SAP BO PERFORMANCE ....
Dear Expert,
I am using SAP BO 4.1 and source system SAP BW 7.3.
I am creating Webi report using BICS connection.
The performance is very slow.
Please guide me..
Many Many Thans in Advance.
Regards,
Divesh Patel
(9930578182)
Hi Divyesh,
Performance should be good.
Hope you have done APS Split as recommended.
consider this blog.
Performance factors of Webi Reports in BI 4.x
Similar Messages
-
New Book on SAP BW Performance Tuning
Hi All,
Just thought of sharing this info on SDN...
A new book on SAP BW Performance Tuning is available...
http://www.erpguides.com/books/bwperformance.htm
Shreekant W Shiralkar & Bharat Patel have authored a book on SAP BW Performance Tuning. The book is based on their real life experiences on improving the system performance using various features/techniques/ideas.
I am aware that the The book covers many how-to procedures with screen shots for helping the reader to implement the performance improvement and benefit immediately. It would be interesting to read this book as a compilation of practical experiences on performance tuning .
Cheers,
AmolHi,
Read Data warehousing books written by Ralph Kimball or Bill Inmon in order to familiarize yourself with the basic concepts of data warehousing. This is the foundation of the entire thing.
Follow the SAP training materials on BW Data Warehousing, BW Reporting and BW Modeling. There are several books that can help you a lot when getting started. check this link
[http://www.amazon.com/SAP-BW-Book-List/lm/RRWM7R55RBEXQ/ref=cm_lmt_srch_f_2_rsrsrs2/103-7157721-8001426]
After you have a solid BW knowledge, start to review the help.sap.com site.
Hope this helps,
Regards,
Haritha. -
Standard BW reports for SAP HCM Performance Management
Hi all,
I'm preparing a blueprint workshop for SAP HCM Performance Management and the customer wants to see the reporting in BW. Does anyone have experience with standard BW reports for this HCM solution and could someone please provide me with screenshots of these reports?
Thanks!
Marijn van Amelsfort
SAP NLHi,
Did you get the solution?
I also have the same requirement but did not find any solution.I have posted a similar question on SDN.
Re: Require links for ESS , MSS and TMS
please reply if you have answer.
Thanks,
Ravi -
Regarding SAP system performance improvements
Dear All,
i have face the system slow problem many time.
How to improve the sap system performance?
which T code should i use?
how to use this T code.
regards,
AbhijeetDear Sir,
very very thank you for suggestion.
i found the transaction and work process which took more time.
I have check with Buffer details with ST02. there is in swap column 8 rows are red.
Regards,
Abhijeet Pawar -
SAP HCM Performance Management Reporting in Portal
Hi guys, can anybody help me by telling me what are the standard Portal reports provided by SAP HCM Performance Management in ECC 6.0 EHP4?
If possible I would also appreciate that you can send me some screenshots.
ThanksHi,
Did you get the solution?
I also have the same requirement but did not find any solution.I have posted a similar question on SDN.
Re: Require links for ESS , MSS and TMS
please reply if you have answer.
Thanks,
Ravi -
HI,
I AM USING FOLLOWING CODE IN SAP SCRIPT
/: PERFORM SUM IN PROGRAM ZSUM
/: USING ®UD-WRBTR&
/: USING ®UD-WABZG&
/: CHANGING &VAR&
/: ENDPERFORM
AND PROGRAM
FORM SUM USING TABLES IN_PAR STRUCTURE ITCSY
changing OUT_PAR STRUCTURE ITCSY.
READ TABLE IN_PAR WITH KEY NAME = VAR1.
var1_sc = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY NAME = VAR2.
var2_sc = IN_PAR-VALUE.
tot = var1_sc - var2_sc.
READ TABLE OUT_PAR WITH KEY NAME = VAR.
Out_PAR-VALUE = tot.
ENDFORM.
NOW ITS GIVING DUMP TELLING "This routine contains 3 formal para , but the current call contains 4 actual parameters." IF I COMMENT CODE IN FORM.
IF I REMOVE CODE IN FORM THEN IT GIVE SYSTAX ERROR :
& ALSO in_PAR IS NOT INTERNAL TABLE\
PLEASE HELP MEHi
You are using 2 parameters ®UD-WRBTR&
®UD-WABZG& only with perform
see the sample code and do accordingly
How to call a subroutine form SAPscripts
The Form :
/:PERFORM CDE_CENT IN PROGRAM ZKRPMM_PERFORM_Z1MEDRUCK
/:USING &EKKO-EBELN&
/:CHANGING &CDECENT&
/:ENDPERFORM
The report :
REPORT zkrpmm_perform_z1medruck .
