SAP BIW - Load Schedule Map

Hi all,
I tried the new how-to paper (SAP BIW - Load Schedule Map) to greate a report to view the scheduled loadings via PCs, but some formula variables are used there, which are not defined within the howto paper.
Did somebody of you generate the report already successfully ???
And maybe you have some hints for me to define the variables (techn. name: Y....Avg_Dur_Sec).
Seams to me that there is a calculation in secondes behind it.
Thanks a lot !!!!
Best Regards from Germany,
Alex.

Hello Alexander,
Page 14 explains how to create each formula for 0-23. One thing that was not illustrated was that on Page 14 where you see the number 15 a lot, well, just be sure you make each occurence of that a number 0 when you are on 0, 1 when you are on 1, 2 when you are on 2 etc.
Also take note of what is a local formula and what is a global formula as noted in the directions.
It took me a little while, but I got it working!
Also if you chain names don't appear when you run the query, just change the display properties for the Key/Text (Long text)
I also believe you need to use Analyzer Version 7 for the definition. I couldn't find the 'TIME' function using analyzer version 3 (Although i didn't look very hard either)
Thanks,
Nick
Edited by: Nick Bertz on Apr 29, 2010 10:16 AM

Similar Messages

Query - Article - Load Schedule Map

Hi Colleagues,
There is an interesting article related to process chain load schedule map.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0a44197-e22d-2d10-1190-d9ba15118d28
I just have an issue on page 12 to determine which formula I have to write for 1, 2, 3 ... until 23.
Can some one give me explanation ?
Thanks

solved

Error when loading XSLT mapping of the application

Hi,
I am using XSLT mapping in XI.
It is working ok when I test it in Interface Mapping but it gives below error when I test end to end scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">TRANSFORMER_CONF_EX</SAP:Code>
<SAP:P1>com/cba/***.xsl</SAP:P1>
<SAP:P2>urn:**:**</SAP:P2>
<SAP:P3>450326d0-1559-11dd-99a1-d89c0a0a380b</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when loading XSLT mapping of the application</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Yes, I have activated it
Regards,
Anirudh.

hi
please assure that if you save your xslt stylesheet locally, that it is saved in UTF-8 format, before you import it.
Pls do export the imported archive as a zip file to your local disk and try opening the same. If its not then the zip file which you have uploaded might have got corrupted/is not fully uploaded.
Try activating the imported archive and do a check before you do that. This you can do with a minor change in the description or so.
reward points if found helpfull
regards
chandra.k

Scheduled Map Error: ORA-20001: Internal error ...

I have a scheduled map that is failing daily - the full error message is below. The map is for a cube. The map validates, deploys and runs SUCCESSFULLY when started from the OWB control center.
The schedule is simple: once a day @ 0600.
The Map is configured: Row Based (Target Only), No Ansi, No Optimization, No Target Load Order, Table Analzye, 500 Bulk Load, 500 commit.
The run time environment consists of: Windows Server 2003 SP1 x64, Oracle 10G x64 patched to the latest revision.
Any ideas appreciated.
Error from from Enterprize Manager 10g for the scheduled job:
ORA-20001: ORA-20001: Begin. initialize complete. l_job_audit_execution_id= 3261. execute_task complete. l_audit_execution_id= 7194. l_stream_id= 11434. ORA-20001: Internal error ORA-20001: Execution completed with 0 error(s) and 1 warning(s). ORA-06512: at "D2D_REPO_OWNER.WB_RTI_WORKFLOW_UTIL", line 769 ORA-20001: Execution completed with 0 error(s) and 1 warning(s). ORA-06512: at "D2D_WH.PGRN_WARE_MEASUREMENT_MP_JOB", line 113 ORA-20001: Internal error ORA-20001: Execution completed with 0 error(s) and 1 warning(s). ORA-06512: at "D2D_REPO_OWNER.WB_RTI_WORKFLOW_UTIL", line 769 ORA-20001: Execution completed with 0 error(s) and 1 warning(s).

