SAP BI BEx Analyser Info - Required

Hello Gurus,
I have to prepare end user training Material onSAP BI BEx Analyser for : "End - User" and "Adminstrator" for my company.
Could plz provide me some end user sample material which i can use.
or could you please let me know how to go about it.
Thanks and Kind regards,
Gade.

Hi,
I want to bring into your notic that 0numday and 0numwday are the attributes of 0calmonth so there might be a chance that these attributes are noit maintained in 0calmonth.
If possible make a new calmonth using refernce as 0calmonth and in that new calmonth maintain attributes 0numday and 0numwday.
You have to select the check box with master data in infoobject to add attributes.
Once done with all the steps then use this new calmonth in you bex query designer and that attribute value will be avaialable.
Hope it helps.
Regards,
AL
Edited by: AL1112 on May 25, 2011 1:22 PM

Similar Messages

Need help on SAP netweaver Bex Analyser Release 2004s,patch 700.

Hi BW Buddies,
Hope everyone is fine.
I just installed the SAP netweaver Bex Analyser Release 2004s,patch 700.
The look and feel of this BEx is different from that of BW 3.5 Bex.
Can anybody suggest me some good documentation about the new Bex Analyser?
Any kinda reply for this is appreciated.
Thanks in Advance
Sam Mathew

Check this link:
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/ba95531a-0e01-0010-5e9b-891fc040a66c [original link is broken]
KJ!!!

SAP BEx Analyser on MAC OS or WAD

Dear all,
Can we use BEx analyser, Query Designer or WAD on MAC OS. Any other alternative ?

Hi,
There is still no version for MAC OS. The BEx addon as we know it is built for MS Office and uses the .NET framework. No alternative for MAC OS has been developed yet.
Regards,
Michael

IP - Various problems with BEX Analyser - help would be nice

Hi,
we use IP in combination with BEX analyser. We experience certain problems. Does anyone experienced the same issues mentioned below:
1) if a planning function is executed, it is executed twice when your cursor is within the query itself. If it is outside the query when clicking on the button, it is executed once (like it should).
2) Locking: we don't have locking problems, but from the moment two people lock each other once, they need to close their analyser and re-open it (so logon again) in order to be able to start planning again in a non-locked part. If they just change their selection (to the not-lock part) they remain locked!!!
3) planning function with multiple variables: system cannot retrieve values of all variables.
details of function:
CMD                                               1       EXECUTE_PLANNING_FUNCTION
PLANNING FUNCTION NAME           1      AG10_COPY01
DATA PROVIDER_FILTER                 1     DATA_PROVIDER_1
VAR_NAME                                     1       PROF_CTR
VAR_VALUE                                    1       510
VAR_NAME                                     2     PERIOD
VAR_VALUE                                    2        012
VAR_NAME                                     3       CUSTOMER
VAR_VALUE                                    3     1000
-> following the instruction of the SAP course, in case of multiplle variables they should start from 0 and have an incremental increase. But the system only recognizes the variable with index = 1
regards
D

Dear Dries,
could it be that the variable type you use require a different set of commands?
In general the parameters of the BEx Analyzer follow the rules of the SAp BW 3.5 Webruntime. When reading this detailed documentation you find that depending on the type of variable other names have to be used, e.g. when using a selection option variable you need something line varname_low, varname_high, ...
The documentation can be found in the online-help:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/07/ff413a3ace7022e10000000a11402f/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/07/ff413a3ace7022e10000000a11402f/content.htm</a>
Best regards, Olaf Fischer

How to convert Bex Analyser report into normal MS Excel sheet

Hi,
I created query in Bex Analyser. Now, I want to send this copy as a normal MS Excel document through mail.
When I tried save as and send a copy, It is showing the filter,table, information buttons and appearing same as bex report. I would like to see normal excel sheet when it opens.
Is there any way except copy & paste.
Any help would be appreciated.
Thanks,
Aparna.

Hi Chandu,
I followed same procedure as you said. I created one node for SMTP in SAP connect:Administration(SCOT).
I gave destination as RFC destination -> BWDCLNT -> Internet -> enter mail address...etc as per system requirements.
Once I executed, It is showing "No message sent". Did I miss any steps to follow...
Can you give me step by step procedure to follow.
In our Bex tools, Only Broadcaster was disabled. If I configure mail server, may be it enable?
Your help would be appreciated.
Thanks,
Aparna.

