SAP BI - New Learner - Help Required

Dear Friends
I have started learning SAP - BI from a local traning center. I would appreciate if you all could guide me on where I should start my learning from? What training materials that I need to look into? what is the time i need to spend to complete the module so that i can start applying for jobs? Any information that would help a new starter to get ready to apply for a job in 6 to 8 months time.
Your help will be highly appreciated.
Regards
Have a nice day!!!
Sudarshan Balakrishnan

Hi ,
Welcome to SDN ....
You can follow schedule what even SAP Suggests like order is.....
1. Basis of BW ( InfoObjects ,Cubes etc..)
2. Reporting.
3. Extraction.
4. Data Modeling ( Star Schema...etc)
5. Authorization.
6. Performance Tuning..
Regards,
Vijay.
Message was edited by: vijay Kumar
And Help.sap.com will sure help u a lot as u can find solution to all ur problems there as beginer , if not u can always post at SDN.

Similar Messages

SAP MM Functional Specs -Help Required

Gurus , I am newly taking assignment for SAP MM functional .I request any one from this forum to help me in sending a sample Functional spec for SAP MM /SAP MM customization .It will be a great help for me as I am new in this area and just got trained
Pl send your links or sample functiona spec to
[email protected]

Hi James,,,
Functional Specs differs from client to client how they use it. Anyways from ur client u can take the specs it shd be in the Process Database.
In general the Spec has the following info ....
1. Process Owner.
2. Requested by :
3. SAP MM consultant incharge( Ur Name )
4. Abaper, If required.
5. Integration Team Members.
6. AS- IS & TO- BE
7. If any User exits or enhancements needed then mentiion in details.
Insense the config & Tech part need to be developed shd be mentioned clearly.
Regards
Balaji

Error during data transfer from Lotus Notes to SAP via JCO - Urgent Help Required

Dear SAP Expert:
I need your help! Recently getting error during data transfer to SAP. I need your suggestion!
I am transferring Lotus Notes data to SAP via JCO, recently getting the below error msg, could you pls tell me what could be the reason?
Please suggest me how to fix that kind of issue.
"com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in ABAP/4 statement when processing an internal table. table.
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1244)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3842)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3287)
at SAPAdapter.execute(Unknown Source)
at JavaAgent.fillBapiAndWriteBackToNotes(Unknown Source)
at JavaAgent.NotesMain(Unknown Source)
at lotus.domino.AgentBase.runNotes(Unknown Source)
at lotus.domino.NotesThread.run(NotesThread.java:249)
Thanks in advance! Your help would be highly appreciated! Thanks again!

error is clear, check your abap code.

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying "attempt to access invalid address" then "application not respo

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying “attempt to access invalid address” then “application not responding” Suggestions how to access would be much appreciated. Tks. Stuart

What is the size of your hard disk? PSE 4 is a very old program and I suspect it is not able to access the entire hard disk on your machine. Just a thought here.

VL10 A - Data type "LIKPVB" was found in a newer version than required

hi Gurus!
in transaction VL10A i get a short dump that states that the data type LIKPVB was reloaded and but in a newer version than required in program RVV50R10C.
I checked the abap dictionary for the data type and it said that it was modified a month ago by SAP.
To my knowledge no new configuration or notes ware applied around this period.
The solution that the dump indicates is really wise "try to restart the program".
I searched for sap notes that would apply or sdn posts and came up empty.
Please help !

I guess you have no clue either...
any hints?

BODS / SAP : what set-ups are required for communicating with each other ?

