SAP BI u2013 PI u2013 SAP R/3?

Hi,
Can anyone tell is this requirement is posiible because how we can send alerts to users after data loads with status becasue we can send alerts if any critical suitation occurs right?
How we can push data without manual.
1). SAP BI u2013 PI u2013 SAP R/3? I.e.; Delta generated in R/3 should pop into BI through PI directly without manual push/pull.
2).PI system for monitoring data loads and sends alerts to user (by e-mail) after data loads with status?
please help me out.

HI Raju,
To answer your question 1:
1). SAP BI u2013 PI u2013 SAP R/3? I.e.; Delta generated in R/3 should pop into BI through PI directly without manual push/pull.
It should be possible if you have the idocs avaialble in R/3 and BI systems for handling the data.
for question 2:
2).PI system for monitoring data loads and sends alerts to user (by e-mail) after data loads with status?
PI will send alerts for any failures within the PI system only.
Any failures outside the purview of PI will not trigger alerts and have to be handled by the system in which the errors occur.
Regards,
Ravi Kanth Talagana

Similar Messages

SSO Between SAP EP 7.0u2013 BOXIR2 SP1 u2013 BW3.5 Is SNC required?

We are trying to enable SSO between SAP EP, BO and BI so that users will be able to access Crystal reports (which have got backend as BW) from Enterprise Portal which are scheduled in BO enterprise server
Below are the details on our landscape.
1) SAP EP 7.0 Integrated with AD and SP Nego configured(if it fails users will use AD user id and pwd)
2) BO u2013 AD authentication is available as well as SAP Authentication got enabled using SAP BO Integration Kit. In BO reports are there which got backend as BW and scheduled successfully.
3) BW 3.5 is using SAP authentication(Not AD authentication)
4) SSO has been established between SAP EP and BW (user ids will be same in AD and BW)
5) BO has two servers bo1.yy.comp.com and bo2.yy.comp.com
6) SAP EP and BW has domain names as EP.xx.yy.comp.com and BW.xx.yy.comp.com u2013 additional u201Cxxu201D is there in the domain trail. So we have created a dns entry bo.xx.yy.comp.com which will resolve to bo2.yy.comp.com (CMS is running in this server) so that we meet the prerequisite for SSO with EP u2013 BO - BW.
7) BW is not configured with SNC.
Question 1- As per point 3 u2013 SAP Authentication is available in BO u2013
So in that BO server can we use ASPX page to read MYSAPSSO2 cookie generated by SAP EP and use that cookie to access report which got BW as backend?
Question 2
Do we need any more configuration for the SSO from EP - BO u2013 BW? (do we need to go for SNC?)
Even after reading many threads I couldn't understand the flow of SSO. Any advice will really help us overcome the hurdles.
Thanks in Advance
JayCeeDee

Question 1- As per point 3 u2013 SAP Authentication is available in BO u2013
So in that BO server can we use ASPX page to read MYSAPSSO2 cookie generated by SAP EP and use that cookie to access report which got BW as backend?
>>> Assuming you are getting SSO tickets from the portal that happens automatically when the SAP authentication is configured.
Question 2
Do we need any more configuration for the SSO from EP - BO u2013 BW? (do we need to go for SNC?)
>> You mention on the one hand SSO tickets, on the other hand Windows AD. Which one is it ? What is the authentication that the user will leverage to connect to the BusinessObjects Server ?
Ingo

Webinar:SAP NetWeaver Process Integration u2013 Advanced Adapter Engine in PI 7

+Please Note: This webinar is aimed at consultants, Patners and Customers in APJ Region and is scheduled at 2.00 - 3.00 p.m. Singapore Time (UTC +8)+
Dear valued SAP Experts,
Next SAP Intelligence Platform & NetWeaver RIG Expert Call Session will take place on Tuesday, September 1. The SAP Intelligence Platform & NetWeaver RIG Expert Call Sessions are designed to support consultants, partners and customers during their implementation projects. The sessions cover all different aspects of SAP NetWeaver and are aimed at experts, thus provide knowledge which is not available via standard training courses. The session duration is typically 60min and includes questions and answers.
Tuesday, September 1, 2009:
SAP NetWeaver Process Integration u2013 Advanced Adapter Engine in PI 7.1 EHP1
Time: 2.00 - 3.00 p.m. Singapore Time (UTC +8)
This event will feature Charu Goel with the SAP Intelligence Platform & NetWeaver Regional Implementation Group. Charu provides the following abstract:
With PI 7.1 Enhancement pack 1, we continuously thrive to bring in advancements in AAE. In this APJ expert call, we talk about the much awaited capability of IDOC packaging along with the enhancements in JMS. You will learn about the interaction between the AAE and ABAP stack, new enhancements on the JDBC adapter and overall improvements in the technical adapters available with PI 7.1 EHP1.
For meeting and Dial-in detail please register [here|http://www.surveymonkey.com/s.aspx?sm=qkBfQCM5FM_2f_2b4O0ihVpFRw_3d_3d]
Thanks & Best Regards,
Sarma Sishta

