SAP BI market these days
Hi experts,
How is the demand for SAP BI skill set these days. I have been on one project for a long time and thought is it time to try something new.
Hello,
Extended maintenance is not offered for releases such as
SAP Business Information Warehouse 2.0B, 2.1C, 3.0B, and 3.1 Content
The original end of Mainstream Maintenance, which was scheduled for November 30, 2005, has been extended by 13 months at no additional cost and ends at December 31, 2006
SAP BW3.0B - End of mainstream maintenance 31.12.2006
SAP BW 3.1 CONTENT - End of mainstream maintenance : 31.12.2006
NW2004 - End of mainstream maintenance: 31.03.2010 Extnd Maint ->31.03.2013
NW2004s - End of mainstream maintenance: 31.03.2013 Extnd Maint ->31.03.2016
Thanks
Chandran
Similar Messages
-
How Large is Too Large for a Movie These Days?
Hi, we're developing our portfolio site which will have a LOT
of images that must be very high quality. So to keep quality up I
know we have to sacrifice file size (or vice-versa).
We've divided each of the sections of images into separate
movies so there is usually less than 8 images per movie. That way
someone would only need to wait if they clicked to see a specific
movie.
- My question is: What is considered 'large' for a movie file
in these days of broadband?
We are not planning on having preloaders for the individual
movies, and would like them to come up pretty quickly (so no
sluggishness or blank screens). I'm also looking into how to have
the movies loading in the background so that there would be less or
no delay once they are called up.
As an example, one of our larger sized movie tests showed a
size of around 350k for med-high quality, and about 750k for really
good quality. We prefer to have the quality of the latter, but
don't want people to get frustrated waiting.
On our local med-fast broadband (3.0Mb/Sec DSL) the large
movie loads up pretty much instantly and looks great. But we don't
want to alienate anyone.
THANKS!I think you simply have to judge your audience - are they
likely to have ultra fast broadband or ten year old dial up
connections ?
My rule of thumb is to work for the lowest connection likely.
In the UK most medium to large commercial organistaions (my
market) have at least a 4mb connection so I optimise everything for
that. (Always bearing in mind that it's shared by hundreds or
thousands of users at any given location). -
Upload Account to SAP hybris Marketing (customer engagement intelligence)
Hello community,
I am trying to setup a demo for SAP hybris Marketing (f.k.a. customer engagement intelligence). Therefor I already uploaded contacts and interactions via function module CUAN_CE_INTERACTIONS_POST_FLAT. I assume there is no need to use function module CUAN_CE_IC_POST_FLAT, since contact data is also loaded with module CUAN_CE_INTERACTIONS_POST_FLAT.
Unfortunately I did not find out a way to upload accounts. I know SAP hybris marketing is not intended for maintaining accounts, these should be maintained in the source system, but is there a way to upload accounts for demo purpose. Maybe there is a function module similar to the modules for contacts and interactions. If not which would be the account tables I need to fill via the import functionality of HANA studio.
Is there a possible way for me to further check the issue? Any comment is much appreciated.
Thanks a lot and best regards,
MussieHello Community,
finally I was able to upload accounts. Bassically I created a custom account table which I joined with the Infomodells AT_CUSTOMER_SEARCH and AT_CUSTOMER_BY_TEAM_MEMBER for account-search. This is described in the extensibility guide chapter 16 'Enabling the Search for a Data Basis Other Than SAP ERP or SAP CRM'.
http://service.sap.com/~sapidb/011000358700000830442013E
Unfortunately when opening an account (see 2nd screenshot below) out of a contact fact sheet with an interaction (see 1st screenshot below), the Account will be opened without any data. I would have assumed to see the interactions of the contacts that belong to the particular account. Also I can not see any account name.
So basically I'm wondering how to add account name and interactions to the account I have uploaded.
I have added the necessary screenshots for your reference. Is there a possible way for me to further check the issue?
Thanks and regards,
Mussie -
Error message if i want to register in SAP service market place
Hi...
I am getting this error message while registering in SAP service market place how can i solve this problem and what is the way to register.The following is the error message:
A user ID cannot be created with the specified data, because no (valid) e-mail domain is registered for your customer number.
Please contact your SAP system administrator and request that he/she maintain your company's e-mail domain. You can then request a user ID again here.Hi,
Did you solve this problem? We are also facing the same.. -
what is the best way to "upgrade" a powerbook g4 with a powerpc chip? it seems that many things are not supported these days. can't download software, update my iphone, download video, etc. can i get the latest software? thanks for the help!
Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
The DVD should look like this
Caution - Leopard does not support classic mode. So, if you currently open OS 9 apps in classic mode, you won't be able to do this if you upgrade to Leopard.
