SAP BI LOADING ISSUE

i have a quary which is taking 2 hours daily but today its taking long time what could be the reagion.

Hi Praveen,
It depends on many factors such as ,the volume of data, number of resources available for loading, if loading to cubes then check for indexes. Also check if all the previous loads were successful.(The infoprovider as data target and as well as source).
Regards,
Priyanka

Similar Messages

SAP Mobile Sales 2.0 delta load issue for Sales Orders

Hello,
we have used Mobile Sales 2.0 with a Windows app for a while now. Our current issue is that sales reps won't see any historical sales order data on their devices.
Background
Due customer requirements, we need to make small changes to customer master data attributes and reload all customers from ERP to CRM. Then we ran delta loads (MAS_PARTNER followed by all other objects) to DOE, in which virtually all 5000+ customer accounts were compared. The delta load ran for about 3 days (some performance bottleneck we haven't located yet).
During the delta load, data on devices was inconsistent. Accounts were missing and all transaction data disappeared. After the delta loads, all accounts and contacts are OK, save for a few. Data from activities (appointments, tasks) have reappeared, as they should. Only sales orders won't reappear. The sales orders exist in the backend and belong to active accounts and sales reps.
Settings and troubleshooting so far
We don't have any limitations for sales orders in CRM Sales Mobile configuration.
We've run delta loads for all objects in transaction SDOE_LOAD.
MAS_CUSTOMIZATION etc seem fine.
We've re-run initial load for sales orders from CRM.
In the test system, we've even reinitialized the whole CDS database on DOE and on the devices, then re-ran the loads.
Checked steps suggested in discussion
SAP CRM 2.0 initial load issue
Historical sales orders (those created before the master data reload) exist in the backend, but don't show up on the device.
If I change one of those historical sales orders in the backend, it gets sent to the device.
If I create a new sales order in the backend or on the device, it is saved and replicated just fine.
To sum it up, it seems DOE is unable to identify the sales orders relevant for replication.

First Doubt i got clarify by my self as we can go with Unwired Runtime option .
But i still have doubt in :
2. How can i Modifying the Main Menu for iOS.
i am able to customize the same for windows using files SybaseCRM.Configuration.xml file.
Same how can i do for iphone/ipad.

Does resteasy API have class loader issues when using via OSGi

Does resteasy API have class loader issues when using via OSGi

Hi Scott,
THis isnt an answer to ur Question, but could u tell me which jar files are needed for the packages:
com.sap.portal.pcm.system.ISystems
com.sap.portal.pcm.system.ISystem
and under which path I coul dfind them.
Thnx
Regards
Meesum.

Report loading Issue

Hello all,
I am using Oracle 6i for report and oracle10g for the database.I have created a matrix report in oracle Report but which report taking so much time to show the output it almost taking more than 10 minutes,at the same time that query executed within 1 minute in toad which used in matrix report.
kindly guide me how to solve the loading issue.

I did not used any formula column in my report,all the values are taking from query.
But I used different types of format trigger in my report for the coloring purpose.Does it make any problem?

Data Load Issue "Request is in obsolete version of DataSource"

Hello,
I am getting a very strange data load issue in production, I am able to load the data upto PSA, but when I am running the DTP to load the data into 0EMPLOYEE ( Master data Object) getting bellow msg
Request REQU_1IGEUD6M8EZH8V65JTENZGQHD not extracted; request is in obsolete version of DataSource
The request REQU_1IGEUD6M8EZH8V65JTENZGQHD was loaded into the PSA table when the DataSource had a different structure to the current one. Incompatible changes have been made to the DataSource since then and the request cannot be extracted with the DTP anymore.
I have taken the follwoing action
1. Replicated the data source
2. Deleted all request from PSA
2. Activated the data source using (RSDS_DATASOURCE_ACTIVATE_ALL)
3. Re transported the datasource , transformation, DTP
Still getting the same issue
If you have any idea please reply asap.
Samit

Hi
Generate your datasource in R/3 then replicate and activate the transfer rules.
Regards,
Chandu.

Index.php loading issue

I finished and uploaded a new site in .php.
I have a graphics loading issue only with IE.
The js accordion with images will not reload after returning to the home page.
Anyone out thier that can shed some light on this?
http://carpetcleaningsantabarbarapro.com/index.php
Thank you in advance
Crissymarie

Ken might be on to something. The current release of jQuery is 1.7.2 which is compatible with jQuery Cycle.
For the latest core library, you can link to jQuery's CDN like so:
<script type="text/javascript" src="http://code.jquery.com/jquery-latest.min.js"></script>
You have some improperly nested <h3> tags around your lists on lines 170 and 191. To keep your code error free, simply delete the heading tags.
Finally, as a courtesy to your site visitors, consider adding a cookie so people don't have to watch the Flash Spokesperson every time they go to your home page. The link below shows how:
http://alt-web.com/DEMOS/cookie-test-show-hide-flash-intro.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