Drill down is giving an error in Bex analyser.

hi friends, when iam using the bex analyser, the repoort will open in a short time. And all the free characteristics are works fine.
But one of the free char(company code) is not able to giving the drill down, insted it is getting the following error.
*An error occured in the communication with the bw server, due to this, the connection had to be closed.*
*Detailed des:- No more storage space available for extending an internal table.*
could u help me what iam missing and how to solve this problem.
and how it is related when we r drill down with one particular char how does this is related to table space, other free char are working fine with drill down.
pls guide me...
thanks in advance.
sruthi.

hi , i check the error dump in st22 and the error analysis is as below..
any help based on below information....
Short text
    No more storage space available for extending an internal table.
What happened?
    You attempted to extend an internal table, but the required space was not available.
How to correct the error
    The amount of storage space (in bytes) filled at termination time was
    Roll area...................... 2718352
    Extended memory (EM)........... 2003038144
    Assigned memory (HEAP)......... 2000756480
    Short area..................... " "
    Paging area.................... 16384
    Maximum address space.......... 4294967295
    If the error occures in a non-modified SAP program, you may be able t
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the followin
    keywords:
    "TSV_TNEW_PAGE_ALLOC_FAILED" " "
    "CL_RSR_NET_GRID===============CP" or "CL_RSR_NET_GRID===============
    "APPEND_DATA_CELL"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".

What is the actual version of BEx Analyser

Hello everybody!
I have big problems with my local installed BEx Analyser. I have Relase 2004s, Support Package 0, Revision 461. Where can I download a up-to-date version?
Regards, Thomas

Hi,
If you are working on any project just contact your Basis Consultant for this.You will be getting all support packs and the required configurations in service.sap.com.
Basis people will be very well aware of this.
Regards
Karthik

What is difference between bex analyser and bex browser

what is difference between bex analyser and bex browser . please explain what are use of both and what we do in both.

hi
Bex Browser
The Business Explorer Browser (BEx Browser) makes it possible for you to access all document types of the Business Information Warehouse that are assigned to your role or that you have stored in your favorites. You can select and open documents assigned to you in the BEx Browser or store and manage new documents in the BEx Browser.
Document types that you can work with in the BEx Browser are:
· BW workbooks
· Documents that are stored in the Business Document Service (BDS)
· Links (references to file system, shortcuts)
· Links to internet sites (URLs)
· SAP transaction calls.
· Web applications and Web templates
· Crystal Reports
Bex Analyser
The Business Explorer Analyzer (BEx Analyzer) is the analysis and reporting tool of the Business Explorer that is embedded in Microsoft Excel.
Features
You can call up the BEx Query Designer in the BEx Analyzer, in order to define queries. Subsequently, you can analyze the selected InfoProvider data by navigation to the query created in the Query Designer and create different query views of the data. You can add the different query views for a query or for different queries to a work book and save them there. You can save the workbook in your favorites or in your role on the BW Server. You can also save the workbook locally on your computer.
Beyond that, you can precalculate the workbook and distribute it by e-mail to recipeients or you can export it to the Enterprise Portal and make it accessible to other employees in the company.
You can start queries in a standard view (with a Standard Web Template set up in Customizing) in the Web browser and forward the URL or continue to navigate on the Web. Similarly, you can export the Web query to MS Excel 2000.
Overview of the Functional Area of the BEx Analyzer:
·        BEx toolbar
You access the functions of the BEx Analyzer from the BEx toolbar, which takes you to the BEx Open dialog box where you can open existing queries, or to the BEx Query Designer where you can create new queries or change existing queries.
·        Evaluating Query Data
The BEx Analyzer offers convenient functions for evaluating and presenting InfoProvider data interactively. In the BEx Analyzer, you can add queries to workbooks, navigate within them and refresh the data. You can also process the queries further in Microsoft Excel or display them in the Web browser in a default view.
Navigation of a query allows you, for example, to filter characteristics on a single value, drilldown on all values for a characteristic, regroup characteristics and key figures in the rows and columns of the results area, or hide key figures. Navigation results in different views of the InfoProvider data. In addition, a range of further functions is available which allow you to edit a query interactively (for example, sorting, cumulated output, among others). In addition, you can use the editing functions in Microsoft Excel in order to set up individual format templates, to print results areas, or to create graphics.
·        Queries in Workbooks
Queries are inserted into workbooks so you can display them. When you insert a query, a link is made between the cell areas of the worksheet and the data of the InfoProvider upon which the query is based. A link therefore exists between the Business Explorer and the Business Information Warehouse Server (BW Server).
When inserting a query into the workbook, a VBA routine is automatically generated in the workbook. You can also connect the Business Explorer with your own VBA programs (Visual Basic for Applications).
You can create workbook templates, into which you can insert your queries. Workbook templates can contain pre-determined items for the area of the query, formatting settings, logos, VBA macros, and so on.
·        Precalculating workbooks
You can precalculate and distribute workbooks with the BEx Broadcaster, which is a Web application you get to form the BEx toolbar. The system generates MS Excel workbooks with historical data. You determine the time for precalculation yourself: You can have workbooks precalculated at a predefined time or they can be precalculated whenever data in the underlying InfoProvider changes. You can have the precalculated workbooks sent by e-mail or you can export them into the Enterprise Portal, where you can make them available to employees within your company.
Activities
To start the BEx Analyzer, choose Start ® Programs ® SAP Front-end Business Information Warehouse ® SAP Business Explorer Analyzer.
You can also access the BEx Analyzer via SAP Easy Access ® SAP Business Information Warehouse ® SAP Menu ® Business Explorer ® Analyzer or in the Business Explorer Browser using the Business Explorer Analyzer symbol in the menu bar.
Hope this will solve your issu
nagarjuna