Hi,
This was one of the good session...
Especially the features such as;
-- TCP/IP connection control with JMS adapters
-- Empty file Handling
-- Set the various Attributes for Mail attachments via dynamic configuration (intially only subject line was possible)
-- Message Prioritization
-- single IDOC Ack for IDOC Packaging
-- IDOC packaging
-- and many more........................
Even the future indicatioon of IDOC J2EE based adapter will provide new direction to the existion IDOC related scenarios..
One thing that was changed in IDOC packaging is to control it via Sender Communication channel...intially we were doing it either via ECC system or with t-code "idxpw"
Its almost in same way...but from J2EE based adapter perceptive IDOC packaging will be available with Java stack...and will no need to depend only ABAp stack for this feature.
Thanks
Swarup

New article: SAP SRM Technical Scenarios u2013 Decision Matrix

Dear colleagues,
This is to inform you of my new article posted on SDN:
[SAP SRM Technical Scenarios u2013 Decision Matrix|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50df82f9-37f9-2c10-1584-c711fbb47544?quicklink=index&overridelayout=true]
The article discusses how to employ decision matrix methodology to facilitate the task of selecting a (primary) SRM technical / deployment scenario: Classic, Extended Classic, Standalone.
More SRM-related articles can be accessed under:
http://www.sdn.sap.com/irj/scn/articles-srm-all
Enjoy
Cheers,
Serguei

Hi Serguei,
Thanks a lot your article about the Technical Scenario -Decision matrix.
Continue your Good Work. I need a help.
I am SRM consultant for the past 3 +years..
I want to learn about Service procurment on my own Can you send some link or any articles related to service
procurement on my Business ID
Regards
G.Ganesh Kumar

Installation error u2013 SAP J2EE Engine, error at step importJavaDump

Dear All,
I have installed NetWeaver Developer Studio but getting problem for SAP J2EE Engine installation
I have given following parameter at the time of installation.'
           RDBMS MaxDB
           'package location' - C:\Program Files\NetWeaverDeveloperStudio\NW_JAVA_700SP14_SR3 \MAXDB76_NW07
           'Copy package To' - c:\sapdb
           UC Kernel nw 7.0 R3
           'package location' - C:\Program Files\NetWeaverDeveloperStudio\NW_JAVA_700SP14_SR3\NW05SR3_KRNL3
          'Copy package To' - Left empty
           Chose option - No SLD destination
My operating system is Window Vista Home Basic. Is vista support SAP J2EE engine?
MaxDB has been installed but how it can be checked whether it has been installed properly?
sapinst.log u2013 Error description
ERROR 2008-06-24 15:57:07.104
CJS-30049 <html> <head> </head> <body> Execution of <font face="Monospaced">JLoad</font> tool 'C:\Program Files\Java\j2sdk1.4.2_09\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DEVWP\MAXDB\install\sharedlib\launcher.jar" -showversion -Xmx512m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload "C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/lib/iaik_jce.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/jload.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/antlr.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/exception.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/jddi.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/logging.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/offlineconfiguration.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/opensqlsta.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/tc_sec_secstorefs.jar;C:\sapdb\programs\runtime\jar\sapdbc.jar" -sec AN2,jdbc/pool/AN2,
AnupGarg-PC/sapmnt/AN2/SYS/global/security/data/SecStore.properties,
AnupGarg-PC/sapmnt/AN2/SYS/global/security/data/SecStore.key -dataDir "C:/Program Files/NetWeaverDeveloperStudio/NW_JAVA_700SP14_SR3/NW05SR3_DEV_WP_1\JAVA_EXPORT\JDMP" -job "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DEVWP\MAXDB\IMPORT.XML" -log jload.log' aborts with return code 1.<br>SOLUTION: Check 'jload.log' and 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/jload.java.log' for more information. </body></html>
ERROR 2008-06-24 15:57:07.104
FCO-00011 The step importJavaDump with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump was executed with status ERROR .
jload.java.log u2013 Error description
java version "1.4.2_09"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-b05)
Java HotSpot(TM) Client VM (build 1.4.2_09-b05, mixed mode)
Jun 24, 2008 10:27:05 AM com.sap.inst.jload.Jload main
INFO: Jload -sec AN2,jdbc/pool/AN2,
AnupGarg-PC/sapmnt/AN2/SYS/global/security/data/SecStore.properties,
AnupGarg-PC/sapmnt/AN2/SYS/global/security/data/SecStore.key -dataDir C:/Program Files/NetWeaverDeveloperStudio/NW_JAVA_700SP14_SR3/NW05SR3_DEV_WP_1\JAVA_EXPORT\JDMP -job C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DEVWP\MAXDB\IMPORT.XML -log jload.log
Jun 24, 2008 10:27:07 AM com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
It would be great help if I can get any clue to solve this?
Thanks & Regards,
Anup Garg

