Sap BI ( for Business One ) 4.0 Run time Error

Hi
we had successfully installed BI client 4.0 trial version . when we any crystal report in B'One its shows an error Prompt. Before installing the BI.4.0, all the crystal reports were working fine, pls find the attachment of Error and suggest the possible solution.

Hi Shahan,
Please check below links.
Error while previewing Crystal Reports in SAP B1
problem with Crystal Reports in SAP b1 8.81 environment
SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads
Preview error in Crystal Report.
Hope this help
Regards::::
Atul Chakraborty

Similar Messages

  • SAP lumira for business one?

    I am using a non HANA setup for SAP business, does SAP offer a license for Business One customers?

    hi jonathan
              sap launch new product SAP Lumira, Edge edition for small and medium business thisproduct also known as sap lumira server for team. this will not require any HANA connection.
    please check http://scn.sap.com/community/lumira/blog/2015/01/19/its-here-sap-lumira-team-server-edge-edition above link.
    this may help you.

  • SAP Gui 6.40 BeX Analyser problem (Run Time Error)

    Dear All
    Really need some help
    We get the following error in EXCEL 2003 when running transaction rrmx from SAP easy access:
    Run time error 91 Object variable or with block variable not set
    When debugging we get the following error message:
    call pAddin.SetConnectionFromHandle(p_connectionObj).
    We've rolled out the same package globally to all our users, some machines have this problem and some don't - which has been making this very difficult to resolve and troubleshoot.
    We've tried patch level 29 of the GUI and this did not resolve.
    I've read lots of threads relating to the .net framework and made sure all the service packs are installed, and also tried .net framework 2.0 and 3.0 - the problem still existed with both.
    I'm really stuck and appreciate any guidance.
    If we manually launch Analyzer (SAP BW 3.x) from the start menu, EXCEL and the BW add-in works fine... we only get the run time error when using transaction rrmx from SAP GUI.
    Please help!
    Thanks.

    OK, so I've done the following - which DID work and i no longer get the RUN TIME error:
    -uninstalled SAPGUI
    -uninstalled Office 2003
    -uninstalled all .net framework versions + updates.
    -install .net framework 2.0 with SP1
    -install microsoft office 2003 + SP3
    install sap gui 6.40 + patch level 29
    However, if anyone out there has got an easier and quicker solution to this problem I'd REALLY appreciate it. I have got lots of our users with this problem and it took a long time to complete all the steps above.. there must be something easier to do to fix this...
    thanks for your help

  • Run time Error while Creating Expense request

    Dear Friends ,
    In   E-Payment ( Expense  Claim )   creation , While clicking on Enter Receipts application is going to run time error for only one user.    
    Run time Error Info :
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
    Exception              CX_SY_REF_IS_INITIAL
    Short text
         Access via 'NULL' object reference not possible.
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "CL_WDR_P13N_UTILITIES=========CP" had to be
          terminated because it has
         come across a statement that unfortunately cannot be executed.
    Error analysis  
        An exception occurred that is explained in detail below.
       The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
        caught in
       procedure "PRESET" "(METHOD)", nor was it propagated by a RAISING clause.
       Since the caller of the procedure could not have anticipated that the
       exception would occur, the current program is terminated.
       The reason for the exception is:
       You attempted to use a 'NULL' object reference (points to 'nothing')
       access a component (variable: "LR_CONTEXT_ELEMENT").
       An object reference must point to an object (an instance of a class)
       before it can be used to access components.
       Either the reference was never set or it was set to 'NULL' using the
       CLEAR statement.
    How to correct the error 
         Probably the only way to eliminate the error is to correct the program.
       If the error occures in a non-modified SAP program, you may be able to
       find an interim solution in an SAP Note.
       If you have access to SAP Notes, carry out a search with the following
       keywords:
       "OBJECTS_OBJREF_NOT_ASSIGNED" "CX_SY_REF_IS_INITIAL"
       "CL_WDR_P13N_UTILITIES=========CP" or "CL_WDR_P13N_UTILITIES=========CM002"
       "PRESET"
    Information on where terminated
        Termination occurred in the ABAP program "CL_WDR_P13N_UTILITIES=========CP" -
         in "PRESET".
        The main program was "SAPMHTTP ".
        In the source code you have the termination point in line 60
        of the (Include) program "CL_WDR_P13N_UTILITIES=========CM002".
        The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
        procedure "PRESET" "(METHOD)", but it was neither handled locally nor declared
        in the RAISING clause of its signature.
        The procedure is in program "CL_WDR_P13N_UTILITIES=========CP "; its source
         code begins in line
        1 of the (Include program "CL_WDR_P13N_UTILITIES=========CM002 ".
    Regards,
    Suresh .