OWB Control Center reports the error for the daily runs as below.
I've seen this before - when the map is configured for set based fail over to row base. The deeper meaning appears to be duplicate data in the source.
The Job details (Input Parameters) confirm that this job is running with a configuration that differs from what I've configured in the Repository - therefore I need to redeploy the map. I know I did this yesterday but somehow its wrong!
ORA-30926: unable to get a stable set of rows in the source tables

Background GATP based on LOAD Scheduling Step

Dear all,
We work with an integrated solution between ECC and APO.
During the sales Order entry, the system triggers a Background GATP in order to calculate a first MAD Date.
It seems that during this Background GATP the system doesn't read on APO side the Load Scheduling step based on the Start Location and The Means of Transport. From the condition analysis, I noticed that the system doesn't read the field Means of Transport.
The only way that I found to solve this issue was to map in the APO Customizing ( GATP => Transportation and Shipment Scheduling => Interfaces => Define assignment of Default Means of Transport to Shipping Conditions) The shipping condition to the means of Transport but this is only a one to one relation meaning that I cannot assign several MoT to the same Means of Transport.
Do you have any idea how can I try to manage that issue?
Thanks in advance for your input.
Kr,
JP

JP,
Looking at your analysis, I don't see shipping point. I quickly put this
together in my sandbox. This is what yours should look like.
You probably will only need one access, delete all that you have done so far and instead create a table for the items you mentioned above (shipping point / means of transport). Create the access from that table. .
Let me back off a bit. I suggest you THOROUGHLY read the link I provided. There is a fairly good description of all the steps you need to perform to make this work. Once you have read this, come back if you have any more questions.
Best Regards,
DB49

"Manual Planning in SAP Retail w/o MAP

Hi
Can we create "Planning Scenario in SAP Retail w/o MAP " ?
Can we do manual plannings in SAP Retail w/o BI , MAP? if so whats the limitation?
Which are possible for the following scenrios in SAP Retail w/o MAP /BI
1. Planning Scenario ( Budget Plan )
2. OAPC
3.OTB Plan
Simply, Whats the limitations of SAP Retail in Planning?
Can anyone explain me clearly and if any documents for the above will be greatful
Regards
Anis

Hi Anis,
Sorry it is not possible to do manual plannings in SAP Retail w/o BI , MAP.
It need integration with BI.
Regards
jiten

Trying to log on sap biw 3.0 from sap r/3

Dear sap professionals,
this is suresh, i am trying to logon to sap BIW 3.0 from sap r/3, to do this i used the proper Tcode. but the issue is i am getting the error message "name or password incorrect please reenter". any body knows how to make the remote connection to BIW 3.0. thanks in advance

in my case,
i got the same error..
By mistake, i touched [Caps Lock] button. ( haha )
i typed the password again.
it worked. i mean i could log on the BW system.
so i think,
we need to type <b>the password as "Capital Letters".</b>
I hope it helps you.
all the best
David.Kang

How to Extract Data from SAP and Load it into Essbase

Hi All,
Can you recommend some ways to extract data from SAP and load it into Essbase?. I have no knowledge about SAP, not sure how I can perform this task. Can I use ODI for this job?
Thanks

hi,
Not sure if this helps but give a try
you can create connection from EAS to SAP .. using a plug-in .. if you have access to oracle Support go for [ID 968961.1]
or
below are steps
1. In EASPATH\console, open components.xml in a text editor.
2. Under <PluginList>, enter <Plugin archiveName="SAP" packageName="com.essbase.eas.sap.ui"/> before the closing </PlugIn> tag.
3. Save and close the file.
4. In EASPATH\console\bin, open admincon.lax in a text editor.
5. Search for lax.class.path= and append ;..\lib\sap_client.jar;..\lib \sap_common.jar to the entry. Save and close the file.
6. In EASPATH\server\bin, open adminsvr.lax in a text editor.
7. Search for lax.nl.java.option.additional, and append -DRFC_INI=EASPATH\server\saprfc.ini. Save and close the file.
8. Create a new environment variable, RFC_INI, with a value of EASPATH\server\saprfc.ini
9. Copy librfc.dll andsapjcorfc.dll to EASPATH\server\bin. You may need to obtain these files from SAP.
let me know if it works :)

Down loaded latest Maps 3ovi on N96. program wont ...

Hi
I Down loaded latest Maps 3ovi on N96. program wont open. The task bar goe's across the screen then stops then goe's back to the main menu screen.
Can anyone help? I have uninstalled it but even maps 2 wouldn't work now .

