SAP BO Analysis "Show Connections" option inactive

Hi all,
While trying to open a workbook or a datasource in SAP BO Analysis for Excel, I am trying to locate SAP systems which are not included in my local "SAP logon". Though, the option of "Local System" in the show connections option of SBO Analysis is my only option as the dropbox is inactive.
According to the User Guide, all other options (All/System/Cube/Infoprovider/Query/Query View) which are included in the "Connections" section are referring to Business Objects Enterprise which is not my case.
Any ideas will be much appreciated.
Thank you.

Hi,
We are using web based INI and while accessing through advance analyzer we are not able to see list of all sap systems in the sap log on pad. We are getting blank window as you see in below screen shot. Where local system is disabled, please guide me here to unable the all sap system in log on pad.
Thanks in advance.
Regards,
Mithun.

Similar Messages

Windows 8.1 do not show DISCONNECT option for VPN, why? bug? Please fix!!!

I created a VPN connection. Once I connected to the VPN in Windows 8.1, it does not show DISCONNECT option when I click on the VPN again. It just keep showing CONNECT option only. Why? This has to be a bug! Please fix!

Hi Dan5678,
Is the connection an incoming VPN connection?
If yes, then you may take a look at the KB article below:
How to disconnect an incoming VPN connection in Windows 8 and in Windows Server 2012
To disconnect an incoming VPN connection, follow these steps:
Open Network Connections. To do this, use either of the following methods:
Swipe in from the right edge of the screen, or point to the lower-right corner of the screen, and then click Search. Then, type ncpa.cpl, and then click the Ncpa.cpl icon.
Press Win+R to open the Run window, type ncpa.cpl, and then click
OK.
Right-click the incoming VPN connection that you want to disconnect, and then click
Status.
On the General tab, click Disconnect.
Close Network Connections.
Hope this may be helpful.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Open HUB ( SAP BW ) to SAP HANA through DB Connection data loading , Delete data from table option is not working Please help any one from this forum

Issue:
I have SAP BW system and SAP HANA System
SAP BW to SAP HANA connecting through a DB Connection (named HANA)
Whenever I created any Open Hub as Destination like DB Table with the help of DB Connection, table will be created at HANA Schema level ( L_F50800_D )
Executed the Open Hub service without checking DELETING Data from table option
Data loaded with 16 Records from BW to HANA same
Second time again executed from BW to HANA now 32 records came ( it is going to append )
Executed the Open Hub service with checking DELETING Data from table option
Now am getting short Dump DBIF_RSQL_TABLE_KNOWN getting
If checking in SAP BW system tio SAP BW system it is working fine ..
will this option supports through DB Connection or not ?
Please follow the attachemnet along with this discussion and help me to resolve how ?
From
Santhosh Kumar

Hi Ramanjaneyulu ,
First of all thanks for the reply ,
Here the issue is At OH level ( Definition Level - DESTINATION TAB and FIELD DEFINITION )
in that there is check box i have selected already that is what my issue even though selected also
not performing the deletion from target level .
SAP BW - to SAP HANA via DBC connection
1. first time from BW suppose 16 records - Dtp Executed -loaded up to HANA - 16 same
2. second time again executed from BW - now hana side appaended means 16+16 = 32
3. so that i used to select the check box at OH level like Deleting data from table
4. Now excuted the DTP it throws an Short Dump - DBIF_RSQL_TABLE_KNOWN
Now please tell me how to resolve this ? will this option is applicable for HANA mean to say like , deleting data from table option ...
Thanks
Santhosh Kumar

Hey, my ipad is disabled and i cant open. i tried connecting it with itunes in recovery mode to restore it but it wont work it doesnt show and options itunes doesnt detect my ipad in recovery mode. what do i do know? please help!!!

Hey, my ipad is disabled and i cant open. i tried connecting it with itunes in recovery mode to restore it but it wont work it doesnt show and options itunes doesnt detect my ipad in recovery mode. what do i do know? please help!!!

If you followed these instructions and you were unable to enter recovery mode, I'm still leaning toward a hardware problem. Also, since you have IOS-7, read this. It might help.

HT204023 How to disable personal hotspot.i upgraded to ios6 since then personal hotspot is showing connecting but it hasnt.there is no on off option.