Hi.
There is a new SAP system
And there is a new BODS installation.
Both on independent server machines but on the same lan network.
On the test system of BODS. We tried to see how the communication happens with SAP.
While we try some test jobs by trying to pull a simple table on SAP R/3
In Dataflow, we used simple SAPR/3 ABAP flow. And put it into target database thro query transformation.
In the datastore,
We used the Generate and Execute option,
with a path on the local directory of BODS server for creating the ABAP program and the dat file.
However,
We are always getting error on batch job schedule.
Although the user is having rights on the R/3 table
And can login into SAP R/3 system and check the table.
Still we get an error saying Databstore unabel to connect to R/3 system. Check for user login etc.
For anyone whose login we use. We get the error.
However, if i directly generate the code on the ABAP flow (without running the job),
make the program available on R/3 system.
and then run the job as execute preloaded
this works fine without any error.
and we are able to see the data in the target table.
Now both the systems are new.
And am not aware of the initial set-ups which are required for communication between SAP / BODS.
Are WE missing something on the SAP side setups - for generate and execute option to be used?
Is there anything specific to be done for ease of the communication between SAP server and BODS server in this regard.
Can anyone share some inputs on this.
Actually for any user with full admin rights too, on the sap side, if we use the user login for R/3 connectivity for this particular "generate and execute" option, it errors out after nearly 10 minutes. Then the error says, login info not correct.
So basically, the communication channel by itself between SAP R/3 and BODS seems to be locked somewhere.
If anyone with SAP admin expertise - can help or advise on this.
Many thanks
Indu
Edited by: Indumathy Narayanan on Sep 13, 2011 9:20 PM

Getting data out of R/3 requires two distinct setup tasks, and they don't have much to do with each other.
The first basic task is to get the little ABAP extraction programs loaded and run in R/3. You can pre-load them and then call them, or generate, upload, and execute them all on-the-fly, at BODS runtime. During development, use "Generate and Execute" for your ABAP.
Once that's done, you have four different choices to get the data back: "Direct download", "Shared directory", FTP, and "Customer Transfer". Normally, you'll use either FTP or "Shared directory". Refer to the documentation (the BODS SAP Supplement) for a description of all this.
In all cases (or at least, quite certainly, using the FTP and Shared Directory methods), the ABAP extraction programs are directed to plop their output as flat files in the "Working directory on SAP server." For testing, you can look in that folder to see if any flat files are appearing when you submit an ABAP data flow. If not, then either 1) your ABAP program isn't getting in there (a Basis admin should be able to tell you), or 2) it's not running (ditto), or 3) it's running but unable to generate the output file (ditto), because a) SAP isn't permitted to write to that folder, or b) the folder doesn't exist (it needs to be defined from the perspective of the SAP server).
If you do see files appear in the "Working directory on SAP server" when you run a BODS job w/ an ABAP dataflow, then the problem is that BODS can't fetch them. If you're using the "Shared directory" method, which is suitable for and often used in all-Windows environments, then the account under which the Job Server in question is running must have access to the "Working directory on SAP server," but this time from the perspective of the Job Server. So if, for instance, SAP was directed to put the flat files on a local folder, say, "E:\USR\SAP\BODS", then you might want to share this folder out as, for instance,
sapdev1\bods (for an SAP host called "sapdev1"), and then enter "
sapdev1\bods" in the "Application path to shared directory" field, in your SAP datastore configuration. If your Job Server service is logging-in as "Local System," though, it won't be able to get there -- it needs to log-in as an AD domain account w/ rights to that share. Get it? Try logging in to your BODS job server computer with the AD "service account" setup for use by the Job Server service, and try to open a file on the "Application path to shared directory". If you can't, then BODS won't be able to get data from ECC, either. FTP works similarly -- if you're using that and having trouble, please re-post.
Best wishes,
Jeff Prenevost
Data Services Practice Manager
itelligence

Adobe Audition R6025 Virtual C++ Crash (Help Required, Please!)

Hi. I posted a problem about Rewire earlier but I seem to have sort of overcome that. My problem now is that I get a crash with a dialogue box stating that AA is shutting down:
'To continue working where you left off, please restart Audition.'
This is followed by another dialogue:
'Microsoft Visual C++ Runtime Library Runtime Error! R6025 - pure virtual function call'
And then it shuts down.
I searched for solutions and have discovered that r6025 is a very general fault that can mean a number of things. Here's the specific thing that causes the crash:
If I have a session from me previous machine open, it'll play fine. If I try to change the input to a track, that's when the crash occurs. I can do it if I create a new session (I think - I haven't done anything complicated from scratch since I got a new PC this week).
I have tried a few things that have been suggested on other posts:
Reinstalling AA (a few times).
Running Audition in compatibility mode for XP SP2, XP SP3 and not in any compatibility mode.
Uninstalling Quicktime (as suggested http://forums.adobe.com/thread/414943).
Deleting the Application Data backup so that a new one gets created next time (as suggested http://kb2.adobe.com/cps/403/kb403357.html).
Disabling all plugins.
Trying it out on another User ID.
None of these measures have helped as of yet. I'd really appreciate some help or some suggestions of actions I could take. My system is an AMD Phenom II X4 945 (AM3) in a Gigabyte mainboard with 4GB RAM, running Windows 7 Professional 64-bit, AA 3.0.1 and using my Audigy 4 Pro from my old PC rather than the onboard Realtek HD Audio (for Asio purposes).
Please post if you need any more details to help with diagnosis.
Anticipated thanks.