    Hi Agrawal
    As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
    close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
    Regards
    Srinath

  • Run time Error in accessing Analyzer on VIsa 64 bit, Office 2007 and SAP GU

    Hello experts-
    I can not run Bex Analyzer using WINDOWS VISTA HOME PREMIUM 64 bit OS, Office 2007 and SAP GUI 7.10
    I am receiving Run time error "5" and does not let me open or create a new query. Please share your experience and thoughts so that I could be able to fix this issue
    Thanks

    Hi Suresh,
    Check the RFC connection of Source system. It seems that your rfc connection is not working properly. So make sure that you are able to establisthed the connection between these 2 systems.
    Regards
    Subhash

  • Run time error while closing the CRM Order using BAPI

    Hi Experts,
    Need your invaluable suggestions here.Apologies for the lengthy mail, intention is to give clear idea of the issue.
    I am facing an issue while closing the CRM orders. According to our business process, when an issue is solved we will keep the order in resolved status only. We will not directly close the order from the CRM tool, instead we have created a custom program for the same purpose.
    For the custom program we will give input as the order number and execute it, this will close the order.
    Here close the order means assigning it to Close status as well assign the reason code.
    We have created some reason codes for closed status.
    So when the program is run the Order moves from resolved status to closed status along with reason code.
    But of late we are facing some problems with this program, it is giving run time error for some CRM orders.
    Run time error message : The ABAP/4 Open SQL array insert results in duplicate database records.
    The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught in procedure "CRM_SERVICE_OS_UPD_OST_DU" "(FUNCTION)", nor was it propagated by a RAISING clause.
    Please find my code which have used in the custom program
    Closing the resolved SOs in the system
        CALL FUNCTION 'CRM_STATUS_CHANGE_EXTERN_OW'
            EXPORTING
              objnr                     = iv_guid
              user_status          = lc_status_closed
           EXCEPTIONS
             object_not_found          = 1
             status_inconsistent       = 2
             status_not_allowed       = 3
             OTHERS                        = 4.
        IF sy-subrc <> 0.
          WRITE :  'Error at maintaining status'.
        ENDIF.
    Set reason code
    build lt_subject
        ls_subject-ref_guid = iv_guid.
        ls_subject-katalogart = 'A2'.
        ls_subject-codegruppe = 'ZR000003'.
        ls_subject-code       = 'ZR33'.                      " Reason code
        ls_subject-mode       = 'A'.
        APPEND ls_subject TO lt_subject.
    build lt_ossset
        ls_osset-ref_guid        = iv_guid.
        ls_osset-subject_profile = 'ZREASON03'.
        ls_osset-profile_type    = 'G'.
        ls_osset-subject         = lt_subject.
        APPEND ls_osset TO lt_osset.
    build lt_service_os
        ls_service_os-ref_guid  = iv_guid.
        ls_service_os-ref_kind  = 'A'.
        ls_service_os-osset     = lt_osset.
        APPEND ls_service_os TO lt_service_os.
    build lt_input_fields
        REFRESH: lt_input_fields, lt_field_names.
        CLEAR  : ls_input_fields, ls_field_names.
        ls_field_names-fieldname    = 'CODE'.
        APPEND ls_field_names TO lt_field_names.
        ls_field_names-fieldname    = 'CODEGRUPPE'.
        APPEND ls_field_names TO lt_field_names.
        ls_field_names-fieldname    = 'KATALOGART'.
        APPEND ls_field_names TO lt_field_names.
        ls_field_names-fieldname    = 'SERVICE_PROFILE'.
        APPEND ls_field_names TO lt_field_names.
        ls_input_fields-ref_guid    = iv_guid.
        ls_input_fields-ref_kind    = 'A'.
        ls_input_fields-objectname  = 'SERVICE_OS'.
        ls_input_fields-field_names = lt_field_names.
        APPEND ls_input_fields TO lt_input_fields.
         CALL FUNCTION 'CRM_ORDER_MAINTAIN'
          EXPORTING
            it_service_os     = lt_service_os
          CHANGING
            ct_input_fields   = lt_input_fields
          EXCEPTIONS
            error_occurred    = 1
            document_locked   = 2
            no_change_allowed = 3
            no_authority      = 4
            OTHERS            = 5.
        IF sy-subrc <> 0.
          WRITE :  'Error at maintaining reason'.
        ENDIF.
        CALL FUNCTION 'CRM_ORDER_SAVE'
          EXPORTING
            it_objects_to_save   = lt_header_guid
            iv_update_task_local = lv_update_task_local
          IMPORTING
            et_saved_objects     = lt_saved_objects
          EXCEPTIONS
            document_not_saved   = 1
            OTHERS               = 2.
        IF sy-subrc <> 0.
          WRITE : 'Error at saving'.
        ELSE.
          WRITE : 'Successfully Closed'.
          COMMIT WORK AND WAIT.
        ENDIF.
    Run time error is coming at COMMIT WORK AND WAIT statement.
    Please let me know any corrections are required in the above program.
    When I analyzed the run time error I have found that it trying to insert the record in CRMD_SRV_OSSET for that CRM order, but already one record is present in the table for the same CRM order number.
    For most of the CRM orders there is no entry in this table so they are closing successfully but for a few orders for which there is an entry we are getting the above run time error.
    There is nothing wrong with the orders which have an entry already in the table CRMD_SRV_OSSET, I need to close these kind of orders with out run time error.
    Kindly provide your feedback.