Hi Anup,
If you want to install developer studio then you need not to install J2ee engine for this.
Actaully there are 2 products :
1. Developer studio
2. Developer workplace.
In fact these are not 2 products but if you want to install developer studio with local runtime environment then you need to install developer workplace.
So (J2EE engine + Developer studio)= developer workspace
you can install developer studio on XP, windows 2003 server and NT platform but not sure for VISTA. But it should work on vista with no problem.
but you can install developer workspace only on server platforms because it needs J2EE engine to be installed as a prerequisite.
in your case , you need windows 2003 server instead of vista if you want j2ee engine and developer studio both.
In case you only want to install developer studio, you can install it from developer workplace DVD .
browse to Dev workplace DVD( Example path for version 7.0)
DVD>IDE>IDE70setup
execute this setup. it will only installdeveloper studio.
please award points if above info is helpful.
regards
Saurabh

Docus about 3rd-party defined integration scenario: SAP Web AS u2013 SAP NW

Hi all,
we have an SAP integration solution which we want to get certified. We are interested in the third-party defined integration scenario: u201ESAP Web AS u2013 SAP Netweaver Application Serveru201C as similar products have this certification. Where can we find technical details/documents about this certification. Is there any sample scenario for this certification that we can use as a template.
Thank you in advance for your help.
Cheers
Jack

Dear 'jackwhite',
The SAP Integration and Certification Center (SAP ICC) has confirmed Uphantis ([http://www.uphantis.com]) as its first u2018SAP Certified in Integration Servicesu2019 partner within the EMEA region. SAP AG has certified Uphantis as its Consulting and Certification Service Partner for Independent Software Vendors. This certification enables Uphantis to implement and supervise the integration of ISV software with SAP solutions. The ISV will then be able to have this integration certified by SAP (u2018SAP Integration Certificationu2019).
Uphantis Integration Services ([http://www.uphantis.com/uis]) is an integration specialist with extensive knowledge in this field. Uphantis integration consultants have been trained by SAP and are certified in many different areas of expertise. This makes Uphantis a unique consulting partner, well acquainted with the requirements for developing an SAP certified solution.
Perhaps we should get in contact?
Best Regards,
KENNY VAN SLEUWEN
Senior Integration Consultant
Uphantis Integration Services
'SAP Certified in Software Integration Services'
I www.uphantis.com/uis
Uphantis | Connecting our future

