurred: See screen_3
This issue is important enough. I would be grateful for opinions and ideas. Thanks in advance.Did you find a solution?
-
How to upload data into SAP BW Info Objects using SAP XI
Hi,
I need to upload master and hierarchy data into SAP BW Info Objects using SAP XI as EAI.
Can anyone suggest me the best solution to do it.
Thanks in Advance,
Volker.Hi! Have you not checked the BW-XI Integration document? It is available on the main page of the SDN section for XI. Almost all the steps for the integration are there...
-
SAP Crystal Reports connection to SAP R/3
Hello Everybody,
I install SAP BO Enterprise Edition XI 3.1
SBOP Rich Client Tools XI 3.1
SBOP Integration Tool Kit XI 3.1
Java Connector
Crystal Reports 2011
I configured all the integration and it works fine, i can log on the Infoview with SAP ID.
I work with SAP R/3 4.6C
The problem is when i connect to the R/3, Crystal show me the system that i have in the saplogon.ini, and then i used a user that i have to test, whenn i tried to logon, an error occurs...
Logon failed.
Details: You do not have the necessary rights to design reports against the SAP system. Please check with your system administrator.
And when i used the user sap*
Logon failed.
Details: Name or password is incorrect. Please re-enter.
So... what do i need to pass that rights to my user??? or do i need to do some kind of customizing in the SAP R/3 system???
Thanks!
Edited by: Erick Fernando Nicolas Fernandez on Aug 10, 2011 3:55 AMThere is a specific set of authorizations that you need to provide to your SAP user to be able to create CR reports against SAP data source. Check in the "SAP BusinessObjects Enterprise Integration for SAP Solutions Installation and Administration Guide" chapter 13 called "Authorization".
You can download this guide in the following URL: ht[http://service.sap.com/sapidb/011000358700000559912010E/xi31_sp3_bip_sap_inst_en.pdf|http://service.sap.com/sapidb/011000358700000559912010E/xi31_sp3_bip_sap_inst_en.pdf]
More product guides on ht[http://help.sap.com/businessobject/product_guides/|http://help.sap.com/businessobject/product_guides/]
Hopefully it helps.
Filipe Hartmann -
SAP BI u2013 PI u2013 SAP R/3?
Hi,
Can anyone tell is this requirement is posiible because how we can send alerts to users after data loads with status becasue we can send alerts if any critical suitation occurs right?
How we can push data without manual.
1). SAP BI u2013 PI u2013 SAP R/3? I.e.; Delta generated in R/3 should pop into BI through PI directly without manual push/pull.
2).PI system for monitoring data loads and sends alerts to user (by e-mail) after data loads with status?
please help me out.HI Raju,
To answer your question 1:
1). SAP BI u2013 PI u2013 SAP R/3? I.e.; Delta generated in R/3 should pop into BI through PI directly without manual push/pull.
It should be possible if you have the idocs avaialble in R/3 and BI systems for handling the data.
for question 2:
2).PI system for monitoring data loads and sends alerts to user (by e-mail) after data loads with status?
PI will send alerts for any failures within the PI system only.
Any failures outside the purview of PI will not trigger alerts and have to be handled by the system in which the errors occur.
Regards,
Ravi Kanth Talagana -
Data Import from SAP R/3 to SAP MDM 7.1 without SAP PI
Hi All,
I have a requirement to import Vendor Master data from SAP R/3 to SAP MDM 7.1 on a regular basis. What are the Options available for data transfer between these two systems without any middleware(like SAP PI,etc). I checked the SAP Documentation and found the scenarios with SAP PI as middleware.
I have few very basic ideas:
1) Will there be any way for SAP MDM to pick a file from certain location and load the data..
2) Shall I use MDM ABAP API to write a program to connect to MDM Repository and schedule this at regular intervals to achieve the data transfer.
Pls suggest the best design approach..
Thanks in advance.1) Will there be any way for SAP MDM to pick a file from certain location and load the data..
ANS : No, MDM will not pick up the file, file can be pick up from MDM Inbound folder and send from outbound folder for automize process and for MDM manual Process you can pick up and send file to local desktop, network shared path
2) Shall I use MDM ABAP API to write a program to connect to MDM Repository and schedule this at regular intervals to achieve the data transfer.
ANS : require to write code at ABAP side
so ABAP program will pick or send data file to MDM folder
Note following point
1. Require to write ABAP Program which will pick or send data file to MDM outbound / Inbound folder
2. Require to do some technical setting for ABAP program at SAP side, technical person will help regarding this matter
Note : There are many disadvantage and time consuming procss, monitoring file and it is not advisable to go without any intermidiate software for e.g PI, Tibco
Thanks,
Jignesh Patel
Maybe you are looking for
-
How do I re-download Acrobat pro XI when Creative Cloud app thinks it's still installed?
I've been having no end of grief with Creative Cloud on my late 2009 2.8 GHz Intel Core i7 iMac, running OS X 10.9.2. It slows my finder redraw down so that sometimes it takes 5 minutes to display the contents of a folder in the finder. So a couple o
-
Problem with adding a second Categories field to my Enterprise Wiki Page template
I wanted to add a second category field beside the default wiki category. So I did the following steps:- Inside my enterprise wiki site collection, I added a new Site Column, named "customer" with a managed metadata type. Then I added the site column
-
PSE 8.0 (Mac) Trial Version, no selection for Slideshow.
I select photos in Bridge then click on Create, there appears to be selections for Web Photo Gallery and for PDF Slideshow but no selection for plain ordinary Slideshow. Did Adobe eliminate the plain jane Slideshow from this version? Regards, Bob
-
my facetime wont turn on in my settings for iphone 4......also itunes wont download new update 4.3.2.....plz help
-
Hi to All. I am facing a issue sender comm channel? comm channel is picking the file before placing the file in the source dir, the file size is some times coming morethan 6MB. Could you please help me on this? Thanks in advance.