    Hi Dinakar,
    You posted this in APO PPDS forum. This question should go to PP forum where someone could answer it.
    Please close this thread and open a new thread in PP forum so that you could get help quickly from the relevant experts.
    Regards - Pawan

  • Portal run time error while accessing R/3 transaction code

    Hi all,
    We have configured R/3 system and BW system to the Portal.
    In R/3 system we have user ids named "ADMIN" and "FIAR" . ADMIN is for adminstrator and FIAR is for FIAR module. I created the same user ids in Portal , for ADMIN i have assigned ADMINSTRATOR role and for FIAR BI as it is also for our BW system.
    But when iam checking the r/3 iviews for FIAR , it shows PORTAL RUN TIME ERROR , while for ADMIN it works fine.
    Can any body have some ideas about this , pts will be assigned,
    Thanks ..

    Have you collected the error log details which looks similar to the below one??
    "The initial exception that caused the request to fail was:
    User has no RFC authorization for function group SDIFRUNTIME.
    com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: User has no RFC authorization for function group SDIFRUNTIME.
    at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
    at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1442)
    at com.sap.mw.jco.JCO$Client.execute(JCO.java:3979)
    at com.sap.mw.jco.JCO$Client.execute(JCO.java:3416)
    at com.sap.mw.jco.JCO$Repository.execute(JCO.java:20471)"

  • How to display "Non-Fatal Run-Time Error In Function Panel" dialog?