SAPiens u2013 the Internet platform for SAP usersu2019 innovative ideas

Jobs & Career u2013 Students u2013 New 2009 u201CSAPiensu201D advertizing and SAP system message
This year there will be new iteration of SAPiens. Starting April 2009, this internet-based idea forum allows participants to suggest innovative ideas involving new fields of application and business areas as well as new products that SAP AG could pursue along with ideas for improving existing SAP software. Detailed Information will be presented shortly on the SAPiens idea platform at http://www.sapiens.info.
To promote SAPiens 2009 among the German-speaking SAP University Alliances community, we plan on creating a SAP system message in all systems hosted by UCC Munich and UCC Magdeburg for the German-speaking community, which will show on each initial log-on for one week during the summer term 2009. If you are customer of one of the mentioned UCCs and do not want this message to be presented to your students, please send an e-mail to optout(at)sapiens.info containing your system ID (usually a letter and two digits) and your client ID (a three digit number).
Contact:
Michael J. Huber, M.Sc. (TUM)
info(at)sapiens.info
Technische Universität München
Lehrstuhl für Wirtschaftsinformatik Prof. Dr. Krcmar
Boltzmannstr. 3
85748 Garching
www.SAPiens.info
Jobs & Karriere - Studierende u2013 Neuauflage von u201ESAPiensu201C in 2009 und Werbung über SAP Systemhinweis
Auch in diesem Jahr wird es wieder eine Neuauflage von SAPiens geben. In dem Internetbasierten Ideenforum können ab April innovative Ideen rund um neue Einsatzbereiche und Geschäftsfelder sowie neue Produkte für die SAP AG oder Verbesserungen bestehender SAP Software eingereicht werden. Detaillierte Informationen werden demnächst auf der SAPiens Ideenplattform unter http://www.sapiens.info bekanntgegeben.
Im Zuge der Vorankündigung von SAPiens 2009 ist das Einblenden eines SAP Systemhinweises auf den von den UCCs München und Magdeburg bereitgestellten SAP Systemen für die Dauer von einer Woche in der Vorlesungszeit des Sommersemesters 2009 geplant. Sind Sie als Kunde der genannten UCCs nicht mit dem Einblenden des Hinweises auf Ihrem System einverstanden, senden Sie bitte eine Email mit Ihrer Systemnummer (normalerweise ein Buchstabe und zwei Ziffern) sowie der Mandanten-ID (drei Ziffern) an optout(at)sapiens.info.
Kontakt:
Michael J. Huber, M.Sc. (TUM)
info(at)sapiens.info
Technische Universität München
Lehrstuhl für Wirtschaftsinformatik Prof. Dr. Krcmar
Boltzmannstr. 3
85748 Garching
www.SAPiens.info
Edited by: Sonja Hecht on Mar 26, 2009 12:33 PM

Jobs & Career u2013 Students u2013 New 2009 u201CSAPiensu201D advertizing and SAP system message
This year there will be new iteration of SAPiens. Starting April 2009, this internet-based idea forum allows participants to suggest innovative ideas involving new fields of application and business areas as well as new products that SAP AG could pursue along with ideas for improving existing SAP software. Detailed Information will be presented shortly on the SAPiens idea platform at http://www.sapiens.info.
To promote SAPiens 2009 among the German-speaking SAP University Alliances community, we plan on creating a SAP system message in all systems hosted by UCC Munich and UCC Magdeburg for the German-speaking community, which will show on each initial log-on for one week during the summer term 2009. If you are customer of one of the mentioned UCCs and do not want this message to be presented to your students, please send an e-mail to optout(at)sapiens.info containing your system ID (usually a letter and two digits) and your client ID (a three digit number).
Contact:
Michael J. Huber, M.Sc. (TUM)
info(at)sapiens.info
Technische Universität München
Lehrstuhl für Wirtschaftsinformatik Prof. Dr. Krcmar
Boltzmannstr. 3
85748 Garching
www.SAPiens.info
Jobs & Karriere - Studierende u2013 Neuauflage von u201ESAPiensu201C in 2009 und Werbung über SAP Systemhinweis
Auch in diesem Jahr wird es wieder eine Neuauflage von SAPiens geben. In dem Internetbasierten Ideenforum können ab April innovative Ideen rund um neue Einsatzbereiche und Geschäftsfelder sowie neue Produkte für die SAP AG oder Verbesserungen bestehender SAP Software eingereicht werden. Detaillierte Informationen werden demnächst auf der SAPiens Ideenplattform unter http://www.sapiens.info bekanntgegeben.
Im Zuge der Vorankündigung von SAPiens 2009 ist das Einblenden eines SAP Systemhinweises auf den von den UCCs München und Magdeburg bereitgestellten SAP Systemen für die Dauer von einer Woche in der Vorlesungszeit des Sommersemesters 2009 geplant. Sind Sie als Kunde der genannten UCCs nicht mit dem Einblenden des Hinweises auf Ihrem System einverstanden, senden Sie bitte eine Email mit Ihrer Systemnummer (normalerweise ein Buchstabe und zwei Ziffern) sowie der Mandanten-ID (drei Ziffern) an optout(at)sapiens.info.
Kontakt:
Michael J. Huber, M.Sc. (TUM)
info(at)sapiens.info
Technische Universität München
Lehrstuhl für Wirtschaftsinformatik Prof. Dr. Krcmar
Boltzmannstr. 3
85748 Garching
www.SAPiens.info
Edited by: Sonja Hecht on Mar 26, 2009 12:33 PM