When you used Maps Updater to install Maps 3, did it successfully install the app AND continue to delete map data and replace it?
Delete the Cities folder and the file called QF from the mass memory, then restart Maps - it should start OK and then you need to let it connect briefly to the internet. You can then redownload the maps for Maps 2 from Map Loader.
If you update again to Maps 3, check that the update process completes fully, including replacing the map data, and if not do the same thing - kill Cities and QF then restart Maps

SAP PA and SAP II Product Road Map

Hello everyone,
where can I find the latest SAP PA and SAP II product road map, based on the version SAP PA 1.17?
The latest official product road map I found is from Dec. 2013.
Thanks in advance,
BJE

Hello,
The combined roadmap for II and PA is in its final elaboration phase.
We will published it once approved.
Regards,
Didier

SAP GRC 10 - Field Mapping

Gurus,
we have defined field mapping for User type but when request got closed ....still its provisions user type "dialog" , But i have selected user type as "service" in request .
And also define field mapping for user type AC custom field with system field name USTYP and table is IS_LOGONDATA @Governance, Risk and Compliance >Access Control>Maintain Mapping for Actions and Connector Groups.
Please let me if I am missing any configuration for field mapping.
Thanks,
Jagat

Hello Aman,
Thanks for the reply.
As per my knowledge there is no direct way or configuration in GRC10 for provisioning the non-dialog useru2019s , So thatu2019s why we have created Custom field and map this field to Su01 field in SAP.
FYI u2026.We did all the configuration related to field mapping u2026but still by default itu2019s taking user type as dialog. Do you know any SAP Note related field mapping released by SAP for GRC10.
Thanks,
Jagat

Ways to load R2RML mapping file

I see we can use jena api to write a program to load r2rml mapping file into the stage table. Is there any scripts or tools doing the same thing?
Thanks.

Hi HansC,
The prepareBulk method in OracleBulkUpdatedHandler class can be used to load an RDF file (including r2rml) into a staging table.
Example 7-12 in the following document can give you some help.
http://docs.oracle.com/cd/E16655_01/appdev.121/e17895/sem_jena.htm#RDFRM472
Thanks,
Zhe Wu

Resource / Cost Loading Schedule

I am seeking some ideas about Resource Loading and Cost Loading schedules in P6.
My Resources are the subcontractors on the project. Each Subcontractor is the Resource for series of activities. The Resource Type is "Labor" and we plug Labor Units for each activity to run the "Activity Usage Profile". The unit price is $1 to avoid the warnings in the "Project Integrity Report" but not to track cost.
I need to load the schedule with "Labor" cost and "Material" cost. I assigned two more resources to every activity:
1. "Labor Cost" with "Nonlabor" resource type.
2. “Material Cost” with “Material” Resource type.
The reason why the “Labor Cost” resource is nonlabor is because I don't want P6 to add labor units for both resources (Labor Units for subcontractor and Labor Units for Labor cost)
Is there a better way to load your schedule with labor units, labor cost and material cost?
Thanks,
Fouad

You are doing right but needs a bit correction.
Total Cost = Labor + Non Labor + Material + Expenses
Earned Value Calculations are based on Total Cost and not a specific type of cost.
I suggest using Price / Unit for labor = 0 and not 1 that means labor resources will not take part in cost for Earned Value Management.
Jawad
Novo Rail, Sydney

Scheduling Mapping or Process Flows- How to?

Hi
I am able to succesfully deploy and execute mappings & PFs using control center. Now i want to test the scheduling part. How should i a schedule a mapping to run at regular intervals of time.
Regards
Vibhuti

Hi I figured out a way to schedule my mapings as explained in the below link
Scheduled Map Error: ORA-20001: Internal error ...
but when i deploy my schduled job it gives mr the follwoing errors
ORA-01749: you may not GRANT/REVOKE privileges to/from yourself
RPE-02224: Internal Error: Cannot grant privilege EXECUTE on object SPRO_OWNER.WB_RTI_WORKFLOW_UTIL to user SPRO_OWNER.
What does it mean? Do i have to give any privileges on SPRO_OWNER.WB_RTI_WORKFLOW_UTIL pakage? If yes then what privileges do i have to give?
Please let me know.
Regards
Vibhuti

License Key for SAP Central Process Scheduling by Redwood

Hi!
I installed SAP Solution Manager 7.00 EHP1 and would like to use the function
SAP Central Process Scheduling by Redwood.
Can some one tell me how to get a license and to configure this function?
Thank you very much!
regards
Thom

Dear Thom,
The procedure for procuring and installing the license is given in the Quick Install Guide for Redwood which you would have used to install the process scheduler.
Kindly follow the process and procure the license.
Regards
Amit

SAP BIW - Load Schedule Map

Similar Messages

Maybe you are looking for