PLease help.How to disable personal hotspot.i upgraded to ios6 since then personal hotspot is showing connecting but it hasnt.there is no on off option.

I'm using other gadget and wifi tethering works (hotspot)fine.
Already consult with cellular provider and they confirmed that the problem might be on device.
Do you think upgrading the ios might solve the problem?

Sybase connection tab not showing in New connection option in SQL developer

Hi,
I do not see a Sybase connection tab in New connection option in SQL developer 2.1 where as it was available in ver 1.5
Why is that? how to fix it?

Hi,
Have you installed the JTDS JDBC driver yet into SQL Developer.
This is required before you get the connection tab for SQL Server and Sybase.
You can install the JTDS driver from the Check For Updates action.
Regards,
Dermot
SQL Developer Team

'mass storage' connection option showing error mes...

Up until a yesterday , my phone was working fine . Then , yesterday , when I tried to connect it to my PC via the nokia-provided USB cable , things went kaput.
The phone began by working normally, asking me to select a connectivity option, while my computer gave me the message that it had detected a new MTP device , and then asked me to insert the disc that might have come with this device. I cancelled this , as always, and selected the 'mass storage' option on my phone. At this point , the phone gave me this error message :-
"Memory card in use by another application. Please wait."
and the computer , instead of treating the phone like an external storage device , began going through the same sequence of " found MTP device . Please insert disc " over and over . This is happening even after I reset my phone to factory settings. What do I do now ?
Can anyone please help ?

Are you sure you selected Mass Storage mode on your phone in the connection prompt, and not Nokia Suite / Ovi Suite / PC Suite? If you have restored your phone to factory settings and are stil having problems, then you will need to take your phone to your local Nokia Care point for them to inspect.
to locate Nokia Care: http://nokia.com/support

Unable to Access Internet Despite Adapter Showing "Connected".

Hi, I have a Lenovo "G"-Series notebook, Type 4446-38U which has suddenly stopped allowing me to access my internet connections. The PC is only about a month old. It is running XP Professional.
I have three connection options: 1) dial-up (using an onboard HDAudio Soft Data Fax Modem with Smart CP); 2) ethernet or Local Area Connection (using an onboard Broadcom Netlink Fast Ethernet); and 3) wireless (using an onboard Intel WiFi Link 5100 AGN) -- none of these components are showing that they have conflicts/problems in the System Properties/Device Manager.
At my home, which is located in a rural area where I can only get dial-up, I tried checking my e-mail last week (with Mozilla Thunderbird), but received an error notice stating that the e-mail server could not be found; it was the same issue, when I tried to get Norton virus updates (Internet Security 2009), XP updates on the Microsoft website (using Microsoft Updates with Internet Explorer), and simply accessing the web (using Mozilla Firefox) -- i.e., "Server Not Found." The odd thing is that I can not only hear the connection being made by the modem, but can also see that the device is 'Connected', when I check the connection in Control Panel/Network Connections. The following day at my office, I checked the other connection options (ethernet & WiFi), and found that I had the same problem -- i.e., they were shown as "Connected" in Control Panel/Network Connections, but I was unable to access anything on the web (e.g., e-mail, Google, virus/Microsoft updates, etc.). It's as if there is something blocking the internet connection to these programmes/utilities.
When I ran the Microsoft Networking Troubleshooter ('Diagnose Network Configuration & Run Automated Networking Tests), all the Network Adapters were shown as having passed. Ditto, when I ran the "Test a TCP/IP Configuration Using the Ping Command" -- pinging 127.0.0.1, the results showed 4 packets sent and 4 received.
I spent several hours on the phone with Lenovo Tech Support to no avail, and their instruction that I uninstall Norton Internet Security made no difference either. When they instructed me to open a Command Prompt and ping 192.168.1.1, the results showed that there were 4 packets sent and 4 received. When I was instructed to ping the IP Address for the wireless adapter, the results showed 4 packets send and 4 received. When I was instructed to ping www.google.com, the results showed that the ping request could not find the host www.google.com. Lenovo Tech Support stated that there was nothing further they could do, and that I needed to use a utility to set everything back to factory specs (i.e., have a utility programme erase everything on the hard drive and reinstall XP ... and even then I was told that there was no guarantee that would fix things, meaning that the PC would then have to be sent into their repair depot). Before I do this, I was hoping that someone here might know as to what's going on with my connection problems and how it could be fixed, without having to erase everything.
I would appreciate any insight or advice anyone might have. Thanks so much!
~ Jack