The length of the password entry field in the BEx Analyser

Hi,
The password is 8 characters in the BW system.
When users changing their newly assigned passwords. When logging into the BEx Analyser, and prompted to change the password, a password entry box is displayed, with an entry field longer then 8 characters. Some users are therefore entering passwords longer then 8 characters. This is fine when they first login, but when they try come back to the system, their logon fails.
Can something be done to restrict the length of the password entry field in the BEx Analyser?
Many Thanks
Jonathan

Hi Jonathan
we are having the same problem - did you find a way to resolve this? I did not find any SAP notes referring to the issue.
Regards
Hayley

BI-IP - Bex Analyser - select excel single row and aplly planning function

Hi experts,
In BI-IP (BW 7) with Bex Analyser, is it possible to select a single excel row (or a range of rows) and then apply a planning function? I know that in WAD it's possible with the binding option to select a single web item.
The purpose is to apply a revaluation factor to selected (by the user) cost elements rows in the workbook.
Thanks and regards,
MA

Hi
It is possibel in WAD to select one or many rows while executing Functions such as--Reposting; Revaluation etc.
However, you should be in a position to select the rows based on....unique identifier such as Require ID; Request #; Serial #; ....this is more so in case of multiple entries for the same cost element for different combinations.
Regards
Srinivas

SAP BW Bex 7.3 Queries not working with Enterprise Portal (EP) 7.3 ABAP stack only

SAP BW Bex 7.3 Queries not working with Enterprise Portal (EP) 7.3 ABAP Stack
Dear Portal Gurus,
we want to integrate SAP BW Bex Queries 7.3 into an Enterprise Portal 7.3 EP ABAP Stack only installation.
1) We have Done SSO between EP And BI System
2) System Object is Created
3) When we trying to create Iview of BEX 7.3 report, its executing that report on BI server, we don't have java stack on BI System
4) We have updated the required table in Bi system for executing the report on EP
5) RFC is OK, System Object Test is OK, Report is working independently from Business Explorer, but not working from EP
There no irj services available on BI system, as it is only ABAP stack.
Can anybody help us in achieving our requirement
Thanks in advance
Michael Wecker

Hi Michael,
To integrate portal with BI you need to perform BI Portal integration steps.
Refer to a document link below for guidance purpose.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a?overridelayout=t…
Ensure that you have performed all these relevant steps.
Hope this helps.
Regards,
Deepak Kori

How Many SAP BW BEx Queries can be embedded in a Universe

Hi,
I need to create 5 reports based on five different SAP BW BEx Queries. These are charts with 3- axes i.e. X,Y,Z.
The example requirement is to create Line charts (Vertical Mixed Line Charts) and deatils are as follows: The chart should show CPU Utilization % for different servers (eg. Servers1,2,3,4,5) for each day in a particular month.
Axes details:
X- Axis - Date eg: 01 /09/2010 to 30/09/2010
Y-Axis - CPU Utilisation Percent
Z-Axis - Servers from 1 to 5
The above detailed chart comes from a BEx Query . In this way there are four more BEx queries which should give four other charts.
My query is: Is this possible to have five different BEx queries in a single Universe and Create 5 different charts(one chart from each BEx Query) in a single tab as in the current manual report.
(All the five Line charts should be downloadable to a single sheet in Excel)
One more, should I use Web intelligence only? Is any other tool that helps for this requirement.
Please advise.
Nanda Kishore.
Edited by: Nanda Kishore B on Oct 13, 2010 4:17 PM