SAP CRM 7.0 u2013 E2C Setup CRM via Email Toolset - Not Working

I am trying to implement the scenario mentioned in the SDN blog.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/30c2f74f-0ee0-2c10-63b1-8a8057ba38d0
However I am stuck with the Rule modeler, due to lack of documentation for scenario I am trying to implement.
My requirement is to invoke the Services I have maintained.
1> user will send "?" in subject line and they should get back links to the services they are authorized.
2> user will click one of the services and the service results is send back
So in rule modeler, what can be possible action and condition? Do I have to maintain any rules or Policy for the scenario I am trying to implement? I am getting the error "Resolution of rule AC00200136 for task TS00207914: no agent found".

Hello Kartik,
KIndly implement the note 1401384 and check if this helps in recieving the reponse back from the CRM system.
Regards,
Varsha

Oracle to SAP BI with BCS u2013 Best Data flow Design.

Hi,
We are a SAP implementation team. We are @ Blue Print stage. My client is a RETAIL Business Gaint. Client has 50 % of Transaction data and Master data in Oracle data base. Now we are moving to BI 7.0 and also has plans to use SAP-BCS.
We would like to map all the existing Oracle tables to BI. Provide any clue regarding the best Data flow (From Oracle 10G to BI 7.0).
Your quick and valuable suggestion/ links are highly appreciated.
Warm Regards,
Bab

Hi Ashok,
You have mentioned that you have a Oracle 10g system as a data inflow which perfectly sets the platform to extract the data from the Oracle system to SAP BW system.
This Can be done through the DB connect ,through where you could select the necessary tables and form them as a datasource in BI system,further creating the usual BI objects on top of the DS.
Once the Data is in BI ,we could pull the BI cube or form a replica of the cube in BCS application format to use it in the BCS environment.
Hope this helps,
Regards,
Rajesh.

Cells in SAP BW Query u2013 possible to use in Crystal Reports ?

Hello Experts,
we have the following scenario:
- Crystal Reports Report (CRR) on top of a SAP BW Query which uses cells
It seems that we cannot access the cells in Crystal Reports. Or does anyone know a way how to work with the cells ?
Many thanks in advance for your help !
Frank

Hi,
son in case you have a query with multiple structures you will see those structure in Crystal reports.
the structure with keyfigures is being resolved in actual measures in CR and the structure with characteristics will become a single item in CR returning several rows. the cell definition itself is totally transparent to CR.
Ingo

9KE0 Reposting profit centre u2013 SAP delivered Layout?

We are trying to repost profit centre for incorrect posting of profit centre entries in 9KE0. There is no SAP delivered layout available in the layout field. This may have been our first attempt of doing reposting for PCA in 9KE0. Anyone knows the name of SAP delivered layout or form so I can import them from client 000? Appreciate any help.

Hi,
if you call 9KEJ, all the available standard layouts will be displayed. You can use one depending on what
characteristic you need. For example: you can use 8A-001, if you only need characteristics profit center and account.
You can also use the transactions 9KES (also 9KET) to define your own layouts for the postings.
There you can only choose the fields which are in table GLPCT and also in structure RPCAC80.
So only this field will be activated forthe layout in 9KE0.
Regards,
Greta