Cheers, Tom -
I NEED TO KNOW IF IN SAP WE HAVE THESE STANDARD REPORTS FOR PP Division.
i NEED TO KNOW IF IN SAP WE HAVE THESE STANDARD REPORTS FOR PP Division. OR I NEED TO CREATE BI/ABAP REPORTS
PLEASE HELP.
Please tell me how to check in sap these reports exists if not on functional report how to give fields and table name etc.............i am pretty new and i need to submit this work by monday its matter of survivial please please help
1. lOSS ORDER REPORT as PER GAAP
2. wWORK IN PROCESS SUMMARY (FIELDS ARE JOB NUMBER,ORDER TYPE,CUSTOMER NAME, NET SELLING PRICE,MATERIAL,MATERIAL OVERHEAD,labor hrs,labor, labor ovehead, total)
3. 1099 REPORT (VENDOR,VENDOR CODE,DISCRIPTION AND VENDOR AMOUNT)If you are collecting your responses outside of Formcentral your forms will continue to work past June. This can be done by email or the Acrobat Pro mechanism. If your data is being collected in a Formscentral response table then it will cease working in July.
Andrew -
ODI Schedule with except these days of the month option
Hi,
I am trying to schedule one scenario which it needs to run between every month 26 to 5(next month). I am scheduling as below.
Context: Global
Agent: ODIAGENT
LogLEVEL: 5
Status:
Active for the period
Except these days of month (6-25)
Execution:
Daily 7:00:00 PM
after saving schedule the colour of schedule is orange in color (generally in Green). After updating my Agent also i am not able to view the schedules?
am i missing anything? My ODI Version 11.1.1.6. help us.
Regards,
PrakasVcolor is fine indicating your special conditions.
You should be able to see the schedule in the job list in view schedule dialog after updating schedules on the agent.
Make you you adjust the from and two schedule filter ont eh view schedule dialog appropriately and click on refresh to make the change effective in window. -
Hi all,
How will be the SAP-ABAP market in the coming 6 months in India.Any SAP-ABAP projects are going on in India. pls let me know? because i am planning to come to India. and How is HR-ABAP Market in India
Edited by: Vijay Babu Dudla on Jan 25, 2009 4:58 AM
Moved to Coffee CornerHi,
ABAP market is good, a bit tired after the weekend, but getting better. You can give him a call, 1800-market.
I guess he already started, he had a meeting early this morning.
Hope this is needful enough.
Regards,
Diego -
Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.
Take each of the following steps that you haven't already tried.
1. If you've recently plugged anything into the audio-out (headphone) port, plug and unplug it a couple of times.
2. From the menu bar, select
▹ System Preferences ▹ Sound ▹ Output
Check the settings. The internal speakers should be selected as the output device, the Mute box should not be checked, and the volume slider should be at least halfway to the right.
3. Look inside the headphone port. If a red light is coming from the port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a headphone mini-stereo jack of the proper size.Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
4. Boot in safe mode by holding down the shift key at the startup chime. It will take much longer than usual. You don't have to log in; just reboot as usual (without holding any keys) when the login screen appears. (Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.)
5. Reset the NVRAM.
6. Reset the SMC.
7. Reinstall OS X after backing up all data as a precaution. You won't need your backup unless something goes wrong.
8. Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed. -
What is the current version of SAP in Market ?
Dear,
What is the current version of SAP in Market ?
Thanx & Regards,
Mohammad Nabi,
[email protected]hi,
currently ECC 6.0 is available and solution manager 4.0 is being used.
However please let us know the context of the question so that we can throw light may be.
regards
sadhu kishore -
How to send a message to SAP Service market
Hi All,
I have requirement to Implement OSS notes 693746 and 848961. This notes is for release 500. We are using ECC release 600. If i implement this notes. Is it works.
I want to know if it works or not. How can i raise a message to SAP service market to know it works or not.
Regards,
AravindHi Arvind,
For raising an issue to OSS, you need to have a login id on SAP market place.
In case you have a login id you can directly go quick links under SAP support portal section.
Once you enter your user name & password then you will be navigated to a new page.On this page on the top-left side you will see a link for you inbox,once you go into your inbox select create new message tab and you can post your queries to sap online assisstant.
Thanks & regards,
Subodh -
Is networking reliable these days?
Hi,
We have a old iMac and someone suggested using it as a server and networking our computers (another iMac and an eMac) using OS X Server. I know this will be great efficiency-wise but I'm a little concerned. Are we likely to suffer network crashes etc or are they much more stable these days?