DATA : BEGIN OF it_input_table OCCURS 10.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_input_table.
déclaration de la table output_table contenant les
variables exportées
DATA : BEGIN OF it_output_table OCCURS 0.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_output_table.
DATA : w_ebeln LIKE ekko-ebeln,
w_vbeln LIKE vbak-vbeln,
w_zcdffa LIKE vbak-zcdffa.
FORM CDE_CENT
FORM cde_cent TABLES input output.
it_input_table[] = input[].
it_output_table[] = output[].
READ TABLE it_input_table INDEX 1.
MOVE it_input_table-value TO w_ebeln.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = w_ebeln
IMPORTING
output = w_ebeln.
SELECT SINGLE zcdffa FROM ekko
INTO w_zcdffa
WHERE ebeln = w_ebeln.
it_output_table-name = 'CDECENT'.
MOVE w_zcdffa TO it_output_table-value.
MODIFY it_output_table INDEX 1.
output[] = it_output_table[].
ENDFORM.
REPORT ZMPO1 .
form get_freight tables in_par structure itcsy out_par structure itcsy.
tables: ekko,konv,t685t.
data: begin of itab occurs 0,
ebeln like ekko-ebeln,
knumv like ekko-knumv,
end of itab.
data: begin of itab1 occurs 0,
knumv like konv-knumv,
kposn like konv-kposn,
kschl like konv-kschl,
kbetr like konv-kbetr,
waers like konv-waers,
kwert like konv-kwert,
end of itab1.
data: begin of iout occurs 0,
kschl like konv-kschl,
vtext like t685t-vtext,
kbetr like konv-kbetr,
kwert like konv-kwert,
end of iout.
data v_po like ekko-ebeln.
read table in_par with key 'EKKO-EBELN'.
if sy-subrc = 0.
v_po = in_par-value.
select
ebeln
knumv
from ekko
into table itab
where ebeln = v_po.
if sy-subrc = 0.
loop at itab.
select
knumv
kposn
kschl
kbetr
waers
kwert
into table itab1
from konv
where knumv = itab-knumv and
kappl = 'M'.
endloop.
loop at itab1.
if itab1-kposn <> 0.
select single * from t685t
where kschl = itab1-kschl
and kappl = 'M'
and spras = 'EN'.
iout-vtext = t685t-vtext.
iout-kschl = itab1-kschl.
iout-kbetr = itab1-kbetr.
iout-kwert = itab1-kwert.
append iout.
clear iout.
endif.
endloop.
sort itab1 by kposn.
loop at iout.
sort iout by kschl.
if ( iout-kschl eq 'GSDC' OR
iout-kschl eq 'GSFR' OR
iout-kschl eq 'GSIR' ).
at end of kschl.
read table iout index sy-tabix.
sum.
write:/ iout-kschl,iout-vtext,iout-kwert.
out_par-name = 'A1'.
out_par-value = iout-vtext.
append out_par.
out_par-name = 'A2'.
out_par-value = iout-kwert.
append out_par.
endat.
endif.
endloop.
endif.
endif.
endform.
IN THE FORM I AM WRITING THIS CODE.
/:DEFINE &A1& = ' '
/:DEFINE &A2& = ' '
/:PERFORM GET_FREIGHT IN PROGRAM ZMFORM_PO1
/:USING &EKKO-EBELN&
/:CHANGING &A1&
/:CHANGING &A2&
/:ENDPERFORM
&A1&
&A2&
Reward points for useful Answers
Regards
Anji
Message was edited by:
Anji Reddy Vangala -
BOXI3.1- SAP Cubes-Performance
Hi all,
please let me if any body know to increase performace in subject environment (BOXI3.1- SAP Cubes-Performance).
where currently my WebI report are taking an average 2 mins 30 sec.
thanks,
reddeppa kHi Reddeppa,
when you run the Web Intelligence report how does it compare to the report in BEx Web Reporting ?