IDoc u2013 HTTP Using SAP BC

Hi Experts,
I want to create the following scenario using SAP Business Connector.
SAP system sends an IDoc asynchronously to SAP BC. The SAP BC converts the IDoc into a standard IDoc XML document. After the conversion the SAP BC sends the XML document synchronously to an external URL of a business partner via HTTP.
Can anyone provide me with a document consisting of all the steps involved for the above configuration, right from SAP system to BC system.
Thanks & Regards,
Amit

hi,
so you're doing rosseta
>>can you please let me know from where can i get this file????
the lastest version of best practices cd can be downloaded from:
service.sap.com/swdc
then path:
Installations and Upgrades" SAP Best Practices" SAP BP FOR HIGH TECH" HIGH TECH - V1.600
but it's for 1.600 version and you're file should be for V1.471
so maybe you need to ask SAP where to download it if V1.600 DVD will not work
but try the link
Regards,
Michal Krawczyk

BusinessObjects Integration Kit for SAP u2013 key for 90 day evaluation version

Hello,
I have installed Crystal Reports 2008, a 30-Day evaluation version on my laptop, from here:
http://www.businessobjects.com/campaigns/forms/downloads/crystal/2008/datasave.asp
and I would like to connect my reports to the SAP Data Source (SAP ECC 6.0). For this I have downloaded the BusinessObjects Integration Kit for SAP - 90 day Evaluation version and I try to install it on my laptop. Unfortunately during the installation of the Integration Kit I receive a message u201CThe product key code is not valid or has expiredu201D. The Product key code and the Integration Kit itself I have taken from this page:
http://www.sdn.sap.com/irj/boc/index?rid=/webcontent/uuid/806c9894-42a5-2b10-648a-d900489b76da [original link is broken]
Could you please help me with the installation of this integration kit? What is wrong?

Hi,
do you have access to Service Marktplace [http://service.sap.com/support]? You can get the temporary keys for BOBJ under Keys & requests .
Regards,
Stratos

Sap Hr Time Management u2013 Time Types

Hi friends,
I am working on overtime. Pcru2019s TO01 & TO02.
When I am running the RPTIME00 program, the time type of overtime i.e. 0040 are not seen in the ZES or SALDO tables. I had booked more than planned working time for over time.
As for the overtime hrs booked the ZL table is populated.
Why the time type 0040 is not storing the Overtime values in ZES & SALDO Tables?
Regards,
Thakur

Hi Ajay,
TO01
VARSTDAYTY
0
VARSTFREE
N
HRS=S
ADDDB0900Z
The Limit we had set as S=Planned working Hrs
V_T555A
0040 - Time type Day & Period Balance
TO01 Log
Input & Output of TO01 = Planned working hrs will be transfred to Time Type u2013 0900
TO02 Log
Input of Tip Entry
u2013 Pair Types coming in based up on the Break schedule.
Out Put
-the last two entries of the pair types are with Processing class M
From     to     1   P   ID     CT    P      Ttyp     O    Number
17:25     17:50     0   3           10    M      0040    P     0,25
17:50     24:50     0   3           10    M      0040    P     7,00
Under CUMBT
Input
TES table TT Value 0040 is 0,00 hrs
Output
ZES & SALDO the time type is not displayed.
ZL
Overtime ZL is pouplated with the Wage type with 7,25 hrs.
If I delete the time type 0040 from table V_T555A & run the Time Evaluation it is not asking for the 0040 time type at all, where in TO02 we have the time type used for storing the value of over time.
In the PCR processing of the log it is sending the values to the 0040 TT. But the values are not displayed in TES<, ZES, SALDO.
Why it is not picking or checking the time type is avalible in the table V_T555A & Not storing the values any of the above tables?

SAP email configuration u2013 transaction SCOT

Our email is hosted on the outside and I am in the middle of changing hosts. The new hosting company will not accept sending STMP mail without authentication. There does not seem to be a way to specify a user ID and logon for the SMTP authentication. How are people sending emails from SAP on the AS/400?
I am one ECC 6.0, Netweaver 7.0
Thanks
Alan

Hello Alan,
I have NEVER heard on a solution, that SAP can authenticate ...
SAP is more an SMTP server (and can act as client as well) - SMTP servers are even not having authentication in their protocol.
Where do you have information, that this might work ?
(I'm pretty sure, it will not)
Would it be possible, to alow just the IP of your iSeries in this new mail server to relay without user & password ? (That would be the typical solution)
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.com http://www.4soi.de http://www.easymarketplace.de

SAP BI u2013 PI u2013 SAP R/3?

Similar Messages

Maybe you are looking for