Hi. Thanks very much for the posts. I'm aware of the 48kHz issue from previous incompatibilities with other people's sessions. Always managed to work in 48kHz with Reason before using XP. I've just tried the ASIO4ALL driver with the same result, I'm afraid. Not really sure if the problem is limited to Reason because I don't own any other Rewire apps. I'm really hoping to get this sorted out because I use Reason an awful lot in conjunction with Audition as I think they make a nice pairing of complimentary skills (lack of a tempo track notwithstanding). I can change inputs on sessions with no Rewire tracks in them, using either Creative Asio or ASIO4ALL and it doesn't crash. I can also use Reason quite happily on it's own. I've even managed to create a new session with a couple of wav's and then set Reason on another track with no problems (although these sessions are very simple). I'm really stumped. I suppose I could try to run the whole thing in XP Mode but that negates some of the advantages of using my new computer and requires me to install everything, Audition, Reason and all my plugins, for a second time. I will do that if I have to but that's what my Dad, a scientist, would call an inelegant solution. Again, I really appreciate the suggestions you've come up with thus far. The ASIO4ALL idea was a good one and I'll keep it installed too as an option for when other problems (inevitably) arise. I'm loath to discard what was a reasonably expensive sound card (even if it is a bit dated and patently not designed for audio engineering). In my old set up, I used the Audigy for mixing and monitoring but my MBox as in input due to it's Focusrite preamps. Don't get me started on my MBox and Pro Tools!!! Haven't even started to install that yet because I know it'll be a nightmare. It's hard enough trying to install an update from Digidesign. I'd really be much happier to get things back to the way they were - plus a much faster processor and more RAM. That was the whole idea of the new machine. I really love AA and have done since Cool Edit 1.2. I'm too set in my ways to try and learn new software, not too mention too poor to buy any!! Any ideas really gratefully accepted.

XSLT mapping Help Required.

XSLT mapping Help Required.
Hi Experts,
I am New to XSLT Mapping. I am practising the below Example:
InputXML File:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
XSL StyleSheet File:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/Gen"
Xmlns:ns1=”http://XYZ.com/Test”>
<xsl:template match="/">
<ns1:MT_XSLT_Target>
<Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
<Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
</Name>
<Street> <xsl:value-of select="concat(concat(ns0:Mt_XSLT_Source/Person/Address/Houseno,' '),
ns0:Mt_XSLT_Source/Person/Address/Street)"/> </Street>
<City> <xsl:value-of select="ns0:Mt_XSLT_Source/Person/Address/City"/> </City>
</ns1:MT_XSLT_Target>
</xsl:template>
</xsl:stylesheet>
The Desired Output shuold be:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_XSLT_Target xmlns:ns1="http://XYZ.com/Test">
<Title>Male</Title>
<Name>Anshul Chowdhary</Name>
<Street>83/b 2nd Main</Street>
<City>Mysore</City>
</ns1:MT_XSLT_Target>
I have refered the xsl in xml and i am getting the below Oupt in a Single line like this:
Anshul Chowdhary Male 2nd Main 83/b Mysore
I am Unable to display in Target XML Fomrat as shown above. Please check and do the needful.
Regards,
GIRIDHAR

Hi,
I have used below for testing.
Input xml:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
xsl code:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/gen"
    xmlns:ns1="http://XYZ.com/Test">
    <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
    <xsl:template match="/">
        <ns1:MT_XSLT_Target>
            <Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
            <Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
            </Name>
            <Street> <xsl:value-of select="concat(concat(/ns0:MT_XSLT_Source/Person/Address/Houseno,' '),
                /ns0:MT_XSLT_Source/Person/Address/Street)"/> </Street>
            <City> <xsl:value-of select="/ns0:MT_XSLT_Source/Person/Address/City"/> </City>
        </ns1:MT_XSLT_Target>
    </xsl:template>
</xsl:stylesheet>
For testing in PI ,change the extension from .txt to .xsl and zip it and upload into PI as an imported archive .
Regards
Venkat