How to Extract Data from SAP and Load it into Essbase

Hi All,
Can you recommend some ways to extract data from SAP and load it into Essbase?. I have no knowledge about SAP, not sure how I can perform this task. Can I use ODI for this job?
Thanks

hi,
Not sure if this helps but give a try
you can create connection from EAS to SAP .. using a plug-in .. if you have access to oracle Support go for [ID 968961.1]
or
below are steps
1. In EASPATH\console, open components.xml in a text editor.
2. Under <PluginList>, enter <Plugin archiveName="SAP" packageName="com.essbase.eas.sap.ui"/> before the closing </PlugIn> tag.
3. Save and close the file.
4. In EASPATH\console\bin, open admincon.lax in a text editor.
5. Search for lax.class.path= and append ;..\lib\sap_client.jar;..\lib \sap_common.jar to the entry. Save and close the file.
6. In EASPATH\server\bin, open adminsvr.lax in a text editor.
7. Search for lax.nl.java.option.additional, and append -DRFC_INI=EASPATH\server\saprfc.ini. Save and close the file.
8. Create a new environment variable, RFC_INI, with a value of EASPATH\server\saprfc.ini
9. Copy librfc.dll andsapjcorfc.dll to EASPATH\server\bin. You may need to obtain these files from SAP.
let me know if it works :)

TileList data load issue

I am having an issue where the data that drives a tilelist
works correctly when the tile list is not loaded on the first page
of the application. When it is put on a second page in a viewstack
then the tilelist displays correctly when you navigate to it. When
the tilelist is placed in the first page of the application I get
the correct number of items to display in the tilelist but the
information the item renderer is supposed to display, ie a picture,
caption and title, does not. The strange thing is that a Tree
populates correctly given the same situation. Here is the sequence
of events:
// get tree is that data for the tree and get groups is the
data for the tilelist
creationComplete="get_tree.send();get_groups.send();"
<mx:HTTPService showBusyCursor="true" id="get_groups"
url="[some xml doc]" resultFormat="e4x"/>
<mx:XMLListCollection id="myXMlist"
source="{get_groups.lastResult.groups}"/>
<mx:HTTPService showBusyCursor="true" id="get_tree"
url="[some xml doc]" resultFormat="e4x" />
<mx:XMLListCollection id="myTreeXMlist"
source="{get_tree.lastResult.groups}"/>
And then the data provider of the tilelist and tree are set
accordingly. I tried putting moving the data calls from the
creation complete to the initialize event thinking that it would
hit earlier in the process and be done by the time the final
completion came about but that didn't help either. I guess I'm just
at a loss as to why the tree works fine no matter where I put it
but the TileList does not. It's almost like the tree and the
tilelist will sit and wait for the data but the item renderer in
the tilelist will not wait. Which would explain why clicking on the
tile list still produces the correct sequence of events but the
visual component of the tilelist is just not working right. Anyone
have any ideas?

Ok, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.

BI Load issue in the transformation/DTP after SP 17

Hello,
After SP 17 applied in our BI system, we are having load issue in one particular transformation/DTP.
See below the errors:
u2022 Messages for 101 data records saved; request is red acc. to
configuration
u2022 Thee is no active nametab in the system, although an active ABAP/4
Dictionary object was expected. Reactivate the ABAP/4 Dictionary object.
Also I have activated the DSO, transformation and DTP. Also I went to SE14 and try to adjust my DSO, SE11 and activate the table but still having the issue.
Can someone advise me on how to resolve this issue?
Thanks a lot.
Cesar

Hi,
Do the following: In BI, run transaction SE38 >> RSDG_CUBE_ACTIVATE to recreate the Metadata information
for the Info-provider.
Then execute another program via SE38: RSDD_RSTMPLWIDTP_GEN_ALL
See Note 1161940 and 1152453 for more details.
Regards,

BW sales load issue

I have a problem with this. The jobs in the screen snapshot below are running too long - 2LIS_11_VAITM, 2LIS_11_V_ITM, and 2LIS_13_VDITM. They use to run for just a couple of minutes. The job configuration is; when the first job finishes a delay of 10 minutes will be incurred then the second job will run, then another 10 minute delay before the third job runs. After these 3 jobs are complete an activation job needs to run. This activation job began to fail because the first 3 jobs were not finished. For now, the activation job has been moved but we need to understand why these are running longer and fix it. We may be experiencing a problem with database performance in PDF but I would not think it would take that much longer.
This is the BW sales load issue
The info-package group is schedule @ 00:05 am and it contains 3 info-packages: VAITM, V_ITM and VDITM with 10 minutes execution gap.
The first VAITM started 00:05:46 and ended it up in BW at 00:09:02.
Then we have 10 minutes delayed between jobs.
V_ITM started 00:20:12 and for some reason it finished at 01:00:51. We can see communication between PDF and BWP took much longer than normal.
Then we have 10 minutes delayed between jobs
At 01:00:25 the activation job started and failed. It requires the info-packages to be in GREEN status but V_ITM finished @ 01:00:51.
It probably failed because V_ITM still had YELLOW status at the moment.
VDITM started 01:12:02 and finally finished it load at 02:09:16. A big communication delayed between system.
See below an example of the load on the 01/14/2007. It looks normal communication between systems
Could you please give solution for this.
Thanks
Vasu.