I would be grateful for any feedback.
Many thanks!
PowerPC G3 Mac OS X (10.3.9)One hardly needs to use OS X Server if all you want to do is share files. Here is some reading material that may be helpful:
http://docs.info.apple.com/article.html?artnum=106658
http://docs.info.apple.com/article.html?artnum=106796
http://docs.info.apple.com/article.html?artnum=107369
http://docs.info.apple.com/article.html?artnum=106461
If you want to be able to share files and share an internet connection from a cable or DSL modem:
Setting up a local Ethernet network
Equipment needed:
Cable/DSL modem: usually supplied by the ISP
Gateway/Router: at least a 4-port router, but you can get them with more ports if you need them. (Alternatively, you can get a switching hub to provide additional ports.)
CAT 5 Ethernet cables: one cable is needed for each device connected to the router plus one to connect the router to the cable/DSL modem.
1. Connect the Cable/DSL modem to the router's WAN port using an Ethernet cable (CAT 5 for 10/100.)
2. Connect each computer to the router's LAN ports using Ethernet cables. If you have network printers, etc. connect them to a LAN port on the router. If the router doesn't have enough ports, then you will need to purchase one with more ports or connect a switching hub to the router.
3. Now, for each Mac open its Network preference pane. Select the Built-in Ethernet port for configuration. In the TCP/IP configuration window set the connection/configuration to DHCP from the dropdown menu. Set your Location dropdown menu to Automatic and the Show dropdown menu to Built-in Ethernet.
4. Shut everything off. First, turn on the Cable/DSL modem and wait for the connect lights to indicate it has connected to the ISP. Next, turn on the router and wait to see if the Cable/DSL modem's communication status light starts to flicker. Also, if there is a status light on the router it should show a connection. Last, power up the computer. If all is well the TCP/IP control panel or Network pref pane should indicate an IP has been obtained from the router, usually in the 192.168.nnn.nnn range. If it's 169.xxx.xxx.xxx then you don't really have a connection.
5. If you have network printers connected each printer will have to be assigned its own unique IP address in the router's address range (usually 192.168.nnn.nnn.) Assign the printer(s) IP addresses above the number of computers that will be connected but within the router's DHCP address assignment range. Consult the router's documentation for that information. Consult the printer manual for how to assign an IP address to the printer. When you install the printer driver and/or Add the printer you will add it as an IP printer or LPR printer and use the IP address you assigned to the printer. -
Where can i find my windows product key ? am I not allowed to know this these days ?
Where can i find my windows product key ? am I not allowed to know this these days ?
If you bought a notebook with Windows 8, there are no product key stickers anymore.
The key is now digitally encoded in the BIOS.
http://www.mydigitallife.info/windows-8-to-have-oem-activation-3-0/
I don't have a notebook that came with windows 8, so I don't know if you can see it in the BIOS or not but that would the place to look.
Paul -
My Macbook is extremely slow these days...Is There Anything I can Do?
Hi,
My Macbook is running extremely slow these days. Not sure if there is anything I can do. I would appreciate any input on this.
I went to the Etresoft website and did the EtreCheck. This is what it came back with:
EtreCheck version: 1.9.12 (48)
Report generated 24 July 2014 9:14:30 PM AEST
Hardware Information:
MacBook (13-inch, Mid 2010) (Verified)
MacBook - model: MacBook7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information:
NVIDIA GeForce 320M - VRAM: 256 MB
Color LCD 1280 x 800
spdisplays_display_connector
System Software:
Mac OS X 10.6.4 (10F569) - Uptime: 0 days 0:47:27
Disk Information:
Hitachi HTS545025B9SA02 disk0 : (232.89 GB)
Macintosh HD (disk0s2) / [Startup]: 232.57 GB (53.25 GB free)
MATSHITADVD-R UJ-898 disk1 : (4.27 GB)
USB Information:
Apple Inc. Built-in iSight
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Kernel Extensions:
[not loaded] com.Belcarra.iokit.USBLAN_netpart (2.0.2) Support
[not loaded] com.Belcarra.iokit.USBLAN_usbpart (2.0.2) Support
[loaded] com.Cycling74.driver.Soundflower (1.5.2) Support
[not loaded] com.RemoteControl.USBLAN.panther (1.6.1) Support
[not loaded] com.RemoteControl.USBLAN.usbpart (2.0.6) Support