Urgent help required: Query regarding LC Variables

Hi All
Sometime earlier I was working on a performance issue raised by a customer. It was shell script that was taking almost 8-9 hrs to complete. During my research I came across a fact that there were some variables which were not set, the LC variables were impacting the sort funnel operations because of which the script was taking a long time to execute.
I asked them to export the following commands, after which the program went on smoothly and finished in a couple of mins:
export LC_COLLATE=en_US.ISO8859-1
export LC_MESSAGES=C
export LC_MONETARY=en_US.ISO8859-1
export LC_MONETARY=en_US.ISO8859-1
export HZ=100
export LC_CTYPE=en_US.ISO8859-1
export LANG=en_US.UTF-8
Later I did recover that setting the LC_COLLATE to C, is not helping and the program was again taking a lot of time. Few questions that I want to ask are:
1. Can someone please tell me, what each of these variable mean and how these values make a difference.
2. When I exported LC_COLLATE=en_US.ISO8859-1, it worked fine, but when i tried with the defalut value LC_COLLATE=C, then why the program didnt work.
As this issue is still going on, hence I would request All to provide their valuable inputs and let me know as much as possible.
Appreciate your help in this regard.
Thanks
Amit
Hi All
A new development in this regard. The customer has send us a screen shot in which they were trying to export the locale variable using the commands which I have pasted above. I can see in the screen shot that while exporting LC_COLLATE and LC_TYPE, they get a message that ""ksh: export: couldn't set locale correctly"".
Request everyone to please give their inputs as it's a bit urgent.
Thanks for all the help in advance.
Thanks
Amit
Some help required please...
Edited by: amitsinhaengg on Jul 22, 2009 2:03 AM
Edited by: amitsinhaengg on Jul 22, 2009 2:06 AM

LC_CTYPE
Controls the behavior of character handling functions.
LC_TIME
Specifies date and time formats, including month names, days of the week, and common full and abbreviated representations.
LC_MONETARY
Specifies monetary formats, including the currency symbol for the locale, thousands separator, sign position, the number of fractional digits, and so forth.
LC_NUMERIC
Specifies the decimal delimiter (or radix character), the thousands separator, and the grouping.
LC_COLLATE
Specifies a collation order and regular expression definition for the locale.
LC_MESSAGES
Specifies the language in which the localized messages are written, and affirmative and negative responses of the locale (yes and no strings and expressions).
You can use command
# locale -k LC_CTYPE
to see more detail about each type.

How to open new window with required size when clicking on image in a table

Hi,
There is an image column in advanced table. i want to open new window with required parameters(size, toolbar, status bar,etc..) and with that transaction context.
can any one help plzzzzzzzz?
Thanks
Raju

You can also use OAF js function to open modal pop up:
openWindow(self, '<url>','longTipWin', {width:900, height:400}, true); return false;
--Mukul

Search Help with in a serach help required in SRM 4.0

Hi,
Requirement: Search help required for Product Category field in the Search help for Product(BBPH_PRODUCT) in SRM portal.
This search help is used in Create shopping Cart transaction. The hyper link on Internal Goods/Services leads to the search help BBPH_PRODUCT.
My analysis:
The field Product Category (CATEGORY_ID) has search help(COM_CAT_HIER) attached to its data element. When I single test the search help BBPH_PRODUCT in SAP GUI,I can see the search help for field product category in the selection dialogue box. However the same does not appear on the corresponding screen in HTML.
Please let me know whether I need to do some thing to make the search help appear on the HTML screen?
With Regards,
Prakash Kamath

Hi Prakash,
I have the same problem but with another field. Unloading point. Could you please tell me how did you solve this problem with displaying F4 help on html/ SRM portal?
Thank you very much.
Best regards,
Danijela ZIvanovic

How to backup new learned remote-control data for the IR-remote APP???