Keep in mind that when really wanting to compare you would need to put the items from the Web Intelligence query panel into the BI Query rows or columns.
thanks
Ingo -
SAP ITS Performance issues with integration
Hi All,
We wants to know about performance issues if CRM and SAP ECC6 systems connected together with SAP ITS implemented ? What are the main things to be considered or evaluated? How the above scenario can be implemented ?
Thanks in advance
RamakrishnaHi,
New SP was released in February, and now most of the new bugs should been caught ,This has a Central Note. For SP06 it's Note 1527325 - Planning and Consolidation 7.5 SP06 NetWeaver Central Note to fix any issues. Most of the improvements in SP06 were related to performance, especially when logging on from the BPC clients.There you should be able to find a big list of fixes/improvements and Notes that describe those. Some of the Notes even have test description how to reproduce that issue in the old version.
hope this will help you
Regards
Rv -
From where can I get information or documents how to do performance tuning in SAP CRM?
Hi, Performance Tuning a SAP system is unique in every environment, also there are many area's in SAP to tune even area's outside SAP, eg... your Operating System/Network/Client Machines/Virtual Landscape/Cloud.
I recommend that you engage in a performance testing execise which will identify what area of your SAP Landscape needs tuning, first you need to identify the bottleneck before you can tune it.
The way the question was posed is exactly the same as wanting to fix a car but you have no idea which part of the car to fix...
*LoadRunner is an excellent tool to simulate virtual work load on an SAP environment*
Regards
Sodick25
http://www.2createawebsite.co.za
Edited by: Sodick25 on Aug 15, 2011 11:58 AM
Edited by: Sodick25 on Aug 15, 2011 11:59 AM -
SAP Netweaver Performance Tuning
Guys,
I am good in SAP J2EE Engine Performance Tuning. I would like to learn SAP ABAP Based Server Performance tuning end to end. Please recommend me some links/docs to start with the performance tuning for different OS like HP-UX/AIX & for Databases : Oracle/MaxDB etc.
Thank you in advance.
Cheers, KarthickHi Karthick, for example for SAP with Oracle on AIX -->
white paper -->
http://www-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/WP100377
But SAP with Oracle tuning are usually not very much dependent on the platform, of course there are differences but they are not much.
Personally, I bought the SAP Performance Optimization Guide -->
http://www.sap-press.com/products/SAP-Performance-Optimization-Guide-(5th-Edition).html?
and SAP Database Administration with Oracle
http://www.sap-press.com/products/SAP-Database-Administration-with-Oracle.html
Nice books. Regards. -
In sap bi performance tuning option is considered in cube not in ods, why?
details about
indexes,partitions,aggregates,compression,roll up
how these are helping to increase system performance
why ods is not suitable?Hi,
Generally we do performance tuning on the cubes as most of the reportings are done on the cubes hpowever in case of DSO also we can increase the performance by creating indexes of deactivating SID generation flag if there is no reporting on the DSO.
Following 2 links will show you different aspects of performance tuning :-
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/404544e7-83c9-2e10-7b80-a24d5099ce3f
For LID and High Cardinality
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/005f3197-d3da-2e10-1a94-a5c62342f2aa
You may create aggregates on the cube if some of IO are being used in the query very frequently to enhance the performce of query execution.
Navesh -
SAP Personas - Performance Testing using LR
Hi,
We are attempting to do Performance Testing on SAP Personas. For that end, we are trying to create some script using LR. However, there is a parameter which seems to contain some session information and we have been unable to locate it on the server response in order to correlate it.
This is the parameter I am referring to which appears on the LR recording:
web_custom_request
("xml",
"URL=http://myserver:8001/sap(cz1TSUQlM2FBTk9OJTNhc2FweHJhX1hSQV8wMSUzYTRvUElUSmNyX2x3VmhwRkJ2aHhMT1RDQzVsbGxOZFZULS1JZjBIUVktQVR)/restgui/batch/xml",
At this point, the script fails with a HTTP 400 message.
I found certain similarity between the string above and the one on included on a cookie, almost at the start of the recording:
set-cookie: sap-appcontext=c2FwLXNlc3Npb25pZD1TSUQlM2FBTk9OJTNhc2FweHJhX1hSQV8wMSUzYTRvUElZNER1YnB6Wk9mNlV2dExtbDJTOWwxbGxOZFZUOXZKQjBXckItQVRU; path=/sap(bD1lbiZjPTEwMA==)/bc/bsp/persos/mainapp
Notice how from the strings match on 40+ characters...