    I'm learning how to develop an IVI-C specific driver using LabWindows/CVI. When I run my function from its function panel and it returns an error, I would like to display a dialog with both the error code and error message (as opposed to simply returning an error code on the function panel). This would save the user from having to call Prefix_error_message() to translate the error code to its error message. NI-DCPower driver is a good example of this behavior (see attached error dialog). How do I show the "Non-Fatal Run-Time Error In Function Panel" dialog? Any help is greatly appreciated. Thanks!
    Attachments:
    ErrorDialog.png ‏8 KB

    Hi Shawn,
    Thank you for replying to my post. The checkErr is just an error handling macro defined in ivi.h to goto Error: tag when the function returns a non-zero value. I have been using the checkErr macro (as well as viCheckErr and other macros) in my driver.
    Using the same hp34401a specific driver as an example, please allow me to explain my question in more details:
    Let's take the hp34401a_close function as an example. It is a simple function with only a few lines of code:
    When the hp34401a_close function is run from its front panel using an invalid session handle (e.g. "8" in this screen capture):
    You will get three "Non-Fatal Run-Time Error" popup dialogs, one from each of the IVI library functions that it calls: Ivi_LockSession, Ivi_UnlockSession, and Ivi_Dispose. However, there is no "Non-Fatal Run-Time Error" popup dialog from the hp34401a_close itself.
    My IVI-C specific driver is behaving identical to the hp34401a specific driver.
    In comparison, if run niDCPower_close function from its front panel using an invalid session handle (using the same "8" in this screen capture):
    You will only get one "Non-Fatal Run-Time Error In Function Panel" from the niDCPower_close function itself:
    I think the behavior of niDCPower driver is much better than the hp34401a driver. It replaces the three "Non-Fatal Run-Time Error" popup dialogs from the IVI library with a single "Non-Fatal Run-Time Error In Function Panel" popup dialog from the driver function itself. I would like to do the same thing with my driver but have not figured out how to display a "Non-Fatal Run-Time Error In Function Panel" dialog. Thanks in advance for your help!

  • System is giving ABAP run time error while perform LT06 or create TO with r

    Hi SAP WM Gurus,
    System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
    Short dump has not been completely stored. It is too big.
    P_MENGA = P_MENGE.
    007940       P_UMREZ = 1.
    007950       P_UMREN = 1.
    Can you give any idea on this issue.
    Thanks and Regards,
    SHARAN.

    Hi,
    Go to Tcode ST22 and mentione the dump code there and check.
    Also take help[ of Abapers to fix it.
    Thanks
    Utsav

  • ABAP run time error while perform LT06 or create TO with respect to posting

    Hi SAP WM Gurus,
    System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
    >> Short dump has not been completely stored. It is too big.
    >       P_MENGA = P_MENGE.
    007940       P_UMREZ = 1.
    007950       P_UMREN = 1.
    Can you give any idea on this issue.
    Thanks and Regards,
    SHARAN.

    This part is just the place in the program where the error occured, but why the error occured is mentioned earlier in the dump.
    Maybe you have a too big number in the field and hence a field overflow, maybe you have a character instead of a number in the field.
    Read the dump from the beginning. if you dont know how to read a dump,then try to get help from any local Abaper.

  • Error: No SAP Business one application is running

    Hi
    I got error "No SAP Business one application is running" when try to start our Add-on from SBO Client using remote desktop.
    Problem Description: Add-on has been installed on server successfully. I want to access remote desktop of the client machine, and when login remotly to the client machine and open SBO client and start our addon from addon manager then it gives the above error.
    If we dont access the client machine remotely and login to the client machine directly then addon connected well.
    suggest me what to do to resolve this error.
    Thanks...

    Hi
    I was just approached by someone else with such an issue...
    We use Windows Terminal Services Client to access training systems - without issues.
    Do you use sth like Citrix with load balancing?
    There such issues might happen, but I don't have a real good idea what the issue might be in your case.
    Maybe someone else has experienced the same problem - and resolved it?
    regards,
    Frank

  • Need design Docs for Business One.