Hello @ all,
does anybody know a way to backup the new learned remote control on XPERIA Z Tablet?
I found a database under:
"system/vendor/etc/sony-ir-remote/db"
But after I've saved new learned remote controls the date and the size of these DB's
are the same as before. Therefore the IR-remote control APP dosn't save the new data
in these files.
Furthermore there isn't a button in the remote-control APP to backup new learned remote controls.
And I can't choose the remote control APP in the backup function APP from the XPERIA Z Tablet
to save the data. Also the backup with the Sony PC Companion Software dosn't save the learned
remote controls. Who develops such a dross mobile software?
Sorry SONY, but you have the most unpalatable support I've lived to see!
The first SONY support center refered me to another support center.
The mobile support center does not answer to my questions per mail.
Then I call the mobile support center. The answers were shallow and standard.
The support engineer want to ask the development and call back.
However, I am still waiting for promised recall.

I am facing the same problem.
I have spend a few days to configure and train my Sony tablet to configure for all my remotes such as aircon and lighting. I did a backup using the Sony companion to my PC. When my tablet was faulty and serviced. But the backup did not recover the IR remote settings and codes which I programmed previously. I also tried your backup restore app but it also does not save the configuration.
It is VERY IMPORTANT for me to backup the settings.
Please provide the folders and path of where the IR REMOTE settings and personal configuration and codes trained were kept so that I could back them up. Are these path protected area that required rooted access?
Hope that Sony could update the app to include backup of new trained codes and settings and in the meantime to provide a procedure of how to backup the setting and trained IR codes with or without rooting the device.

Help required on Execution of Surveys through E-mail Campaigns

Dear all,
Our Client wants to execute the Customer Satisfaction Survey through an E-mail Campaign and wants to receive the customer feedback to evaluate the customer response.
I have the following concerns to map this requirement in SAP CRM
1. as per some SAP documentation we have to create an URL link for our Survey, here how can we insert this link in to an E-mail? Should we need to create a personalized E-mail form to insert this link?
2. Upon customer clicks on this URL link, and enters the feedback form, how the responses are getting back to CRM server and where the Questions and answers are storing in SAP?
3. What configuration do we need to do in SAP CRM to achieve this requirement?
4. How can we evaluate the Customer answers and responses without integrating BIW system?
5. What standard reports available in SAP CRM to evaluate the customer response based on ratings given to the each answer?
6. How to track whether customer review the mail or not, in case if customer doesn't want to give the feedback?
I believe that, in SAP CRM a standard solution and reports will be available to address this requirement. I request you to help me in resolving the problem.
it would be helpful if you can refere andy step by step configuration manual for this requirement.
Your suggestions and help will be highly appreciated.
Thank you
Raghu ram

There are quite a few threads with these questions answered in this forum:
SAP CRM: Marketing

SAP WM-PP: Spit transfer requirements

Hello,
We are working in a WM-PP scenario with transfer requirements and transfer orders.
For one process we need to use the "2 step picking" functionality of the SAP system.
In the release of the production order, the system is creating the transfer requirements. SAP is creating one transfer requirement per operation, with many items, one item for each component in the operation.
This is the problem, instead of one "big" transfer requirement with many items, we need to have many transfer requirements. This is because for the "2 step picking" process we need to have more than one "transfer requirement group" for the components of one production order operation.
The problem is that the "transfer requirement groups" can group "transfer requirements", no "transfer requirement items". If one transfer requirement is in the group, all its item with 2 step picking belong to the group.
Summing up, we need a way of splitting transfer requirement according to our criteria, in order to create several "transfer requirement groups" for the components of one production order operation.
As far as I know, we can only split transfer requirements in one operation according to the destination bin of the component.
Is there any other way of splitting transfer requirements?
Thank you very much for your help.

Hi all,
Thanks for the replies.
@ Jurgen: I have setup mail notifications, but I don't see any messages. It looks like SAP simply does not try to create a transfer order in the first place.
@ Bala: yes this has been checked. Actually I'm part of the project team so any changes would have been done by myself most probably. Anyway, no changes made to this part of the system.
Any suggestions?
Regards,
Oliver

Help required in Weblogic 6 - Creation & Configuration of Web Application

Forum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
Moin

Forum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
Moin

SAP BI - New Learner - Help Required

Similar Messages

Maybe you are looking for