Hi,
For every job you define and at the same time, you can also define the priority
levels to each job, since, during your job execution might be your job queue is
full with some other background processings, so try setting up the priority levels
of the job.
cheers,
Pattan.

Demantra Data Load Issue

I am new to Demantra. Have installed a stand alone Demantra system in our server. In order to load data, I created a new model, defined item and location levels, then clicked on 'Build Model'. The data is loaded into 3 custom tables created by me. After creating the model, I cannot login to 'Collaborator Workbench', it gives message 'There are system errors. Please contact your System Administrator'. Can anyone please tell me what I am doing wrong and how to resolve the issue.
Thanks

Ok, so if ASO value is wrong, then its a data load issue and no point messing around with the BSO app. You are loading two transactions to the exact same intersection. Make sure your data load is set to aggregate values and not overwrite.

Integrated WL/Jdeveloper class loading issue

Hello,
I am trying to run a deployed project , getting into this class loading issue. Any idea?
javax.security.auth.login.LoginException: java.lang.LinkageError: loader constraint violation: when resolving interface method "com.scat.util.identity.UserFactory.lookup(Ljava/lang/String;)Lcom/scat/domain/identity/User;" the class loader (instance of weblogic/utils/classloaders/ChangeAwareClassLoader) of the current class, com/scat/auth/authentication/login/UserLoginModule, and the class loader (instance of sun/misc/Launcher$AppClassLoader) for resolved class, com/scatl/util/identity/UserFactory, have different Class objects for the type com/scat/domain/identity/User used in the signature
Thanks
Ram

How many times are you loading the com/scat/domain/identity/User type?
Is this in the system classloader and the application? and are you using class loading filtering in the application, for example,
in weblogic.xml - prefer-web-inf-classes?

Can some1 tell me abt sap data loader in hr..

hi every1,
can some 1 tell me abt sap data loader in hr..if u have some documentatiom it will be great. apart from lsmw,bapi,direct inputs,bdc what are the other ways of data conversions.. thanx in advance

PL check this <a href="https://forums.sdn.sap.com/click.jspa?searchID=1350793&messageID=11323">thread</a>.
~Suresh

Classes developed in ECC6 by SAP to load these business objects

Hi All,
I have created a class and i want Classes developed in ECC6 by SAP to load these business objects.
Please help me,
Thanks

Thanks to All,
Sorry I could not reply you back soon as I busy and I though before I reply you back let me do some HW myself. Below are my findings.
We are using Forms 6i, we went through an upgrade from 9.3 to 9.7 recently because of the DST as 9.3 is not capable of taking those patches. We are also using an object library but object inherited from the library are OK.
All objects part of the “tmplate” related to “visual attributes” are the main problem. I can see the code for attached triggers.
Example:
FRM-18108: Failed to load the following objects.
Source Module:tmplate
Source Object: WHEN-WINDOW-RESIZED
Form level trigger:
begin
SET_RUNFORM_PROPERTIES; -- (this is a library procedure)
exception
when form_trigger_failure then
raise form_trigger_failure;
end;
I tried creating a form with the same name as “tmplate” and created a form level trigger WHEN-WINDOW-RESIZED, complied and saved it in the same directory as all the other forms, but still this object was not attached.
The most critical are the “visual attributes” when I check the properties it has nothing, no properties are inherited.
I converted the fmb to fmt and this is what I found for the visual attribute, LOV_SELECTION_LIST.
DEFINE F50T
BEGIN
TP = 738
TI = 9
TN = 328
TV = <<"LOV_SELECTION_LIST">>
END
DEFINE FRM50_IDFO
BEGIN
IDFOS_POI = 902
IDFOS_OID = 908
IDFOS_NAM = <<"LOV_SELECTION_LIST">>
IDFOS_TYP = 74
IDFOS_OOI = 1
IDFOS_OPN = 355
IDFOS_CNT = 2
END
Is this something that can be converted back to actual properties?
Thanks to all once again,
Have a nice weekend...
Habeeb

IPC SAP SPE Loader service

Hi everyone,
While trying to download R3 prices to IPC, folowing error occurs. Can someone hlep me?
<i>Cannot register receiver. A receiver with the requested settings is already running (RFC Destination: IPC, Gateway host: r3q, Gateway service: sapgw62, Program ID: IPCDL) Possible reasons: 1. The receiver is in use by an other user. Check. 2. You have cancelled a previous download. Very likely a cleanup is still running. Wait at least three minutes and try again. 3. If you STILL run into problems try to stop and restart the <b>SAP SPE Loader service</b>. Caution: Running initial downloads will be stopped. Running synchronizations will not be affected. </i>
Thanks Bogdan

solved

SAP BI LOADING ISSUE

Similar Messages

Maybe you are looking for