I did do a complete uninstall of Norton (i.e., didn't save any of the settings), but that didn't resolve the connection problem. I also turned off Microsoft's firewall as well, once Norton was uninstalled (it had been turned off, when Norton was installed, and once Norton was uninstalled, MS firewall defaulted back to an on/active status).
I also forgot to mention in my initial description of the problem and actions taken thus far to try and correct it, that I additionally tried the "ping" procedure described in paragraph five above in Windows Safe Mode with Networking, but was still unable to connect to the internet.

While updating to ios 6.1.2 my iphone got lock showing connect to itunes, what i have to do so not loose my all data

when i tried to update my iphone 4s from ios 5.1.1 to ios 6.1.2 connecting through other wifi personnel hotspot connection., my iphone got switch off and showing connect to itunes with "itunes round logo" and usb cabel connection
please help me what i have to do, so i should not loose my data in iphone (messages, contacts, photos and videos etc.)
also i was confused weather i should do restore my iphone through itunes, will my all data erase?
there also showing that after restore i can get back my all data and settings?
please help me
vishal.

firstly thanks for quick reply.
sorry sir,
i am confused in last line you wrote,
" This will erase the phone but you will be given an option at the end to restore to an existing backup, if you have one."
i did not understand last sentence - if i have one? you mean to say if i have data or not in my iphone?
i have many pictures, messages, contacts which are very much important.
so will it be all restore and will be backup again in my iphone if i restore?
i am extremely sorry to interrupt you again.
waiting for your quick reply
thanks and regards,
vishal

While updating my iphone software it got intruppted and now showing connect to itune not getting restored

while updating my iphone software it got intruppted and now showing connect to itune not getting restored please help

Try doing a hard reset on the phone;
1. Hold Home and Sleep/Wake buttons at the same time;
2. Wait for the Apple logo to appear (ignore the slide to Power Off option)
3. Let go of the buttons when you see Apple on the screen
4. Allow iPhone to reboot;
If you are still unable to get the phone to power on, charge, or connect to iTunes; it could possibly require service. (hardware replacement)

Windows 8.1 pro pptp vpn does not show disconnect option

I just installed Windows 8.1 PRO on my PC.
Formatted it, installed right from scratch.
Once I created my login, I then created a connection to my office VPN server.
Office VPN server is a ISA server which allows PPTP based VPN.
Well, I am able to connect and do everything that I want.
But I dont see a DISCONNECT option at all.
The metro interface after the connection is made also does not show status as "connected". It shows "connect" instead.
If you go to network and sharing center and then into adapter settings you can see you VPN connection. but the "status" column does not show "connected" but instead shows the same name of the vpn connection as seen in the "Name"
column!!
Right clicking that active connection does not show "disconnect", but shows "connect/disconnect".
Then I realized that after double clicking that VPN connection you can then see the status window, where a disconnect button does exists and clicking that does disconnect the VPN.
But this is crazy.
Why do we now have to go so deep, just to disconnect!
This never happens in windows 7, windows 7 with SP1, Windows 8
This is new to Windows 8.1
Anyone else seen this? Is there a solution ?
konkani

I just installed Windows 8.1 PRO on my PC.
Formatted it, installed right from scratch.
Once I created my login, I then created a connection to my office VPN server.
Office VPN server is a ISA server which allows PPTP based VPN.
Well, I am able to connect and do everything that I want.
But I dont see a DISCONNECT option at all.
The metro interface after the connection is made also does not show status as "connected". It shows "connect" instead.
If you go to network and sharing center and then into adapter settings you can see you VPN connection. but the "status" column does not show "connected" but instead shows the same name of the vpn connection as seen in the "Name" column!!
Right clicking that active connection does not show "disconnect", but shows "connect/disconnect".
Then I realized that after double clicking that VPN connection you can then see the status window, where a disconnect button does exists and clicking that does disconnect the VPN.
But this is crazy.
Why do we now have to go so deep, just to disconnect!
This never happens in windows 7, windows 7 with SP1, Windows 8
This is new to Windows 8.1
Anyone else seen this? Is there a solution ?
konkani
BUMP!
konkani