As for the other part of the sting, it does not appear anywhere on the server response.
Any ideas would be greatly appreciated!
BTW, we are using LR 11.00Hi Ricardo,
I have never worked with LR but I can help you understanding the sequence of requests.
Before the first post request ending with restgui/batch/xml is sent, there should be a get request ending with /restgui/newsession?sap-client=XXX. The response to this request contains the session ID you are looking for in its body.
Cheers,
Tobias. -
SAP BPC PERFORMANCE AND DESIGN SUBJECT
Hello experts, i ahve an issue about the design of an application in SAP BUSINESSOBJECTS bpc7 for nw7, since there are three applications those have tobe within a same appset,and they use almost the same dimensions, there are two options:
1.-to unify the 3 applications separately in a same appset, which implies 3 cubes in bi7 backend, and they will ask data from each other
2.-to unify the 3 applications in a same appset, and within the same application, which implies one cube in bi7 backend, and all the information will be inside this cube
Which implications has each of this options in performance, anda complexity of implementation, which would be better?
Best regardsHi,
I would suggest you post the question into the EPM / BPC area as this forum is about the BI part of BusinessObjects
ingo -
How to measure the sap system performance
hi experts ,
i want to understand how the system performance is calculated in sap. for example " How system , database performances are calculated by sap in SE30, SCI - sap code inspector " ...
With regards ,
James..
Valuable answers will be rewarded...Hi James,
Check these links, they will help you
http://help.sap.com/saphelp_nw04s/helpdata/en/8a/3b834014d26f1de10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/d1/801f7c454211d189710000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d1/801f7c454211d189710000e8322d00/frameset.htm
Thanks
Janani
award points if helpful -
SAP standard performance&healthy reference indexes values
Dear Gurus,
In EWA report there are many sys performance & healthy indexes (see the list below).
We can evaluate the system's healthy status through them.
But we have to know the SAP standard reference values first.
My question is where I can find out the standard reference values for all of the indexes? (or some of the most important ones of them)
For instance , The index 'Reference for Avg. Response Time (ms) ' for DIA task is 1600ms.
Average Response Time/Dialog Step(ms)
Average Wait Time Per Dialog Step(ms)
AVerage Roll In Time(ms)
Average Load And Generation Time(ms)
Average Database Time Per Dialog Step(ms)
Average Processing Time Per Dialog Step(ms)
Average Roll Wait Time(ms)
Average GUI Time Per Dialog Step(ms)
AVerage CPU Time(ms)
Average DB Procedure Call Time/Transaction.(ms)
Average Lock Time Per Dialog Stepz(ms)
Average RFC Interface Time(ms)
Average Frontend Network Time(ms)
Requested Data(KB)
Number Of Roundtrips
Number Of VMC Calls
Total VMC CPU Time(s)
Total VMC Elapsed Time(s)
Average VMC CPU Time(ms)
Average VMC Elapsed Time(ms)
Number Of Dialog Steps
Thank you very much!
JasonHello Pravin Challa,
I've read the webpasges you offered.
I've learnt a lot from your help.
But there are still terms some terms confused me.
At the part 'Analysis of DB SQL CACHE' of our EWA report.
I can undstand some terms clearly. For instance,
'CPU Load [%]','I/O Load [%]','Elapsed Time [%]','Executions','Records Processed'.
I want to know their specific definition, computing interval and the unit of their value.
Thanks!
Jason
Maybe you are looking for
-
How can I disable POST GOODS RECEIPT button in transactions VL31N/VL32N via Authorization or Role Level, There is a requirement from my client and i propose two methode 1- Creation of Ztcode ZVL32N and do changes ABAP program level 2- Disablement vi
-
Mount Points in Windows 2012 R2 Cluster not displaying correctly
Hi, Try and I might, I can't get Mount Points displayed properly in a Windows 2012 R2 cluster. In Windows 2008 R2, I added them, and they appear under Storage, as for Example, Cluster Disk 7: Mounted Volume (S:\SYSDB). (I may have had to bring them o
-
Cannot access help file from iPhoto
IPhotos cannot access iPhoto's tutorial from the apps help window. Apple diagnostics indicates my network is functional and passes diagnostics. iPhoto cannot access my wifi network. The message also says to check back later. Howie
-
After last update apps have been slower and crashing
whats wrong with this update that keeps crashing my apps for no reason. My iPad is now slower and sometimes just freezes
-
E