[not loaded] com.ZTE.driver.ZTEUSBCDCACMControl (1.2.4) Support
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.2.4) Support
[not loaded] com.belcarra.iokit.netpart.panther (1.6.1) Support
[not loaded] com.belcarra.iokit.usbpart.panther (1.6.1) Support
[not loaded] com.livescribe.kext.LivescribeSmartpen (1) Support
[not loaded] com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) Support
[loaded] com.vara.driver.VaraAudio (1.0.2) Support
[loaded] com.vmware.kext.vmci (3.1.3) Support
[loaded] com.vmware.kext.vmioplug (3.1.3) Support
[loaded] com.vmware.kext.vmnet (3.1.3) Support
[loaded] com.vmware.kext.vmx86 (3.1.3) Support
Startup Items:
AdobeVersionCue: Path: /Library/StartupItems/AdobeVersionCue
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.livescribe.PenCommService.plist Support
[not loaded] com.logmein.logmeinblanker.plist Support
[running] com.logmein.logmeinserver.plist Support
[loaded] com.logmein.raupdate.plist Support
[running] com.splashtop.streamer.SRServiceDaemon.plist Support
[loaded] com.vmware.launchd.vmware.plist Support
Launch Agents:
[running] cn.com.zte.usbswapper.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.google.keystone.agent.plist Support
[failed] com.logmein.LMILaunchAgentFixer.plist Support
[running] com.logmein.logmeingui.plist Support
[running] com.logmein.logmeinguiagent.plist Support
[not loaded] com.logmein.logmeinguiagentatlogin.plist Support
[running] com.splashtop.streamer.SRServiceAgent.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
[loaded] com.onlywire.client.app Support
User Login Items:
iTunesHelper
YouSendIt
Dropbox
Genieo
Livescribe AutoLaunch
Livescribe Connect AutoLaunch
Internet Plug-ins:
o1dbrowserplugin: Version: 5.4.2.18903 Support
LogMeInSafari64: Version: 1.0.660 Support
JavaPlugin2_NPAPI: Version: 13.2.0
PandoWebInst: Version: 1.0 Support
OfficeLiveBrowserPlugin: Version: 12.2.8 Support
Flip4Mac WMV Plugin: Version: 2.2.1.11 Support
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 Support
LogMeIn: Version: 1.0.660 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
LogMeInSafari32: Version: 1.0.660 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
iPhotoPhotocast: Version: 7.0
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 Support
QuickTime Plugin: Version: 7.6.6
Silverlight: Version: 4.0.50917.0 Support
Safari Extensions:
Omnibar: Version: 1.2
Streak: Version: 6.3
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.2
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
3rd Party Preference Panes:
BDSPrefPane Support
Flash Player Support
Flip4Mac WMV Support
Growl Support
Top Processes by CPU:
4% WindowServer
3% Safari
1% Safari Webpage Preview Fetcher
1% hidd
0% configd
Top Processes by Memory:
135 MB Safari
102 MB Safari Webpage Preview Fetcher
86 MB Genieo
51 MB JavaApplicationStub
51 MB mds
Virtual Memory Information:
619 MB Free RAM
750 MB Active RAM
168 MB Inactive RAM
253 MB Wired RAM
264 MB Page-ins
0 B Page-outsThanks for your quick response...
Ive just done this... it took quite a while to restart after this, I expect it was because of the reset...
I re ran the check... just to see if it made any obvious difference which is below...
Thanks again and I'll check back in if it hasnt helped..
EtreCheck version: 1.9.12 (48)
Report generated 24 July 2014 11:50:57 PM AEST
Hardware Information:
MacBook (13-inch, Mid 2010) (Verified)
MacBook - model: MacBook7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information:
NVIDIA GeForce 320M - VRAM: 256 MB
Color LCD 1280 x 800
spdisplays_display_connector
System Software:
Mac OS X 10.6.4 (10F569) - Uptime: 0 days 0:11:18
Disk Information:
Hitachi HTS545025B9SA02 disk0 : (232.89 GB)
Macintosh HD (disk0s2) / [Startup]: 232.57 GB (53.36 GB free)
MATSHITADVD-R UJ-898
USB Information:
Apple Inc. Built-in iSight
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Kernel Extensions:
[not loaded] com.Belcarra.iokit.USBLAN_netpart (2.0.2) Support
[not loaded] com.Belcarra.iokit.USBLAN_usbpart (2.0.2) Support
[loaded] com.Cycling74.driver.Soundflower (1.5.2) Support
[not loaded] com.RemoteControl.USBLAN.panther (1.6.1) Support
[not loaded] com.RemoteControl.USBLAN.usbpart (2.0.6) Support
[not loaded] com.ZTE.driver.ZTEUSBCDCACMControl (1.2.4) Support
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.2.4) Support
[not loaded] com.belcarra.iokit.netpart.panther (1.6.1) Support
[not loaded] com.belcarra.iokit.usbpart.panther (1.6.1) Support
[not loaded] com.livescribe.kext.LivescribeSmartpen (1) Support