Verizon BB 8830 WE Unlocked Shows Connected to GSM but can't make or receive Calls (Calls to the no says Device Switched Off)

Hi!
I bought a new Verizon 8830 World Edition unlocked from ebay. I confirmed that its unlocked from MEPD command (although it says Network: ''Inactive'' instead of 'disabled').
I tried using various GSM network SIMs (India) in it and everytime, it shows an active tower and full signal levels and displays the name of the network correctly. It looks as if its connected to the GSM service at full signal.
However, placing calls fail and any call made to the number gives a 'Switched Off' message.
I am totally flummoxed and don't know what to do.
I have tried: Battery pull & Wipe out.
About: v4.5.0.186 (Platform 3.4.0.59)
I would be very very very thankful for any pointers. Please help me!

Hi Subhankar,
The Connections are ON, the Network Selection is Automatic and the Mode is GSM
The Connection is showing 'Connected', with Antenna and Full Signals, with the Name of the Network too.
I have tried disconnecting and reconnecting, pulling the battery many times. However, calls are not successful and the number remains 'switched off'.

SAP HANA Input parameters in SAP BO Analysis

Hi, dear experts.
Please help me with one problem in SAP BO Analysis. Problem is: in sap hana studio i made calculation view that has some input parameters (Param. type - Direct, Sematic Type - Date, Data type - Date). Then i made filter with this parameters in one of projection of my calculation view. When i push data preview in Hana Studio all input parameters are ready to input and they also have "Value help dialog". All is great! SAP HANA Studio version is 1.0.7000 (Build id: 386119). HANA DB version is 1.00.70.00.386119.
On workstation i installed SAP BO Analysis edition for Microsoft Office 32-bit and driver for SAP HANA 70 Client Win32, made ODBC connection to HANA server. From SAP BO Analysis I found my view and started it. I see my input parameters, and see "value help dialog", but i can't choose value: it's not available for input. Here is the problem: what i have to do to enter the parameters?
I also try to use variable but value help dialog is empty. Please help me with this issue.
Message was edited by: Tom Flanagan

Hello Andrei,
Tested on:
HANA Rev 70
Have tested for variables and the value help is coming.
Regards,
Krishna Tangudu

Show 'Print' Option not see in view property editor

I have created a new ABAP web dynpro application and am trying to integrate it into the portal (7.0). I created a view and am trying to customize the appearance of the tray it appears in so that the user can print the view. I know that in the standard ESS functions that we have (which are WD Java) I simply found the show "print" option in the property editor and made sure it was set to yes. The problem is that while all of the other options are there (Details, help, personalize, refresh, remove, etc), unfortunately I do not see a show "print" option available in the property editor of the view. Is there any way that I can get it to show up? Is there some other parameter that controls whether it should appear.
I do see the show "print" option on the page, but my users want to see it on the view.
Thanks for your help.
Pam Laverty

Hi,
It looks like you do not have write permissions to the PCD objects and thus cannot edit them.
http://help.sap.com/saphelp_nw70/helpdata/EN/f6/2604f005fd11d7b84200047582c9f7/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/f6/2604e505fd11d7b84200047582c9f7/frameset.htm
Regards,
Praveen Gudapati

My mini with IOS 7.0.6 is not showing an option for wish list in the options. What is happening?

My mini with IOS 7.0.6 is not showing an option for wish list in the options. What is happening?

The three Rs to IOS, try them in order until the issue is resolved;
Restart - Press and hold the Power button until the red Power Off stripe appears. Swipe to power off. Press and hold the Power button to turn the device back on.
Reset - Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons.
Restore - Connect the device to the Mac or PC with which it is usualy synced and use the iTunes app to restore the device to the factory settings. You can then restore the device with a previously made backup or set it up as new.

SAP BO Analysis "Show Connections" option inactive

Similar Messages

Maybe you are looking for