Answers for your qns:
Is this possible to have five different BEx queries in a single Universe ?? NO
Create 5 different charts(one chart from each BEx Query) in a single tab as in the current manual report. ?? YES
All the five Line charts should be downloadable to a single sheet in Excel ?? Possible- YES
should I use Web intelligence only? *WebI * or Data Federator
Nanda Kishore,
As you are in SAP BI, I suggest you to go with BO Universe==>>WebI or DataFederator.
Solution for your problem:
Sol1 : Why you are creating 5 BEx queries?? Is there any calculations or restrictions??
YES, then Design 5 Universes for each BEx query.
@ WebI Report: Develop report/chart based on Universe-1 and in BO query panel click on Add Query and do it for 4 other Universes.
Save all Charts in single report. (After running second time query, it will prompt for 3 opt's: 1. Insert new report 2. Insert data with in the existing report 3. Indulge objects without creating new report )
Here, go with Opt:2 or Opt3 or opt:1, no problem. And develop all Charts in single report by just dragging & dropping chart type and objects to it.
Now your problem solved.
Sol2: If no need of 5 BEx queries: Just drag all the Characteristics, Keyfigures and other what you want for Charting.
@Designer: Design Universe on top of this BEx master query.
@ Report : use this Universe and drag objects to 5 diff charts.
Hope you got it.
Thank You!!
Sent from iPhone

Binding variables to a button in BEx Analyser

Hi,
I have built a planning application in BEx Analyser but I am having an issue with planning sequences I have attached to a button.
I have attached a planning sequence to a Save button, carried out the steps of choosing planning sequence radio button, the appropriate data provider, attaching the planning sequence etc and then I attached a save to that same button as well. So when I run the application now it tells me the planning sequence ran with no issues and the data was saved. But I get an error message also saying: Parameter VAR_VALUE_LOW(_EXT)_2 is missing for variable ZINGRNG1
The data gets saved but the planning sequence doesnt actually execute despite it saying so. I know it is not an issue with the planning sequence as I have the same planning application built in BEx Web Application Designer.
To explain further I have 2 dropdowns boxes with must be selected before the the data becomes input ready and it as if when I save it doesnt recognise these variables or something.
Can any shed some light on this issue. Need to resolve it if at all possible for a presentation I am doing.
Thanks,
Elle

Hello,
Perhaps you can find the answer in these resources:
1) note 1121654
2) https://wiki.sdn.sap.com/wiki/display/BI/BI-IP%20Passing%20Variable%20Values%20to%20Planning%20Functions%20from%20BEx%20Analyzer
or at this "How To.."-Paper.
3) https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be&overridelayout=true
Regards,
Michael

Button in Bex Analyser 7.0 - problem with setting up Static Parameters

Hello,
I know a similar problem has been discussed here already, but I am still having problems with setting up Static Parameters of my Button in BEx Analyser 7.0, so that I can pass Variable values from that button to my query.
This is what I do - in Static Parameters of my Button I set the following values:
Name                          Index          Value
DATA_PROVIDER        0               DP_1
CMD                             0               PROCESS_VARIABLES
SUBCMD                      0               VAR_SUBMIT
VAR_NAME                 0               0RMA_FIP
VAR_VALUE               0               004/2010
As a result, I would like the value 004/2010 to be passed to variable 0RMA_FIP (which is mandatory) and the query to be executed with that value. For some reason, however, the value is not passed correctly, and instead the variable is filled with a blank or not filled at all, and I am getting a message "Specifiy value for variable Fiscal year/period". What do I do wrong?
Just to give you a broader picture - I would like to later use this logic to pass more than one variables into a query, including a hierarchy node, and read the values from an Excel worksheet - however, after many attempts to do so, I started playing with just one variable to figure out what the problem was.
I have already seen the following two threads and SAP notes on passing variable values from the button:
Re: Button in BEx Analyzer 7.0
Re: How to set variables values via VBA.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be?quicklink=index&overridelayout=true
Can anyone please advise?
Cheers,
AL

I managed to figure it out myself!
Instead of VAR_VALUE I need to enter VAR_VALUE_EXT, and it works fine.
I will mark this thread as "answered".

HOW TO DO VARIABLE IN BEX ANALYSER IN BI-7 GIVE SCREENSHOTS DETAIL

HOW TO DO VARIABLE IN BEX ANALYSER IN BI-7 GIVE SCREENSHOTS DETAIL

Hi
I hope these links helps you,
Defining Variables:[http://help.sap.com/saphelp_nw70/helpdata/EN/ac/789b3c4d4d8d15e10000000a114084/content.htm]

SAP BI BEx Analyser Info - Required

Similar Messages

Maybe you are looking for