[not loaded] com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) Support
[loaded] com.vara.driver.VaraAudio (1.0.2) Support
[loaded] com.vmware.kext.vmci (3.1.3) Support
[loaded] com.vmware.kext.vmioplug (3.1.3) Support
[loaded] com.vmware.kext.vmnet (3.1.3) Support
[loaded] com.vmware.kext.vmx86 (3.1.3) Support
Startup Items:
AdobeVersionCue: Path: /Library/StartupItems/AdobeVersionCue
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.livescribe.PenCommService.plist Support
[not loaded] com.logmein.logmeinblanker.plist Support
[running] com.logmein.logmeinserver.plist Support
[loaded] com.logmein.raupdate.plist Support
[running] com.splashtop.streamer.SRServiceDaemon.plist Support
[loaded] com.vmware.launchd.vmware.plist Support
Launch Agents:
[running] cn.com.zte.usbswapper.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.google.keystone.agent.plist Support
[failed] com.logmein.LMILaunchAgentFixer.plist Support
[running] com.logmein.logmeingui.plist Support
[running] com.logmein.logmeinguiagent.plist Support
[not loaded] com.logmein.logmeinguiagentatlogin.plist Support
[running] com.splashtop.streamer.SRServiceAgent.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
[loaded] com.onlywire.client.app Support
User Login Items:
iTunesHelper
YouSendIt
Dropbox
Genieo
Livescribe AutoLaunch
Livescribe Connect AutoLaunch
Internet Plug-ins:
o1dbrowserplugin: Version: 5.4.2.18903 Support
LogMeInSafari64: Version: 1.0.660 Support
JavaPlugin2_NPAPI: Version: 13.2.0
PandoWebInst: Version: 1.0 Support
OfficeLiveBrowserPlugin: Version: 12.2.8 Support
Flip4Mac WMV Plugin: Version: 2.2.1.11 Support
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 Support
LogMeIn: Version: 1.0.660 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
LogMeInSafari32: Version: 1.0.660 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
iPhotoPhotocast: Version: 7.0
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 Support
QuickTime Plugin: Version: 7.6.6
Silverlight: Version: 4.0.50917.0 Support
Safari Extensions:
Omnibar: Version: 1.2
Streak: Version: 6.3
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.2
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
3rd Party Preference Panes:
BDSPrefPane Support
Flash Player Support
Flip4Mac WMV Support
Growl Support
Top Processes by CPU:
8% WindowServer
3% mdworker
2% Safari
1% LogMeInGUI
0% configd
Top Processes by Memory:
104 MB Safari
76 MB Genieo
53 MB JavaApplicationStub
41 MB WindowServer
41 MB Finder
Virtual Memory Information:
665 MB Free RAM
586 MB Active RAM
295 MB Inactive RAM
244 MB Wired RAM
217 MB Page-ins
0 B Page-outs -
When sap abap market is going to start
hello
can anybody tell that how is sap abap market? when it is going to start?Hi,
ABAP market is good, a bit tired after the weekend, but getting better. You can give him a call, 1800-market.
I guess he already started, he had a meeting early this morning.
Hope this is needful enough.
Regards,
Diego
Maybe you are looking for
-
Back order line in transact move order form , drived the inventory negative
Hi, I had problem with transacting some lines in several move orders (it was stuck and giving error each time I tried to transact or delete from view update allocation –> delete line) In order to cancel these lines to proceed the manufacturing proces
-
WRT54G not working....all lights on
Last night my router was working fine. Xbox 360 was connected to Xbox Live and I was on the Internet on my PC. Then, I lost my connection all of a sudden. Connecting PC directly to the modem works fine, so it is definitely a router issue. Now, when I
-
IDOC scenario: material will not be created
Hi! I am implementing the IDOC scenario and facing with the error what either the IDOCs receiving on business system B are red or yellow. The error is: Trying to create: F1000-G2 The value YBF01 is not allowed for the field MARA-MATKL Trying to chang
-
Best way to transfer file between two web apps
I'm looking for some architectural suggestions. Seems like a simple problem, but I'm really struggling. -- Problem: We have two web servers, both running apps in JBoss. I need to pass a file of roughly 20MB from one server to the other, and get the o
-
Where can I download the OS X Mavericks?
Hi, Now that the Yosemite is out, where can I download the OS X Mavericks? I do not care if I have to pay for it, as long as it is legal and last updated version. Some music production applications I use on a daily basis do not work on the Yosemite.