    HI All,
    Background: I  am from a SCM background and wanted to familiarize myself with SCM software of SAP specifically for the SMB market.
    What I want to learn: As mentioned above, the SCM solution of SAP for SMB market...all modules related to WM (Warehouse Management).
    My interest in Architecture/Application: Both - technical as well as functional aspects of the SCM with a focus on WM.
    From my perspective for SCM all modules of WM - Receiving, Putaway, Wave, Cross-Docking etc.
    Will it be possible for you to assist me find some relevant documents/ppts regarding the same?
    Thanks in advance,
    Harsh.

    Hello Harsh,
    Good to learn about your interest in knowing the WM side of SAP B1.
    SAP Business One (out of the box) does not really have a WM / WMS module to handle the different aspects of the warehouse function.
    This is being supplimented by a few Add-ons which provide this functionality to SAP B1.
    RadioBeacon is one such addon from a company called Accellos based out of Toronto, Canada.
    CitiXsys also has a WMS solution for Business One and that apart there are a few.
    Pretty much all software would handle the basic WMS functions of Receiving, Putaway, Picking, Cross dock, Replenishment etc.
    Unless you work with the specific Addon you would not have anything to learn on the SCM / Logistics / WMS side right out of Business One.
    Let me know if you need more details
    Suda

  • OOT: Configuration Wizard for Business One (Tools)

    Hi All,
    Do you have any idea to download "configuration wizard for business one tools" ? I've try download it, but unfortunately the connection suddenly terminated.
    Somebody like to share?
    Thanks and regards
    (the tools is taken from download menu from this forum)
    Edited by: Susanne Klemm on May 7, 2008 1:51 PM
    Edited by: Philip Eller on May 21, 2008 9:02 AM

    Hi,
    Did you try this link?
    https://www.sdn.sap.com/irj/sdn/softwaredownload?download=/irj/sdn/go/portal/prtroot/docs/library/uuid/1099ac47-4c73-2a10-69af-d11b130cc68a
    Regards,
    Paul SAP Business One Forums Team

  • Business Content Activation - run time error

    Hi guys,
    We were at plugin 2002.1. We installed PI 2002.2 and PI 2003.1 on top of it.
    After the plug-in upgrade, we are at support pack 9 for SAP-BW and 13 for BI-Content. For aba and basis, we are at 620 and support pack 32.
    As part of the regression testing after the 2003.1 plugin upgrade, we found out that the business content activation abends with the following run time error.
    Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
    Exception              CX_SY_OPEN_SQL_DB
    Looks like it is trying to insert into table RSOLTPSOURCEFIET and the row already is existing. I thought the activation process is supposed to update something if it is already out there.
    If we just select the 'only necessary', the activation goes through ok, but if we select 'before and after in the data flow', we get this abend.
    Any clues???
    Best regards,
    makaleem

    Hi Seow,
    This is how I resolved it. I looked at the ST22 closely and one of the messages indicated that the number range is missing in tran SNRO for an infoObject. I created an entry for that infoobject using SNRO and tried activation and it worked.
    When we created an OSS for SAP to look into it, they recommended the following two things. I tried these two but it did not work. I am mentioning them below just in case they may help you.
    1) Sometimes there is inconsistency in the content cache when trying to activate objects and we have to delete the repository cache. To delete the repository cache, go to RSA1 ---> Business Content -
    > Extras ---> Delete Rep Cache
    2) Execute SAP_DROP_TMPTABLES program for types 1,2,3 and 6.
    If this helps, don't forget to assign points.
    Abdul

  • Run-Time error '-2147417848 (80010108) in Crystal Report on SAP BW Query

    I have installed Crystal Report 2008 SP1 and the Business Objects Integration kit for 3.1 but when I try to create a report on top of an SAP BW query using the toolbar, after entering the logon parameters for SAP BW, I get a error message :
    Run-Time error '-2147417848 (80010108)
    Automation error
    The object invoked has disconnected from its clients.
    CR exits after this error message.
    I have tried uninstalling the Kit and CR, cleaning up the registry, and installing it again and still got this error message - It is the same for all my SAP BWs.
    Anyone ever had this?
    Thank you,
    R.

    Is this still an issue?

Maybe you are looking for